From: Vasanthakumar Thiagarajan <vasanth@atheros.com>
To: <linville@tuxdriver.com>
Cc: <linux-wireless@vger.kernel.org>
Subject: [PATCH 04/26] ath9k_hw: Initialize mode registers for AR9485
Date: Tue, 30 Nov 2010 23:32:33 -0800 [thread overview]
Message-ID: <1291188775-13707-5-git-send-email-vasanth@atheros.com> (raw)
In-Reply-To: <1291188775-13707-1-git-send-email-vasanth@atheros.com>
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
---
drivers/net/wireless/ath/ath9k/ar9003_hw.c | 195 ++++++++++++++++++----------
1 files changed, 129 insertions(+), 66 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_hw.c b/drivers/net/wireless/ath/ath9k/ar9003_hw.c
index 0e3e259..f01c289 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_hw.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_hw.c
@@ -17,6 +17,7 @@
#include "hw.h"
#include "ar9003_mac.h"
#include "ar9003_2p2_initvals.h"
+#include "ar9485_initvals.h"
/* General hardware code for the AR9003 hadware family */
@@ -39,72 +40,134 @@ static bool ar9003_hw_macversion_supported(u32 macversion)
*/
static void ar9003_hw_init_mode_regs(struct ath_hw *ah)
{
- /* mac */
- INIT_INI_ARRAY(&ah->iniMac[ATH_INI_PRE], NULL, 0, 0);
- INIT_INI_ARRAY(&ah->iniMac[ATH_INI_CORE],
- ar9300_2p2_mac_core,
- ARRAY_SIZE(ar9300_2p2_mac_core), 2);
- INIT_INI_ARRAY(&ah->iniMac[ATH_INI_POST],
- ar9300_2p2_mac_postamble,
- ARRAY_SIZE(ar9300_2p2_mac_postamble), 5);
-
- /* bb */
- INIT_INI_ARRAY(&ah->iniBB[ATH_INI_PRE], NULL, 0, 0);
- INIT_INI_ARRAY(&ah->iniBB[ATH_INI_CORE],
- ar9300_2p2_baseband_core,
- ARRAY_SIZE(ar9300_2p2_baseband_core), 2);
- INIT_INI_ARRAY(&ah->iniBB[ATH_INI_POST],
- ar9300_2p2_baseband_postamble,
- ARRAY_SIZE(ar9300_2p2_baseband_postamble), 5);
-
- /* radio */
- INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_PRE], NULL, 0, 0);
- INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_CORE],
- ar9300_2p2_radio_core,
- ARRAY_SIZE(ar9300_2p2_radio_core), 2);
- INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_POST],
- ar9300_2p2_radio_postamble,
- ARRAY_SIZE(ar9300_2p2_radio_postamble), 5);
-
- /* soc */
- INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_PRE],
- ar9300_2p2_soc_preamble,
- ARRAY_SIZE(ar9300_2p2_soc_preamble), 2);
- INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_CORE], NULL, 0, 0);
- INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_POST],
- ar9300_2p2_soc_postamble,
- ARRAY_SIZE(ar9300_2p2_soc_postamble), 5);
-
- /* rx/tx gain */
- INIT_INI_ARRAY(&ah->iniModesRxGain,
- ar9300Common_rx_gain_table_2p2,
- ARRAY_SIZE(ar9300Common_rx_gain_table_2p2), 2);
- INIT_INI_ARRAY(&ah->iniModesTxGain,
- ar9300Modes_lowest_ob_db_tx_gain_table_2p2,
- ARRAY_SIZE(ar9300Modes_lowest_ob_db_tx_gain_table_2p2),
- 5);
-
- /* Load PCIE SERDES settings from INI */
-
- /* Awake Setting */
-
- INIT_INI_ARRAY(&ah->iniPcieSerdes,
- ar9300PciePhy_pll_on_clkreq_disable_L1_2p2,
- ARRAY_SIZE(ar9300PciePhy_pll_on_clkreq_disable_L1_2p2),
- 2);
-
- /* Sleep Setting */
-
- INIT_INI_ARRAY(&ah->iniPcieSerdesLowPower,
- ar9300PciePhy_clkreq_enable_L1_2p2,
- ARRAY_SIZE(ar9300PciePhy_clkreq_enable_L1_2p2),
- 2);
-
- /* Fast clock modal settings */
- INIT_INI_ARRAY(&ah->iniModesAdditional,
- ar9300Modes_fast_clock_2p2,
- ARRAY_SIZE(ar9300Modes_fast_clock_2p2),
- 3);
+ if (AR_SREV_9485(ah)) {
+ /* mac */
+ INIT_INI_ARRAY(&ah->iniMac[ATH_INI_PRE], NULL, 0, 0);
+ INIT_INI_ARRAY(&ah->iniMac[ATH_INI_CORE],
+ ar9485_1_0_mac_core,
+ ARRAY_SIZE(ar9485_1_0_mac_core), 2);
+ INIT_INI_ARRAY(&ah->iniMac[ATH_INI_POST],
+ ar9485_1_0_mac_postamble,
+ ARRAY_SIZE(ar9485_1_0_mac_postamble), 5);
+
+ /* bb */
+ INIT_INI_ARRAY(&ah->iniBB[ATH_INI_PRE], ar9485_1_0,
+ ARRAY_SIZE(ar9485_1_0), 2);
+ INIT_INI_ARRAY(&ah->iniBB[ATH_INI_CORE],
+ ar9485_1_0_baseband_core,
+ ARRAY_SIZE(ar9485_1_0_baseband_core), 2);
+ INIT_INI_ARRAY(&ah->iniBB[ATH_INI_POST],
+ ar9485_1_0_baseband_postamble,
+ ARRAY_SIZE(ar9485_1_0_baseband_postamble), 5);
+
+ /* radio */
+ INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_PRE], NULL, 0, 0);
+ INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_CORE],
+ ar9485_1_0_radio_core,
+ ARRAY_SIZE(ar9485_1_0_radio_core), 2);
+ INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_POST],
+ ar9485_1_0_radio_postamble,
+ ARRAY_SIZE(ar9485_1_0_radio_postamble), 2);
+
+ /* soc */
+ INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_PRE],
+ ar9485_1_0_soc_preamble,
+ ARRAY_SIZE(ar9485_1_0_soc_preamble), 2);
+ INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_CORE], NULL, 0, 0);
+ INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_POST], NULL, 0, 0);
+
+ /* rx/tx gain */
+ INIT_INI_ARRAY(&ah->iniModesRxGain,
+ ar9485Common_rx_gain_1_0,
+ ARRAY_SIZE(ar9485Common_rx_gain_1_0), 2);
+ INIT_INI_ARRAY(&ah->iniModesTxGain,
+ ar9485Modes_lowest_ob_db_tx_gain_1_0,
+ ARRAY_SIZE(ar9485Modes_lowest_ob_db_tx_gain_1_0),
+ 5);
+
+ /* Load PCIE SERDES settings from INI */
+
+ /* Awake Setting */
+
+ INIT_INI_ARRAY(&ah->iniPcieSerdes,
+ ar9485_1_0_pcie_phy_pll_on_clkreq_disable_L1,
+ ARRAY_SIZE(ar9485_1_0_pcie_phy_pll_on_clkreq_disable_L1),
+ 2);
+
+ /* Sleep Setting */
+
+ INIT_INI_ARRAY(&ah->iniPcieSerdesLowPower,
+ ar9485_1_0_pcie_phy_pll_on_clkreq_enable_L1,
+ ARRAY_SIZE(ar9485_1_0_pcie_phy_pll_on_clkreq_enable_L1),
+ 2);
+ } else {
+ /* mac */
+ INIT_INI_ARRAY(&ah->iniMac[ATH_INI_PRE], NULL, 0, 0);
+ INIT_INI_ARRAY(&ah->iniMac[ATH_INI_CORE],
+ ar9300_2p2_mac_core,
+ ARRAY_SIZE(ar9300_2p2_mac_core), 2);
+ INIT_INI_ARRAY(&ah->iniMac[ATH_INI_POST],
+ ar9300_2p2_mac_postamble,
+ ARRAY_SIZE(ar9300_2p2_mac_postamble), 5);
+
+ /* bb */
+ INIT_INI_ARRAY(&ah->iniBB[ATH_INI_PRE], NULL, 0, 0);
+ INIT_INI_ARRAY(&ah->iniBB[ATH_INI_CORE],
+ ar9300_2p2_baseband_core,
+ ARRAY_SIZE(ar9300_2p2_baseband_core), 2);
+ INIT_INI_ARRAY(&ah->iniBB[ATH_INI_POST],
+ ar9300_2p2_baseband_postamble,
+ ARRAY_SIZE(ar9300_2p2_baseband_postamble), 5);
+
+ /* radio */
+ INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_PRE], NULL, 0, 0);
+ INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_CORE],
+ ar9300_2p2_radio_core,
+ ARRAY_SIZE(ar9300_2p2_radio_core), 2);
+ INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_POST],
+ ar9300_2p2_radio_postamble,
+ ARRAY_SIZE(ar9300_2p2_radio_postamble), 5);
+
+ /* soc */
+ INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_PRE],
+ ar9300_2p2_soc_preamble,
+ ARRAY_SIZE(ar9300_2p2_soc_preamble), 2);
+ INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_CORE], NULL, 0, 0);
+ INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_POST],
+ ar9300_2p2_soc_postamble,
+ ARRAY_SIZE(ar9300_2p2_soc_postamble), 5);
+
+ /* rx/tx gain */
+ INIT_INI_ARRAY(&ah->iniModesRxGain,
+ ar9300Common_rx_gain_table_2p2,
+ ARRAY_SIZE(ar9300Common_rx_gain_table_2p2), 2);
+ INIT_INI_ARRAY(&ah->iniModesTxGain,
+ ar9300Modes_lowest_ob_db_tx_gain_table_2p2,
+ ARRAY_SIZE(ar9300Modes_lowest_ob_db_tx_gain_table_2p2),
+ 5);
+
+ /* Load PCIE SERDES settings from INI */
+
+ /* Awake Setting */
+
+ INIT_INI_ARRAY(&ah->iniPcieSerdes,
+ ar9300PciePhy_pll_on_clkreq_disable_L1_2p2,
+ ARRAY_SIZE(ar9300PciePhy_pll_on_clkreq_disable_L1_2p2),
+ 2);
+
+ /* Sleep Setting */
+
+ INIT_INI_ARRAY(&ah->iniPcieSerdesLowPower,
+ ar9300PciePhy_clkreq_enable_L1_2p2,
+ ARRAY_SIZE(ar9300PciePhy_clkreq_enable_L1_2p2),
+ 2);
+
+ /* Fast clock modal settings */
+ INIT_INI_ARRAY(&ah->iniModesAdditional,
+ ar9300Modes_fast_clock_2p2,
+ ARRAY_SIZE(ar9300Modes_fast_clock_2p2),
+ 3);
+ }
}
static void ar9003_tx_gain_table_apply(struct ath_hw *ah)
--
1.7.0.4
next prev parent reply other threads:[~2010-12-01 7:33 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-01 7:32 [PATCH 00/26] Add support for AR9485 Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 01/26] ath9k_hw: Define hw version macros " Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 02/26] ath9k_hw: Add initvals.h " Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 03/26] ath9k_hw: Enable hw initialization " Vasanthakumar Thiagarajan
2010-12-01 7:32 ` Vasanthakumar Thiagarajan [this message]
2010-12-01 7:32 ` [PATCH 05/26] ath9k_hw: Initialize tx/rx gain table from initvals.h " Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 06/26] ath9k_hw: Eeeprom changes " Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 07/26] ath9k_hw: Disable LDPC " Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 08/26] ath9k: Disable TX STBC " Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 09/26] ath9k: Enable extended synch for AR9485 to fix L0s recovery issue Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 10/26] ath9k: Configure pll control for AR9485 Vasanthakumar Thiagarajan
2010-12-01 16:39 ` Felix Fietkau
2010-12-02 5:05 ` Vasanthakumar Thiagarajan
2010-12-02 5:09 ` Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 11/26] ath9k_hw: Find chansel of AR_PHY_65NM_CH0_SYNTH7 from an array " Vasanthakumar Thiagarajan
2010-12-01 16:45 ` Felix Fietkau
2010-12-02 5:43 ` Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 12/26] ath9k_hw: Add a helper function to get spur channel pointer from cal data for AR9003 family Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 13/26] ath9k: Read spur channel information from eeprom for AR9485 Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 14/26] ath9k_hw: Configure xpa bias level " Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 15/26] ath9k_hw: Read and configure antenna diversity control " Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 16/26] ath9k_hw: Configure attenuation control only for chain 0 on AR9485 Vasanthakumar Thiagarajan
2010-12-01 16:50 ` Felix Fietkau
2010-12-02 5:13 ` Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 17/26] ath9k_hw: Configure internal regulator for AR9485 Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 18/26] ath9k_hw: Read and configure turnning caps to regulate freq accuracy Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 19/26] ath9k_hw: Configure power control only for chain 0 on AR9485 Vasanthakumar Thiagarajan
2010-12-01 16:51 ` Felix Fietkau
2010-12-01 7:32 ` [PATCH 20/26] ath9k_hw: Program appropriate chianmask for AR9485 before starting AGC/IQ cal Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 21/26] ath9k_hw: Define IQcal correction coefficient registers using index Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 22/26] ath9k_hw: Add IQ cal changes for AR9485 Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 23/26] ath9k_hw: Program appropriate register for temperature compensation cal " Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 24/26] ath9k_hw: Setup paprd only for chain 0 on AR9485 Vasanthakumar Thiagarajan
2010-12-01 16:52 ` Felix Fietkau
2010-12-01 7:32 ` [PATCH 25/26] ath9k_hw: Disable MRC CCK for AR9485 Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 26/26] ath9k: Add device id of AR9485 to pci table Vasanthakumar Thiagarajan
2010-12-01 7:52 ` [PATCH 00/26] Add support for AR9485 Luis R. Rodriguez
2010-12-01 8:36 ` Vasanthakumar Thiagarajan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1291188775-13707-5-git-send-email-vasanth@atheros.com \
--to=vasanth@atheros.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).