From: Vasanthakumar Thiagarajan <vasanth@atheros.com>
To: <linville@tuxdriver.com>
Cc: <linux-wireless@vger.kernel.org>
Subject: [PATCH V2 10/27] ath9k_hw: Find the maximum number of chains that hw supports
Date: Thu, 2 Dec 2010 03:06:54 -0800 [thread overview]
Message-ID: <1291288031-3409-11-git-send-email-vasanth@atheros.com> (raw)
In-Reply-To: <1291288031-3409-1-git-send-email-vasanth@atheros.com>
Have it in ah->caps. This will be used during various
calibrations.
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
---
drivers/net/wireless/ath/ath9k/hw.c | 14 +++++++++++++-
drivers/net/wireless/ath/ath9k/hw.h | 2 ++
2 files changed, 15 insertions(+), 1 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index b1d3c1e..ddbd6fb 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1777,7 +1777,7 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah)
struct ath_btcoex_hw *btcoex_hw = &ah->btcoex_hw;
u16 capField = 0, eeval;
- u8 ant_div_ctl1;
+ u8 ant_div_ctl1, tx_chainmask, rx_chainmask;
eeval = ah->eep_ops->get_eeprom(ah, EEP_REG_0);
regulatory->current_rd = eeval;
@@ -1989,6 +1989,18 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah)
pCap->pcie_lcr_offset = 0x80;
}
+ tx_chainmask = pCap->tx_chainmask;
+ rx_chainmask = pCap->rx_chainmask;
+ while (tx_chainmask || rx_chainmask) {
+ if (tx_chainmask & BIT(0))
+ pCap->max_txchains++;
+ if (rx_chainmask & BIT(0))
+ pCap->max_rxchains++;
+
+ tx_chainmask >>= 1;
+ rx_chainmask >>= 1;
+ }
+
return 0;
}
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 1eb6a14..bd0717e 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -200,6 +200,8 @@ struct ath9k_hw_capabilities {
u16 rts_aggr_limit;
u8 tx_chainmask;
u8 rx_chainmask;
+ u8 max_txchains;
+ u8 max_rxchains;
u16 tx_triglevel_max;
u16 reg_cap;
u8 num_gpio_pins;
--
1.7.0.4
next prev parent reply other threads:[~2010-12-02 11:11 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-02 11:06 [PATCH V2 00/27] Add support for AR9485 Vasanthakumar Thiagarajan
2010-12-02 11:06 ` [PATCH V2 01/27] ath9k_hw: Define hw version macros " Vasanthakumar Thiagarajan
2010-12-02 11:06 ` [PATCH V2 02/27] ath9k_hw: Add initvals.h " Vasanthakumar Thiagarajan
2010-12-02 11:06 ` [PATCH V2 03/27] ath9k_hw: Enable hw initialization " Vasanthakumar Thiagarajan
2010-12-02 11:06 ` [PATCH V2 04/27] ath9k_hw: Initialize mode registers " Vasanthakumar Thiagarajan
2010-12-02 11:06 ` [PATCH V2 05/27] ath9k_hw: Initialize tx/rx gain table from initvals.h " Vasanthakumar Thiagarajan
2010-12-02 11:06 ` [PATCH V2 06/27] ath9k_hw: Eeeprom changes " Vasanthakumar Thiagarajan
2010-12-02 11:06 ` [PATCH V2 07/27] ath9k_hw: Disable LDPC " Vasanthakumar Thiagarajan
2010-12-02 11:06 ` [PATCH V2 08/27] ath9k: Disable TX STBC " Vasanthakumar Thiagarajan
2010-12-02 11:06 ` [PATCH V2 09/27] ath9k: Enable extended synch for AR9485 to fix L0s recovery issue Vasanthakumar Thiagarajan
2010-12-02 11:06 ` Vasanthakumar Thiagarajan [this message]
2010-12-02 11:06 ` [PATCH V2 11/27] ath9k_hw: Configure pll control for AR9485 Vasanthakumar Thiagarajan
2010-12-02 11:06 ` [PATCH V2 12/27] ath9k_hw: Find chansel of AR_PHY_65NM_CH0_SYNTH7 from an array " Vasanthakumar Thiagarajan
2010-12-03 1:45 ` Felix Fietkau
2010-12-03 4:50 ` Vasanthakumar Thiagarajan
2010-12-03 12:14 ` Felix Fietkau
2010-12-03 12:40 ` Vasanthakumar Thiagarajan
2010-12-03 12:48 ` Felix Fietkau
2010-12-06 6:03 ` Vasanthakumar Thiagarajan
2010-12-06 10:42 ` Felix Fietkau
2010-12-06 11:44 ` Vasanthakumar Thiagarajan
2010-12-06 11:50 ` Felix Fietkau
2010-12-06 11:54 ` Vasanthakumar Thiagarajan
2010-12-06 11:51 ` Johannes Berg
2010-12-02 11:06 ` [PATCH V2 13/27] ath9k_hw: Add a helper function to get spur channel pointer from cal data for AR9003 family Vasanthakumar Thiagarajan
2010-12-02 11:06 ` [PATCH V2 14/27] ath9k_hw: Read spur channel information from eeprom for AR9485 Vasanthakumar Thiagarajan
2010-12-02 11:06 ` [PATCH V2 15/27] ath9k_hw: Configure xpa bias level " Vasanthakumar Thiagarajan
2010-12-02 11:07 ` [PATCH V2 16/27] ath9k_hw: Read and configure antenna diversity control " Vasanthakumar Thiagarajan
2010-12-02 11:22 ` Julian Calaby
2010-12-02 12:09 ` Vasanthakumar Thiagarajan
2010-12-02 12:16 ` Julian Calaby
2010-12-02 12:21 ` Vasanthakumar Thiagarajan
2010-12-02 12:29 ` Julian Calaby
2010-12-02 11:07 ` [PATCH V2 17/27] ath9k_hw: Configure attenuation control only for supported chains Vasanthakumar Thiagarajan
2010-12-02 11:07 ` [PATCH V2 18/27] ath9k_hw: Configure internal regulator for AR9485 Vasanthakumar Thiagarajan
2010-12-02 11:07 ` [PATCH V2 19/27] ath9k_hw: Read and configure turnning caps to regulate freq accuracy Vasanthakumar Thiagarajan
2010-12-02 11:07 ` [PATCH V2 20/27] ath9k_hw: Configure power control only for the supported chains Vasanthakumar Thiagarajan
2010-12-02 11:07 ` [PATCH V2 21/27] ath9k_hw: Program appropriate chianmask for AR9485 before starting AGC/IQ cal Vasanthakumar Thiagarajan
2010-12-02 11:07 ` [PATCH V2 22/27] ath9k_hw: Define IQcal correction coefficient registers using index Vasanthakumar Thiagarajan
2010-12-02 11:07 ` [PATCH V2 23/27] ath9k_hw: Add IQ cal changes for AR9485 Vasanthakumar Thiagarajan
2010-12-02 11:07 ` [PATCH V2 24/27] ath9k_hw: Program appropriate register for temperature compensation cal " Vasanthakumar Thiagarajan
2010-12-02 11:07 ` [PATCH V2 25/27] ath9k_hw: Setup paprd only for supported chains Vasanthakumar Thiagarajan
2010-12-02 11:07 ` [PATCH V2 26/27] ath9k_hw: Disable MRC CCK for AR9485 Vasanthakumar Thiagarajan
2010-12-02 11:07 ` [PATCH V2 27/27] ath9k: Add device id of AR9485 to pci table Vasanthakumar Thiagarajan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1291288031-3409-11-git-send-email-vasanth@atheros.com \
--to=vasanth@atheros.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).