From: Vasanthakumar Thiagarajan <vasanth@atheros.com>
To: <linville@tuxdriver.com>
Cc: <linux-wireless@vger.kernel.org>
Subject: [PATCH V2 19/27] ath9k_hw: Read and configure turnning caps to regulate freq accuracy
Date: Thu, 2 Dec 2010 03:07:03 -0800 [thread overview]
Message-ID: <1291288031-3409-20-git-send-email-vasanth@atheros.com> (raw)
In-Reply-To: <1291288031-3409-1-git-send-email-vasanth@atheros.com>
Right now it is done for only AR9485, will be done for ar9003 also
after proper testing.
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
---
drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 16 ++++++++++++++++
drivers/net/wireless/ath/ath9k/ar9003_phy.h | 6 ++++++
2 files changed, 22 insertions(+), 0 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index e7ba662..82c628a 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -3736,6 +3736,20 @@ static void ar9003_hw_internal_regulator_apply(struct ath_hw *ah)
}
+static void ar9003_hw_apply_tuning_caps(struct ath_hw *ah)
+{
+ struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
+ u8 tuning_caps_param = eep->baseEepHeader.params_for_tuning_caps[0];
+
+ if (eep->baseEepHeader.featureEnable & 0x40) {
+ tuning_caps_param &= 0x7f;
+ REG_RMW_FIELD(ah, AR_CH0_XTAL, AR_CH0_XTAL_CAPINDAC,
+ tuning_caps_param);
+ REG_RMW_FIELD(ah, AR_CH0_XTAL, AR_CH0_XTAL_CAPOUTDAC,
+ tuning_caps_param);
+ }
+}
+
static void ath9k_hw_ar9300_set_board_values(struct ath_hw *ah,
struct ath9k_channel *chan)
{
@@ -3744,6 +3758,8 @@ static void ath9k_hw_ar9300_set_board_values(struct ath_hw *ah,
ar9003_hw_drive_strength_apply(ah);
ar9003_hw_atten_apply(ah, chan);
ar9003_hw_internal_regulator_apply(ah);
+ if (AR_SREV_9485(ah))
+ ar9003_hw_apply_tuning_caps(ah);
}
static void ath9k_hw_ar9300_set_addac(struct ath_hw *ah,
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.h b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
index 8de3ffd..4c64eb1 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
@@ -598,6 +598,12 @@
#define AR_CH0_TOP2_XPABIASLVL 0xf000
#define AR_CH0_TOP2_XPABIASLVL_S 12
+#define AR_CH0_XTAL (AR_SREV_9485(ah) ? 0x16290 : 0x16294)
+#define AR_CH0_XTAL_CAPINDAC 0x7f000000
+#define AR_CH0_XTAL_CAPINDAC_S 24
+#define AR_CH0_XTAL_CAPOUTDAC 0x00fe0000
+#define AR_CH0_XTAL_CAPOUTDAC_S 17
+
#define AR_PHY_PMU1 0x16c40
#define AR_PHY_PMU1_PWD 0x1
#define AR_PHY_PMU1_PWD_S 0
--
1.7.0.4
next prev parent reply other threads:[~2010-12-02 11:14 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-02 11:06 [PATCH V2 00/27] Add support for AR9485 Vasanthakumar Thiagarajan
2010-12-02 11:06 ` [PATCH V2 01/27] ath9k_hw: Define hw version macros " Vasanthakumar Thiagarajan
2010-12-02 11:06 ` [PATCH V2 02/27] ath9k_hw: Add initvals.h " Vasanthakumar Thiagarajan
2010-12-02 11:06 ` [PATCH V2 03/27] ath9k_hw: Enable hw initialization " Vasanthakumar Thiagarajan
2010-12-02 11:06 ` [PATCH V2 04/27] ath9k_hw: Initialize mode registers " Vasanthakumar Thiagarajan
2010-12-02 11:06 ` [PATCH V2 05/27] ath9k_hw: Initialize tx/rx gain table from initvals.h " Vasanthakumar Thiagarajan
2010-12-02 11:06 ` [PATCH V2 06/27] ath9k_hw: Eeeprom changes " Vasanthakumar Thiagarajan
2010-12-02 11:06 ` [PATCH V2 07/27] ath9k_hw: Disable LDPC " Vasanthakumar Thiagarajan
2010-12-02 11:06 ` [PATCH V2 08/27] ath9k: Disable TX STBC " Vasanthakumar Thiagarajan
2010-12-02 11:06 ` [PATCH V2 09/27] ath9k: Enable extended synch for AR9485 to fix L0s recovery issue Vasanthakumar Thiagarajan
2010-12-02 11:06 ` [PATCH V2 10/27] ath9k_hw: Find the maximum number of chains that hw supports Vasanthakumar Thiagarajan
2010-12-02 11:06 ` [PATCH V2 11/27] ath9k_hw: Configure pll control for AR9485 Vasanthakumar Thiagarajan
2010-12-02 11:06 ` [PATCH V2 12/27] ath9k_hw: Find chansel of AR_PHY_65NM_CH0_SYNTH7 from an array " Vasanthakumar Thiagarajan
2010-12-03 1:45 ` Felix Fietkau
2010-12-03 4:50 ` Vasanthakumar Thiagarajan
2010-12-03 12:14 ` Felix Fietkau
2010-12-03 12:40 ` Vasanthakumar Thiagarajan
2010-12-03 12:48 ` Felix Fietkau
2010-12-06 6:03 ` Vasanthakumar Thiagarajan
2010-12-06 10:42 ` Felix Fietkau
2010-12-06 11:44 ` Vasanthakumar Thiagarajan
2010-12-06 11:50 ` Felix Fietkau
2010-12-06 11:54 ` Vasanthakumar Thiagarajan
2010-12-06 11:51 ` Johannes Berg
2010-12-02 11:06 ` [PATCH V2 13/27] ath9k_hw: Add a helper function to get spur channel pointer from cal data for AR9003 family Vasanthakumar Thiagarajan
2010-12-02 11:06 ` [PATCH V2 14/27] ath9k_hw: Read spur channel information from eeprom for AR9485 Vasanthakumar Thiagarajan
2010-12-02 11:06 ` [PATCH V2 15/27] ath9k_hw: Configure xpa bias level " Vasanthakumar Thiagarajan
2010-12-02 11:07 ` [PATCH V2 16/27] ath9k_hw: Read and configure antenna diversity control " Vasanthakumar Thiagarajan
2010-12-02 11:22 ` Julian Calaby
2010-12-02 12:09 ` Vasanthakumar Thiagarajan
2010-12-02 12:16 ` Julian Calaby
2010-12-02 12:21 ` Vasanthakumar Thiagarajan
2010-12-02 12:29 ` Julian Calaby
2010-12-02 11:07 ` [PATCH V2 17/27] ath9k_hw: Configure attenuation control only for supported chains Vasanthakumar Thiagarajan
2010-12-02 11:07 ` [PATCH V2 18/27] ath9k_hw: Configure internal regulator for AR9485 Vasanthakumar Thiagarajan
2010-12-02 11:07 ` Vasanthakumar Thiagarajan [this message]
2010-12-02 11:07 ` [PATCH V2 20/27] ath9k_hw: Configure power control only for the supported chains Vasanthakumar Thiagarajan
2010-12-02 11:07 ` [PATCH V2 21/27] ath9k_hw: Program appropriate chianmask for AR9485 before starting AGC/IQ cal Vasanthakumar Thiagarajan
2010-12-02 11:07 ` [PATCH V2 22/27] ath9k_hw: Define IQcal correction coefficient registers using index Vasanthakumar Thiagarajan
2010-12-02 11:07 ` [PATCH V2 23/27] ath9k_hw: Add IQ cal changes for AR9485 Vasanthakumar Thiagarajan
2010-12-02 11:07 ` [PATCH V2 24/27] ath9k_hw: Program appropriate register for temperature compensation cal " Vasanthakumar Thiagarajan
2010-12-02 11:07 ` [PATCH V2 25/27] ath9k_hw: Setup paprd only for supported chains Vasanthakumar Thiagarajan
2010-12-02 11:07 ` [PATCH V2 26/27] ath9k_hw: Disable MRC CCK for AR9485 Vasanthakumar Thiagarajan
2010-12-02 11:07 ` [PATCH V2 27/27] ath9k: Add device id of AR9485 to pci table Vasanthakumar Thiagarajan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1291288031-3409-20-git-send-email-vasanth@atheros.com \
--to=vasanth@atheros.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).