From: Vasanthakumar Thiagarajan <vasanth@atheros.com>
To: <linville@tuxdriver.com>
Cc: <linux-wireless@vger.kernel.org>
Subject: [PATCH V3 24/27] ath9k_hw: Program appropriate register for temperature compensation cal for AR9485
Date: Mon, 6 Dec 2010 04:27:57 -0800 [thread overview]
Message-ID: <1291638480-8950-25-git-send-email-vasanth@atheros.com> (raw)
In-Reply-To: <1291638480-8950-1-git-send-email-vasanth@atheros.com>
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
---
drivers/net/wireless/ath/ath9k/ar9003_phy.h | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.h b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
index 74e0da9..00cd3e5 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
@@ -586,7 +586,7 @@
#define AR_PHY_65NM_CH0_BIAS2 0x160c4
#define AR_PHY_65NM_CH0_BIAS4 0x160cc
#define AR_PHY_65NM_CH0_RXTX4 0x1610c
-#define AR_PHY_65NM_CH0_THERM 0x16290
+#define AR_PHY_65NM_CH0_THERM (AR_SREV_9485(ah) ? 0x1628c : 0x16290)
#define AR_PHY_65NM_CH0_THERM_LOCAL 0x80000000
#define AR_PHY_65NM_CH0_THERM_LOCAL_S 31
--
1.7.0.4
next prev parent reply other threads:[~2010-12-06 12:32 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-06 12:27 [PATCH V3 00/27] Add support for AR9485 Vasanthakumar Thiagarajan
2010-12-06 12:27 ` [PATCH V3 01/27] ath9k_hw: Define hw version macros " Vasanthakumar Thiagarajan
2010-12-06 12:27 ` [PATCH V3 02/27] ath9k_hw: Add initvals.h " Vasanthakumar Thiagarajan
2010-12-06 12:27 ` [PATCH V3 03/27] ath9k_hw: Enable hw initialization " Vasanthakumar Thiagarajan
2010-12-06 12:27 ` [PATCH V3 04/27] ath9k_hw: Initialize mode registers " Vasanthakumar Thiagarajan
2010-12-06 12:27 ` [PATCH V3 05/27] ath9k_hw: Initialize tx/rx gain table from initvals.h " Vasanthakumar Thiagarajan
2010-12-06 12:27 ` [PATCH V3 06/27] ath9k_hw: Eeeprom changes " Vasanthakumar Thiagarajan
2010-12-06 12:27 ` [PATCH V3 07/27] ath9k_hw: Disable LDPC " Vasanthakumar Thiagarajan
2010-12-06 12:27 ` [PATCH V3 08/27] ath9k: Disable TX STBC " Vasanthakumar Thiagarajan
2010-12-06 12:27 ` [PATCH V3 09/27] ath9k: Enable extended synch for AR9485 to fix L0s recovery issue Vasanthakumar Thiagarajan
2010-12-06 12:27 ` [PATCH V3 10/27] ath9k_hw: Find the maximum number of chains that hw supports Vasanthakumar Thiagarajan
2010-12-06 12:27 ` [PATCH V3 11/27] ath9k: Configure pll control for AR9485 Vasanthakumar Thiagarajan
2010-12-06 12:27 ` [PATCH V3 12/27] ath9k_hw: Find chansel of AR_PHY_65NM_CH0_SYNTH7 " Vasanthakumar Thiagarajan
2010-12-06 12:27 ` [PATCH V3 13/27] ath9k_hw: Add a helper function to get spur channel pointer from cal data for AR9003 family Vasanthakumar Thiagarajan
2010-12-06 12:27 ` [PATCH V3 14/27] ath9k: Read spur channel information from eeprom for AR9485 Vasanthakumar Thiagarajan
2010-12-06 12:27 ` [PATCH V3 15/27] ath9k_hw: Configure xpa bias level " Vasanthakumar Thiagarajan
2010-12-06 12:27 ` [PATCH V3 16/27] ath9k_hw: Read and configure antenna diversity control " Vasanthakumar Thiagarajan
2010-12-06 12:27 ` [PATCH V3 17/27] ath9k_hw: Configure attenuation control only for supported chains Vasanthakumar Thiagarajan
2010-12-06 12:27 ` [PATCH V3 18/27] ath9k_hw: Configure internal regulator for AR9485 Vasanthakumar Thiagarajan
2010-12-06 12:27 ` [PATCH V3 19/27] ath9k_hw: Read and configure turnning caps to regulate freq accuracy Vasanthakumar Thiagarajan
2010-12-06 12:27 ` [PATCH V3 20/27] ath9k_hw: Configure power control only for the supported chains Vasanthakumar Thiagarajan
2010-12-06 12:27 ` [PATCH V3 21/27] ath9k_hw: Program appropriate chianmask for AR9485 before starting AGC/IQ cal Vasanthakumar Thiagarajan
2010-12-06 12:27 ` [PATCH V3 22/27] ath9k_hw: Define IQcal correction coefficient registers using index Vasanthakumar Thiagarajan
2010-12-06 12:27 ` [PATCH V3 23/27] ath9k_hw: Add IQ cal changes for AR9485 Vasanthakumar Thiagarajan
2010-12-06 12:27 ` Vasanthakumar Thiagarajan [this message]
2010-12-06 12:27 ` [PATCH V3 25/27] ath9k_hw: Setup paprd only for supported chains Vasanthakumar Thiagarajan
2010-12-06 12:27 ` [PATCH V3 26/27] ath9k_hw: Disable MRC CCK for AR9485 Vasanthakumar Thiagarajan
2010-12-06 12:28 ` [PATCH V3 27/27] ath9k: Add device id of AR9485 to pci table Vasanthakumar Thiagarajan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1291638480-8950-25-git-send-email-vasanth@atheros.com \
--to=vasanth@atheros.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).