From: David Kilroy <kilroyd@googlemail.com>
To: linux-wireless@vger.kernel.org
Cc: Matt_Domsch@dell.com, David Kilroy <kilroyd@googlemail.com>
Subject: [PATCH] orinoco: initialise priv->hw before assigning the interrupt
Date: Tue, 7 Dec 2010 18:50:42 +0000 [thread overview]
Message-ID: <1291747842-5634-1-git-send-email-kilroyd@googlemail.com> (raw)
The interrupt handler takes a lock - but since commit bcad6e80f3f this
lock goes through an indirection specified in the hermes_t structure.
We must therefore initialise the structure before setting up the
interrupt handler.
Fix orinoco_cs and spectrum_cs
<https://bugzilla.kernel.org/show_bug.cgi?id=23932>
Bisected by: Matt Domsch <Matt_Domsch@dell.com>
Signed-off by: David Kilroy <kilroyd@googlemail.com>
---
This patch is based on wireless-testing.
Matt has tested the equivalent fix based on v2.6.35. There have been
other changes in this area due to pcmcia refactorring.
John, let me know if you'd like a separate version targetted at v2.6.37.
---
drivers/net/wireless/orinoco/orinoco_cs.c | 14 +++++++-------
drivers/net/wireless/orinoco/spectrum_cs.c | 14 +++++++-------
2 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c
index 71b3d68..32954c4 100644
--- a/drivers/net/wireless/orinoco/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco/orinoco_cs.c
@@ -151,20 +151,20 @@ orinoco_cs_config(struct pcmcia_device *link)
goto failed;
}
- ret = pcmcia_request_irq(link, orinoco_interrupt);
- if (ret)
- goto failed;
-
- /* We initialize the hermes structure before completing PCMCIA
- * configuration just in case the interrupt handler gets
- * called. */
mem = ioport_map(link->resource[0]->start,
resource_size(link->resource[0]));
if (!mem)
goto failed;
+ /* We initialize the hermes structure before completing PCMCIA
+ * configuration just in case the interrupt handler gets
+ * called. */
hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING);
+ ret = pcmcia_request_irq(link, orinoco_interrupt);
+ if (ret)
+ goto failed;
+
ret = pcmcia_enable_device(link);
if (ret)
goto failed;
diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c
index fb859a5..db34c28 100644
--- a/drivers/net/wireless/orinoco/spectrum_cs.c
+++ b/drivers/net/wireless/orinoco/spectrum_cs.c
@@ -214,21 +214,21 @@ spectrum_cs_config(struct pcmcia_device *link)
goto failed;
}
- ret = pcmcia_request_irq(link, orinoco_interrupt);
- if (ret)
- goto failed;
-
- /* We initialize the hermes structure before completing PCMCIA
- * configuration just in case the interrupt handler gets
- * called. */
mem = ioport_map(link->resource[0]->start,
resource_size(link->resource[0]));
if (!mem)
goto failed;
+ /* We initialize the hermes structure before completing PCMCIA
+ * configuration just in case the interrupt handler gets
+ * called. */
hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING);
hw->eeprom_pda = true;
+ ret = pcmcia_request_irq(link, orinoco_interrupt);
+ if (ret)
+ goto failed;
+
ret = pcmcia_enable_device(link);
if (ret)
goto failed;
--
1.7.2.2
reply other threads:[~2010-12-07 18:51 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1291747842-5634-1-git-send-email-kilroyd@googlemail.com \
--to=kilroyd@googlemail.com \
--cc=Matt_Domsch@dell.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox