* [PATCH 4/4] iwlwifi: split the drivers for agn and legacy devices 3945/4965
2011-02-21 19:06 [PATCH 0/4] update for 2.6.39 Wey-Yi Guy
` (2 preceding siblings ...)
2011-02-21 19:06 ` [PATCH 3/4] iwlwifi: enable 2-wire bt coex support for non-combo device Wey-Yi Guy
@ 2011-02-21 19:06 ` Wey-Yi Guy
2011-04-23 11:35 ` Maxim Levitsky
2011-02-21 19:09 ` [PATCH 0/4] update for 2.6.39 Guy, Wey-Yi
4 siblings, 1 reply; 14+ messages in thread
From: Wey-Yi Guy @ 2011-02-21 19:06 UTC (permalink / raw)
To: linville
Cc: linux-wireless, ipw3945-devel, Meenakshi Venkataraman, Wey-Yi Guy
From: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com>
Intel WiFi devices 3945 and 4965 now have their own driver in the folder
drivers/net/wireless/iwlegacy
Add support to build these drivers independently of the driver for
AGN devices. Selecting the 3945 builds iwl3945.ko and iwl_legacy.ko,
and selecting the 4965 builds iwl4965.ko and iwl_legacy.ko. iwl-legacy.ko
contains code shared between both devices.
The 3945 is an ABG/BG device, with no support for 802.11n. The 4965 is a 2x3
ABGN device.
Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com>
Acked-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
---
drivers/net/wireless/Kconfig | 1 +
drivers/net/wireless/Makefile | 3 +-
drivers/net/wireless/iwlwifi/Kconfig | 124 +-
drivers/net/wireless/iwlwifi/Makefile | 39 +-
drivers/net/wireless/iwlwifi/iwl-3945-debugfs.c | 522 ---
drivers/net/wireless/iwlwifi/iwl-3945-debugfs.h | 60 -
drivers/net/wireless/iwlwifi/iwl-3945-fh.h | 188 -
drivers/net/wireless/iwlwifi/iwl-3945-hw.h | 294 --
drivers/net/wireless/iwlwifi/iwl-3945-led.c | 64 -
drivers/net/wireless/iwlwifi/iwl-3945-led.h | 32 -
drivers/net/wireless/iwlwifi/iwl-3945-rs.c | 995 ------
drivers/net/wireless/iwlwifi/iwl-3945.c | 2819 ---------------
drivers/net/wireless/iwlwifi/iwl-3945.h | 308 --
drivers/net/wireless/iwlwifi/iwl-4965-hw.h | 792 -----
drivers/net/wireless/iwlwifi/iwl-4965.c | 2666 --------------
drivers/net/wireless/iwlwifi/iwl-agn.c | 18 -
drivers/net/wireless/iwlwifi/iwl-core.c | 54 -
drivers/net/wireless/iwlwifi/iwl-debugfs.c | 2 -
drivers/net/wireless/iwlwifi/iwl-dev.h | 4 +-
drivers/net/wireless/iwlwifi/iwl-eeprom.c | 8 -
drivers/net/wireless/iwlwifi/iwl-hcmd.c | 5 -
drivers/net/wireless/iwlwifi/iwl-led.c | 2 -
drivers/net/wireless/iwlwifi/iwl-legacy.c | 657 ----
drivers/net/wireless/iwlwifi/iwl-legacy.h | 79 -
drivers/net/wireless/iwlwifi/iwl-power.c | 3 -
drivers/net/wireless/iwlwifi/iwl-rx.c | 6 -
drivers/net/wireless/iwlwifi/iwl-scan.c | 10 -
drivers/net/wireless/iwlwifi/iwl-sta.c | 11 -
drivers/net/wireless/iwlwifi/iwl-tx.c | 7 -
drivers/net/wireless/iwlwifi/iwl3945-base.c | 4334 -----------------------
30 files changed, 61 insertions(+), 14046 deletions(-)
delete mode 100644 drivers/net/wireless/iwlwifi/iwl-3945-debugfs.c
delete mode 100644 drivers/net/wireless/iwlwifi/iwl-3945-debugfs.h
delete mode 100644 drivers/net/wireless/iwlwifi/iwl-3945-fh.h
delete mode 100644 drivers/net/wireless/iwlwifi/iwl-3945-hw.h
delete mode 100644 drivers/net/wireless/iwlwifi/iwl-3945-led.c
delete mode 100644 drivers/net/wireless/iwlwifi/iwl-3945-led.h
delete mode 100644 drivers/net/wireless/iwlwifi/iwl-3945-rs.c
delete mode 100644 drivers/net/wireless/iwlwifi/iwl-3945.c
delete mode 100644 drivers/net/wireless/iwlwifi/iwl-3945.h
delete mode 100644 drivers/net/wireless/iwlwifi/iwl-4965-hw.h
delete mode 100644 drivers/net/wireless/iwlwifi/iwl-4965.c
delete mode 100644 drivers/net/wireless/iwlwifi/iwl-legacy.c
delete mode 100644 drivers/net/wireless/iwlwifi/iwl-legacy.h
delete mode 100644 drivers/net/wireless/iwlwifi/iwl3945-base.c
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index b4338f3..7aeb113 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -274,6 +274,7 @@ source "drivers/net/wireless/b43legacy/Kconfig"
source "drivers/net/wireless/hostap/Kconfig"
source "drivers/net/wireless/ipw2x00/Kconfig"
source "drivers/net/wireless/iwlwifi/Kconfig"
+source "drivers/net/wireless/iwlegacy/Kconfig"
source "drivers/net/wireless/iwmc3200wifi/Kconfig"
source "drivers/net/wireless/libertas/Kconfig"
source "drivers/net/wireless/orinoco/Kconfig"
diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile
index 9760561..cd0c7e2 100644
--- a/drivers/net/wireless/Makefile
+++ b/drivers/net/wireless/Makefile
@@ -41,7 +41,8 @@ obj-$(CONFIG_ADM8211) += adm8211.o
obj-$(CONFIG_MWL8K) += mwl8k.o
-obj-$(CONFIG_IWLWIFI) += iwlwifi/
+obj-$(CONFIG_IWLAGN) += iwlwifi/
+obj-$(CONFIG_IWLWIFI_LEGACY) += iwlegacy/
obj-$(CONFIG_RT2X00) += rt2x00/
obj-$(CONFIG_P54_COMMON) += p54/
diff --git a/drivers/net/wireless/iwlwifi/Kconfig b/drivers/net/wireless/iwlwifi/Kconfig
index e1e3b1c..17d555f 100644
--- a/drivers/net/wireless/iwlwifi/Kconfig
+++ b/drivers/net/wireless/iwlwifi/Kconfig
@@ -1,18 +1,52 @@
-config IWLWIFI
- tristate "Intel Wireless Wifi"
+config IWLAGN
+ tristate "Intel Wireless WiFi Next Gen AGN - Wireless-N/Advanced-N/Ultimate-N (iwlagn) "
depends on PCI && MAC80211
select FW_LOADER
select NEW_LEDS
select LEDS_CLASS
select LEDS_TRIGGERS
select MAC80211_LEDS
+ ---help---
+ Select to build the driver supporting the:
+
+ Intel Wireless WiFi Link Next-Gen AGN
+
+ This option enables support for use with the following hardware:
+ Intel Wireless WiFi Link 6250AGN Adapter
+ Intel 6000 Series Wi-Fi Adapters (6200AGN and 6300AGN)
+ Intel WiFi Link 1000BGN
+ Intel Wireless WiFi 5150AGN
+ Intel Wireless WiFi 5100AGN, 5300AGN, and 5350AGN
+ Intel 6005 Series Wi-Fi Adapters
+ Intel 6030 Series Wi-Fi Adapters
+ Intel Wireless WiFi Link 6150BGN 2 Adapter
+ Intel 100 Series Wi-Fi Adapters (100BGN and 130BGN)
+ Intel 2000 Series Wi-Fi Adapters
+
+
+ This driver uses the kernel's mac80211 subsystem.
+
+ In order to use this driver, you will need a microcode (uCode)
+ image for it. You can obtain the microcode from:
+
+ <http://intellinuxwireless.org/>.
+
+ The microcode is typically installed in /lib/firmware. You can
+ look in the hotplug script /etc/hotplug/firmware.agent to
+ determine which directory FIRMWARE_DIR is set to when the script
+ runs.
+
+ If you want to compile the driver as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want),
+ say M here and read <file:Documentation/kbuild/modules.txt>. The
+ module will be called iwlagn.
menu "Debugging Options"
- depends on IWLWIFI
+ depends on IWLAGN
config IWLWIFI_DEBUG
- bool "Enable full debugging output in iwlagn and iwl3945 drivers"
- depends on IWLWIFI
+ bool "Enable full debugging output in the iwlagn driver"
+ depends on IWLAGN
---help---
This option will enable debug tracing output for the iwlwifi drivers
@@ -37,7 +71,7 @@ config IWLWIFI_DEBUG
config IWLWIFI_DEBUGFS
bool "iwlagn debugfs support"
- depends on IWLWIFI && MAC80211_DEBUGFS
+ depends on IWLAGN && MAC80211_DEBUGFS
---help---
Enable creation of debugfs files for the iwlwifi drivers. This
is a low-impact option that allows getting insight into the
@@ -45,13 +79,13 @@ config IWLWIFI_DEBUGFS
config IWLWIFI_DEBUG_EXPERIMENTAL_UCODE
bool "Experimental uCode support"
- depends on IWLWIFI && IWLWIFI_DEBUG
+ depends on IWLAGN && IWLWIFI_DEBUG
---help---
Enable use of experimental ucode for testing and debugging.
config IWLWIFI_DEVICE_TRACING
bool "iwlwifi device access tracing"
- depends on IWLWIFI
+ depends on IWLAGN
depends on EVENT_TRACING
help
Say Y here to trace all commands, including TX frames and IO
@@ -68,57 +102,9 @@ config IWLWIFI_DEVICE_TRACING
occur.
endmenu
-config IWLAGN
- tristate "Intel Wireless WiFi Next Gen AGN (iwlagn)"
- depends on IWLWIFI
- ---help---
- Select to build the driver supporting the:
-
- Intel Wireless WiFi Link Next-Gen AGN
-
- This driver uses the kernel's mac80211 subsystem.
-
- In order to use this driver, you will need a microcode (uCode)
- image for it. You can obtain the microcode from:
-
- <http://intellinuxwireless.org/>.
-
- The microcode is typically installed in /lib/firmware. You can
- look in the hotplug script /etc/hotplug/firmware.agent to
- determine which directory FIRMWARE_DIR is set to when the script
- runs.
-
- If you want to compile the driver as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/kbuild/modules.txt>. The
- module will be called iwlagn.
-
-
-config IWL4965
- bool "Intel Wireless WiFi 4965AGN"
- depends on IWLAGN
- ---help---
- This option enables support for Intel Wireless WiFi Link 4965AGN
-
-config IWL5000
- bool "Intel Wireless-N/Advanced-N/Ultimate-N WiFi Link"
- depends on IWLAGN
- ---help---
- This option enables support for use with the following hardware:
- Intel Wireless WiFi Link 6250AGN Adapter
- Intel 6000 Series Wi-Fi Adapters (6200AGN and 6300AGN)
- Intel WiFi Link 1000BGN
- Intel Wireless WiFi 5150AGN
- Intel Wireless WiFi 5100AGN, 5300AGN, and 5350AGN
- Intel 6005 Series Wi-Fi Adapters
- Intel 6030 Series Wi-Fi Adapters
- Intel Wireless WiFi Link 6150BGN 2 Adapter
- Intel 100 Series Wi-Fi Adapters (100BGN and 130BGN)
- Intel 2000 Series Wi-Fi Adapters
-
config IWL_P2P
bool "iwlwifi experimental P2P support"
- depends on IWL5000
+ depends on IWLAGN
help
This option enables experimental P2P support for some devices
based on microcode support. Since P2P support is still under
@@ -132,27 +118,3 @@ config IWL_P2P
Say Y only if you want to experiment with P2P.
-config IWL3945
- tristate "Intel PRO/Wireless 3945ABG/BG Network Connection (iwl3945)"
- depends on IWLWIFI
- ---help---
- Select to build the driver supporting the:
-
- Intel PRO/Wireless 3945ABG/BG Network Connection
-
- This driver uses the kernel's mac80211 subsystem.
-
- In order to use this driver, you will need a microcode (uCode)
- image for it. You can obtain the microcode from:
-
- <http://intellinuxwireless.org/>.
-
- The microcode is typically installed in /lib/firmware. You can
- look in the hotplug script /etc/hotplug/firmware.agent to
- determine which directory FIRMWARE_DIR is set to when the script
- runs.
-
- If you want to compile the driver as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/kbuild/modules.txt>. The
- module will be called iwl3945.
diff --git a/drivers/net/wireless/iwlwifi/Makefile b/drivers/net/wireless/iwlwifi/Makefile
index 25be742..aab7d15 100644
--- a/drivers/net/wireless/iwlwifi/Makefile
+++ b/drivers/net/wireless/iwlwifi/Makefile
@@ -1,36 +1,23 @@
-obj-$(CONFIG_IWLWIFI) += iwlcore.o
-iwlcore-objs := iwl-core.o iwl-eeprom.o iwl-hcmd.o iwl-power.o
-iwlcore-objs += iwl-rx.o iwl-tx.o iwl-sta.o
-iwlcore-objs += iwl-scan.o iwl-led.o
-iwlcore-$(CONFIG_IWL3945) += iwl-legacy.o
-iwlcore-$(CONFIG_IWL4965) += iwl-legacy.o
-iwlcore-$(CONFIG_IWLWIFI_DEBUGFS) += iwl-debugfs.o
-iwlcore-$(CONFIG_IWLWIFI_DEVICE_TRACING) += iwl-devtrace.o
-
-# If 3945 is selected only, iwl-legacy.o will be added
-# to iwlcore-m above, but it needs to be built in.
-iwlcore-objs += $(iwlcore-m)
-
-CFLAGS_iwl-devtrace.o := -I$(src)
-
# AGN
obj-$(CONFIG_IWLAGN) += iwlagn.o
iwlagn-objs := iwl-agn.o iwl-agn-rs.o iwl-agn-led.o
iwlagn-objs += iwl-agn-ucode.o iwl-agn-tx.o
iwlagn-objs += iwl-agn-lib.o iwl-agn-rx.o iwl-agn-calib.o
iwlagn-objs += iwl-agn-tt.o iwl-agn-sta.o iwl-agn-eeprom.o
-iwlagn-$(CONFIG_IWLWIFI_DEBUGFS) += iwl-agn-debugfs.o
-iwlagn-$(CONFIG_IWL4965) += iwl-4965.o
-iwlagn-$(CONFIG_IWL5000) += iwl-agn-rxon.o iwl-agn-hcmd.o iwl-agn-ict.o
-iwlagn-$(CONFIG_IWL5000) += iwl-5000.o
-iwlagn-$(CONFIG_IWL5000) += iwl-6000.o
-iwlagn-$(CONFIG_IWL5000) += iwl-1000.o
-iwlagn-$(CONFIG_IWL5000) += iwl-2000.o
+iwlagn-objs += iwl-core.o iwl-eeprom.o iwl-hcmd.o iwl-power.o
+iwlagn-objs += iwl-rx.o iwl-tx.o iwl-sta.o
+iwlagn-objs += iwl-scan.o iwl-led.o
+iwlagn-objs += iwl-agn-rxon.o iwl-agn-hcmd.o iwl-agn-ict.o
+iwlagn-objs += iwl-5000.o
+iwlagn-objs += iwl-6000.o
+iwlagn-objs += iwl-1000.o
+iwlagn-objs += iwl-2000.o
+
+iwlagn-$(CONFIG_IWLWIFI_DEBUGFS) += iwl-agn-debugfs.o
+iwlagn-$(CONFIG_IWLWIFI_DEBUGFS) += iwl-debugfs.o
+iwlagn-$(CONFIG_IWLWIFI_DEVICE_TRACING) += iwl-devtrace.o
-# 3945
-obj-$(CONFIG_IWL3945) += iwl3945.o
-iwl3945-objs := iwl3945-base.o iwl-3945.o iwl-3945-rs.o iwl-3945-led.o
-iwl3945-$(CONFIG_IWLWIFI_DEBUGFS) += iwl-3945-debugfs.o
+CFLAGS_iwl-devtrace.o := -I$(src)
ccflags-y += -D__CHECK_ENDIAN__
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-3945-debugfs.c
deleted file mode 100644
index ef0835b..0000000
--- a/drivers/net/wireless/iwlwifi/iwl-3945-debugfs.c
+++ /dev/null
@@ -1,522 +0,0 @@
-/******************************************************************************
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
- * USA
- *
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * Contact Information:
- * Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *****************************************************************************/
-
-#include "iwl-3945-debugfs.h"
-
-
-static int iwl3945_statistics_flag(struct iwl_priv *priv, char *buf, int bufsz)
-{
- int p = 0;
-
- p += scnprintf(buf + p, bufsz - p, "Statistics Flag(0x%X):\n",
- le32_to_cpu(priv->_3945.statistics.flag));
- if (le32_to_cpu(priv->_3945.statistics.flag) &
- UCODE_STATISTICS_CLEAR_MSK)
- p += scnprintf(buf + p, bufsz - p,
- "\tStatistics have been cleared\n");
- p += scnprintf(buf + p, bufsz - p, "\tOperational Frequency: %s\n",
- (le32_to_cpu(priv->_3945.statistics.flag) &
- UCODE_STATISTICS_FREQUENCY_MSK)
- ? "2.4 GHz" : "5.2 GHz");
- p += scnprintf(buf + p, bufsz - p, "\tTGj Narrow Band: %s\n",
- (le32_to_cpu(priv->_3945.statistics.flag) &
- UCODE_STATISTICS_NARROW_BAND_MSK)
- ? "enabled" : "disabled");
- return p;
-}
-
-ssize_t iwl3945_ucode_rx_stats_read(struct file *file,
- char __user *user_buf,
- size_t count, loff_t *ppos)
-{
- struct iwl_priv *priv = file->private_data;
- int pos = 0;
- char *buf;
- int bufsz = sizeof(struct iwl39_statistics_rx_phy) * 40 +
- sizeof(struct iwl39_statistics_rx_non_phy) * 40 + 400;
- ssize_t ret;
- struct iwl39_statistics_rx_phy *ofdm, *accum_ofdm, *delta_ofdm, *max_ofdm;
- struct iwl39_statistics_rx_phy *cck, *accum_cck, *delta_cck, *max_cck;
- struct iwl39_statistics_rx_non_phy *general, *accum_general;
- struct iwl39_statistics_rx_non_phy *delta_general, *max_general;
-
- if (!iwl_is_alive(priv))
- return -EAGAIN;
-
- buf = kzalloc(bufsz, GFP_KERNEL);
- if (!buf) {
- IWL_ERR(priv, "Can not allocate Buffer\n");
- return -ENOMEM;
- }
-
- /*
- * The statistic information display here is based on
- * the last statistics notification from uCode
- * might not reflect the current uCode activity
- */
- ofdm = &priv->_3945.statistics.rx.ofdm;
- cck = &priv->_3945.statistics.rx.cck;
- general = &priv->_3945.statistics.rx.general;
- accum_ofdm = &priv->_3945.accum_statistics.rx.ofdm;
- accum_cck = &priv->_3945.accum_statistics.rx.cck;
- accum_general = &priv->_3945.accum_statistics.rx.general;
- delta_ofdm = &priv->_3945.delta_statistics.rx.ofdm;
- delta_cck = &priv->_3945.delta_statistics.rx.cck;
- delta_general = &priv->_3945.delta_statistics.rx.general;
- max_ofdm = &priv->_3945.max_delta.rx.ofdm;
- max_cck = &priv->_3945.max_delta.rx.cck;
- max_general = &priv->_3945.max_delta.rx.general;
-
- pos += iwl3945_statistics_flag(priv, buf, bufsz);
- pos += scnprintf(buf + pos, bufsz - pos, "%-32s current"
- "acumulative delta max\n",
- "Statistics_Rx - OFDM:");
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "ina_cnt:", le32_to_cpu(ofdm->ina_cnt),
- accum_ofdm->ina_cnt,
- delta_ofdm->ina_cnt, max_ofdm->ina_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "fina_cnt:",
- le32_to_cpu(ofdm->fina_cnt), accum_ofdm->fina_cnt,
- delta_ofdm->fina_cnt, max_ofdm->fina_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n", "plcp_err:",
- le32_to_cpu(ofdm->plcp_err), accum_ofdm->plcp_err,
- delta_ofdm->plcp_err, max_ofdm->plcp_err);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n", "crc32_err:",
- le32_to_cpu(ofdm->crc32_err), accum_ofdm->crc32_err,
- delta_ofdm->crc32_err, max_ofdm->crc32_err);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n", "overrun_err:",
- le32_to_cpu(ofdm->overrun_err),
- accum_ofdm->overrun_err, delta_ofdm->overrun_err,
- max_ofdm->overrun_err);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "early_overrun_err:",
- le32_to_cpu(ofdm->early_overrun_err),
- accum_ofdm->early_overrun_err,
- delta_ofdm->early_overrun_err,
- max_ofdm->early_overrun_err);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "crc32_good:", le32_to_cpu(ofdm->crc32_good),
- accum_ofdm->crc32_good, delta_ofdm->crc32_good,
- max_ofdm->crc32_good);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n", "false_alarm_cnt:",
- le32_to_cpu(ofdm->false_alarm_cnt),
- accum_ofdm->false_alarm_cnt,
- delta_ofdm->false_alarm_cnt,
- max_ofdm->false_alarm_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "fina_sync_err_cnt:",
- le32_to_cpu(ofdm->fina_sync_err_cnt),
- accum_ofdm->fina_sync_err_cnt,
- delta_ofdm->fina_sync_err_cnt,
- max_ofdm->fina_sync_err_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "sfd_timeout:",
- le32_to_cpu(ofdm->sfd_timeout),
- accum_ofdm->sfd_timeout,
- delta_ofdm->sfd_timeout,
- max_ofdm->sfd_timeout);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "fina_timeout:",
- le32_to_cpu(ofdm->fina_timeout),
- accum_ofdm->fina_timeout,
- delta_ofdm->fina_timeout,
- max_ofdm->fina_timeout);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "unresponded_rts:",
- le32_to_cpu(ofdm->unresponded_rts),
- accum_ofdm->unresponded_rts,
- delta_ofdm->unresponded_rts,
- max_ofdm->unresponded_rts);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "rxe_frame_lmt_ovrun:",
- le32_to_cpu(ofdm->rxe_frame_limit_overrun),
- accum_ofdm->rxe_frame_limit_overrun,
- delta_ofdm->rxe_frame_limit_overrun,
- max_ofdm->rxe_frame_limit_overrun);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "sent_ack_cnt:",
- le32_to_cpu(ofdm->sent_ack_cnt),
- accum_ofdm->sent_ack_cnt,
- delta_ofdm->sent_ack_cnt,
- max_ofdm->sent_ack_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "sent_cts_cnt:",
- le32_to_cpu(ofdm->sent_cts_cnt),
- accum_ofdm->sent_cts_cnt,
- delta_ofdm->sent_cts_cnt, max_ofdm->sent_cts_cnt);
-
- pos += scnprintf(buf + pos, bufsz - pos, "%-32s current"
- "acumulative delta max\n",
- "Statistics_Rx - CCK:");
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "ina_cnt:",
- le32_to_cpu(cck->ina_cnt), accum_cck->ina_cnt,
- delta_cck->ina_cnt, max_cck->ina_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "fina_cnt:",
- le32_to_cpu(cck->fina_cnt), accum_cck->fina_cnt,
- delta_cck->fina_cnt, max_cck->fina_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "plcp_err:",
- le32_to_cpu(cck->plcp_err), accum_cck->plcp_err,
- delta_cck->plcp_err, max_cck->plcp_err);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "crc32_err:",
- le32_to_cpu(cck->crc32_err), accum_cck->crc32_err,
- delta_cck->crc32_err, max_cck->crc32_err);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "overrun_err:",
- le32_to_cpu(cck->overrun_err),
- accum_cck->overrun_err,
- delta_cck->overrun_err, max_cck->overrun_err);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "early_overrun_err:",
- le32_to_cpu(cck->early_overrun_err),
- accum_cck->early_overrun_err,
- delta_cck->early_overrun_err,
- max_cck->early_overrun_err);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "crc32_good:",
- le32_to_cpu(cck->crc32_good), accum_cck->crc32_good,
- delta_cck->crc32_good,
- max_cck->crc32_good);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "false_alarm_cnt:",
- le32_to_cpu(cck->false_alarm_cnt),
- accum_cck->false_alarm_cnt,
- delta_cck->false_alarm_cnt, max_cck->false_alarm_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "fina_sync_err_cnt:",
- le32_to_cpu(cck->fina_sync_err_cnt),
- accum_cck->fina_sync_err_cnt,
- delta_cck->fina_sync_err_cnt,
- max_cck->fina_sync_err_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "sfd_timeout:",
- le32_to_cpu(cck->sfd_timeout),
- accum_cck->sfd_timeout,
- delta_cck->sfd_timeout, max_cck->sfd_timeout);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "fina_timeout:",
- le32_to_cpu(cck->fina_timeout),
- accum_cck->fina_timeout,
- delta_cck->fina_timeout, max_cck->fina_timeout);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "unresponded_rts:",
- le32_to_cpu(cck->unresponded_rts),
- accum_cck->unresponded_rts,
- delta_cck->unresponded_rts,
- max_cck->unresponded_rts);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "rxe_frame_lmt_ovrun:",
- le32_to_cpu(cck->rxe_frame_limit_overrun),
- accum_cck->rxe_frame_limit_overrun,
- delta_cck->rxe_frame_limit_overrun,
- max_cck->rxe_frame_limit_overrun);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "sent_ack_cnt:",
- le32_to_cpu(cck->sent_ack_cnt),
- accum_cck->sent_ack_cnt,
- delta_cck->sent_ack_cnt,
- max_cck->sent_ack_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "sent_cts_cnt:",
- le32_to_cpu(cck->sent_cts_cnt),
- accum_cck->sent_cts_cnt,
- delta_cck->sent_cts_cnt,
- max_cck->sent_cts_cnt);
-
- pos += scnprintf(buf + pos, bufsz - pos, "%-32s current"
- "acumulative delta max\n",
- "Statistics_Rx - GENERAL:");
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "bogus_cts:",
- le32_to_cpu(general->bogus_cts),
- accum_general->bogus_cts,
- delta_general->bogus_cts, max_general->bogus_cts);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "bogus_ack:",
- le32_to_cpu(general->bogus_ack),
- accum_general->bogus_ack,
- delta_general->bogus_ack, max_general->bogus_ack);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "non_bssid_frames:",
- le32_to_cpu(general->non_bssid_frames),
- accum_general->non_bssid_frames,
- delta_general->non_bssid_frames,
- max_general->non_bssid_frames);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "filtered_frames:",
- le32_to_cpu(general->filtered_frames),
- accum_general->filtered_frames,
- delta_general->filtered_frames,
- max_general->filtered_frames);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "non_channel_beacons:",
- le32_to_cpu(general->non_channel_beacons),
- accum_general->non_channel_beacons,
- delta_general->non_channel_beacons,
- max_general->non_channel_beacons);
-
- ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
- kfree(buf);
- return ret;
-}
-
-ssize_t iwl3945_ucode_tx_stats_read(struct file *file,
- char __user *user_buf,
- size_t count, loff_t *ppos)
-{
- struct iwl_priv *priv = file->private_data;
- int pos = 0;
- char *buf;
- int bufsz = (sizeof(struct iwl39_statistics_tx) * 48) + 250;
- ssize_t ret;
- struct iwl39_statistics_tx *tx, *accum_tx, *delta_tx, *max_tx;
-
- if (!iwl_is_alive(priv))
- return -EAGAIN;
-
- buf = kzalloc(bufsz, GFP_KERNEL);
- if (!buf) {
- IWL_ERR(priv, "Can not allocate Buffer\n");
- return -ENOMEM;
- }
-
- /*
- * The statistic information display here is based on
- * the last statistics notification from uCode
- * might not reflect the current uCode activity
- */
- tx = &priv->_3945.statistics.tx;
- accum_tx = &priv->_3945.accum_statistics.tx;
- delta_tx = &priv->_3945.delta_statistics.tx;
- max_tx = &priv->_3945.max_delta.tx;
- pos += iwl3945_statistics_flag(priv, buf, bufsz);
- pos += scnprintf(buf + pos, bufsz - pos, "%-32s current"
- "acumulative delta max\n",
- "Statistics_Tx:");
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "preamble:",
- le32_to_cpu(tx->preamble_cnt),
- accum_tx->preamble_cnt,
- delta_tx->preamble_cnt, max_tx->preamble_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "rx_detected_cnt:",
- le32_to_cpu(tx->rx_detected_cnt),
- accum_tx->rx_detected_cnt,
- delta_tx->rx_detected_cnt, max_tx->rx_detected_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "bt_prio_defer_cnt:",
- le32_to_cpu(tx->bt_prio_defer_cnt),
- accum_tx->bt_prio_defer_cnt,
- delta_tx->bt_prio_defer_cnt,
- max_tx->bt_prio_defer_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "bt_prio_kill_cnt:",
- le32_to_cpu(tx->bt_prio_kill_cnt),
- accum_tx->bt_prio_kill_cnt,
- delta_tx->bt_prio_kill_cnt,
- max_tx->bt_prio_kill_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "few_bytes_cnt:",
- le32_to_cpu(tx->few_bytes_cnt),
- accum_tx->few_bytes_cnt,
- delta_tx->few_bytes_cnt, max_tx->few_bytes_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "cts_timeout:",
- le32_to_cpu(tx->cts_timeout), accum_tx->cts_timeout,
- delta_tx->cts_timeout, max_tx->cts_timeout);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "ack_timeout:",
- le32_to_cpu(tx->ack_timeout),
- accum_tx->ack_timeout,
- delta_tx->ack_timeout, max_tx->ack_timeout);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "expected_ack_cnt:",
- le32_to_cpu(tx->expected_ack_cnt),
- accum_tx->expected_ack_cnt,
- delta_tx->expected_ack_cnt,
- max_tx->expected_ack_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "actual_ack_cnt:",
- le32_to_cpu(tx->actual_ack_cnt),
- accum_tx->actual_ack_cnt,
- delta_tx->actual_ack_cnt,
- max_tx->actual_ack_cnt);
-
- ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
- kfree(buf);
- return ret;
-}
-
-ssize_t iwl3945_ucode_general_stats_read(struct file *file,
- char __user *user_buf,
- size_t count, loff_t *ppos)
-{
- struct iwl_priv *priv = file->private_data;
- int pos = 0;
- char *buf;
- int bufsz = sizeof(struct iwl39_statistics_general) * 10 + 300;
- ssize_t ret;
- struct iwl39_statistics_general *general, *accum_general;
- struct iwl39_statistics_general *delta_general, *max_general;
- struct statistics_dbg *dbg, *accum_dbg, *delta_dbg, *max_dbg;
- struct iwl39_statistics_div *div, *accum_div, *delta_div, *max_div;
-
- if (!iwl_is_alive(priv))
- return -EAGAIN;
-
- buf = kzalloc(bufsz, GFP_KERNEL);
- if (!buf) {
- IWL_ERR(priv, "Can not allocate Buffer\n");
- return -ENOMEM;
- }
-
- /*
- * The statistic information display here is based on
- * the last statistics notification from uCode
- * might not reflect the current uCode activity
- */
- general = &priv->_3945.statistics.general;
- dbg = &priv->_3945.statistics.general.dbg;
- div = &priv->_3945.statistics.general.div;
- accum_general = &priv->_3945.accum_statistics.general;
- delta_general = &priv->_3945.delta_statistics.general;
- max_general = &priv->_3945.max_delta.general;
- accum_dbg = &priv->_3945.accum_statistics.general.dbg;
- delta_dbg = &priv->_3945.delta_statistics.general.dbg;
- max_dbg = &priv->_3945.max_delta.general.dbg;
- accum_div = &priv->_3945.accum_statistics.general.div;
- delta_div = &priv->_3945.delta_statistics.general.div;
- max_div = &priv->_3945.max_delta.general.div;
- pos += iwl3945_statistics_flag(priv, buf, bufsz);
- pos += scnprintf(buf + pos, bufsz - pos, "%-32s current"
- "acumulative delta max\n",
- "Statistics_General:");
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "burst_check:",
- le32_to_cpu(dbg->burst_check),
- accum_dbg->burst_check,
- delta_dbg->burst_check, max_dbg->burst_check);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "burst_count:",
- le32_to_cpu(dbg->burst_count),
- accum_dbg->burst_count,
- delta_dbg->burst_count, max_dbg->burst_count);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "sleep_time:",
- le32_to_cpu(general->sleep_time),
- accum_general->sleep_time,
- delta_general->sleep_time, max_general->sleep_time);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "slots_out:",
- le32_to_cpu(general->slots_out),
- accum_general->slots_out,
- delta_general->slots_out, max_general->slots_out);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "slots_idle:",
- le32_to_cpu(general->slots_idle),
- accum_general->slots_idle,
- delta_general->slots_idle, max_general->slots_idle);
- pos += scnprintf(buf + pos, bufsz - pos, "ttl_timestamp:\t\t\t%u\n",
- le32_to_cpu(general->ttl_timestamp));
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "tx_on_a:",
- le32_to_cpu(div->tx_on_a), accum_div->tx_on_a,
- delta_div->tx_on_a, max_div->tx_on_a);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "tx_on_b:",
- le32_to_cpu(div->tx_on_b), accum_div->tx_on_b,
- delta_div->tx_on_b, max_div->tx_on_b);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "exec_time:",
- le32_to_cpu(div->exec_time), accum_div->exec_time,
- delta_div->exec_time, max_div->exec_time);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "probe_time:",
- le32_to_cpu(div->probe_time), accum_div->probe_time,
- delta_div->probe_time, max_div->probe_time);
- ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
- kfree(buf);
- return ret;
-}
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-debugfs.h b/drivers/net/wireless/iwlwifi/iwl-3945-debugfs.h
deleted file mode 100644
index 70809c5..0000000
--- a/drivers/net/wireless/iwlwifi/iwl-3945-debugfs.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/******************************************************************************
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
- * USA
- *
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * Contact Information:
- * Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *****************************************************************************/
-
-#include "iwl-dev.h"
-#include "iwl-core.h"
-#include "iwl-debug.h"
-
-#ifdef CONFIG_IWLWIFI_DEBUGFS
-ssize_t iwl3945_ucode_rx_stats_read(struct file *file, char __user *user_buf,
- size_t count, loff_t *ppos);
-ssize_t iwl3945_ucode_tx_stats_read(struct file *file, char __user *user_buf,
- size_t count, loff_t *ppos);
-ssize_t iwl3945_ucode_general_stats_read(struct file *file,
- char __user *user_buf, size_t count,
- loff_t *ppos);
-#else
-static ssize_t iwl3945_ucode_rx_stats_read(struct file *file,
- char __user *user_buf, size_t count,
- loff_t *ppos)
-{
- return 0;
-}
-static ssize_t iwl3945_ucode_tx_stats_read(struct file *file,
- char __user *user_buf, size_t count,
- loff_t *ppos)
-{
- return 0;
-}
-static ssize_t iwl3945_ucode_general_stats_read(struct file *file,
- char __user *user_buf,
- size_t count, loff_t *ppos)
-{
- return 0;
-}
-#endif
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-fh.h b/drivers/net/wireless/iwlwifi/iwl-3945-fh.h
deleted file mode 100644
index 2c9ed2b..0000000
--- a/drivers/net/wireless/iwlwifi/iwl-3945-fh.h
+++ /dev/null
@@ -1,188 +0,0 @@
-/******************************************************************************
- *
- * This file is provided under a dual BSD/GPLv2 license. When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
- * USA
- *
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * Contact Information:
- * Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- * BSD LICENSE
- *
- * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *****************************************************************************/
-#ifndef __iwl_3945_fh_h__
-#define __iwl_3945_fh_h__
-
-/************************************/
-/* iwl3945 Flow Handler Definitions */
-/************************************/
-
-/**
- * This I/O area is directly read/writable by driver (e.g. Linux uses writel())
- * Addresses are offsets from device's PCI hardware base address.
- */
-#define FH39_MEM_LOWER_BOUND (0x0800)
-#define FH39_MEM_UPPER_BOUND (0x1000)
-
-#define FH39_CBCC_TABLE (FH39_MEM_LOWER_BOUND + 0x140)
-#define FH39_TFDB_TABLE (FH39_MEM_LOWER_BOUND + 0x180)
-#define FH39_RCSR_TABLE (FH39_MEM_LOWER_BOUND + 0x400)
-#define FH39_RSSR_TABLE (FH39_MEM_LOWER_BOUND + 0x4c0)
-#define FH39_TCSR_TABLE (FH39_MEM_LOWER_BOUND + 0x500)
-#define FH39_TSSR_TABLE (FH39_MEM_LOWER_BOUND + 0x680)
-
-/* TFDB (Transmit Frame Buffer Descriptor) */
-#define FH39_TFDB(_ch, buf) (FH39_TFDB_TABLE + \
- ((_ch) * 2 + (buf)) * 0x28)
-#define FH39_TFDB_CHNL_BUF_CTRL_REG(_ch) (FH39_TFDB_TABLE + 0x50 * (_ch))
-
-/* CBCC channel is [0,2] */
-#define FH39_CBCC(_ch) (FH39_CBCC_TABLE + (_ch) * 0x8)
-#define FH39_CBCC_CTRL(_ch) (FH39_CBCC(_ch) + 0x00)
-#define FH39_CBCC_BASE(_ch) (FH39_CBCC(_ch) + 0x04)
-
-/* RCSR channel is [0,2] */
-#define FH39_RCSR(_ch) (FH39_RCSR_TABLE + (_ch) * 0x40)
-#define FH39_RCSR_CONFIG(_ch) (FH39_RCSR(_ch) + 0x00)
-#define FH39_RCSR_RBD_BASE(_ch) (FH39_RCSR(_ch) + 0x04)
-#define FH39_RCSR_WPTR(_ch) (FH39_RCSR(_ch) + 0x20)
-#define FH39_RCSR_RPTR_ADDR(_ch) (FH39_RCSR(_ch) + 0x24)
-
-#define FH39_RSCSR_CHNL0_WPTR (FH39_RCSR_WPTR(0))
-
-/* RSSR */
-#define FH39_RSSR_CTRL (FH39_RSSR_TABLE + 0x000)
-#define FH39_RSSR_STATUS (FH39_RSSR_TABLE + 0x004)
-
-/* TCSR */
-#define FH39_TCSR(_ch) (FH39_TCSR_TABLE + (_ch) * 0x20)
-#define FH39_TCSR_CONFIG(_ch) (FH39_TCSR(_ch) + 0x00)
-#define FH39_TCSR_CREDIT(_ch) (FH39_TCSR(_ch) + 0x04)
-#define FH39_TCSR_BUFF_STTS(_ch) (FH39_TCSR(_ch) + 0x08)
-
-/* TSSR */
-#define FH39_TSSR_CBB_BASE (FH39_TSSR_TABLE + 0x000)
-#define FH39_TSSR_MSG_CONFIG (FH39_TSSR_TABLE + 0x008)
-#define FH39_TSSR_TX_STATUS (FH39_TSSR_TABLE + 0x010)
-
-
-/* DBM */
-
-#define FH39_SRVC_CHNL (6)
-
-#define FH39_RCSR_RX_CONFIG_REG_POS_RBDC_SIZE (20)
-#define FH39_RCSR_RX_CONFIG_REG_POS_IRQ_RBTH (4)
-
-#define FH39_RCSR_RX_CONFIG_REG_BIT_WR_STTS_EN (0x08000000)
-
-#define FH39_RCSR_RX_CONFIG_REG_VAL_DMA_CHNL_EN_ENABLE (0x80000000)
-
-#define FH39_RCSR_RX_CONFIG_REG_VAL_RDRBD_EN_ENABLE (0x20000000)
-
-#define FH39_RCSR_RX_CONFIG_REG_VAL_MAX_FRAG_SIZE_128 (0x01000000)
-
-#define FH39_RCSR_RX_CONFIG_REG_VAL_IRQ_DEST_INT_HOST (0x00001000)
-
-#define FH39_RCSR_RX_CONFIG_REG_VAL_MSG_MODE_FH (0x00000000)
-
-#define FH39_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_TXF (0x00000000)
-#define FH39_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_DRIVER (0x00000001)
-
-#define FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_DISABLE_VAL (0x00000000)
-#define FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL (0x00000008)
-
-#define FH39_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_IFTFD (0x00200000)
-
-#define FH39_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_NOINT (0x00000000)
-
-#define FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_PAUSE (0x00000000)
-#define FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE (0x80000000)
-
-#define FH39_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_VALID (0x00004000)
-
-#define FH39_TCSR_CHNL_TX_BUF_STS_REG_BIT_TFDB_WPTR (0x00000001)
-
-#define FH39_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TXPD_ON (0xFF000000)
-#define FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_TXPD_ON (0x00FF0000)
-
-#define FH39_TSSR_TX_MSG_CONFIG_REG_VAL_MAX_FRAG_SIZE_128B (0x00000400)
-
-#define FH39_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TFD_ON (0x00000100)
-#define FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_CBB_ON (0x00000080)
-
-#define FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RSP_WAIT_TH (0x00000020)
-#define FH39_TSSR_TX_MSG_CONFIG_REG_VAL_RSP_WAIT_TH (0x00000005)
-
-#define FH39_TSSR_TX_STATUS_REG_BIT_BUFS_EMPTY(_ch) (BIT(_ch) << 24)
-#define FH39_TSSR_TX_STATUS_REG_BIT_NO_PEND_REQ(_ch) (BIT(_ch) << 16)
-
-#define FH39_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(_ch) \
- (FH39_TSSR_TX_STATUS_REG_BIT_BUFS_EMPTY(_ch) | \
- FH39_TSSR_TX_STATUS_REG_BIT_NO_PEND_REQ(_ch))
-
-#define FH39_RSSR_CHNL0_RX_STATUS_CHNL_IDLE (0x01000000)
-
-struct iwl3945_tfd_tb {
- __le32 addr;
- __le32 len;
-} __packed;
-
-struct iwl3945_tfd {
- __le32 control_flags;
- struct iwl3945_tfd_tb tbs[4];
- u8 __pad[28];
-} __packed;
-
-
-#endif /* __iwl_3945_fh_h__ */
-
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-hw.h b/drivers/net/wireless/iwlwifi/iwl-3945-hw.h
deleted file mode 100644
index 65b5834..0000000
--- a/drivers/net/wireless/iwlwifi/iwl-3945-hw.h
+++ /dev/null
@@ -1,294 +0,0 @@
-/******************************************************************************
- *
- * This file is provided under a dual BSD/GPLv2 license. When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
- * USA
- *
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * Contact Information:
- * Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- * BSD LICENSE
- *
- * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *****************************************************************************/
-/*
- * Please use this file (iwl-3945-hw.h) only for hardware-related definitions.
- * Please use iwl-commands.h for uCode API definitions.
- * Please use iwl-3945.h for driver implementation definitions.
- */
-
-#ifndef __iwl_3945_hw__
-#define __iwl_3945_hw__
-
-#include "iwl-eeprom.h"
-
-/* RSSI to dBm */
-#define IWL39_RSSI_OFFSET 95
-
-#define IWL_DEFAULT_TX_POWER 0x0F
-
-/*
- * EEPROM related constants, enums, and structures.
- */
-#define EEPROM_SKU_CAP_OP_MODE_MRC (1 << 7)
-
-/*
- * Mapping of a Tx power level, at factory calibration temperature,
- * to a radio/DSP gain table index.
- * One for each of 5 "sample" power levels in each band.
- * v_det is measured at the factory, using the 3945's built-in power amplifier
- * (PA) output voltage detector. This same detector is used during Tx of
- * long packets in normal operation to provide feedback as to proper output
- * level.
- * Data copied from EEPROM.
- * DO NOT ALTER THIS STRUCTURE!!!
- */
-struct iwl3945_eeprom_txpower_sample {
- u8 gain_index; /* index into power (gain) setup table ... */
- s8 power; /* ... for this pwr level for this chnl group */
- u16 v_det; /* PA output voltage */
-} __packed;
-
-/*
- * Mappings of Tx power levels -> nominal radio/DSP gain table indexes.
- * One for each channel group (a.k.a. "band") (1 for BG, 4 for A).
- * Tx power setup code interpolates between the 5 "sample" power levels
- * to determine the nominal setup for a requested power level.
- * Data copied from EEPROM.
- * DO NOT ALTER THIS STRUCTURE!!!
- */
-struct iwl3945_eeprom_txpower_group {
- struct iwl3945_eeprom_txpower_sample samples[5]; /* 5 power levels */
- s32 a, b, c, d, e; /* coefficients for voltage->power
- * formula (signed) */
- s32 Fa, Fb, Fc, Fd, Fe; /* these modify coeffs based on
- * frequency (signed) */
- s8 saturation_power; /* highest power possible by h/w in this
- * band */
- u8 group_channel; /* "representative" channel # in this band */
- s16 temperature; /* h/w temperature at factory calib this band
- * (signed) */
-} __packed;
-
-/*
- * Temperature-based Tx-power compensation data, not band-specific.
- * These coefficients are use to modify a/b/c/d/e coeffs based on
- * difference between current temperature and factory calib temperature.
- * Data copied from EEPROM.
- */
-struct iwl3945_eeprom_temperature_corr {
- u32 Ta;
- u32 Tb;
- u32 Tc;
- u32 Td;
- u32 Te;
-} __packed;
-
-/*
- * EEPROM map
- */
-struct iwl3945_eeprom {
- u8 reserved0[16];
- u16 device_id; /* abs.ofs: 16 */
- u8 reserved1[2];
- u16 pmc; /* abs.ofs: 20 */
- u8 reserved2[20];
- u8 mac_address[6]; /* abs.ofs: 42 */
- u8 reserved3[58];
- u16 board_revision; /* abs.ofs: 106 */
- u8 reserved4[11];
- u8 board_pba_number[9]; /* abs.ofs: 119 */
- u8 reserved5[8];
- u16 version; /* abs.ofs: 136 */
- u8 sku_cap; /* abs.ofs: 138 */
- u8 leds_mode; /* abs.ofs: 139 */
- u16 oem_mode;
- u16 wowlan_mode; /* abs.ofs: 142 */
- u16 leds_time_interval; /* abs.ofs: 144 */
- u8 leds_off_time; /* abs.ofs: 146 */
- u8 leds_on_time; /* abs.ofs: 147 */
- u8 almgor_m_version; /* abs.ofs: 148 */
- u8 antenna_switch_type; /* abs.ofs: 149 */
- u8 reserved6[42];
- u8 sku_id[4]; /* abs.ofs: 192 */
-
-/*
- * Per-channel regulatory data.
- *
- * Each channel that *might* be supported by 3945 or 4965 has a fixed location
- * in EEPROM containing EEPROM_CHANNEL_* usage flags (LSB) and max regulatory
- * txpower (MSB).
- *
- * Entries immediately below are for 20 MHz channel width. HT40 (40 MHz)
- * channels (only for 4965, not supported by 3945) appear later in the EEPROM.
- *
- * 2.4 GHz channels 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14
- */
- u16 band_1_count; /* abs.ofs: 196 */
- struct iwl_eeprom_channel band_1_channels[14]; /* abs.ofs: 198 */
-
-/*
- * 4.9 GHz channels 183, 184, 185, 187, 188, 189, 192, 196,
- * 5.0 GHz channels 7, 8, 11, 12, 16
- * (4915-5080MHz) (none of these is ever supported)
- */
- u16 band_2_count; /* abs.ofs: 226 */
- struct iwl_eeprom_channel band_2_channels[13]; /* abs.ofs: 228 */
-
-/*
- * 5.2 GHz channels 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64
- * (5170-5320MHz)
- */
- u16 band_3_count; /* abs.ofs: 254 */
- struct iwl_eeprom_channel band_3_channels[12]; /* abs.ofs: 256 */
-
-/*
- * 5.5 GHz channels 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
- * (5500-5700MHz)
- */
- u16 band_4_count; /* abs.ofs: 280 */
- struct iwl_eeprom_channel band_4_channels[11]; /* abs.ofs: 282 */
-
-/*
- * 5.7 GHz channels 145, 149, 153, 157, 161, 165
- * (5725-5825MHz)
- */
- u16 band_5_count; /* abs.ofs: 304 */
- struct iwl_eeprom_channel band_5_channels[6]; /* abs.ofs: 306 */
-
- u8 reserved9[194];
-
-/*
- * 3945 Txpower calibration data.
- */
-#define IWL_NUM_TX_CALIB_GROUPS 5
- struct iwl3945_eeprom_txpower_group groups[IWL_NUM_TX_CALIB_GROUPS];
-/* abs.ofs: 512 */
- struct iwl3945_eeprom_temperature_corr corrections; /* abs.ofs: 832 */
- u8 reserved16[172]; /* fill out to full 1024 byte block */
-} __packed;
-
-#define IWL3945_EEPROM_IMG_SIZE 1024
-
-/* End of EEPROM */
-
-#define PCI_CFG_REV_ID_BIT_BASIC_SKU (0x40) /* bit 6 */
-#define PCI_CFG_REV_ID_BIT_RTP (0x80) /* bit 7 */
-
-/* 4 DATA + 1 CMD. There are 2 HCCA queues that are not used. */
-#define IWL39_NUM_QUEUES 5
-#define IWL39_CMD_QUEUE_NUM 4
-
-#define IWL_DEFAULT_TX_RETRY 15
-
-/*********************************************/
-
-#define RFD_SIZE 4
-#define NUM_TFD_CHUNKS 4
-
-#define RX_QUEUE_SIZE 256
-#define RX_QUEUE_MASK 255
-#define RX_QUEUE_SIZE_LOG 8
-
-#define U32_PAD(n) ((4-(n))&0x3)
-
-#define TFD_CTL_COUNT_SET(n) (n << 24)
-#define TFD_CTL_COUNT_GET(ctl) ((ctl >> 24) & 7)
-#define TFD_CTL_PAD_SET(n) (n << 28)
-#define TFD_CTL_PAD_GET(ctl) (ctl >> 28)
-
-/* Sizes and addresses for instruction and data memory (SRAM) in
- * 3945's embedded processor. Driver access is via HBUS_TARG_MEM_* regs. */
-#define IWL39_RTC_INST_LOWER_BOUND (0x000000)
-#define IWL39_RTC_INST_UPPER_BOUND (0x014000)
-
-#define IWL39_RTC_DATA_LOWER_BOUND (0x800000)
-#define IWL39_RTC_DATA_UPPER_BOUND (0x808000)
-
-#define IWL39_RTC_INST_SIZE (IWL39_RTC_INST_UPPER_BOUND - \
- IWL39_RTC_INST_LOWER_BOUND)
-#define IWL39_RTC_DATA_SIZE (IWL39_RTC_DATA_UPPER_BOUND - \
- IWL39_RTC_DATA_LOWER_BOUND)
-
-#define IWL39_MAX_INST_SIZE IWL39_RTC_INST_SIZE
-#define IWL39_MAX_DATA_SIZE IWL39_RTC_DATA_SIZE
-
-/* Size of uCode instruction memory in bootstrap state machine */
-#define IWL39_MAX_BSM_SIZE IWL39_RTC_INST_SIZE
-
-static inline int iwl3945_hw_valid_rtc_data_addr(u32 addr)
-{
- return (addr >= IWL39_RTC_DATA_LOWER_BOUND) &&
- (addr < IWL39_RTC_DATA_UPPER_BOUND);
-}
-
-/* Base physical address of iwl3945_shared is provided to FH_TSSR_CBB_BASE
- * and &iwl3945_shared.rx_read_ptr[0] is provided to FH_RCSR_RPTR_ADDR(0) */
-struct iwl3945_shared {
- __le32 tx_base_ptr[8];
-} __packed;
-
-static inline u8 iwl3945_hw_get_rate(__le16 rate_n_flags)
-{
- return le16_to_cpu(rate_n_flags) & 0xFF;
-}
-
-static inline u16 iwl3945_hw_get_rate_n_flags(__le16 rate_n_flags)
-{
- return le16_to_cpu(rate_n_flags);
-}
-
-static inline __le16 iwl3945_hw_set_rate_n_flags(u8 rate, u16 flags)
-{
- return cpu_to_le16((u16)rate|flags);
-}
-#endif
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-led.c b/drivers/net/wireless/iwlwifi/iwl-3945-led.c
deleted file mode 100644
index dc7c3a4..0000000
--- a/drivers/net/wireless/iwlwifi/iwl-3945-led.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- * The full GNU General Public License is included in this distribution in the
- * file called LICENSE.
- *
- * Contact Information:
- * Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- *****************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/dma-mapping.h>
-#include <linux/delay.h>
-#include <linux/skbuff.h>
-#include <linux/netdevice.h>
-#include <linux/wireless.h>
-#include <net/mac80211.h>
-#include <linux/etherdevice.h>
-#include <asm/unaligned.h>
-
-#include "iwl-commands.h"
-#include "iwl-3945.h"
-#include "iwl-core.h"
-#include "iwl-dev.h"
-#include "iwl-3945-led.h"
-
-
-/* Send led command */
-static int iwl3945_send_led_cmd(struct iwl_priv *priv,
- struct iwl_led_cmd *led_cmd)
-{
- struct iwl_host_cmd cmd = {
- .id = REPLY_LEDS_CMD,
- .len = sizeof(struct iwl_led_cmd),
- .data = led_cmd,
- .flags = CMD_ASYNC,
- .callback = NULL,
- };
-
- return iwl_send_cmd(priv, &cmd);
-}
-
-const struct iwl_led_ops iwl3945_led_ops = {
- .cmd = iwl3945_send_led_cmd,
-};
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-led.h b/drivers/net/wireless/iwlwifi/iwl-3945-led.h
deleted file mode 100644
index ce990ad..0000000
--- a/drivers/net/wireless/iwlwifi/iwl-3945-led.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- * The full GNU General Public License is included in this distribution in the
- * file called LICENSE.
- *
- * Contact Information:
- * Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- *****************************************************************************/
-
-#ifndef __iwl_3945_led_h__
-#define __iwl_3945_led_h__
-
-extern const struct iwl_led_ops iwl3945_led_ops;
-
-#endif /* __iwl_3945_led_h__ */
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
deleted file mode 100644
index 1f3e7e3..0000000
--- a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
+++ /dev/null
@@ -1,995 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- * The full GNU General Public License is included in this distribution in the
- * file called LICENSE.
- *
- * Contact Information:
- * Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- *****************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/skbuff.h>
-#include <linux/slab.h>
-#include <linux/wireless.h>
-#include <net/mac80211.h>
-
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/delay.h>
-
-#include <linux/workqueue.h>
-
-#include "iwl-commands.h"
-#include "iwl-3945.h"
-#include "iwl-sta.h"
-
-#define RS_NAME "iwl-3945-rs"
-
-static s32 iwl3945_expected_tpt_g[IWL_RATE_COUNT_3945] = {
- 7, 13, 35, 58, 0, 0, 76, 104, 130, 168, 191, 202
-};
-
-static s32 iwl3945_expected_tpt_g_prot[IWL_RATE_COUNT_3945] = {
- 7, 13, 35, 58, 0, 0, 0, 80, 93, 113, 123, 125
-};
-
-static s32 iwl3945_expected_tpt_a[IWL_RATE_COUNT_3945] = {
- 0, 0, 0, 0, 40, 57, 72, 98, 121, 154, 177, 186
-};
-
-static s32 iwl3945_expected_tpt_b[IWL_RATE_COUNT_3945] = {
- 7, 13, 35, 58, 0, 0, 0, 0, 0, 0, 0, 0
-};
-
-struct iwl3945_tpt_entry {
- s8 min_rssi;
- u8 index;
-};
-
-static struct iwl3945_tpt_entry iwl3945_tpt_table_a[] = {
- {-60, IWL_RATE_54M_INDEX},
- {-64, IWL_RATE_48M_INDEX},
- {-72, IWL_RATE_36M_INDEX},
- {-80, IWL_RATE_24M_INDEX},
- {-84, IWL_RATE_18M_INDEX},
- {-85, IWL_RATE_12M_INDEX},
- {-87, IWL_RATE_9M_INDEX},
- {-89, IWL_RATE_6M_INDEX}
-};
-
-static struct iwl3945_tpt_entry iwl3945_tpt_table_g[] = {
- {-60, IWL_RATE_54M_INDEX},
- {-64, IWL_RATE_48M_INDEX},
- {-68, IWL_RATE_36M_INDEX},
- {-80, IWL_RATE_24M_INDEX},
- {-84, IWL_RATE_18M_INDEX},
- {-85, IWL_RATE_12M_INDEX},
- {-86, IWL_RATE_11M_INDEX},
- {-88, IWL_RATE_5M_INDEX},
- {-90, IWL_RATE_2M_INDEX},
- {-92, IWL_RATE_1M_INDEX}
-};
-
-#define IWL_RATE_MAX_WINDOW 62
-#define IWL_RATE_FLUSH (3*HZ)
-#define IWL_RATE_WIN_FLUSH (HZ/2)
-#define IWL39_RATE_HIGH_TH 11520
-#define IWL_SUCCESS_UP_TH 8960
-#define IWL_SUCCESS_DOWN_TH 10880
-#define IWL_RATE_MIN_FAILURE_TH 6
-#define IWL_RATE_MIN_SUCCESS_TH 8
-#define IWL_RATE_DECREASE_TH 1920
-#define IWL_RATE_RETRY_TH 15
-
-static u8 iwl3945_get_rate_index_by_rssi(s32 rssi, enum ieee80211_band band)
-{
- u32 index = 0;
- u32 table_size = 0;
- struct iwl3945_tpt_entry *tpt_table = NULL;
-
- if ((rssi < IWL_MIN_RSSI_VAL) || (rssi > IWL_MAX_RSSI_VAL))
- rssi = IWL_MIN_RSSI_VAL;
-
- switch (band) {
- case IEEE80211_BAND_2GHZ:
- tpt_table = iwl3945_tpt_table_g;
- table_size = ARRAY_SIZE(iwl3945_tpt_table_g);
- break;
-
- case IEEE80211_BAND_5GHZ:
- tpt_table = iwl3945_tpt_table_a;
- table_size = ARRAY_SIZE(iwl3945_tpt_table_a);
- break;
-
- default:
- BUG();
- break;
- }
-
- while ((index < table_size) && (rssi < tpt_table[index].min_rssi))
- index++;
-
- index = min(index, (table_size - 1));
-
- return tpt_table[index].index;
-}
-
-static void iwl3945_clear_window(struct iwl3945_rate_scale_data *window)
-{
- window->data = 0;
- window->success_counter = 0;
- window->success_ratio = -1;
- window->counter = 0;
- window->average_tpt = IWL_INVALID_VALUE;
- window->stamp = 0;
-}
-
-/**
- * iwl3945_rate_scale_flush_windows - flush out the rate scale windows
- *
- * Returns the number of windows that have gathered data but were
- * not flushed. If there were any that were not flushed, then
- * reschedule the rate flushing routine.
- */
-static int iwl3945_rate_scale_flush_windows(struct iwl3945_rs_sta *rs_sta)
-{
- int unflushed = 0;
- int i;
- unsigned long flags;
- struct iwl_priv *priv __maybe_unused = rs_sta->priv;
-
- /*
- * For each rate, if we have collected data on that rate
- * and it has been more than IWL_RATE_WIN_FLUSH
- * since we flushed, clear out the gathered statistics
- */
- for (i = 0; i < IWL_RATE_COUNT_3945; i++) {
- if (!rs_sta->win[i].counter)
- continue;
-
- spin_lock_irqsave(&rs_sta->lock, flags);
- if (time_after(jiffies, rs_sta->win[i].stamp +
- IWL_RATE_WIN_FLUSH)) {
- IWL_DEBUG_RATE(priv, "flushing %d samples of rate "
- "index %d\n",
- rs_sta->win[i].counter, i);
- iwl3945_clear_window(&rs_sta->win[i]);
- } else
- unflushed++;
- spin_unlock_irqrestore(&rs_sta->lock, flags);
- }
-
- return unflushed;
-}
-
-#define IWL_RATE_FLUSH_MAX 5000 /* msec */
-#define IWL_RATE_FLUSH_MIN 50 /* msec */
-#define IWL_AVERAGE_PACKETS 1500
-
-static void iwl3945_bg_rate_scale_flush(unsigned long data)
-{
- struct iwl3945_rs_sta *rs_sta = (void *)data;
- struct iwl_priv *priv __maybe_unused = rs_sta->priv;
- int unflushed = 0;
- unsigned long flags;
- u32 packet_count, duration, pps;
-
- IWL_DEBUG_RATE(priv, "enter\n");
-
- unflushed = iwl3945_rate_scale_flush_windows(rs_sta);
-
- spin_lock_irqsave(&rs_sta->lock, flags);
-
- /* Number of packets Rx'd since last time this timer ran */
- packet_count = (rs_sta->tx_packets - rs_sta->last_tx_packets) + 1;
-
- rs_sta->last_tx_packets = rs_sta->tx_packets + 1;
-
- if (unflushed) {
- duration =
- jiffies_to_msecs(jiffies - rs_sta->last_partial_flush);
-
- IWL_DEBUG_RATE(priv, "Tx'd %d packets in %dms\n",
- packet_count, duration);
-
- /* Determine packets per second */
- if (duration)
- pps = (packet_count * 1000) / duration;
- else
- pps = 0;
-
- if (pps) {
- duration = (IWL_AVERAGE_PACKETS * 1000) / pps;
- if (duration < IWL_RATE_FLUSH_MIN)
- duration = IWL_RATE_FLUSH_MIN;
- else if (duration > IWL_RATE_FLUSH_MAX)
- duration = IWL_RATE_FLUSH_MAX;
- } else
- duration = IWL_RATE_FLUSH_MAX;
-
- rs_sta->flush_time = msecs_to_jiffies(duration);
-
- IWL_DEBUG_RATE(priv, "new flush period: %d msec ave %d\n",
- duration, packet_count);
-
- mod_timer(&rs_sta->rate_scale_flush, jiffies +
- rs_sta->flush_time);
-
- rs_sta->last_partial_flush = jiffies;
- } else {
- rs_sta->flush_time = IWL_RATE_FLUSH;
- rs_sta->flush_pending = 0;
- }
- /* If there weren't any unflushed entries, we don't schedule the timer
- * to run again */
-
- rs_sta->last_flush = jiffies;
-
- spin_unlock_irqrestore(&rs_sta->lock, flags);
-
- IWL_DEBUG_RATE(priv, "leave\n");
-}
-
-/**
- * iwl3945_collect_tx_data - Update the success/failure sliding window
- *
- * We keep a sliding window of the last 64 packets transmitted
- * at this rate. window->data contains the bitmask of successful
- * packets.
- */
-static void iwl3945_collect_tx_data(struct iwl3945_rs_sta *rs_sta,
- struct iwl3945_rate_scale_data *window,
- int success, int retries, int index)
-{
- unsigned long flags;
- s32 fail_count;
- struct iwl_priv *priv __maybe_unused = rs_sta->priv;
-
- if (!retries) {
- IWL_DEBUG_RATE(priv, "leave: retries == 0 -- should be at least 1\n");
- return;
- }
-
- spin_lock_irqsave(&rs_sta->lock, flags);
-
- /*
- * Keep track of only the latest 62 tx frame attempts in this rate's
- * history window; anything older isn't really relevant any more.
- * If we have filled up the sliding window, drop the oldest attempt;
- * if the oldest attempt (highest bit in bitmap) shows "success",
- * subtract "1" from the success counter (this is the main reason
- * we keep these bitmaps!).
- * */
- while (retries > 0) {
- if (window->counter >= IWL_RATE_MAX_WINDOW) {
-
- /* remove earliest */
- window->counter = IWL_RATE_MAX_WINDOW - 1;
-
- if (window->data & (1ULL << (IWL_RATE_MAX_WINDOW - 1))) {
- window->data &= ~(1ULL << (IWL_RATE_MAX_WINDOW - 1));
- window->success_counter--;
- }
- }
-
- /* Increment frames-attempted counter */
- window->counter++;
-
- /* Shift bitmap by one frame (throw away oldest history),
- * OR in "1", and increment "success" if this
- * frame was successful. */
- window->data <<= 1;
- if (success > 0) {
- window->success_counter++;
- window->data |= 0x1;
- success--;
- }
-
- retries--;
- }
-
- /* Calculate current success ratio, avoid divide-by-0! */
- if (window->counter > 0)
- window->success_ratio = 128 * (100 * window->success_counter)
- / window->counter;
- else
- window->success_ratio = IWL_INVALID_VALUE;
-
- fail_count = window->counter - window->success_counter;
-
- /* Calculate average throughput, if we have enough history. */
- if ((fail_count >= IWL_RATE_MIN_FAILURE_TH) ||
- (window->success_counter >= IWL_RATE_MIN_SUCCESS_TH))
- window->average_tpt = ((window->success_ratio *
- rs_sta->expected_tpt[index] + 64) / 128);
- else
- window->average_tpt = IWL_INVALID_VALUE;
-
- /* Tag this window as having been updated */
- window->stamp = jiffies;
-
- spin_unlock_irqrestore(&rs_sta->lock, flags);
-
-}
-
-/*
- * Called after adding a new station to initialize rate scaling
- */
-void iwl3945_rs_rate_init(struct iwl_priv *priv, struct ieee80211_sta *sta, u8 sta_id)
-{
- struct ieee80211_hw *hw = priv->hw;
- struct ieee80211_conf *conf = &priv->hw->conf;
- struct iwl3945_sta_priv *psta;
- struct iwl3945_rs_sta *rs_sta;
- struct ieee80211_supported_band *sband;
- int i;
-
- IWL_DEBUG_INFO(priv, "enter\n");
- if (sta_id == priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id)
- goto out;
-
- psta = (struct iwl3945_sta_priv *) sta->drv_priv;
- rs_sta = &psta->rs_sta;
- sband = hw->wiphy->bands[conf->channel->band];
-
- rs_sta->priv = priv;
-
- rs_sta->start_rate = IWL_RATE_INVALID;
-
- /* default to just 802.11b */
- rs_sta->expected_tpt = iwl3945_expected_tpt_b;
-
- rs_sta->last_partial_flush = jiffies;
- rs_sta->last_flush = jiffies;
- rs_sta->flush_time = IWL_RATE_FLUSH;
- rs_sta->last_tx_packets = 0;
-
- rs_sta->rate_scale_flush.data = (unsigned long)rs_sta;
- rs_sta->rate_scale_flush.function = iwl3945_bg_rate_scale_flush;
-
- for (i = 0; i < IWL_RATE_COUNT_3945; i++)
- iwl3945_clear_window(&rs_sta->win[i]);
-
- /* TODO: what is a good starting rate for STA? About middle? Maybe not
- * the lowest or the highest rate.. Could consider using RSSI from
- * previous packets? Need to have IEEE 802.1X auth succeed immediately
- * after assoc.. */
-
- for (i = sband->n_bitrates - 1; i >= 0; i--) {
- if (sta->supp_rates[sband->band] & (1 << i)) {
- rs_sta->last_txrate_idx = i;
- break;
- }
- }
-
- priv->_3945.sta_supp_rates = sta->supp_rates[sband->band];
- /* For 5 GHz band it start at IWL_FIRST_OFDM_RATE */
- if (sband->band == IEEE80211_BAND_5GHZ) {
- rs_sta->last_txrate_idx += IWL_FIRST_OFDM_RATE;
- priv->_3945.sta_supp_rates = priv->_3945.sta_supp_rates <<
- IWL_FIRST_OFDM_RATE;
- }
-
-out:
- priv->stations[sta_id].used &= ~IWL_STA_UCODE_INPROGRESS;
-
- IWL_DEBUG_INFO(priv, "leave\n");
-}
-
-static void *rs_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir)
-{
- return hw->priv;
-}
-
-/* rate scale requires free function to be implemented */
-static void rs_free(void *priv)
-{
- return;
-}
-
-static void *rs_alloc_sta(void *iwl_priv, struct ieee80211_sta *sta, gfp_t gfp)
-{
- struct iwl3945_rs_sta *rs_sta;
- struct iwl3945_sta_priv *psta = (void *) sta->drv_priv;
- struct iwl_priv *priv __maybe_unused = iwl_priv;
-
- IWL_DEBUG_RATE(priv, "enter\n");
-
- rs_sta = &psta->rs_sta;
-
- spin_lock_init(&rs_sta->lock);
- init_timer(&rs_sta->rate_scale_flush);
-
- IWL_DEBUG_RATE(priv, "leave\n");
-
- return rs_sta;
-}
-
-static void rs_free_sta(void *iwl_priv, struct ieee80211_sta *sta,
- void *priv_sta)
-{
- struct iwl3945_rs_sta *rs_sta = priv_sta;
-
- /*
- * Be careful not to use any members of iwl3945_rs_sta (like trying
- * to use iwl_priv to print out debugging) since it may not be fully
- * initialized at this point.
- */
- del_timer_sync(&rs_sta->rate_scale_flush);
-}
-
-
-/**
- * rs_tx_status - Update rate control values based on Tx results
- *
- * NOTE: Uses iwl_priv->retry_rate for the # of retries attempted by
- * the hardware for each rate.
- */
-static void rs_tx_status(void *priv_rate, struct ieee80211_supported_band *sband,
- struct ieee80211_sta *sta, void *priv_sta,
- struct sk_buff *skb)
-{
- s8 retries = 0, current_count;
- int scale_rate_index, first_index, last_index;
- unsigned long flags;
- struct iwl_priv *priv = (struct iwl_priv *)priv_rate;
- struct iwl3945_rs_sta *rs_sta = priv_sta;
- struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
-
- IWL_DEBUG_RATE(priv, "enter\n");
-
- retries = info->status.rates[0].count;
- /* Sanity Check for retries */
- if (retries > IWL_RATE_RETRY_TH)
- retries = IWL_RATE_RETRY_TH;
-
- first_index = sband->bitrates[info->status.rates[0].idx].hw_value;
- if ((first_index < 0) || (first_index >= IWL_RATE_COUNT_3945)) {
- IWL_DEBUG_RATE(priv, "leave: Rate out of bounds: %d\n", first_index);
- return;
- }
-
- if (!priv_sta) {
- IWL_DEBUG_RATE(priv, "leave: No STA priv data to update!\n");
- return;
- }
-
- /* Treat uninitialized rate scaling data same as non-existing. */
- if (!rs_sta->priv) {
- IWL_DEBUG_RATE(priv, "leave: STA priv data uninitialized!\n");
- return;
- }
-
-
- rs_sta->tx_packets++;
-
- scale_rate_index = first_index;
- last_index = first_index;
-
- /*
- * Update the window for each rate. We determine which rates
- * were Tx'd based on the total number of retries vs. the number
- * of retries configured for each rate -- currently set to the
- * priv value 'retry_rate' vs. rate specific
- *
- * On exit from this while loop last_index indicates the rate
- * at which the frame was finally transmitted (or failed if no
- * ACK)
- */
- while (retries > 1) {
- if ((retries - 1) < priv->retry_rate) {
- current_count = (retries - 1);
- last_index = scale_rate_index;
- } else {
- current_count = priv->retry_rate;
- last_index = iwl3945_rs_next_rate(priv,
- scale_rate_index);
- }
-
- /* Update this rate accounting for as many retries
- * as was used for it (per current_count) */
- iwl3945_collect_tx_data(rs_sta,
- &rs_sta->win[scale_rate_index],
- 0, current_count, scale_rate_index);
- IWL_DEBUG_RATE(priv, "Update rate %d for %d retries.\n",
- scale_rate_index, current_count);
-
- retries -= current_count;
-
- scale_rate_index = last_index;
- }
-
-
- /* Update the last index window with success/failure based on ACK */
- IWL_DEBUG_RATE(priv, "Update rate %d with %s.\n",
- last_index,
- (info->flags & IEEE80211_TX_STAT_ACK) ?
- "success" : "failure");
- iwl3945_collect_tx_data(rs_sta,
- &rs_sta->win[last_index],
- info->flags & IEEE80211_TX_STAT_ACK, 1, last_index);
-
- /* We updated the rate scale window -- if its been more than
- * flush_time since the last run, schedule the flush
- * again */
- spin_lock_irqsave(&rs_sta->lock, flags);
-
- if (!rs_sta->flush_pending &&
- time_after(jiffies, rs_sta->last_flush +
- rs_sta->flush_time)) {
-
- rs_sta->last_partial_flush = jiffies;
- rs_sta->flush_pending = 1;
- mod_timer(&rs_sta->rate_scale_flush,
- jiffies + rs_sta->flush_time);
- }
-
- spin_unlock_irqrestore(&rs_sta->lock, flags);
-
- IWL_DEBUG_RATE(priv, "leave\n");
-}
-
-static u16 iwl3945_get_adjacent_rate(struct iwl3945_rs_sta *rs_sta,
- u8 index, u16 rate_mask, enum ieee80211_band band)
-{
- u8 high = IWL_RATE_INVALID;
- u8 low = IWL_RATE_INVALID;
- struct iwl_priv *priv __maybe_unused = rs_sta->priv;
-
- /* 802.11A walks to the next literal adjacent rate in
- * the rate table */
- if (unlikely(band == IEEE80211_BAND_5GHZ)) {
- int i;
- u32 mask;
-
- /* Find the previous rate that is in the rate mask */
- i = index - 1;
- for (mask = (1 << i); i >= 0; i--, mask >>= 1) {
- if (rate_mask & mask) {
- low = i;
- break;
- }
- }
-
- /* Find the next rate that is in the rate mask */
- i = index + 1;
- for (mask = (1 << i); i < IWL_RATE_COUNT_3945;
- i++, mask <<= 1) {
- if (rate_mask & mask) {
- high = i;
- break;
- }
- }
-
- return (high << 8) | low;
- }
-
- low = index;
- while (low != IWL_RATE_INVALID) {
- if (rs_sta->tgg)
- low = iwl3945_rates[low].prev_rs_tgg;
- else
- low = iwl3945_rates[low].prev_rs;
- if (low == IWL_RATE_INVALID)
- break;
- if (rate_mask & (1 << low))
- break;
- IWL_DEBUG_RATE(priv, "Skipping masked lower rate: %d\n", low);
- }
-
- high = index;
- while (high != IWL_RATE_INVALID) {
- if (rs_sta->tgg)
- high = iwl3945_rates[high].next_rs_tgg;
- else
- high = iwl3945_rates[high].next_rs;
- if (high == IWL_RATE_INVALID)
- break;
- if (rate_mask & (1 << high))
- break;
- IWL_DEBUG_RATE(priv, "Skipping masked higher rate: %d\n", high);
- }
-
- return (high << 8) | low;
-}
-
-/**
- * rs_get_rate - find the rate for the requested packet
- *
- * Returns the ieee80211_rate structure allocated by the driver.
- *
- * The rate control algorithm has no internal mapping between hw_mode's
- * rate ordering and the rate ordering used by the rate control algorithm.
- *
- * The rate control algorithm uses a single table of rates that goes across
- * the entire A/B/G spectrum vs. being limited to just one particular
- * hw_mode.
- *
- * As such, we can't convert the index obtained below into the hw_mode's
- * rate table and must reference the driver allocated rate table
- *
- */
-static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta,
- void *priv_sta, struct ieee80211_tx_rate_control *txrc)
-{
- struct ieee80211_supported_band *sband = txrc->sband;
- struct sk_buff *skb = txrc->skb;
- u8 low = IWL_RATE_INVALID;
- u8 high = IWL_RATE_INVALID;
- u16 high_low;
- int index;
- struct iwl3945_rs_sta *rs_sta = priv_sta;
- struct iwl3945_rate_scale_data *window = NULL;
- int current_tpt = IWL_INVALID_VALUE;
- int low_tpt = IWL_INVALID_VALUE;
- int high_tpt = IWL_INVALID_VALUE;
- u32 fail_count;
- s8 scale_action = 0;
- unsigned long flags;
- u16 rate_mask = sta ? sta->supp_rates[sband->band] : 0;
- s8 max_rate_idx = -1;
- struct iwl_priv *priv __maybe_unused = (struct iwl_priv *)priv_r;
- struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
-
- IWL_DEBUG_RATE(priv, "enter\n");
-
- /* Treat uninitialized rate scaling data same as non-existing. */
- if (rs_sta && !rs_sta->priv) {
- IWL_DEBUG_RATE(priv, "Rate scaling information not initialized yet.\n");
- priv_sta = NULL;
- }
-
- if (rate_control_send_low(sta, priv_sta, txrc))
- return;
-
- rate_mask = sta->supp_rates[sband->band];
-
- /* get user max rate if set */
- max_rate_idx = txrc->max_rate_idx;
- if ((sband->band == IEEE80211_BAND_5GHZ) && (max_rate_idx != -1))
- max_rate_idx += IWL_FIRST_OFDM_RATE;
- if ((max_rate_idx < 0) || (max_rate_idx >= IWL_RATE_COUNT))
- max_rate_idx = -1;
-
- index = min(rs_sta->last_txrate_idx & 0xffff, IWL_RATE_COUNT_3945 - 1);
-
- if (sband->band == IEEE80211_BAND_5GHZ)
- rate_mask = rate_mask << IWL_FIRST_OFDM_RATE;
-
- spin_lock_irqsave(&rs_sta->lock, flags);
-
- /* for recent assoc, choose best rate regarding
- * to rssi value
- */
- if (rs_sta->start_rate != IWL_RATE_INVALID) {
- if (rs_sta->start_rate < index &&
- (rate_mask & (1 << rs_sta->start_rate)))
- index = rs_sta->start_rate;
- rs_sta->start_rate = IWL_RATE_INVALID;
- }
-
- /* force user max rate if set by user */
- if ((max_rate_idx != -1) && (max_rate_idx < index)) {
- if (rate_mask & (1 << max_rate_idx))
- index = max_rate_idx;
- }
-
- window = &(rs_sta->win[index]);
-
- fail_count = window->counter - window->success_counter;
-
- if (((fail_count < IWL_RATE_MIN_FAILURE_TH) &&
- (window->success_counter < IWL_RATE_MIN_SUCCESS_TH))) {
- spin_unlock_irqrestore(&rs_sta->lock, flags);
-
- IWL_DEBUG_RATE(priv, "Invalid average_tpt on rate %d: "
- "counter: %d, success_counter: %d, "
- "expected_tpt is %sNULL\n",
- index,
- window->counter,
- window->success_counter,
- rs_sta->expected_tpt ? "not " : "");
-
- /* Can't calculate this yet; not enough history */
- window->average_tpt = IWL_INVALID_VALUE;
- goto out;
-
- }
-
- current_tpt = window->average_tpt;
-
- high_low = iwl3945_get_adjacent_rate(rs_sta, index, rate_mask,
- sband->band);
- low = high_low & 0xff;
- high = (high_low >> 8) & 0xff;
-
- /* If user set max rate, dont allow higher than user constrain */
- if ((max_rate_idx != -1) && (max_rate_idx < high))
- high = IWL_RATE_INVALID;
-
- /* Collect Measured throughputs of adjacent rates */
- if (low != IWL_RATE_INVALID)
- low_tpt = rs_sta->win[low].average_tpt;
-
- if (high != IWL_RATE_INVALID)
- high_tpt = rs_sta->win[high].average_tpt;
-
- spin_unlock_irqrestore(&rs_sta->lock, flags);
-
- scale_action = 0;
-
- /* Low success ratio , need to drop the rate */
- if ((window->success_ratio < IWL_RATE_DECREASE_TH) || !current_tpt) {
- IWL_DEBUG_RATE(priv, "decrease rate because of low success_ratio\n");
- scale_action = -1;
- /* No throughput measured yet for adjacent rates,
- * try increase */
- } else if ((low_tpt == IWL_INVALID_VALUE) &&
- (high_tpt == IWL_INVALID_VALUE)) {
-
- if (high != IWL_RATE_INVALID && window->success_ratio >= IWL_RATE_INCREASE_TH)
- scale_action = 1;
- else if (low != IWL_RATE_INVALID)
- scale_action = 0;
-
- /* Both adjacent throughputs are measured, but neither one has
- * better throughput; we're using the best rate, don't change
- * it! */
- } else if ((low_tpt != IWL_INVALID_VALUE) &&
- (high_tpt != IWL_INVALID_VALUE) &&
- (low_tpt < current_tpt) && (high_tpt < current_tpt)) {
-
- IWL_DEBUG_RATE(priv, "No action -- low [%d] & high [%d] < "
- "current_tpt [%d]\n",
- low_tpt, high_tpt, current_tpt);
- scale_action = 0;
-
- /* At least one of the rates has better throughput */
- } else {
- if (high_tpt != IWL_INVALID_VALUE) {
-
- /* High rate has better throughput, Increase
- * rate */
- if (high_tpt > current_tpt &&
- window->success_ratio >= IWL_RATE_INCREASE_TH)
- scale_action = 1;
- else {
- IWL_DEBUG_RATE(priv,
- "decrease rate because of high tpt\n");
- scale_action = 0;
- }
- } else if (low_tpt != IWL_INVALID_VALUE) {
- if (low_tpt > current_tpt) {
- IWL_DEBUG_RATE(priv,
- "decrease rate because of low tpt\n");
- scale_action = -1;
- } else if (window->success_ratio >= IWL_RATE_INCREASE_TH) {
- /* Lower rate has better
- * throughput,decrease rate */
- scale_action = 1;
- }
- }
- }
-
- /* Sanity check; asked for decrease, but success rate or throughput
- * has been good at old rate. Don't change it. */
- if ((scale_action == -1) && (low != IWL_RATE_INVALID) &&
- ((window->success_ratio > IWL_RATE_HIGH_TH) ||
- (current_tpt > (100 * rs_sta->expected_tpt[low]))))
- scale_action = 0;
-
- switch (scale_action) {
- case -1:
-
- /* Decrese rate */
- if (low != IWL_RATE_INVALID)
- index = low;
- break;
-
- case 1:
- /* Increase rate */
- if (high != IWL_RATE_INVALID)
- index = high;
-
- break;
-
- case 0:
- default:
- /* No change */
- break;
- }
-
- IWL_DEBUG_RATE(priv, "Selected %d (action %d) - low %d high %d\n",
- index, scale_action, low, high);
-
- out:
-
- rs_sta->last_txrate_idx = index;
- if (sband->band == IEEE80211_BAND_5GHZ)
- info->control.rates[0].idx = rs_sta->last_txrate_idx -
- IWL_FIRST_OFDM_RATE;
- else
- info->control.rates[0].idx = rs_sta->last_txrate_idx;
-
- IWL_DEBUG_RATE(priv, "leave: %d\n", index);
-}
-
-#ifdef CONFIG_MAC80211_DEBUGFS
-static int iwl3945_open_file_generic(struct inode *inode, struct file *file)
-{
- file->private_data = inode->i_private;
- return 0;
-}
-
-static ssize_t iwl3945_sta_dbgfs_stats_table_read(struct file *file,
- char __user *user_buf,
- size_t count, loff_t *ppos)
-{
- char *buff;
- int desc = 0;
- int j;
- ssize_t ret;
- struct iwl3945_rs_sta *lq_sta = file->private_data;
-
- buff = kmalloc(1024, GFP_KERNEL);
- if (!buff)
- return -ENOMEM;
-
- desc += sprintf(buff + desc, "tx packets=%d last rate index=%d\n"
- "rate=0x%X flush time %d\n",
- lq_sta->tx_packets,
- lq_sta->last_txrate_idx,
- lq_sta->start_rate, jiffies_to_msecs(lq_sta->flush_time));
- for (j = 0; j < IWL_RATE_COUNT_3945; j++) {
- desc += sprintf(buff+desc,
- "counter=%d success=%d %%=%d\n",
- lq_sta->win[j].counter,
- lq_sta->win[j].success_counter,
- lq_sta->win[j].success_ratio);
- }
- ret = simple_read_from_buffer(user_buf, count, ppos, buff, desc);
- kfree(buff);
- return ret;
-}
-
-static const struct file_operations rs_sta_dbgfs_stats_table_ops = {
- .read = iwl3945_sta_dbgfs_stats_table_read,
- .open = iwl3945_open_file_generic,
- .llseek = default_llseek,
-};
-
-static void iwl3945_add_debugfs(void *priv, void *priv_sta,
- struct dentry *dir)
-{
- struct iwl3945_rs_sta *lq_sta = priv_sta;
-
- lq_sta->rs_sta_dbgfs_stats_table_file =
- debugfs_create_file("rate_stats_table", 0600, dir,
- lq_sta, &rs_sta_dbgfs_stats_table_ops);
-
-}
-
-static void iwl3945_remove_debugfs(void *priv, void *priv_sta)
-{
- struct iwl3945_rs_sta *lq_sta = priv_sta;
- debugfs_remove(lq_sta->rs_sta_dbgfs_stats_table_file);
-}
-#endif
-
-/*
- * Initialization of rate scaling information is done by driver after
- * the station is added. Since mac80211 calls this function before a
- * station is added we ignore it.
- */
-static void rs_rate_init_stub(void *priv_r, struct ieee80211_supported_band *sband,
- struct ieee80211_sta *sta, void *priv_sta)
-{
-}
-
-static struct rate_control_ops rs_ops = {
- .module = NULL,
- .name = RS_NAME,
- .tx_status = rs_tx_status,
- .get_rate = rs_get_rate,
- .rate_init = rs_rate_init_stub,
- .alloc = rs_alloc,
- .free = rs_free,
- .alloc_sta = rs_alloc_sta,
- .free_sta = rs_free_sta,
-#ifdef CONFIG_MAC80211_DEBUGFS
- .add_sta_debugfs = iwl3945_add_debugfs,
- .remove_sta_debugfs = iwl3945_remove_debugfs,
-#endif
-
-};
-void iwl3945_rate_scale_init(struct ieee80211_hw *hw, s32 sta_id)
-{
- struct iwl_priv *priv = hw->priv;
- s32 rssi = 0;
- unsigned long flags;
- struct iwl3945_rs_sta *rs_sta;
- struct ieee80211_sta *sta;
- struct iwl3945_sta_priv *psta;
-
- IWL_DEBUG_RATE(priv, "enter\n");
-
- rcu_read_lock();
-
- sta = ieee80211_find_sta(priv->contexts[IWL_RXON_CTX_BSS].vif,
- priv->stations[sta_id].sta.sta.addr);
- if (!sta) {
- IWL_DEBUG_RATE(priv, "Unable to find station to initialize rate scaling.\n");
- rcu_read_unlock();
- return;
- }
-
- psta = (void *) sta->drv_priv;
- rs_sta = &psta->rs_sta;
-
- spin_lock_irqsave(&rs_sta->lock, flags);
-
- rs_sta->tgg = 0;
- switch (priv->band) {
- case IEEE80211_BAND_2GHZ:
- /* TODO: this always does G, not a regression */
- if (priv->contexts[IWL_RXON_CTX_BSS].active.flags &
- RXON_FLG_TGG_PROTECT_MSK) {
- rs_sta->tgg = 1;
- rs_sta->expected_tpt = iwl3945_expected_tpt_g_prot;
- } else
- rs_sta->expected_tpt = iwl3945_expected_tpt_g;
- break;
-
- case IEEE80211_BAND_5GHZ:
- rs_sta->expected_tpt = iwl3945_expected_tpt_a;
- break;
- case IEEE80211_NUM_BANDS:
- BUG();
- break;
- }
-
- spin_unlock_irqrestore(&rs_sta->lock, flags);
-
- rssi = priv->_3945.last_rx_rssi;
- if (rssi == 0)
- rssi = IWL_MIN_RSSI_VAL;
-
- IWL_DEBUG_RATE(priv, "Network RSSI: %d\n", rssi);
-
- rs_sta->start_rate = iwl3945_get_rate_index_by_rssi(rssi, priv->band);
-
- IWL_DEBUG_RATE(priv, "leave: rssi %d assign rate index: "
- "%d (plcp 0x%x)\n", rssi, rs_sta->start_rate,
- iwl3945_rates[rs_sta->start_rate].plcp);
- rcu_read_unlock();
-}
-
-int iwl3945_rate_control_register(void)
-{
- return ieee80211_rate_control_register(&rs_ops);
-}
-
-void iwl3945_rate_control_unregister(void)
-{
- ieee80211_rate_control_unregister(&rs_ops);
-}
-
-
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c
deleted file mode 100644
index 5b6932c..0000000
--- a/drivers/net/wireless/iwlwifi/iwl-3945.c
+++ /dev/null
@@ -1,2819 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- * The full GNU General Public License is included in this distribution in the
- * file called LICENSE.
- *
- * Contact Information:
- * Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- *****************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/pci.h>
-#include <linux/dma-mapping.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-#include <linux/skbuff.h>
-#include <linux/netdevice.h>
-#include <linux/wireless.h>
-#include <linux/firmware.h>
-#include <linux/etherdevice.h>
-#include <asm/unaligned.h>
-#include <net/mac80211.h>
-
-#include "iwl-fh.h"
-#include "iwl-3945-fh.h"
-#include "iwl-commands.h"
-#include "iwl-sta.h"
-#include "iwl-3945.h"
-#include "iwl-eeprom.h"
-#include "iwl-core.h"
-#include "iwl-helpers.h"
-#include "iwl-led.h"
-#include "iwl-3945-led.h"
-#include "iwl-3945-debugfs.h"
-#include "iwl-legacy.h"
-
-#define IWL_DECLARE_RATE_INFO(r, ip, in, rp, rn, pp, np) \
- [IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP, \
- IWL_RATE_##r##M_IEEE, \
- IWL_RATE_##ip##M_INDEX, \
- IWL_RATE_##in##M_INDEX, \
- IWL_RATE_##rp##M_INDEX, \
- IWL_RATE_##rn##M_INDEX, \
- IWL_RATE_##pp##M_INDEX, \
- IWL_RATE_##np##M_INDEX, \
- IWL_RATE_##r##M_INDEX_TABLE, \
- IWL_RATE_##ip##M_INDEX_TABLE }
-
-/*
- * Parameter order:
- * rate, prev rate, next rate, prev tgg rate, next tgg rate
- *
- * If there isn't a valid next or previous rate then INV is used which
- * maps to IWL_RATE_INVALID
- *
- */
-const struct iwl3945_rate_info iwl3945_rates[IWL_RATE_COUNT_3945] = {
- IWL_DECLARE_RATE_INFO(1, INV, 2, INV, 2, INV, 2), /* 1mbps */
- IWL_DECLARE_RATE_INFO(2, 1, 5, 1, 5, 1, 5), /* 2mbps */
- IWL_DECLARE_RATE_INFO(5, 2, 6, 2, 11, 2, 11), /*5.5mbps */
- IWL_DECLARE_RATE_INFO(11, 9, 12, 5, 12, 5, 18), /* 11mbps */
- IWL_DECLARE_RATE_INFO(6, 5, 9, 5, 11, 5, 11), /* 6mbps */
- IWL_DECLARE_RATE_INFO(9, 6, 11, 5, 11, 5, 11), /* 9mbps */
- IWL_DECLARE_RATE_INFO(12, 11, 18, 11, 18, 11, 18), /* 12mbps */
- IWL_DECLARE_RATE_INFO(18, 12, 24, 12, 24, 11, 24), /* 18mbps */
- IWL_DECLARE_RATE_INFO(24, 18, 36, 18, 36, 18, 36), /* 24mbps */
- IWL_DECLARE_RATE_INFO(36, 24, 48, 24, 48, 24, 48), /* 36mbps */
- IWL_DECLARE_RATE_INFO(48, 36, 54, 36, 54, 36, 54), /* 48mbps */
- IWL_DECLARE_RATE_INFO(54, 48, INV, 48, INV, 48, INV),/* 54mbps */
-};
-
-static inline u8 iwl3945_get_prev_ieee_rate(u8 rate_index)
-{
- u8 rate = iwl3945_rates[rate_index].prev_ieee;
-
- if (rate == IWL_RATE_INVALID)
- rate = rate_index;
- return rate;
-}
-
-/* 1 = enable the iwl3945_disable_events() function */
-#define IWL_EVT_DISABLE (0)
-#define IWL_EVT_DISABLE_SIZE (1532/32)
-
-/**
- * iwl3945_disable_events - Disable selected events in uCode event log
- *
- * Disable an event by writing "1"s into "disable"
- * bitmap in SRAM. Bit position corresponds to Event # (id/type).
- * Default values of 0 enable uCode events to be logged.
- * Use for only special debugging. This function is just a placeholder as-is,
- * you'll need to provide the special bits! ...
- * ... and set IWL_EVT_DISABLE to 1. */
-void iwl3945_disable_events(struct iwl_priv *priv)
-{
- int i;
- u32 base; /* SRAM address of event log header */
- u32 disable_ptr; /* SRAM address of event-disable bitmap array */
- u32 array_size; /* # of u32 entries in array */
- static const u32 evt_disable[IWL_EVT_DISABLE_SIZE] = {
- 0x00000000, /* 31 - 0 Event id numbers */
- 0x00000000, /* 63 - 32 */
- 0x00000000, /* 95 - 64 */
- 0x00000000, /* 127 - 96 */
- 0x00000000, /* 159 - 128 */
- 0x00000000, /* 191 - 160 */
- 0x00000000, /* 223 - 192 */
- 0x00000000, /* 255 - 224 */
- 0x00000000, /* 287 - 256 */
- 0x00000000, /* 319 - 288 */
- 0x00000000, /* 351 - 320 */
- 0x00000000, /* 383 - 352 */
- 0x00000000, /* 415 - 384 */
- 0x00000000, /* 447 - 416 */
- 0x00000000, /* 479 - 448 */
- 0x00000000, /* 511 - 480 */
- 0x00000000, /* 543 - 512 */
- 0x00000000, /* 575 - 544 */
- 0x00000000, /* 607 - 576 */
- 0x00000000, /* 639 - 608 */
- 0x00000000, /* 671 - 640 */
- 0x00000000, /* 703 - 672 */
- 0x00000000, /* 735 - 704 */
- 0x00000000, /* 767 - 736 */
- 0x00000000, /* 799 - 768 */
- 0x00000000, /* 831 - 800 */
- 0x00000000, /* 863 - 832 */
- 0x00000000, /* 895 - 864 */
- 0x00000000, /* 927 - 896 */
- 0x00000000, /* 959 - 928 */
- 0x00000000, /* 991 - 960 */
- 0x00000000, /* 1023 - 992 */
- 0x00000000, /* 1055 - 1024 */
- 0x00000000, /* 1087 - 1056 */
- 0x00000000, /* 1119 - 1088 */
- 0x00000000, /* 1151 - 1120 */
- 0x00000000, /* 1183 - 1152 */
- 0x00000000, /* 1215 - 1184 */
- 0x00000000, /* 1247 - 1216 */
- 0x00000000, /* 1279 - 1248 */
- 0x00000000, /* 1311 - 1280 */
- 0x00000000, /* 1343 - 1312 */
- 0x00000000, /* 1375 - 1344 */
- 0x00000000, /* 1407 - 1376 */
- 0x00000000, /* 1439 - 1408 */
- 0x00000000, /* 1471 - 1440 */
- 0x00000000, /* 1503 - 1472 */
- };
-
- base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
- if (!iwl3945_hw_valid_rtc_data_addr(base)) {
- IWL_ERR(priv, "Invalid event log pointer 0x%08X\n", base);
- return;
- }
-
- disable_ptr = iwl_read_targ_mem(priv, base + (4 * sizeof(u32)));
- array_size = iwl_read_targ_mem(priv, base + (5 * sizeof(u32)));
-
- if (IWL_EVT_DISABLE && (array_size == IWL_EVT_DISABLE_SIZE)) {
- IWL_DEBUG_INFO(priv, "Disabling selected uCode log events at 0x%x\n",
- disable_ptr);
- for (i = 0; i < IWL_EVT_DISABLE_SIZE; i++)
- iwl_write_targ_mem(priv,
- disable_ptr + (i * sizeof(u32)),
- evt_disable[i]);
-
- } else {
- IWL_DEBUG_INFO(priv, "Selected uCode log events may be disabled\n");
- IWL_DEBUG_INFO(priv, " by writing \"1\"s into disable bitmap\n");
- IWL_DEBUG_INFO(priv, " in SRAM at 0x%x, size %d u32s\n",
- disable_ptr, array_size);
- }
-
-}
-
-static int iwl3945_hwrate_to_plcp_idx(u8 plcp)
-{
- int idx;
-
- for (idx = 0; idx < IWL_RATE_COUNT_3945; idx++)
- if (iwl3945_rates[idx].plcp == plcp)
- return idx;
- return -1;
-}
-
-#ifdef CONFIG_IWLWIFI_DEBUG
-#define TX_STATUS_ENTRY(x) case TX_3945_STATUS_FAIL_ ## x: return #x
-
-static const char *iwl3945_get_tx_fail_reason(u32 status)
-{
- switch (status & TX_STATUS_MSK) {
- case TX_3945_STATUS_SUCCESS:
- return "SUCCESS";
- TX_STATUS_ENTRY(SHORT_LIMIT);
- TX_STATUS_ENTRY(LONG_LIMIT);
- TX_STATUS_ENTRY(FIFO_UNDERRUN);
- TX_STATUS_ENTRY(MGMNT_ABORT);
- TX_STATUS_ENTRY(NEXT_FRAG);
- TX_STATUS_ENTRY(LIFE_EXPIRE);
- TX_STATUS_ENTRY(DEST_PS);
- TX_STATUS_ENTRY(ABORTED);
- TX_STATUS_ENTRY(BT_RETRY);
- TX_STATUS_ENTRY(STA_INVALID);
- TX_STATUS_ENTRY(FRAG_DROPPED);
- TX_STATUS_ENTRY(TID_DISABLE);
- TX_STATUS_ENTRY(FRAME_FLUSHED);
- TX_STATUS_ENTRY(INSUFFICIENT_CF_POLL);
- TX_STATUS_ENTRY(TX_LOCKED);
- TX_STATUS_ENTRY(NO_BEACON_ON_RADAR);
- }
-
- return "UNKNOWN";
-}
-#else
-static inline const char *iwl3945_get_tx_fail_reason(u32 status)
-{
- return "";
-}
-#endif
-
-/*
- * get ieee prev rate from rate scale table.
- * for A and B mode we need to overright prev
- * value
- */
-int iwl3945_rs_next_rate(struct iwl_priv *priv, int rate)
-{
- int next_rate = iwl3945_get_prev_ieee_rate(rate);
-
- switch (priv->band) {
- case IEEE80211_BAND_5GHZ:
- if (rate == IWL_RATE_12M_INDEX)
- next_rate = IWL_RATE_9M_INDEX;
- else if (rate == IWL_RATE_6M_INDEX)
- next_rate = IWL_RATE_6M_INDEX;
- break;
- case IEEE80211_BAND_2GHZ:
- if (!(priv->_3945.sta_supp_rates & IWL_OFDM_RATES_MASK) &&
- iwl_is_associated(priv, IWL_RXON_CTX_BSS)) {
- if (rate == IWL_RATE_11M_INDEX)
- next_rate = IWL_RATE_5M_INDEX;
- }
- break;
-
- default:
- break;
- }
-
- return next_rate;
-}
-
-
-/**
- * iwl3945_tx_queue_reclaim - Reclaim Tx queue entries already Tx'd
- *
- * When FW advances 'R' index, all entries between old and new 'R' index
- * need to be reclaimed. As result, some free space forms. If there is
- * enough free space (> low mark), wake the stack that feeds us.
- */
-static void iwl3945_tx_queue_reclaim(struct iwl_priv *priv,
- int txq_id, int index)
-{
- struct iwl_tx_queue *txq = &priv->txq[txq_id];
- struct iwl_queue *q = &txq->q;
- struct iwl_tx_info *tx_info;
-
- BUG_ON(txq_id == IWL39_CMD_QUEUE_NUM);
-
- for (index = iwl_queue_inc_wrap(index, q->n_bd); q->read_ptr != index;
- q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd)) {
-
- tx_info = &txq->txb[txq->q.read_ptr];
- ieee80211_tx_status_irqsafe(priv->hw, tx_info->skb);
- tx_info->skb = NULL;
- priv->cfg->ops->lib->txq_free_tfd(priv, txq);
- }
-
- if (iwl_queue_space(q) > q->low_mark && (txq_id >= 0) &&
- (txq_id != IWL39_CMD_QUEUE_NUM) &&
- priv->mac80211_registered)
- iwl_wake_queue(priv, txq);
-}
-
-/**
- * iwl3945_rx_reply_tx - Handle Tx response
- */
-static void iwl3945_rx_reply_tx(struct iwl_priv *priv,
- struct iwl_rx_mem_buffer *rxb)
-{
- struct iwl_rx_packet *pkt = rxb_addr(rxb);
- u16 sequence = le16_to_cpu(pkt->hdr.sequence);
- int txq_id = SEQ_TO_QUEUE(sequence);
- int index = SEQ_TO_INDEX(sequence);
- struct iwl_tx_queue *txq = &priv->txq[txq_id];
- struct ieee80211_tx_info *info;
- struct iwl3945_tx_resp *tx_resp = (void *)&pkt->u.raw[0];
- u32 status = le32_to_cpu(tx_resp->status);
- int rate_idx;
- int fail;
-
- if ((index >= txq->q.n_bd) || (iwl_queue_used(&txq->q, index) == 0)) {
- IWL_ERR(priv, "Read index for DMA queue txq_id (%d) index %d "
- "is out of range [0-%d] %d %d\n", txq_id,
- index, txq->q.n_bd, txq->q.write_ptr,
- txq->q.read_ptr);
- return;
- }
-
- txq->time_stamp = jiffies;
- info = IEEE80211_SKB_CB(txq->txb[txq->q.read_ptr].skb);
- ieee80211_tx_info_clear_status(info);
-
- /* Fill the MRR chain with some info about on-chip retransmissions */
- rate_idx = iwl3945_hwrate_to_plcp_idx(tx_resp->rate);
- if (info->band == IEEE80211_BAND_5GHZ)
- rate_idx -= IWL_FIRST_OFDM_RATE;
-
- fail = tx_resp->failure_frame;
-
- info->status.rates[0].idx = rate_idx;
- info->status.rates[0].count = fail + 1; /* add final attempt */
-
- /* tx_status->rts_retry_count = tx_resp->failure_rts; */
- info->flags |= ((status & TX_STATUS_MSK) == TX_STATUS_SUCCESS) ?
- IEEE80211_TX_STAT_ACK : 0;
-
- IWL_DEBUG_TX(priv, "Tx queue %d Status %s (0x%08x) plcp rate %d retries %d\n",
- txq_id, iwl3945_get_tx_fail_reason(status), status,
- tx_resp->rate, tx_resp->failure_frame);
-
- IWL_DEBUG_TX_REPLY(priv, "Tx queue reclaim %d\n", index);
- iwl3945_tx_queue_reclaim(priv, txq_id, index);
-
- if (status & TX_ABORT_REQUIRED_MSK)
- IWL_ERR(priv, "TODO: Implement Tx ABORT REQUIRED!!!\n");
-}
-
-
-
-/*****************************************************************************
- *
- * Intel PRO/Wireless 3945ABG/BG Network Connection
- *
- * RX handler implementations
- *
- *****************************************************************************/
-#ifdef CONFIG_IWLWIFI_DEBUGFS
-/*
- * based on the assumption of all statistics counter are in DWORD
- * FIXME: This function is for debugging, do not deal with
- * the case of counters roll-over.
- */
-static void iwl3945_accumulative_statistics(struct iwl_priv *priv,
- __le32 *stats)
-{
- int i;
- __le32 *prev_stats;
- u32 *accum_stats;
- u32 *delta, *max_delta;
-
- prev_stats = (__le32 *)&priv->_3945.statistics;
- accum_stats = (u32 *)&priv->_3945.accum_statistics;
- delta = (u32 *)&priv->_3945.delta_statistics;
- max_delta = (u32 *)&priv->_3945.max_delta;
-
- for (i = sizeof(__le32); i < sizeof(struct iwl3945_notif_statistics);
- i += sizeof(__le32), stats++, prev_stats++, delta++,
- max_delta++, accum_stats++) {
- if (le32_to_cpu(*stats) > le32_to_cpu(*prev_stats)) {
- *delta = (le32_to_cpu(*stats) -
- le32_to_cpu(*prev_stats));
- *accum_stats += *delta;
- if (*delta > *max_delta)
- *max_delta = *delta;
- }
- }
-
- /* reset accumulative statistics for "no-counter" type statistics */
- priv->_3945.accum_statistics.general.temperature =
- priv->_3945.statistics.general.temperature;
- priv->_3945.accum_statistics.general.ttl_timestamp =
- priv->_3945.statistics.general.ttl_timestamp;
-}
-#endif
-
-/**
- * iwl3945_good_plcp_health - checks for plcp error.
- *
- * When the plcp error is exceeding the thresholds, reset the radio
- * to improve the throughput.
- */
-static bool iwl3945_good_plcp_health(struct iwl_priv *priv,
- struct iwl_rx_packet *pkt)
-{
- bool rc = true;
- struct iwl3945_notif_statistics current_stat;
- int combined_plcp_delta;
- unsigned int plcp_msec;
- unsigned long plcp_received_jiffies;
-
- if (priv->cfg->base_params->plcp_delta_threshold ==
- IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE) {
- IWL_DEBUG_RADIO(priv, "plcp_err check disabled\n");
- return rc;
- }
- memcpy(¤t_stat, pkt->u.raw, sizeof(struct
- iwl3945_notif_statistics));
- /*
- * check for plcp_err and trigger radio reset if it exceeds
- * the plcp error threshold plcp_delta.
- */
- plcp_received_jiffies = jiffies;
- plcp_msec = jiffies_to_msecs((long) plcp_received_jiffies -
- (long) priv->plcp_jiffies);
- priv->plcp_jiffies = plcp_received_jiffies;
- /*
- * check to make sure plcp_msec is not 0 to prevent division
- * by zero.
- */
- if (plcp_msec) {
- combined_plcp_delta =
- (le32_to_cpu(current_stat.rx.ofdm.plcp_err) -
- le32_to_cpu(priv->_3945.statistics.rx.ofdm.plcp_err));
-
- if ((combined_plcp_delta > 0) &&
- ((combined_plcp_delta * 100) / plcp_msec) >
- priv->cfg->base_params->plcp_delta_threshold) {
- /*
- * if plcp_err exceed the threshold, the following
- * data is printed in csv format:
- * Text: plcp_err exceeded %d,
- * Received ofdm.plcp_err,
- * Current ofdm.plcp_err,
- * combined_plcp_delta,
- * plcp_msec
- */
- IWL_DEBUG_RADIO(priv, "plcp_err exceeded %u, "
- "%u, %d, %u mSecs\n",
- priv->cfg->base_params->plcp_delta_threshold,
- le32_to_cpu(current_stat.rx.ofdm.plcp_err),
- combined_plcp_delta, plcp_msec);
- /*
- * Reset the RF radio due to the high plcp
- * error rate
- */
- rc = false;
- }
- }
- return rc;
-}
-
-void iwl3945_hw_rx_statistics(struct iwl_priv *priv,
- struct iwl_rx_mem_buffer *rxb)
-{
- struct iwl_rx_packet *pkt = rxb_addr(rxb);
-
- IWL_DEBUG_RX(priv, "Statistics notification received (%d vs %d).\n",
- (int)sizeof(struct iwl3945_notif_statistics),
- le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK);
-#ifdef CONFIG_IWLWIFI_DEBUGFS
- iwl3945_accumulative_statistics(priv, (__le32 *)&pkt->u.raw);
-#endif
- iwl_recover_from_statistics(priv, pkt);
-
- memcpy(&priv->_3945.statistics, pkt->u.raw, sizeof(priv->_3945.statistics));
-}
-
-void iwl3945_reply_statistics(struct iwl_priv *priv,
- struct iwl_rx_mem_buffer *rxb)
-{
- struct iwl_rx_packet *pkt = rxb_addr(rxb);
- __le32 *flag = (__le32 *)&pkt->u.raw;
-
- if (le32_to_cpu(*flag) & UCODE_STATISTICS_CLEAR_MSK) {
-#ifdef CONFIG_IWLWIFI_DEBUGFS
- memset(&priv->_3945.accum_statistics, 0,
- sizeof(struct iwl3945_notif_statistics));
- memset(&priv->_3945.delta_statistics, 0,
- sizeof(struct iwl3945_notif_statistics));
- memset(&priv->_3945.max_delta, 0,
- sizeof(struct iwl3945_notif_statistics));
-#endif
- IWL_DEBUG_RX(priv, "Statistics have been cleared\n");
- }
- iwl3945_hw_rx_statistics(priv, rxb);
-}
-
-
-/******************************************************************************
- *
- * Misc. internal state and helper functions
- *
- ******************************************************************************/
-
-/* This is necessary only for a number of statistics, see the caller. */
-static int iwl3945_is_network_packet(struct iwl_priv *priv,
- struct ieee80211_hdr *header)
-{
- /* Filter incoming packets to determine if they are targeted toward
- * this network, discarding packets coming from ourselves */
- switch (priv->iw_mode) {
- case NL80211_IFTYPE_ADHOC: /* Header: Dest. | Source | BSSID */
- /* packets to our IBSS update information */
- return !compare_ether_addr(header->addr3, priv->bssid);
- case NL80211_IFTYPE_STATION: /* Header: Dest. | AP{BSSID} | Source */
- /* packets to our IBSS update information */
- return !compare_ether_addr(header->addr2, priv->bssid);
- default:
- return 1;
- }
-}
-
-static void iwl3945_pass_packet_to_mac80211(struct iwl_priv *priv,
- struct iwl_rx_mem_buffer *rxb,
- struct ieee80211_rx_status *stats)
-{
- struct iwl_rx_packet *pkt = rxb_addr(rxb);
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)IWL_RX_DATA(pkt);
- struct iwl3945_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt);
- struct iwl3945_rx_frame_end *rx_end = IWL_RX_END(pkt);
- u16 len = le16_to_cpu(rx_hdr->len);
- struct sk_buff *skb;
- __le16 fc = hdr->frame_control;
-
- /* We received data from the HW, so stop the watchdog */
- if (unlikely(len + IWL39_RX_FRAME_SIZE >
- PAGE_SIZE << priv->hw_params.rx_page_order)) {
- IWL_DEBUG_DROP(priv, "Corruption detected!\n");
- return;
- }
-
- /* We only process data packets if the interface is open */
- if (unlikely(!priv->is_open)) {
- IWL_DEBUG_DROP_LIMIT(priv,
- "Dropping packet while interface is not open.\n");
- return;
- }
-
- skb = dev_alloc_skb(128);
- if (!skb) {
- IWL_ERR(priv, "dev_alloc_skb failed\n");
- return;
- }
-
- if (!iwl3945_mod_params.sw_crypto)
- iwl_set_decrypted_flag(priv,
- (struct ieee80211_hdr *)rxb_addr(rxb),
- le32_to_cpu(rx_end->status), stats);
-
- skb_add_rx_frag(skb, 0, rxb->page,
- (void *)rx_hdr->payload - (void *)pkt, len);
-
- iwl_update_stats(priv, false, fc, len);
- memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats));
-
- ieee80211_rx(priv->hw, skb);
- priv->alloc_rxb_page--;
- rxb->page = NULL;
-}
-
-#define IWL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6)
-
-static void iwl3945_rx_reply_rx(struct iwl_priv *priv,
- struct iwl_rx_mem_buffer *rxb)
-{
- struct ieee80211_hdr *header;
- struct ieee80211_rx_status rx_status;
- struct iwl_rx_packet *pkt = rxb_addr(rxb);
- struct iwl3945_rx_frame_stats *rx_stats = IWL_RX_STATS(pkt);
- struct iwl3945_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt);
- struct iwl3945_rx_frame_end *rx_end = IWL_RX_END(pkt);
- u16 rx_stats_sig_avg __maybe_unused = le16_to_cpu(rx_stats->sig_avg);
- u16 rx_stats_noise_diff __maybe_unused = le16_to_cpu(rx_stats->noise_diff);
- u8 network_packet;
-
- rx_status.flag = 0;
- rx_status.mactime = le64_to_cpu(rx_end->timestamp);
- rx_status.band = (rx_hdr->phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ?
- IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ;
- rx_status.freq =
- ieee80211_channel_to_frequency(le16_to_cpu(rx_hdr->channel),
- rx_status.band);
-
- rx_status.rate_idx = iwl3945_hwrate_to_plcp_idx(rx_hdr->rate);
- if (rx_status.band == IEEE80211_BAND_5GHZ)
- rx_status.rate_idx -= IWL_FIRST_OFDM_RATE;
-
- rx_status.antenna = (le16_to_cpu(rx_hdr->phy_flags) &
- RX_RES_PHY_FLAGS_ANTENNA_MSK) >> 4;
-
- /* set the preamble flag if appropriate */
- if (rx_hdr->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK)
- rx_status.flag |= RX_FLAG_SHORTPRE;
-
- if ((unlikely(rx_stats->phy_count > 20))) {
- IWL_DEBUG_DROP(priv, "dsp size out of range [0,20]: %d/n",
- rx_stats->phy_count);
- return;
- }
-
- if (!(rx_end->status & RX_RES_STATUS_NO_CRC32_ERROR)
- || !(rx_end->status & RX_RES_STATUS_NO_RXE_OVERFLOW)) {
- IWL_DEBUG_RX(priv, "Bad CRC or FIFO: 0x%08X.\n", rx_end->status);
- return;
- }
-
-
-
- /* Convert 3945's rssi indicator to dBm */
- rx_status.signal = rx_stats->rssi - IWL39_RSSI_OFFSET;
-
- IWL_DEBUG_STATS(priv, "Rssi %d sig_avg %d noise_diff %d\n",
- rx_status.signal, rx_stats_sig_avg,
- rx_stats_noise_diff);
-
- header = (struct ieee80211_hdr *)IWL_RX_DATA(pkt);
-
- network_packet = iwl3945_is_network_packet(priv, header);
-
- IWL_DEBUG_STATS_LIMIT(priv, "[%c] %d RSSI:%d Signal:%u, Rate:%u\n",
- network_packet ? '*' : ' ',
- le16_to_cpu(rx_hdr->channel),
- rx_status.signal, rx_status.signal,
- rx_status.rate_idx);
-
- iwl_dbg_log_rx_data_frame(priv, le16_to_cpu(rx_hdr->len), header);
-
- if (network_packet) {
- priv->_3945.last_beacon_time =
- le32_to_cpu(rx_end->beacon_timestamp);
- priv->_3945.last_tsf = le64_to_cpu(rx_end->timestamp);
- priv->_3945.last_rx_rssi = rx_status.signal;
- }
-
- iwl3945_pass_packet_to_mac80211(priv, rxb, &rx_status);
-}
-
-int iwl3945_hw_txq_attach_buf_to_tfd(struct iwl_priv *priv,
- struct iwl_tx_queue *txq,
- dma_addr_t addr, u16 len, u8 reset, u8 pad)
-{
- int count;
- struct iwl_queue *q;
- struct iwl3945_tfd *tfd, *tfd_tmp;
-
- q = &txq->q;
- tfd_tmp = (struct iwl3945_tfd *)txq->tfds;
- tfd = &tfd_tmp[q->write_ptr];
-
- if (reset)
- memset(tfd, 0, sizeof(*tfd));
-
- count = TFD_CTL_COUNT_GET(le32_to_cpu(tfd->control_flags));
-
- if ((count >= NUM_TFD_CHUNKS) || (count < 0)) {
- IWL_ERR(priv, "Error can not send more than %d chunks\n",
- NUM_TFD_CHUNKS);
- return -EINVAL;
- }
-
- tfd->tbs[count].addr = cpu_to_le32(addr);
- tfd->tbs[count].len = cpu_to_le32(len);
-
- count++;
-
- tfd->control_flags = cpu_to_le32(TFD_CTL_COUNT_SET(count) |
- TFD_CTL_PAD_SET(pad));
-
- return 0;
-}
-
-/**
- * iwl3945_hw_txq_free_tfd - Free one TFD, those at index [txq->q.read_ptr]
- *
- * Does NOT advance any indexes
- */
-void iwl3945_hw_txq_free_tfd(struct iwl_priv *priv, struct iwl_tx_queue *txq)
-{
- struct iwl3945_tfd *tfd_tmp = (struct iwl3945_tfd *)txq->tfds;
- int index = txq->q.read_ptr;
- struct iwl3945_tfd *tfd = &tfd_tmp[index];
- struct pci_dev *dev = priv->pci_dev;
- int i;
- int counter;
-
- /* sanity check */
- counter = TFD_CTL_COUNT_GET(le32_to_cpu(tfd->control_flags));
- if (counter > NUM_TFD_CHUNKS) {
- IWL_ERR(priv, "Too many chunks: %i\n", counter);
- /* @todo issue fatal error, it is quite serious situation */
- return;
- }
-
- /* Unmap tx_cmd */
- if (counter)
- pci_unmap_single(dev,
- dma_unmap_addr(&txq->meta[index], mapping),
- dma_unmap_len(&txq->meta[index], len),
- PCI_DMA_TODEVICE);
-
- /* unmap chunks if any */
-
- for (i = 1; i < counter; i++)
- pci_unmap_single(dev, le32_to_cpu(tfd->tbs[i].addr),
- le32_to_cpu(tfd->tbs[i].len), PCI_DMA_TODEVICE);
-
- /* free SKB */
- if (txq->txb) {
- struct sk_buff *skb;
-
- skb = txq->txb[txq->q.read_ptr].skb;
-
- /* can be called from irqs-disabled context */
- if (skb) {
- dev_kfree_skb_any(skb);
- txq->txb[txq->q.read_ptr].skb = NULL;
- }
- }
-}
-
-/**
- * iwl3945_hw_build_tx_cmd_rate - Add rate portion to TX_CMD:
- *
-*/
-void iwl3945_hw_build_tx_cmd_rate(struct iwl_priv *priv,
- struct iwl_device_cmd *cmd,
- struct ieee80211_tx_info *info,
- struct ieee80211_hdr *hdr,
- int sta_id, int tx_id)
-{
- u16 hw_value = ieee80211_get_tx_rate(priv->hw, info)->hw_value;
- u16 rate_index = min(hw_value & 0xffff, IWL_RATE_COUNT_3945);
- u16 rate_mask;
- int rate;
- u8 rts_retry_limit;
- u8 data_retry_limit;
- __le32 tx_flags;
- __le16 fc = hdr->frame_control;
- struct iwl3945_tx_cmd *tx_cmd = (struct iwl3945_tx_cmd *)cmd->cmd.payload;
-
- rate = iwl3945_rates[rate_index].plcp;
- tx_flags = tx_cmd->tx_flags;
-
- /* We need to figure out how to get the sta->supp_rates while
- * in this running context */
- rate_mask = IWL_RATES_MASK_3945;
-
- /* Set retry limit on DATA packets and Probe Responses*/
- if (ieee80211_is_probe_resp(fc))
- data_retry_limit = 3;
- else
- data_retry_limit = IWL_DEFAULT_TX_RETRY;
- tx_cmd->data_retry_limit = data_retry_limit;
-
- if (tx_id >= IWL39_CMD_QUEUE_NUM)
- rts_retry_limit = 3;
- else
- rts_retry_limit = 7;
-
- if (data_retry_limit < rts_retry_limit)
- rts_retry_limit = data_retry_limit;
- tx_cmd->rts_retry_limit = rts_retry_limit;
-
- tx_cmd->rate = rate;
- tx_cmd->tx_flags = tx_flags;
-
- /* OFDM */
- tx_cmd->supp_rates[0] =
- ((rate_mask & IWL_OFDM_RATES_MASK) >> IWL_FIRST_OFDM_RATE) & 0xFF;
-
- /* CCK */
- tx_cmd->supp_rates[1] = (rate_mask & 0xF);
-
- IWL_DEBUG_RATE(priv, "Tx sta id: %d, rate: %d (plcp), flags: 0x%4X "
- "cck/ofdm mask: 0x%x/0x%x\n", sta_id,
- tx_cmd->rate, le32_to_cpu(tx_cmd->tx_flags),
- tx_cmd->supp_rates[1], tx_cmd->supp_rates[0]);
-}
-
-static u8 iwl3945_sync_sta(struct iwl_priv *priv, int sta_id, u16 tx_rate)
-{
- unsigned long flags_spin;
- struct iwl_station_entry *station;
-
- if (sta_id == IWL_INVALID_STATION)
- return IWL_INVALID_STATION;
-
- spin_lock_irqsave(&priv->sta_lock, flags_spin);
- station = &priv->stations[sta_id];
-
- station->sta.sta.modify_mask = STA_MODIFY_TX_RATE_MSK;
- station->sta.rate_n_flags = cpu_to_le16(tx_rate);
- station->sta.mode = STA_CONTROL_MODIFY_MSK;
- iwl_send_add_sta(priv, &station->sta, CMD_ASYNC);
- spin_unlock_irqrestore(&priv->sta_lock, flags_spin);
-
- IWL_DEBUG_RATE(priv, "SCALE sync station %d to rate %d\n",
- sta_id, tx_rate);
- return sta_id;
-}
-
-static void iwl3945_set_pwr_vmain(struct iwl_priv *priv)
-{
-/*
- * (for documentation purposes)
- * to set power to V_AUX, do
-
- if (pci_pme_capable(priv->pci_dev, PCI_D3cold)) {
- iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
- APMG_PS_CTRL_VAL_PWR_SRC_VAUX,
- ~APMG_PS_CTRL_MSK_PWR_SRC);
-
- iwl_poll_bit(priv, CSR_GPIO_IN,
- CSR_GPIO_IN_VAL_VAUX_PWR_SRC,
- CSR_GPIO_IN_BIT_AUX_POWER, 5000);
- }
- */
-
- iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
- APMG_PS_CTRL_VAL_PWR_SRC_VMAIN,
- ~APMG_PS_CTRL_MSK_PWR_SRC);
-
- iwl_poll_bit(priv, CSR_GPIO_IN, CSR_GPIO_IN_VAL_VMAIN_PWR_SRC,
- CSR_GPIO_IN_BIT_AUX_POWER, 5000); /* uS */
-}
-
-static int iwl3945_rx_init(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
-{
- iwl_write_direct32(priv, FH39_RCSR_RBD_BASE(0), rxq->bd_dma);
- iwl_write_direct32(priv, FH39_RCSR_RPTR_ADDR(0), rxq->rb_stts_dma);
- iwl_write_direct32(priv, FH39_RCSR_WPTR(0), 0);
- iwl_write_direct32(priv, FH39_RCSR_CONFIG(0),
- FH39_RCSR_RX_CONFIG_REG_VAL_DMA_CHNL_EN_ENABLE |
- FH39_RCSR_RX_CONFIG_REG_VAL_RDRBD_EN_ENABLE |
- FH39_RCSR_RX_CONFIG_REG_BIT_WR_STTS_EN |
- FH39_RCSR_RX_CONFIG_REG_VAL_MAX_FRAG_SIZE_128 |
- (RX_QUEUE_SIZE_LOG << FH39_RCSR_RX_CONFIG_REG_POS_RBDC_SIZE) |
- FH39_RCSR_RX_CONFIG_REG_VAL_IRQ_DEST_INT_HOST |
- (1 << FH39_RCSR_RX_CONFIG_REG_POS_IRQ_RBTH) |
- FH39_RCSR_RX_CONFIG_REG_VAL_MSG_MODE_FH);
-
- /* fake read to flush all prev I/O */
- iwl_read_direct32(priv, FH39_RSSR_CTRL);
-
- return 0;
-}
-
-static int iwl3945_tx_reset(struct iwl_priv *priv)
-{
-
- /* bypass mode */
- iwl_write_prph(priv, ALM_SCD_MODE_REG, 0x2);
-
- /* RA 0 is active */
- iwl_write_prph(priv, ALM_SCD_ARASTAT_REG, 0x01);
-
- /* all 6 fifo are active */
- iwl_write_prph(priv, ALM_SCD_TXFACT_REG, 0x3f);
-
- iwl_write_prph(priv, ALM_SCD_SBYP_MODE_1_REG, 0x010000);
- iwl_write_prph(priv, ALM_SCD_SBYP_MODE_2_REG, 0x030002);
- iwl_write_prph(priv, ALM_SCD_TXF4MF_REG, 0x000004);
- iwl_write_prph(priv, ALM_SCD_TXF5MF_REG, 0x000005);
-
- iwl_write_direct32(priv, FH39_TSSR_CBB_BASE,
- priv->_3945.shared_phys);
-
- iwl_write_direct32(priv, FH39_TSSR_MSG_CONFIG,
- FH39_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TXPD_ON |
- FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_TXPD_ON |
- FH39_TSSR_TX_MSG_CONFIG_REG_VAL_MAX_FRAG_SIZE_128B |
- FH39_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TFD_ON |
- FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_CBB_ON |
- FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RSP_WAIT_TH |
- FH39_TSSR_TX_MSG_CONFIG_REG_VAL_RSP_WAIT_TH);
-
-
- return 0;
-}
-
-/**
- * iwl3945_txq_ctx_reset - Reset TX queue context
- *
- * Destroys all DMA structures and initialize them again
- */
-static int iwl3945_txq_ctx_reset(struct iwl_priv *priv)
-{
- int rc;
- int txq_id, slots_num;
-
- iwl3945_hw_txq_ctx_free(priv);
-
- /* allocate tx queue structure */
- rc = iwl_alloc_txq_mem(priv);
- if (rc)
- return rc;
-
- /* Tx CMD queue */
- rc = iwl3945_tx_reset(priv);
- if (rc)
- goto error;
-
- /* Tx queue(s) */
- for (txq_id = 0; txq_id < priv->hw_params.max_txq_num; txq_id++) {
- slots_num = (txq_id == IWL39_CMD_QUEUE_NUM) ?
- TFD_CMD_SLOTS : TFD_TX_CMD_SLOTS;
- rc = iwl_tx_queue_init(priv, &priv->txq[txq_id], slots_num,
- txq_id);
- if (rc) {
- IWL_ERR(priv, "Tx %d queue init failed\n", txq_id);
- goto error;
- }
- }
-
- return rc;
-
- error:
- iwl3945_hw_txq_ctx_free(priv);
- return rc;
-}
-
-
-/*
- * Start up 3945's basic functionality after it has been reset
- * (e.g. after platform boot, or shutdown via iwl_apm_stop())
- * NOTE: This does not load uCode nor start the embedded processor
- */
-static int iwl3945_apm_init(struct iwl_priv *priv)
-{
- int ret = iwl_apm_init(priv);
-
- /* Clear APMG (NIC's internal power management) interrupts */
- iwl_write_prph(priv, APMG_RTC_INT_MSK_REG, 0x0);
- iwl_write_prph(priv, APMG_RTC_INT_STT_REG, 0xFFFFFFFF);
-
- /* Reset radio chip */
- iwl_set_bits_prph(priv, APMG_PS_CTRL_REG, APMG_PS_CTRL_VAL_RESET_REQ);
- udelay(5);
- iwl_clear_bits_prph(priv, APMG_PS_CTRL_REG, APMG_PS_CTRL_VAL_RESET_REQ);
-
- return ret;
-}
-
-static void iwl3945_nic_config(struct iwl_priv *priv)
-{
- struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom;
- unsigned long flags;
- u8 rev_id = 0;
-
- spin_lock_irqsave(&priv->lock, flags);
-
- /* Determine HW type */
- pci_read_config_byte(priv->pci_dev, PCI_REVISION_ID, &rev_id);
-
- IWL_DEBUG_INFO(priv, "HW Revision ID = 0x%X\n", rev_id);
-
- if (rev_id & PCI_CFG_REV_ID_BIT_RTP)
- IWL_DEBUG_INFO(priv, "RTP type\n");
- else if (rev_id & PCI_CFG_REV_ID_BIT_BASIC_SKU) {
- IWL_DEBUG_INFO(priv, "3945 RADIO-MB type\n");
- iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
- CSR39_HW_IF_CONFIG_REG_BIT_3945_MB);
- } else {
- IWL_DEBUG_INFO(priv, "3945 RADIO-MM type\n");
- iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
- CSR39_HW_IF_CONFIG_REG_BIT_3945_MM);
- }
-
- if (EEPROM_SKU_CAP_OP_MODE_MRC == eeprom->sku_cap) {
- IWL_DEBUG_INFO(priv, "SKU OP mode is mrc\n");
- iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
- CSR39_HW_IF_CONFIG_REG_BIT_SKU_MRC);
- } else
- IWL_DEBUG_INFO(priv, "SKU OP mode is basic\n");
-
- if ((eeprom->board_revision & 0xF0) == 0xD0) {
- IWL_DEBUG_INFO(priv, "3945ABG revision is 0x%X\n",
- eeprom->board_revision);
- iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
- CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE);
- } else {
- IWL_DEBUG_INFO(priv, "3945ABG revision is 0x%X\n",
- eeprom->board_revision);
- iwl_clear_bit(priv, CSR_HW_IF_CONFIG_REG,
- CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE);
- }
-
- if (eeprom->almgor_m_version <= 1) {
- iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
- CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_A);
- IWL_DEBUG_INFO(priv, "Card M type A version is 0x%X\n",
- eeprom->almgor_m_version);
- } else {
- IWL_DEBUG_INFO(priv, "Card M type B version is 0x%X\n",
- eeprom->almgor_m_version);
- iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
- CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_B);
- }
- spin_unlock_irqrestore(&priv->lock, flags);
-
- if (eeprom->sku_cap & EEPROM_SKU_CAP_SW_RF_KILL_ENABLE)
- IWL_DEBUG_RF_KILL(priv, "SW RF KILL supported in EEPROM.\n");
-
- if (eeprom->sku_cap & EEPROM_SKU_CAP_HW_RF_KILL_ENABLE)
- IWL_DEBUG_RF_KILL(priv, "HW RF KILL supported in EEPROM.\n");
-}
-
-int iwl3945_hw_nic_init(struct iwl_priv *priv)
-{
- int rc;
- unsigned long flags;
- struct iwl_rx_queue *rxq = &priv->rxq;
-
- spin_lock_irqsave(&priv->lock, flags);
- priv->cfg->ops->lib->apm_ops.init(priv);
- spin_unlock_irqrestore(&priv->lock, flags);
-
- iwl3945_set_pwr_vmain(priv);
-
- priv->cfg->ops->lib->apm_ops.config(priv);
-
- /* Allocate the RX queue, or reset if it is already allocated */
- if (!rxq->bd) {
- rc = iwl_rx_queue_alloc(priv);
- if (rc) {
- IWL_ERR(priv, "Unable to initialize Rx queue\n");
- return -ENOMEM;
- }
- } else
- iwl3945_rx_queue_reset(priv, rxq);
-
- iwl3945_rx_replenish(priv);
-
- iwl3945_rx_init(priv, rxq);
-
-
- /* Look at using this instead:
- rxq->need_update = 1;
- iwl_rx_queue_update_write_ptr(priv, rxq);
- */
-
- iwl_write_direct32(priv, FH39_RCSR_WPTR(0), rxq->write & ~7);
-
- rc = iwl3945_txq_ctx_reset(priv);
- if (rc)
- return rc;
-
- set_bit(STATUS_INIT, &priv->status);
-
- return 0;
-}
-
-/**
- * iwl3945_hw_txq_ctx_free - Free TXQ Context
- *
- * Destroy all TX DMA queues and structures
- */
-void iwl3945_hw_txq_ctx_free(struct iwl_priv *priv)
-{
- int txq_id;
-
- /* Tx queues */
- if (priv->txq)
- for (txq_id = 0; txq_id < priv->hw_params.max_txq_num;
- txq_id++)
- if (txq_id == IWL39_CMD_QUEUE_NUM)
- iwl_cmd_queue_free(priv);
- else
- iwl_tx_queue_free(priv, txq_id);
-
- /* free tx queue structure */
- iwl_free_txq_mem(priv);
-}
-
-void iwl3945_hw_txq_ctx_stop(struct iwl_priv *priv)
-{
- int txq_id;
-
- /* stop SCD */
- iwl_write_prph(priv, ALM_SCD_MODE_REG, 0);
- iwl_write_prph(priv, ALM_SCD_TXFACT_REG, 0);
-
- /* reset TFD queues */
- for (txq_id = 0; txq_id < priv->hw_params.max_txq_num; txq_id++) {
- iwl_write_direct32(priv, FH39_TCSR_CONFIG(txq_id), 0x0);
- iwl_poll_direct_bit(priv, FH39_TSSR_TX_STATUS,
- FH39_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(txq_id),
- 1000);
- }
-
- iwl3945_hw_txq_ctx_free(priv);
-}
-
-/**
- * iwl3945_hw_reg_adjust_power_by_temp
- * return index delta into power gain settings table
-*/
-static int iwl3945_hw_reg_adjust_power_by_temp(int new_reading, int old_reading)
-{
- return (new_reading - old_reading) * (-11) / 100;
-}
-
-/**
- * iwl3945_hw_reg_temp_out_of_range - Keep temperature in sane range
- */
-static inline int iwl3945_hw_reg_temp_out_of_range(int temperature)
-{
- return ((temperature < -260) || (temperature > 25)) ? 1 : 0;
-}
-
-int iwl3945_hw_get_temperature(struct iwl_priv *priv)
-{
- return iwl_read32(priv, CSR_UCODE_DRV_GP2);
-}
-
-/**
- * iwl3945_hw_reg_txpower_get_temperature
- * get the current temperature by reading from NIC
-*/
-static int iwl3945_hw_reg_txpower_get_temperature(struct iwl_priv *priv)
-{
- struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom;
- int temperature;
-
- temperature = iwl3945_hw_get_temperature(priv);
-
- /* driver's okay range is -260 to +25.
- * human readable okay range is 0 to +285 */
- IWL_DEBUG_INFO(priv, "Temperature: %d\n", temperature + IWL_TEMP_CONVERT);
-
- /* handle insane temp reading */
- if (iwl3945_hw_reg_temp_out_of_range(temperature)) {
- IWL_ERR(priv, "Error bad temperature value %d\n", temperature);
-
- /* if really really hot(?),
- * substitute the 3rd band/group's temp measured at factory */
- if (priv->last_temperature > 100)
- temperature = eeprom->groups[2].temperature;
- else /* else use most recent "sane" value from driver */
- temperature = priv->last_temperature;
- }
-
- return temperature; /* raw, not "human readable" */
-}
-
-/* Adjust Txpower only if temperature variance is greater than threshold.
- *
- * Both are lower than older versions' 9 degrees */
-#define IWL_TEMPERATURE_LIMIT_TIMER 6
-
-/**
- * is_temp_calib_needed - determines if new calibration is needed
- *
- * records new temperature in tx_mgr->temperature.
- * replaces tx_mgr->last_temperature *only* if calib needed
- * (assumes caller will actually do the calibration!). */
-static int is_temp_calib_needed(struct iwl_priv *priv)
-{
- int temp_diff;
-
- priv->temperature = iwl3945_hw_reg_txpower_get_temperature(priv);
- temp_diff = priv->temperature - priv->last_temperature;
-
- /* get absolute value */
- if (temp_diff < 0) {
- IWL_DEBUG_POWER(priv, "Getting cooler, delta %d,\n", temp_diff);
- temp_diff = -temp_diff;
- } else if (temp_diff == 0)
- IWL_DEBUG_POWER(priv, "Same temp,\n");
- else
- IWL_DEBUG_POWER(priv, "Getting warmer, delta %d,\n", temp_diff);
-
- /* if we don't need calibration, *don't* update last_temperature */
- if (temp_diff < IWL_TEMPERATURE_LIMIT_TIMER) {
- IWL_DEBUG_POWER(priv, "Timed thermal calib not needed\n");
- return 0;
- }
-
- IWL_DEBUG_POWER(priv, "Timed thermal calib needed\n");
-
- /* assume that caller will actually do calib ...
- * update the "last temperature" value */
- priv->last_temperature = priv->temperature;
- return 1;
-}
-
-#define IWL_MAX_GAIN_ENTRIES 78
-#define IWL_CCK_FROM_OFDM_POWER_DIFF -5
-#define IWL_CCK_FROM_OFDM_INDEX_DIFF (10)
-
-/* radio and DSP power table, each step is 1/2 dB.
- * 1st number is for RF analog gain, 2nd number is for DSP pre-DAC gain. */
-static struct iwl3945_tx_power power_gain_table[2][IWL_MAX_GAIN_ENTRIES] = {
- {
- {251, 127}, /* 2.4 GHz, highest power */
- {251, 127},
- {251, 127},
- {251, 127},
- {251, 125},
- {251, 110},
- {251, 105},
- {251, 98},
- {187, 125},
- {187, 115},
- {187, 108},
- {187, 99},
- {243, 119},
- {243, 111},
- {243, 105},
- {243, 97},
- {243, 92},
- {211, 106},
- {211, 100},
- {179, 120},
- {179, 113},
- {179, 107},
- {147, 125},
- {147, 119},
- {147, 112},
- {147, 106},
- {147, 101},
- {147, 97},
- {147, 91},
- {115, 107},
- {235, 121},
- {235, 115},
- {235, 109},
- {203, 127},
- {203, 121},
- {203, 115},
- {203, 108},
- {203, 102},
- {203, 96},
- {203, 92},
- {171, 110},
- {171, 104},
- {171, 98},
- {139, 116},
- {227, 125},
- {227, 119},
- {227, 113},
- {227, 107},
- {227, 101},
- {227, 96},
- {195, 113},
- {195, 106},
- {195, 102},
- {195, 95},
- {163, 113},
- {163, 106},
- {163, 102},
- {163, 95},
- {131, 113},
- {131, 106},
- {131, 102},
- {131, 95},
- {99, 113},
- {99, 106},
- {99, 102},
- {99, 95},
- {67, 113},
- {67, 106},
- {67, 102},
- {67, 95},
- {35, 113},
- {35, 106},
- {35, 102},
- {35, 95},
- {3, 113},
- {3, 106},
- {3, 102},
- {3, 95} }, /* 2.4 GHz, lowest power */
- {
- {251, 127}, /* 5.x GHz, highest power */
- {251, 120},
- {251, 114},
- {219, 119},
- {219, 101},
- {187, 113},
- {187, 102},
- {155, 114},
- {155, 103},
- {123, 117},
- {123, 107},
- {123, 99},
- {123, 92},
- {91, 108},
- {59, 125},
- {59, 118},
- {59, 109},
- {59, 102},
- {59, 96},
- {59, 90},
- {27, 104},
- {27, 98},
- {27, 92},
- {115, 118},
- {115, 111},
- {115, 104},
- {83, 126},
- {83, 121},
- {83, 113},
- {83, 105},
- {83, 99},
- {51, 118},
- {51, 111},
- {51, 104},
- {51, 98},
- {19, 116},
- {19, 109},
- {19, 102},
- {19, 98},
- {19, 93},
- {171, 113},
- {171, 107},
- {171, 99},
- {139, 120},
- {139, 113},
- {139, 107},
- {139, 99},
- {107, 120},
- {107, 113},
- {107, 107},
- {107, 99},
- {75, 120},
- {75, 113},
- {75, 107},
- {75, 99},
- {43, 120},
- {43, 113},
- {43, 107},
- {43, 99},
- {11, 120},
- {11, 113},
- {11, 107},
- {11, 99},
- {131, 107},
- {131, 99},
- {99, 120},
- {99, 113},
- {99, 107},
- {99, 99},
- {67, 120},
- {67, 113},
- {67, 107},
- {67, 99},
- {35, 120},
- {35, 113},
- {35, 107},
- {35, 99},
- {3, 120} } /* 5.x GHz, lowest power */
-};
-
-static inline u8 iwl3945_hw_reg_fix_power_index(int index)
-{
- if (index < 0)
- return 0;
- if (index >= IWL_MAX_GAIN_ENTRIES)
- return IWL_MAX_GAIN_ENTRIES - 1;
- return (u8) index;
-}
-
-/* Kick off thermal recalibration check every 60 seconds */
-#define REG_RECALIB_PERIOD (60)
-
-/**
- * iwl3945_hw_reg_set_scan_power - Set Tx power for scan probe requests
- *
- * Set (in our channel info database) the direct scan Tx power for 1 Mbit (CCK)
- * or 6 Mbit (OFDM) rates.
- */
-static void iwl3945_hw_reg_set_scan_power(struct iwl_priv *priv, u32 scan_tbl_index,
- s32 rate_index, const s8 *clip_pwrs,
- struct iwl_channel_info *ch_info,
- int band_index)
-{
- struct iwl3945_scan_power_info *scan_power_info;
- s8 power;
- u8 power_index;
-
- scan_power_info = &ch_info->scan_pwr_info[scan_tbl_index];
-
- /* use this channel group's 6Mbit clipping/saturation pwr,
- * but cap at regulatory scan power restriction (set during init
- * based on eeprom channel data) for this channel. */
- power = min(ch_info->scan_power, clip_pwrs[IWL_RATE_6M_INDEX_TABLE]);
-
- /* further limit to user's max power preference.
- * FIXME: Other spectrum management power limitations do not
- * seem to apply?? */
- power = min(power, priv->tx_power_user_lmt);
- scan_power_info->requested_power = power;
-
- /* find difference between new scan *power* and current "normal"
- * Tx *power* for 6Mb. Use this difference (x2) to adjust the
- * current "normal" temperature-compensated Tx power *index* for
- * this rate (1Mb or 6Mb) to yield new temp-compensated scan power
- * *index*. */
- power_index = ch_info->power_info[rate_index].power_table_index
- - (power - ch_info->power_info
- [IWL_RATE_6M_INDEX_TABLE].requested_power) * 2;
-
- /* store reference index that we use when adjusting *all* scan
- * powers. So we can accommodate user (all channel) or spectrum
- * management (single channel) power changes "between" temperature
- * feedback compensation procedures.
- * don't force fit this reference index into gain table; it may be a
- * negative number. This will help avoid errors when we're at
- * the lower bounds (highest gains, for warmest temperatures)
- * of the table. */
-
- /* don't exceed table bounds for "real" setting */
- power_index = iwl3945_hw_reg_fix_power_index(power_index);
-
- scan_power_info->power_table_index = power_index;
- scan_power_info->tpc.tx_gain =
- power_gain_table[band_index][power_index].tx_gain;
- scan_power_info->tpc.dsp_atten =
- power_gain_table[band_index][power_index].dsp_atten;
-}
-
-/**
- * iwl3945_send_tx_power - fill in Tx Power command with gain settings
- *
- * Configures power settings for all rates for the current channel,
- * using values from channel info struct, and send to NIC
- */
-static int iwl3945_send_tx_power(struct iwl_priv *priv)
-{
- int rate_idx, i;
- const struct iwl_channel_info *ch_info = NULL;
- struct iwl3945_txpowertable_cmd txpower = {
- .channel = priv->contexts[IWL_RXON_CTX_BSS].active.channel,
- };
- u16 chan;
-
- if (WARN_ONCE(test_bit(STATUS_SCAN_HW, &priv->status),
- "TX Power requested while scanning!\n"))
- return -EAGAIN;
-
- chan = le16_to_cpu(priv->contexts[IWL_RXON_CTX_BSS].active.channel);
-
- txpower.band = (priv->band == IEEE80211_BAND_5GHZ) ? 0 : 1;
- ch_info = iwl_get_channel_info(priv, priv->band, chan);
- if (!ch_info) {
- IWL_ERR(priv,
- "Failed to get channel info for channel %d [%d]\n",
- chan, priv->band);
- return -EINVAL;
- }
-
- if (!is_channel_valid(ch_info)) {
- IWL_DEBUG_POWER(priv, "Not calling TX_PWR_TABLE_CMD on "
- "non-Tx channel.\n");
- return 0;
- }
-
- /* fill cmd with power settings for all rates for current channel */
- /* Fill OFDM rate */
- for (rate_idx = IWL_FIRST_OFDM_RATE, i = 0;
- rate_idx <= IWL39_LAST_OFDM_RATE; rate_idx++, i++) {
-
- txpower.power[i].tpc = ch_info->power_info[i].tpc;
- txpower.power[i].rate = iwl3945_rates[rate_idx].plcp;
-
- IWL_DEBUG_POWER(priv, "ch %d:%d rf %d dsp %3d rate code 0x%02x\n",
- le16_to_cpu(txpower.channel),
- txpower.band,
- txpower.power[i].tpc.tx_gain,
- txpower.power[i].tpc.dsp_atten,
- txpower.power[i].rate);
- }
- /* Fill CCK rates */
- for (rate_idx = IWL_FIRST_CCK_RATE;
- rate_idx <= IWL_LAST_CCK_RATE; rate_idx++, i++) {
- txpower.power[i].tpc = ch_info->power_info[i].tpc;
- txpower.power[i].rate = iwl3945_rates[rate_idx].plcp;
-
- IWL_DEBUG_POWER(priv, "ch %d:%d rf %d dsp %3d rate code 0x%02x\n",
- le16_to_cpu(txpower.channel),
- txpower.band,
- txpower.power[i].tpc.tx_gain,
- txpower.power[i].tpc.dsp_atten,
- txpower.power[i].rate);
- }
-
- return iwl_send_cmd_pdu(priv, REPLY_TX_PWR_TABLE_CMD,
- sizeof(struct iwl3945_txpowertable_cmd),
- &txpower);
-
-}
-
-/**
- * iwl3945_hw_reg_set_new_power - Configures power tables at new levels
- * @ch_info: Channel to update. Uses power_info.requested_power.
- *
- * Replace requested_power and base_power_index ch_info fields for
- * one channel.
- *
- * Called if user or spectrum management changes power preferences.
- * Takes into account h/w and modulation limitations (clip power).
- *
- * This does *not* send anything to NIC, just sets up ch_info for one channel.
- *
- * NOTE: reg_compensate_for_temperature_dif() *must* be run after this to
- * properly fill out the scan powers, and actual h/w gain settings,
- * and send changes to NIC
- */
-static int iwl3945_hw_reg_set_new_power(struct iwl_priv *priv,
- struct iwl_channel_info *ch_info)
-{
- struct iwl3945_channel_power_info *power_info;
- int power_changed = 0;
- int i;
- const s8 *clip_pwrs;
- int power;
-
- /* Get this chnlgrp's rate-to-max/clip-powers table */
- clip_pwrs = priv->_3945.clip_groups[ch_info->group_index].clip_powers;
-
- /* Get this channel's rate-to-current-power settings table */
- power_info = ch_info->power_info;
-
- /* update OFDM Txpower settings */
- for (i = IWL_RATE_6M_INDEX_TABLE; i <= IWL_RATE_54M_INDEX_TABLE;
- i++, ++power_info) {
- int delta_idx;
-
- /* limit new power to be no more than h/w capability */
- power = min(ch_info->curr_txpow, clip_pwrs[i]);
- if (power == power_info->requested_power)
- continue;
-
- /* find difference between old and new requested powers,
- * update base (non-temp-compensated) power index */
- delta_idx = (power - power_info->requested_power) * 2;
- power_info->base_power_index -= delta_idx;
-
- /* save new requested power value */
- power_info->requested_power = power;
-
- power_changed = 1;
- }
-
- /* update CCK Txpower settings, based on OFDM 12M setting ...
- * ... all CCK power settings for a given channel are the *same*. */
- if (power_changed) {
- power =
- ch_info->power_info[IWL_RATE_12M_INDEX_TABLE].
- requested_power + IWL_CCK_FROM_OFDM_POWER_DIFF;
-
- /* do all CCK rates' iwl3945_channel_power_info structures */
- for (i = IWL_RATE_1M_INDEX_TABLE; i <= IWL_RATE_11M_INDEX_TABLE; i++) {
- power_info->requested_power = power;
- power_info->base_power_index =
- ch_info->power_info[IWL_RATE_12M_INDEX_TABLE].
- base_power_index + IWL_CCK_FROM_OFDM_INDEX_DIFF;
- ++power_info;
- }
- }
-
- return 0;
-}
-
-/**
- * iwl3945_hw_reg_get_ch_txpower_limit - returns new power limit for channel
- *
- * NOTE: Returned power limit may be less (but not more) than requested,
- * based strictly on regulatory (eeprom and spectrum mgt) limitations
- * (no consideration for h/w clipping limitations).
- */
-static int iwl3945_hw_reg_get_ch_txpower_limit(struct iwl_channel_info *ch_info)
-{
- s8 max_power;
-
-#if 0
- /* if we're using TGd limits, use lower of TGd or EEPROM */
- if (ch_info->tgd_data.max_power != 0)
- max_power = min(ch_info->tgd_data.max_power,
- ch_info->eeprom.max_power_avg);
-
- /* else just use EEPROM limits */
- else
-#endif
- max_power = ch_info->eeprom.max_power_avg;
-
- return min(max_power, ch_info->max_power_avg);
-}
-
-/**
- * iwl3945_hw_reg_comp_txpower_temp - Compensate for temperature
- *
- * Compensate txpower settings of *all* channels for temperature.
- * This only accounts for the difference between current temperature
- * and the factory calibration temperatures, and bases the new settings
- * on the channel's base_power_index.
- *
- * If RxOn is "associated", this sends the new Txpower to NIC!
- */
-static int iwl3945_hw_reg_comp_txpower_temp(struct iwl_priv *priv)
-{
- struct iwl_channel_info *ch_info = NULL;
- struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom;
- int delta_index;
- const s8 *clip_pwrs; /* array of h/w max power levels for each rate */
- u8 a_band;
- u8 rate_index;
- u8 scan_tbl_index;
- u8 i;
- int ref_temp;
- int temperature = priv->temperature;
-
- if (priv->disable_tx_power_cal ||
- test_bit(STATUS_SCANNING, &priv->status)) {
- /* do not perform tx power calibration */
- return 0;
- }
- /* set up new Tx power info for each and every channel, 2.4 and 5.x */
- for (i = 0; i < priv->channel_count; i++) {
- ch_info = &priv->channel_info[i];
- a_band = is_channel_a_band(ch_info);
-
- /* Get this chnlgrp's factory calibration temperature */
- ref_temp = (s16)eeprom->groups[ch_info->group_index].
- temperature;
-
- /* get power index adjustment based on current and factory
- * temps */
- delta_index = iwl3945_hw_reg_adjust_power_by_temp(temperature,
- ref_temp);
-
- /* set tx power value for all rates, OFDM and CCK */
- for (rate_index = 0; rate_index < IWL_RATE_COUNT_3945;
- rate_index++) {
- int power_idx =
- ch_info->power_info[rate_index].base_power_index;
-
- /* temperature compensate */
- power_idx += delta_index;
-
- /* stay within table range */
- power_idx = iwl3945_hw_reg_fix_power_index(power_idx);
- ch_info->power_info[rate_index].
- power_table_index = (u8) power_idx;
- ch_info->power_info[rate_index].tpc =
- power_gain_table[a_band][power_idx];
- }
-
- /* Get this chnlgrp's rate-to-max/clip-powers table */
- clip_pwrs = priv->_3945.clip_groups[ch_info->group_index].clip_powers;
-
- /* set scan tx power, 1Mbit for CCK, 6Mbit for OFDM */
- for (scan_tbl_index = 0;
- scan_tbl_index < IWL_NUM_SCAN_RATES; scan_tbl_index++) {
- s32 actual_index = (scan_tbl_index == 0) ?
- IWL_RATE_1M_INDEX_TABLE : IWL_RATE_6M_INDEX_TABLE;
- iwl3945_hw_reg_set_scan_power(priv, scan_tbl_index,
- actual_index, clip_pwrs,
- ch_info, a_band);
- }
- }
-
- /* send Txpower command for current channel to ucode */
- return priv->cfg->ops->lib->send_tx_power(priv);
-}
-
-int iwl3945_hw_reg_set_txpower(struct iwl_priv *priv, s8 power)
-{
- struct iwl_channel_info *ch_info;
- s8 max_power;
- u8 a_band;
- u8 i;
-
- if (priv->tx_power_user_lmt == power) {
- IWL_DEBUG_POWER(priv, "Requested Tx power same as current "
- "limit: %ddBm.\n", power);
- return 0;
- }
-
- IWL_DEBUG_POWER(priv, "Setting upper limit clamp to %ddBm.\n", power);
- priv->tx_power_user_lmt = power;
-
- /* set up new Tx powers for each and every channel, 2.4 and 5.x */
-
- for (i = 0; i < priv->channel_count; i++) {
- ch_info = &priv->channel_info[i];
- a_band = is_channel_a_band(ch_info);
-
- /* find minimum power of all user and regulatory constraints
- * (does not consider h/w clipping limitations) */
- max_power = iwl3945_hw_reg_get_ch_txpower_limit(ch_info);
- max_power = min(power, max_power);
- if (max_power != ch_info->curr_txpow) {
- ch_info->curr_txpow = max_power;
-
- /* this considers the h/w clipping limitations */
- iwl3945_hw_reg_set_new_power(priv, ch_info);
- }
- }
-
- /* update txpower settings for all channels,
- * send to NIC if associated. */
- is_temp_calib_needed(priv);
- iwl3945_hw_reg_comp_txpower_temp(priv);
-
- return 0;
-}
-
-static int iwl3945_send_rxon_assoc(struct iwl_priv *priv,
- struct iwl_rxon_context *ctx)
-{
- int rc = 0;
- struct iwl_rx_packet *pkt;
- struct iwl3945_rxon_assoc_cmd rxon_assoc;
- struct iwl_host_cmd cmd = {
- .id = REPLY_RXON_ASSOC,
- .len = sizeof(rxon_assoc),
- .flags = CMD_WANT_SKB,
- .data = &rxon_assoc,
- };
- const struct iwl_rxon_cmd *rxon1 = &ctx->staging;
- const struct iwl_rxon_cmd *rxon2 = &ctx->active;
-
- if ((rxon1->flags == rxon2->flags) &&
- (rxon1->filter_flags == rxon2->filter_flags) &&
- (rxon1->cck_basic_rates == rxon2->cck_basic_rates) &&
- (rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates)) {
- IWL_DEBUG_INFO(priv, "Using current RXON_ASSOC. Not resending.\n");
- return 0;
- }
-
- rxon_assoc.flags = ctx->staging.flags;
- rxon_assoc.filter_flags = ctx->staging.filter_flags;
- rxon_assoc.ofdm_basic_rates = ctx->staging.ofdm_basic_rates;
- rxon_assoc.cck_basic_rates = ctx->staging.cck_basic_rates;
- rxon_assoc.reserved = 0;
-
- rc = iwl_send_cmd_sync(priv, &cmd);
- if (rc)
- return rc;
-
- pkt = (struct iwl_rx_packet *)cmd.reply_page;
- if (pkt->hdr.flags & IWL_CMD_FAILED_MSK) {
- IWL_ERR(priv, "Bad return from REPLY_RXON_ASSOC command\n");
- rc = -EIO;
- }
-
- iwl_free_pages(priv, cmd.reply_page);
-
- return rc;
-}
-
-/**
- * iwl3945_commit_rxon - commit staging_rxon to hardware
- *
- * The RXON command in staging_rxon is committed to the hardware and
- * the active_rxon structure is updated with the new data. This
- * function correctly transitions out of the RXON_ASSOC_MSK state if
- * a HW tune is required based on the RXON structure changes.
- */
-int iwl3945_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
-{
- /* cast away the const for active_rxon in this function */
- struct iwl3945_rxon_cmd *active_rxon = (void *)&ctx->active;
- struct iwl3945_rxon_cmd *staging_rxon = (void *)&ctx->staging;
- int rc = 0;
- bool new_assoc = !!(staging_rxon->filter_flags & RXON_FILTER_ASSOC_MSK);
-
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
- return -EINVAL;
-
- if (!iwl_is_alive(priv))
- return -1;
-
- /* always get timestamp with Rx frame */
- staging_rxon->flags |= RXON_FLG_TSF2HOST_MSK;
-
- /* select antenna */
- staging_rxon->flags &=
- ~(RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_SEL_MSK);
- staging_rxon->flags |= iwl3945_get_antenna_flags(priv);
-
- rc = iwl_check_rxon_cmd(priv, ctx);
- if (rc) {
- IWL_ERR(priv, "Invalid RXON configuration. Not committing.\n");
- return -EINVAL;
- }
-
- /* If we don't need to send a full RXON, we can use
- * iwl3945_rxon_assoc_cmd which is used to reconfigure filter
- * and other flags for the current radio configuration. */
- if (!iwl_full_rxon_required(priv, &priv->contexts[IWL_RXON_CTX_BSS])) {
- rc = iwl_send_rxon_assoc(priv,
- &priv->contexts[IWL_RXON_CTX_BSS]);
- if (rc) {
- IWL_ERR(priv, "Error setting RXON_ASSOC "
- "configuration (%d).\n", rc);
- return rc;
- }
-
- memcpy(active_rxon, staging_rxon, sizeof(*active_rxon));
-
- return 0;
- }
-
- /* If we are currently associated and the new config requires
- * an RXON_ASSOC and the new config wants the associated mask enabled,
- * we must clear the associated from the active configuration
- * before we apply the new config */
- if (iwl_is_associated(priv, IWL_RXON_CTX_BSS) && new_assoc) {
- IWL_DEBUG_INFO(priv, "Toggling associated bit on current RXON\n");
- active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
-
- /*
- * reserved4 and 5 could have been filled by the iwlcore code.
- * Let's clear them before pushing to the 3945.
- */
- active_rxon->reserved4 = 0;
- active_rxon->reserved5 = 0;
- rc = iwl_send_cmd_pdu(priv, REPLY_RXON,
- sizeof(struct iwl3945_rxon_cmd),
- &priv->contexts[IWL_RXON_CTX_BSS].active);
-
- /* If the mask clearing failed then we set
- * active_rxon back to what it was previously */
- if (rc) {
- active_rxon->filter_flags |= RXON_FILTER_ASSOC_MSK;
- IWL_ERR(priv, "Error clearing ASSOC_MSK on current "
- "configuration (%d).\n", rc);
- return rc;
- }
- iwl_clear_ucode_stations(priv,
- &priv->contexts[IWL_RXON_CTX_BSS]);
- iwl_restore_stations(priv, &priv->contexts[IWL_RXON_CTX_BSS]);
- }
-
- IWL_DEBUG_INFO(priv, "Sending RXON\n"
- "* with%s RXON_FILTER_ASSOC_MSK\n"
- "* channel = %d\n"
- "* bssid = %pM\n",
- (new_assoc ? "" : "out"),
- le16_to_cpu(staging_rxon->channel),
- staging_rxon->bssid_addr);
-
- /*
- * reserved4 and 5 could have been filled by the iwlcore code.
- * Let's clear them before pushing to the 3945.
- */
- staging_rxon->reserved4 = 0;
- staging_rxon->reserved5 = 0;
-
- iwl_set_rxon_hwcrypto(priv, ctx, !iwl3945_mod_params.sw_crypto);
-
- /* Apply the new configuration */
- rc = iwl_send_cmd_pdu(priv, REPLY_RXON,
- sizeof(struct iwl3945_rxon_cmd),
- staging_rxon);
- if (rc) {
- IWL_ERR(priv, "Error setting new configuration (%d).\n", rc);
- return rc;
- }
-
- memcpy(active_rxon, staging_rxon, sizeof(*active_rxon));
-
- if (!new_assoc) {
- iwl_clear_ucode_stations(priv,
- &priv->contexts[IWL_RXON_CTX_BSS]);
- iwl_restore_stations(priv, &priv->contexts[IWL_RXON_CTX_BSS]);
- }
-
- /* If we issue a new RXON command which required a tune then we must
- * send a new TXPOWER command or we won't be able to Tx any frames */
- rc = iwl_set_tx_power(priv, priv->tx_power_next, true);
- if (rc) {
- IWL_ERR(priv, "Error setting Tx power (%d).\n", rc);
- return rc;
- }
-
- /* Init the hardware's rate fallback order based on the band */
- rc = iwl3945_init_hw_rate_table(priv);
- if (rc) {
- IWL_ERR(priv, "Error setting HW rate table: %02X\n", rc);
- return -EIO;
- }
-
- return 0;
-}
-
-/**
- * iwl3945_reg_txpower_periodic - called when time to check our temperature.
- *
- * -- reset periodic timer
- * -- see if temp has changed enough to warrant re-calibration ... if so:
- * -- correct coeffs for temp (can reset temp timer)
- * -- save this temp as "last",
- * -- send new set of gain settings to NIC
- * NOTE: This should continue working, even when we're not associated,
- * so we can keep our internal table of scan powers current. */
-void iwl3945_reg_txpower_periodic(struct iwl_priv *priv)
-{
- /* This will kick in the "brute force"
- * iwl3945_hw_reg_comp_txpower_temp() below */
- if (!is_temp_calib_needed(priv))
- goto reschedule;
-
- /* Set up a new set of temp-adjusted TxPowers, send to NIC.
- * This is based *only* on current temperature,
- * ignoring any previous power measurements */
- iwl3945_hw_reg_comp_txpower_temp(priv);
-
- reschedule:
- queue_delayed_work(priv->workqueue,
- &priv->_3945.thermal_periodic, REG_RECALIB_PERIOD * HZ);
-}
-
-static void iwl3945_bg_reg_txpower_periodic(struct work_struct *work)
-{
- struct iwl_priv *priv = container_of(work, struct iwl_priv,
- _3945.thermal_periodic.work);
-
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
- return;
-
- mutex_lock(&priv->mutex);
- iwl3945_reg_txpower_periodic(priv);
- mutex_unlock(&priv->mutex);
-}
-
-/**
- * iwl3945_hw_reg_get_ch_grp_index - find the channel-group index (0-4)
- * for the channel.
- *
- * This function is used when initializing channel-info structs.
- *
- * NOTE: These channel groups do *NOT* match the bands above!
- * These channel groups are based on factory-tested channels;
- * on A-band, EEPROM's "group frequency" entries represent the top
- * channel in each group 1-4. Group 5 All B/G channels are in group 0.
- */
-static u16 iwl3945_hw_reg_get_ch_grp_index(struct iwl_priv *priv,
- const struct iwl_channel_info *ch_info)
-{
- struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom;
- struct iwl3945_eeprom_txpower_group *ch_grp = &eeprom->groups[0];
- u8 group;
- u16 group_index = 0; /* based on factory calib frequencies */
- u8 grp_channel;
-
- /* Find the group index for the channel ... don't use index 1(?) */
- if (is_channel_a_band(ch_info)) {
- for (group = 1; group < 5; group++) {
- grp_channel = ch_grp[group].group_channel;
- if (ch_info->channel <= grp_channel) {
- group_index = group;
- break;
- }
- }
- /* group 4 has a few channels *above* its factory cal freq */
- if (group == 5)
- group_index = 4;
- } else
- group_index = 0; /* 2.4 GHz, group 0 */
-
- IWL_DEBUG_POWER(priv, "Chnl %d mapped to grp %d\n", ch_info->channel,
- group_index);
- return group_index;
-}
-
-/**
- * iwl3945_hw_reg_get_matched_power_index - Interpolate to get nominal index
- *
- * Interpolate to get nominal (i.e. at factory calibration temperature) index
- * into radio/DSP gain settings table for requested power.
- */
-static int iwl3945_hw_reg_get_matched_power_index(struct iwl_priv *priv,
- s8 requested_power,
- s32 setting_index, s32 *new_index)
-{
- const struct iwl3945_eeprom_txpower_group *chnl_grp = NULL;
- struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom;
- s32 index0, index1;
- s32 power = 2 * requested_power;
- s32 i;
- const struct iwl3945_eeprom_txpower_sample *samples;
- s32 gains0, gains1;
- s32 res;
- s32 denominator;
-
- chnl_grp = &eeprom->groups[setting_index];
- samples = chnl_grp->samples;
- for (i = 0; i < 5; i++) {
- if (power == samples[i].power) {
- *new_index = samples[i].gain_index;
- return 0;
- }
- }
-
- if (power > samples[1].power) {
- index0 = 0;
- index1 = 1;
- } else if (power > samples[2].power) {
- index0 = 1;
- index1 = 2;
- } else if (power > samples[3].power) {
- index0 = 2;
- index1 = 3;
- } else {
- index0 = 3;
- index1 = 4;
- }
-
- denominator = (s32) samples[index1].power - (s32) samples[index0].power;
- if (denominator == 0)
- return -EINVAL;
- gains0 = (s32) samples[index0].gain_index * (1 << 19);
- gains1 = (s32) samples[index1].gain_index * (1 << 19);
- res = gains0 + (gains1 - gains0) *
- ((s32) power - (s32) samples[index0].power) / denominator +
- (1 << 18);
- *new_index = res >> 19;
- return 0;
-}
-
-static void iwl3945_hw_reg_init_channel_groups(struct iwl_priv *priv)
-{
- u32 i;
- s32 rate_index;
- struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom;
- const struct iwl3945_eeprom_txpower_group *group;
-
- IWL_DEBUG_POWER(priv, "Initializing factory calib info from EEPROM\n");
-
- for (i = 0; i < IWL_NUM_TX_CALIB_GROUPS; i++) {
- s8 *clip_pwrs; /* table of power levels for each rate */
- s8 satur_pwr; /* saturation power for each chnl group */
- group = &eeprom->groups[i];
-
- /* sanity check on factory saturation power value */
- if (group->saturation_power < 40) {
- IWL_WARN(priv, "Error: saturation power is %d, "
- "less than minimum expected 40\n",
- group->saturation_power);
- return;
- }
-
- /*
- * Derive requested power levels for each rate, based on
- * hardware capabilities (saturation power for band).
- * Basic value is 3dB down from saturation, with further
- * power reductions for highest 3 data rates. These
- * backoffs provide headroom for high rate modulation
- * power peaks, without too much distortion (clipping).
- */
- /* we'll fill in this array with h/w max power levels */
- clip_pwrs = (s8 *) priv->_3945.clip_groups[i].clip_powers;
-
- /* divide factory saturation power by 2 to find -3dB level */
- satur_pwr = (s8) (group->saturation_power >> 1);
-
- /* fill in channel group's nominal powers for each rate */
- for (rate_index = 0;
- rate_index < IWL_RATE_COUNT_3945; rate_index++, clip_pwrs++) {
- switch (rate_index) {
- case IWL_RATE_36M_INDEX_TABLE:
- if (i == 0) /* B/G */
- *clip_pwrs = satur_pwr;
- else /* A */
- *clip_pwrs = satur_pwr - 5;
- break;
- case IWL_RATE_48M_INDEX_TABLE:
- if (i == 0)
- *clip_pwrs = satur_pwr - 7;
- else
- *clip_pwrs = satur_pwr - 10;
- break;
- case IWL_RATE_54M_INDEX_TABLE:
- if (i == 0)
- *clip_pwrs = satur_pwr - 9;
- else
- *clip_pwrs = satur_pwr - 12;
- break;
- default:
- *clip_pwrs = satur_pwr;
- break;
- }
- }
- }
-}
-
-/**
- * iwl3945_txpower_set_from_eeprom - Set channel power info based on EEPROM
- *
- * Second pass (during init) to set up priv->channel_info
- *
- * Set up Tx-power settings in our channel info database for each VALID
- * (for this geo/SKU) channel, at all Tx data rates, based on eeprom values
- * and current temperature.
- *
- * Since this is based on current temperature (at init time), these values may
- * not be valid for very long, but it gives us a starting/default point,
- * and allows us to active (i.e. using Tx) scan.
- *
- * This does *not* write values to NIC, just sets up our internal table.
- */
-int iwl3945_txpower_set_from_eeprom(struct iwl_priv *priv)
-{
- struct iwl_channel_info *ch_info = NULL;
- struct iwl3945_channel_power_info *pwr_info;
- struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom;
- int delta_index;
- u8 rate_index;
- u8 scan_tbl_index;
- const s8 *clip_pwrs; /* array of power levels for each rate */
- u8 gain, dsp_atten;
- s8 power;
- u8 pwr_index, base_pwr_index, a_band;
- u8 i;
- int temperature;
-
- /* save temperature reference,
- * so we can determine next time to calibrate */
- temperature = iwl3945_hw_reg_txpower_get_temperature(priv);
- priv->last_temperature = temperature;
-
- iwl3945_hw_reg_init_channel_groups(priv);
-
- /* initialize Tx power info for each and every channel, 2.4 and 5.x */
- for (i = 0, ch_info = priv->channel_info; i < priv->channel_count;
- i++, ch_info++) {
- a_band = is_channel_a_band(ch_info);
- if (!is_channel_valid(ch_info))
- continue;
-
- /* find this channel's channel group (*not* "band") index */
- ch_info->group_index =
- iwl3945_hw_reg_get_ch_grp_index(priv, ch_info);
-
- /* Get this chnlgrp's rate->max/clip-powers table */
- clip_pwrs = priv->_3945.clip_groups[ch_info->group_index].clip_powers;
-
- /* calculate power index *adjustment* value according to
- * diff between current temperature and factory temperature */
- delta_index = iwl3945_hw_reg_adjust_power_by_temp(temperature,
- eeprom->groups[ch_info->group_index].
- temperature);
-
- IWL_DEBUG_POWER(priv, "Delta index for channel %d: %d [%d]\n",
- ch_info->channel, delta_index, temperature +
- IWL_TEMP_CONVERT);
-
- /* set tx power value for all OFDM rates */
- for (rate_index = 0; rate_index < IWL_OFDM_RATES;
- rate_index++) {
- s32 uninitialized_var(power_idx);
- int rc;
-
- /* use channel group's clip-power table,
- * but don't exceed channel's max power */
- s8 pwr = min(ch_info->max_power_avg,
- clip_pwrs[rate_index]);
-
- pwr_info = &ch_info->power_info[rate_index];
-
- /* get base (i.e. at factory-measured temperature)
- * power table index for this rate's power */
- rc = iwl3945_hw_reg_get_matched_power_index(priv, pwr,
- ch_info->group_index,
- &power_idx);
- if (rc) {
- IWL_ERR(priv, "Invalid power index\n");
- return rc;
- }
- pwr_info->base_power_index = (u8) power_idx;
-
- /* temperature compensate */
- power_idx += delta_index;
-
- /* stay within range of gain table */
- power_idx = iwl3945_hw_reg_fix_power_index(power_idx);
-
- /* fill 1 OFDM rate's iwl3945_channel_power_info struct */
- pwr_info->requested_power = pwr;
- pwr_info->power_table_index = (u8) power_idx;
- pwr_info->tpc.tx_gain =
- power_gain_table[a_band][power_idx].tx_gain;
- pwr_info->tpc.dsp_atten =
- power_gain_table[a_band][power_idx].dsp_atten;
- }
-
- /* set tx power for CCK rates, based on OFDM 12 Mbit settings*/
- pwr_info = &ch_info->power_info[IWL_RATE_12M_INDEX_TABLE];
- power = pwr_info->requested_power +
- IWL_CCK_FROM_OFDM_POWER_DIFF;
- pwr_index = pwr_info->power_table_index +
- IWL_CCK_FROM_OFDM_INDEX_DIFF;
- base_pwr_index = pwr_info->base_power_index +
- IWL_CCK_FROM_OFDM_INDEX_DIFF;
-
- /* stay within table range */
- pwr_index = iwl3945_hw_reg_fix_power_index(pwr_index);
- gain = power_gain_table[a_band][pwr_index].tx_gain;
- dsp_atten = power_gain_table[a_band][pwr_index].dsp_atten;
-
- /* fill each CCK rate's iwl3945_channel_power_info structure
- * NOTE: All CCK-rate Txpwrs are the same for a given chnl!
- * NOTE: CCK rates start at end of OFDM rates! */
- for (rate_index = 0;
- rate_index < IWL_CCK_RATES; rate_index++) {
- pwr_info = &ch_info->power_info[rate_index+IWL_OFDM_RATES];
- pwr_info->requested_power = power;
- pwr_info->power_table_index = pwr_index;
- pwr_info->base_power_index = base_pwr_index;
- pwr_info->tpc.tx_gain = gain;
- pwr_info->tpc.dsp_atten = dsp_atten;
- }
-
- /* set scan tx power, 1Mbit for CCK, 6Mbit for OFDM */
- for (scan_tbl_index = 0;
- scan_tbl_index < IWL_NUM_SCAN_RATES; scan_tbl_index++) {
- s32 actual_index = (scan_tbl_index == 0) ?
- IWL_RATE_1M_INDEX_TABLE : IWL_RATE_6M_INDEX_TABLE;
- iwl3945_hw_reg_set_scan_power(priv, scan_tbl_index,
- actual_index, clip_pwrs, ch_info, a_band);
- }
- }
-
- return 0;
-}
-
-int iwl3945_hw_rxq_stop(struct iwl_priv *priv)
-{
- int rc;
-
- iwl_write_direct32(priv, FH39_RCSR_CONFIG(0), 0);
- rc = iwl_poll_direct_bit(priv, FH39_RSSR_STATUS,
- FH39_RSSR_CHNL0_RX_STATUS_CHNL_IDLE, 1000);
- if (rc < 0)
- IWL_ERR(priv, "Can't stop Rx DMA.\n");
-
- return 0;
-}
-
-int iwl3945_hw_tx_queue_init(struct iwl_priv *priv, struct iwl_tx_queue *txq)
-{
- int txq_id = txq->q.id;
-
- struct iwl3945_shared *shared_data = priv->_3945.shared_virt;
-
- shared_data->tx_base_ptr[txq_id] = cpu_to_le32((u32)txq->q.dma_addr);
-
- iwl_write_direct32(priv, FH39_CBCC_CTRL(txq_id), 0);
- iwl_write_direct32(priv, FH39_CBCC_BASE(txq_id), 0);
-
- iwl_write_direct32(priv, FH39_TCSR_CONFIG(txq_id),
- FH39_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_NOINT |
- FH39_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_TXF |
- FH39_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_IFTFD |
- FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL |
- FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE);
-
- /* fake read to flush all prev. writes */
- iwl_read32(priv, FH39_TSSR_CBB_BASE);
-
- return 0;
-}
-
-/*
- * HCMD utils
- */
-static u16 iwl3945_get_hcmd_size(u8 cmd_id, u16 len)
-{
- switch (cmd_id) {
- case REPLY_RXON:
- return sizeof(struct iwl3945_rxon_cmd);
- case POWER_TABLE_CMD:
- return sizeof(struct iwl3945_powertable_cmd);
- default:
- return len;
- }
-}
-
-
-static u16 iwl3945_build_addsta_hcmd(const struct iwl_addsta_cmd *cmd, u8 *data)
-{
- struct iwl3945_addsta_cmd *addsta = (struct iwl3945_addsta_cmd *)data;
- addsta->mode = cmd->mode;
- memcpy(&addsta->sta, &cmd->sta, sizeof(struct sta_id_modify));
- memcpy(&addsta->key, &cmd->key, sizeof(struct iwl4965_keyinfo));
- addsta->station_flags = cmd->station_flags;
- addsta->station_flags_msk = cmd->station_flags_msk;
- addsta->tid_disable_tx = cpu_to_le16(0);
- addsta->rate_n_flags = cmd->rate_n_flags;
- addsta->add_immediate_ba_tid = cmd->add_immediate_ba_tid;
- addsta->remove_immediate_ba_tid = cmd->remove_immediate_ba_tid;
- addsta->add_immediate_ba_ssn = cmd->add_immediate_ba_ssn;
-
- return (u16)sizeof(struct iwl3945_addsta_cmd);
-}
-
-static int iwl3945_add_bssid_station(struct iwl_priv *priv,
- const u8 *addr, u8 *sta_id_r)
-{
- struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
- int ret;
- u8 sta_id;
- unsigned long flags;
-
- if (sta_id_r)
- *sta_id_r = IWL_INVALID_STATION;
-
- ret = iwl_add_station_common(priv, ctx, addr, 0, NULL, &sta_id);
- if (ret) {
- IWL_ERR(priv, "Unable to add station %pM\n", addr);
- return ret;
- }
-
- if (sta_id_r)
- *sta_id_r = sta_id;
-
- spin_lock_irqsave(&priv->sta_lock, flags);
- priv->stations[sta_id].used |= IWL_STA_LOCAL;
- spin_unlock_irqrestore(&priv->sta_lock, flags);
-
- return 0;
-}
-static int iwl3945_manage_ibss_station(struct iwl_priv *priv,
- struct ieee80211_vif *vif, bool add)
-{
- struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;
- int ret;
-
- if (add) {
- ret = iwl3945_add_bssid_station(priv, vif->bss_conf.bssid,
- &vif_priv->ibss_bssid_sta_id);
- if (ret)
- return ret;
-
- iwl3945_sync_sta(priv, vif_priv->ibss_bssid_sta_id,
- (priv->band == IEEE80211_BAND_5GHZ) ?
- IWL_RATE_6M_PLCP : IWL_RATE_1M_PLCP);
- iwl3945_rate_scale_init(priv->hw, vif_priv->ibss_bssid_sta_id);
-
- return 0;
- }
-
- return iwl_remove_station(priv, vif_priv->ibss_bssid_sta_id,
- vif->bss_conf.bssid);
-}
-
-/**
- * iwl3945_init_hw_rate_table - Initialize the hardware rate fallback table
- */
-int iwl3945_init_hw_rate_table(struct iwl_priv *priv)
-{
- int rc, i, index, prev_index;
- struct iwl3945_rate_scaling_cmd rate_cmd = {
- .reserved = {0, 0, 0},
- };
- struct iwl3945_rate_scaling_info *table = rate_cmd.table;
-
- for (i = 0; i < ARRAY_SIZE(iwl3945_rates); i++) {
- index = iwl3945_rates[i].table_rs_index;
-
- table[index].rate_n_flags =
- iwl3945_hw_set_rate_n_flags(iwl3945_rates[i].plcp, 0);
- table[index].try_cnt = priv->retry_rate;
- prev_index = iwl3945_get_prev_ieee_rate(i);
- table[index].next_rate_index =
- iwl3945_rates[prev_index].table_rs_index;
- }
-
- switch (priv->band) {
- case IEEE80211_BAND_5GHZ:
- IWL_DEBUG_RATE(priv, "Select A mode rate scale\n");
- /* If one of the following CCK rates is used,
- * have it fall back to the 6M OFDM rate */
- for (i = IWL_RATE_1M_INDEX_TABLE;
- i <= IWL_RATE_11M_INDEX_TABLE; i++)
- table[i].next_rate_index =
- iwl3945_rates[IWL_FIRST_OFDM_RATE].table_rs_index;
-
- /* Don't fall back to CCK rates */
- table[IWL_RATE_12M_INDEX_TABLE].next_rate_index =
- IWL_RATE_9M_INDEX_TABLE;
-
- /* Don't drop out of OFDM rates */
- table[IWL_RATE_6M_INDEX_TABLE].next_rate_index =
- iwl3945_rates[IWL_FIRST_OFDM_RATE].table_rs_index;
- break;
-
- case IEEE80211_BAND_2GHZ:
- IWL_DEBUG_RATE(priv, "Select B/G mode rate scale\n");
- /* If an OFDM rate is used, have it fall back to the
- * 1M CCK rates */
-
- if (!(priv->_3945.sta_supp_rates & IWL_OFDM_RATES_MASK) &&
- iwl_is_associated(priv, IWL_RXON_CTX_BSS)) {
-
- index = IWL_FIRST_CCK_RATE;
- for (i = IWL_RATE_6M_INDEX_TABLE;
- i <= IWL_RATE_54M_INDEX_TABLE; i++)
- table[i].next_rate_index =
- iwl3945_rates[index].table_rs_index;
-
- index = IWL_RATE_11M_INDEX_TABLE;
- /* CCK shouldn't fall back to OFDM... */
- table[index].next_rate_index = IWL_RATE_5M_INDEX_TABLE;
- }
- break;
-
- default:
- WARN_ON(1);
- break;
- }
-
- /* Update the rate scaling for control frame Tx */
- rate_cmd.table_id = 0;
- rc = iwl_send_cmd_pdu(priv, REPLY_RATE_SCALE, sizeof(rate_cmd),
- &rate_cmd);
- if (rc)
- return rc;
-
- /* Update the rate scaling for data frame Tx */
- rate_cmd.table_id = 1;
- return iwl_send_cmd_pdu(priv, REPLY_RATE_SCALE, sizeof(rate_cmd),
- &rate_cmd);
-}
-
-/* Called when initializing driver */
-int iwl3945_hw_set_hw_params(struct iwl_priv *priv)
-{
- memset((void *)&priv->hw_params, 0,
- sizeof(struct iwl_hw_params));
-
- priv->_3945.shared_virt =
- dma_alloc_coherent(&priv->pci_dev->dev,
- sizeof(struct iwl3945_shared),
- &priv->_3945.shared_phys, GFP_KERNEL);
- if (!priv->_3945.shared_virt) {
- IWL_ERR(priv, "failed to allocate pci memory\n");
- return -ENOMEM;
- }
-
- /* Assign number of Usable TX queues */
- priv->hw_params.max_txq_num = priv->cfg->base_params->num_of_queues;
-
- priv->hw_params.tfd_size = sizeof(struct iwl3945_tfd);
- priv->hw_params.rx_page_order = get_order(IWL_RX_BUF_SIZE_3K);
- priv->hw_params.max_rxq_size = RX_QUEUE_SIZE;
- priv->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG;
- priv->hw_params.max_stations = IWL3945_STATION_COUNT;
- priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id = IWL3945_BROADCAST_ID;
-
- priv->sta_key_max_num = STA_KEY_MAX_NUM;
-
- priv->hw_params.rx_wrt_ptr_reg = FH39_RSCSR_CHNL0_WPTR;
- priv->hw_params.max_beacon_itrvl = IWL39_MAX_UCODE_BEACON_INTERVAL;
- priv->hw_params.beacon_time_tsf_bits = IWL3945_EXT_BEACON_TIME_POS;
-
- return 0;
-}
-
-unsigned int iwl3945_hw_get_beacon_cmd(struct iwl_priv *priv,
- struct iwl3945_frame *frame, u8 rate)
-{
- struct iwl3945_tx_beacon_cmd *tx_beacon_cmd;
- unsigned int frame_size;
-
- tx_beacon_cmd = (struct iwl3945_tx_beacon_cmd *)&frame->u;
- memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd));
-
- tx_beacon_cmd->tx.sta_id =
- priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id;
- tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
-
- frame_size = iwl3945_fill_beacon_frame(priv,
- tx_beacon_cmd->frame,
- sizeof(frame->u) - sizeof(*tx_beacon_cmd));
-
- BUG_ON(frame_size > MAX_MPDU_SIZE);
- tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size);
-
- tx_beacon_cmd->tx.rate = rate;
- tx_beacon_cmd->tx.tx_flags = (TX_CMD_FLG_SEQ_CTL_MSK |
- TX_CMD_FLG_TSF_MSK);
-
- /* supp_rates[0] == OFDM start at IWL_FIRST_OFDM_RATE*/
- tx_beacon_cmd->tx.supp_rates[0] =
- (IWL_OFDM_BASIC_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF;
-
- tx_beacon_cmd->tx.supp_rates[1] =
- (IWL_CCK_BASIC_RATES_MASK & 0xF);
-
- return sizeof(struct iwl3945_tx_beacon_cmd) + frame_size;
-}
-
-void iwl3945_hw_rx_handler_setup(struct iwl_priv *priv)
-{
- priv->rx_handlers[REPLY_TX] = iwl3945_rx_reply_tx;
- priv->rx_handlers[REPLY_3945_RX] = iwl3945_rx_reply_rx;
-}
-
-void iwl3945_hw_setup_deferred_work(struct iwl_priv *priv)
-{
- INIT_DELAYED_WORK(&priv->_3945.thermal_periodic,
- iwl3945_bg_reg_txpower_periodic);
-}
-
-void iwl3945_hw_cancel_deferred_work(struct iwl_priv *priv)
-{
- cancel_delayed_work(&priv->_3945.thermal_periodic);
-}
-
-/* check contents of special bootstrap uCode SRAM */
-static int iwl3945_verify_bsm(struct iwl_priv *priv)
- {
- __le32 *image = priv->ucode_boot.v_addr;
- u32 len = priv->ucode_boot.len;
- u32 reg;
- u32 val;
-
- IWL_DEBUG_INFO(priv, "Begin verify bsm\n");
-
- /* verify BSM SRAM contents */
- val = iwl_read_prph(priv, BSM_WR_DWCOUNT_REG);
- for (reg = BSM_SRAM_LOWER_BOUND;
- reg < BSM_SRAM_LOWER_BOUND + len;
- reg += sizeof(u32), image++) {
- val = iwl_read_prph(priv, reg);
- if (val != le32_to_cpu(*image)) {
- IWL_ERR(priv, "BSM uCode verification failed at "
- "addr 0x%08X+%u (of %u), is 0x%x, s/b 0x%x\n",
- BSM_SRAM_LOWER_BOUND,
- reg - BSM_SRAM_LOWER_BOUND, len,
- val, le32_to_cpu(*image));
- return -EIO;
- }
- }
-
- IWL_DEBUG_INFO(priv, "BSM bootstrap uCode image OK\n");
-
- return 0;
-}
-
-
-/******************************************************************************
- *
- * EEPROM related functions
- *
- ******************************************************************************/
-
-/*
- * Clear the OWNER_MSK, to establish driver (instead of uCode running on
- * embedded controller) as EEPROM reader; each read is a series of pulses
- * to/from the EEPROM chip, not a single event, so even reads could conflict
- * if they weren't arbitrated by some ownership mechanism. Here, the driver
- * simply claims ownership, which should be safe when this function is called
- * (i.e. before loading uCode!).
- */
-static int iwl3945_eeprom_acquire_semaphore(struct iwl_priv *priv)
-{
- _iwl_clear_bit(priv, CSR_EEPROM_GP, CSR_EEPROM_GP_IF_OWNER_MSK);
- return 0;
-}
-
-
-static void iwl3945_eeprom_release_semaphore(struct iwl_priv *priv)
-{
- return;
-}
-
- /**
- * iwl3945_load_bsm - Load bootstrap instructions
- *
- * BSM operation:
- *
- * The Bootstrap State Machine (BSM) stores a short bootstrap uCode program
- * in special SRAM that does not power down during RFKILL. When powering back
- * up after power-saving sleeps (or during initial uCode load), the BSM loads
- * the bootstrap program into the on-board processor, and starts it.
- *
- * The bootstrap program loads (via DMA) instructions and data for a new
- * program from host DRAM locations indicated by the host driver in the
- * BSM_DRAM_* registers. Once the new program is loaded, it starts
- * automatically.
- *
- * When initializing the NIC, the host driver points the BSM to the
- * "initialize" uCode image. This uCode sets up some internal data, then
- * notifies host via "initialize alive" that it is complete.
- *
- * The host then replaces the BSM_DRAM_* pointer values to point to the
- * normal runtime uCode instructions and a backup uCode data cache buffer
- * (filled initially with starting data values for the on-board processor),
- * then triggers the "initialize" uCode to load and launch the runtime uCode,
- * which begins normal operation.
- *
- * When doing a power-save shutdown, runtime uCode saves data SRAM into
- * the backup data cache in DRAM before SRAM is powered down.
- *
- * When powering back up, the BSM loads the bootstrap program. This reloads
- * the runtime uCode instructions and the backup data cache into SRAM,
- * and re-launches the runtime uCode from where it left off.
- */
-static int iwl3945_load_bsm(struct iwl_priv *priv)
-{
- __le32 *image = priv->ucode_boot.v_addr;
- u32 len = priv->ucode_boot.len;
- dma_addr_t pinst;
- dma_addr_t pdata;
- u32 inst_len;
- u32 data_len;
- int rc;
- int i;
- u32 done;
- u32 reg_offset;
-
- IWL_DEBUG_INFO(priv, "Begin load bsm\n");
-
- /* make sure bootstrap program is no larger than BSM's SRAM size */
- if (len > IWL39_MAX_BSM_SIZE)
- return -EINVAL;
-
- /* Tell bootstrap uCode where to find the "Initialize" uCode
- * in host DRAM ... host DRAM physical address bits 31:0 for 3945.
- * NOTE: iwl3945_initialize_alive_start() will replace these values,
- * after the "initialize" uCode has run, to point to
- * runtime/protocol instructions and backup data cache. */
- pinst = priv->ucode_init.p_addr;
- pdata = priv->ucode_init_data.p_addr;
- inst_len = priv->ucode_init.len;
- data_len = priv->ucode_init_data.len;
-
- iwl_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst);
- iwl_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata);
- iwl_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG, inst_len);
- iwl_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG, data_len);
-
- /* Fill BSM memory with bootstrap instructions */
- for (reg_offset = BSM_SRAM_LOWER_BOUND;
- reg_offset < BSM_SRAM_LOWER_BOUND + len;
- reg_offset += sizeof(u32), image++)
- _iwl_write_prph(priv, reg_offset,
- le32_to_cpu(*image));
-
- rc = iwl3945_verify_bsm(priv);
- if (rc)
- return rc;
-
- /* Tell BSM to copy from BSM SRAM into instruction SRAM, when asked */
- iwl_write_prph(priv, BSM_WR_MEM_SRC_REG, 0x0);
- iwl_write_prph(priv, BSM_WR_MEM_DST_REG,
- IWL39_RTC_INST_LOWER_BOUND);
- iwl_write_prph(priv, BSM_WR_DWCOUNT_REG, len / sizeof(u32));
-
- /* Load bootstrap code into instruction SRAM now,
- * to prepare to load "initialize" uCode */
- iwl_write_prph(priv, BSM_WR_CTRL_REG,
- BSM_WR_CTRL_REG_BIT_START);
-
- /* Wait for load of bootstrap uCode to finish */
- for (i = 0; i < 100; i++) {
- done = iwl_read_prph(priv, BSM_WR_CTRL_REG);
- if (!(done & BSM_WR_CTRL_REG_BIT_START))
- break;
- udelay(10);
- }
- if (i < 100)
- IWL_DEBUG_INFO(priv, "BSM write complete, poll %d iterations\n", i);
- else {
- IWL_ERR(priv, "BSM write did not complete!\n");
- return -EIO;
- }
-
- /* Enable future boot loads whenever power management unit triggers it
- * (e.g. when powering back up after power-save shutdown) */
- iwl_write_prph(priv, BSM_WR_CTRL_REG,
- BSM_WR_CTRL_REG_BIT_START_EN);
-
- return 0;
-}
-
-static struct iwl_hcmd_ops iwl3945_hcmd = {
- .rxon_assoc = iwl3945_send_rxon_assoc,
- .commit_rxon = iwl3945_commit_rxon,
- .send_bt_config = iwl_send_bt_config,
-};
-
-static struct iwl_lib_ops iwl3945_lib = {
- .txq_attach_buf_to_tfd = iwl3945_hw_txq_attach_buf_to_tfd,
- .txq_free_tfd = iwl3945_hw_txq_free_tfd,
- .txq_init = iwl3945_hw_tx_queue_init,
- .load_ucode = iwl3945_load_bsm,
- .dump_nic_event_log = iwl3945_dump_nic_event_log,
- .dump_nic_error_log = iwl3945_dump_nic_error_log,
- .apm_ops = {
- .init = iwl3945_apm_init,
- .config = iwl3945_nic_config,
- },
- .eeprom_ops = {
- .regulatory_bands = {
- EEPROM_REGULATORY_BAND_1_CHANNELS,
- EEPROM_REGULATORY_BAND_2_CHANNELS,
- EEPROM_REGULATORY_BAND_3_CHANNELS,
- EEPROM_REGULATORY_BAND_4_CHANNELS,
- EEPROM_REGULATORY_BAND_5_CHANNELS,
- EEPROM_REGULATORY_BAND_NO_HT40,
- EEPROM_REGULATORY_BAND_NO_HT40,
- },
- .acquire_semaphore = iwl3945_eeprom_acquire_semaphore,
- .release_semaphore = iwl3945_eeprom_release_semaphore,
- .query_addr = iwlcore_eeprom_query_addr,
- },
- .send_tx_power = iwl3945_send_tx_power,
- .is_valid_rtc_data_addr = iwl3945_hw_valid_rtc_data_addr,
- .isr_ops = {
- .isr = iwl_isr_legacy,
- },
-
- .debugfs_ops = {
- .rx_stats_read = iwl3945_ucode_rx_stats_read,
- .tx_stats_read = iwl3945_ucode_tx_stats_read,
- .general_stats_read = iwl3945_ucode_general_stats_read,
- },
-};
-
-static const struct iwl_legacy_ops iwl3945_legacy_ops = {
- .post_associate = iwl3945_post_associate,
- .config_ap = iwl3945_config_ap,
- .manage_ibss_station = iwl3945_manage_ibss_station,
-};
-
-static struct iwl_hcmd_utils_ops iwl3945_hcmd_utils = {
- .get_hcmd_size = iwl3945_get_hcmd_size,
- .build_addsta_hcmd = iwl3945_build_addsta_hcmd,
- .tx_cmd_protection = iwl_legacy_tx_cmd_protection,
- .request_scan = iwl3945_request_scan,
- .post_scan = iwl3945_post_scan,
-};
-
-static const struct iwl_ops iwl3945_ops = {
- .lib = &iwl3945_lib,
- .hcmd = &iwl3945_hcmd,
- .utils = &iwl3945_hcmd_utils,
- .led = &iwl3945_led_ops,
- .legacy = &iwl3945_legacy_ops,
- .ieee80211_ops = &iwl3945_hw_ops,
-};
-
-static struct iwl_base_params iwl3945_base_params = {
- .eeprom_size = IWL3945_EEPROM_IMG_SIZE,
- .num_of_queues = IWL39_NUM_QUEUES,
- .pll_cfg_val = CSR39_ANA_PLL_CFG_VAL,
- .set_l0s = false,
- .use_bsm = true,
- .use_isr_legacy = true,
- .led_compensation = 64,
- .broken_powersave = true,
- .plcp_delta_threshold = IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF,
- .wd_timeout = IWL_DEF_WD_TIMEOUT,
- .max_event_log_size = 512,
- .tx_power_by_driver = true,
-};
-
-static struct iwl_cfg iwl3945_bg_cfg = {
- .name = "3945BG",
- .fw_name_pre = IWL3945_FW_PRE,
- .ucode_api_max = IWL3945_UCODE_API_MAX,
- .ucode_api_min = IWL3945_UCODE_API_MIN,
- .sku = IWL_SKU_G,
- .eeprom_ver = EEPROM_3945_EEPROM_VERSION,
- .ops = &iwl3945_ops,
- .mod_params = &iwl3945_mod_params,
- .base_params = &iwl3945_base_params,
- .led_mode = IWL_LED_BLINK,
-};
-
-static struct iwl_cfg iwl3945_abg_cfg = {
- .name = "3945ABG",
- .fw_name_pre = IWL3945_FW_PRE,
- .ucode_api_max = IWL3945_UCODE_API_MAX,
- .ucode_api_min = IWL3945_UCODE_API_MIN,
- .sku = IWL_SKU_A|IWL_SKU_G,
- .eeprom_ver = EEPROM_3945_EEPROM_VERSION,
- .ops = &iwl3945_ops,
- .mod_params = &iwl3945_mod_params,
- .base_params = &iwl3945_base_params,
- .led_mode = IWL_LED_BLINK,
-};
-
-DEFINE_PCI_DEVICE_TABLE(iwl3945_hw_card_ids) = {
- {IWL_PCI_DEVICE(0x4222, 0x1005, iwl3945_bg_cfg)},
- {IWL_PCI_DEVICE(0x4222, 0x1034, iwl3945_bg_cfg)},
- {IWL_PCI_DEVICE(0x4222, 0x1044, iwl3945_bg_cfg)},
- {IWL_PCI_DEVICE(0x4227, 0x1014, iwl3945_bg_cfg)},
- {IWL_PCI_DEVICE(0x4222, PCI_ANY_ID, iwl3945_abg_cfg)},
- {IWL_PCI_DEVICE(0x4227, PCI_ANY_ID, iwl3945_abg_cfg)},
- {0}
-};
-
-MODULE_DEVICE_TABLE(pci, iwl3945_hw_card_ids);
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.h b/drivers/net/wireless/iwlwifi/iwl-3945.h
deleted file mode 100644
index 3eef1eb..0000000
--- a/drivers/net/wireless/iwlwifi/iwl-3945.h
+++ /dev/null
@@ -1,308 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- * The full GNU General Public License is included in this distribution in the
- * file called LICENSE.
- *
- * Contact Information:
- * Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- *****************************************************************************/
-/*
- * Please use this file (iwl-3945.h) for driver implementation definitions.
- * Please use iwl-3945-commands.h for uCode API definitions.
- * Please use iwl-3945-hw.h for hardware-related definitions.
- */
-
-#ifndef __iwl_3945_h__
-#define __iwl_3945_h__
-
-#include <linux/pci.h> /* for struct pci_device_id */
-#include <linux/kernel.h>
-#include <net/ieee80211_radiotap.h>
-
-/* Hardware specific file defines the PCI IDs table for that hardware module */
-extern const struct pci_device_id iwl3945_hw_card_ids[];
-
-#include "iwl-csr.h"
-#include "iwl-prph.h"
-#include "iwl-fh.h"
-#include "iwl-3945-hw.h"
-#include "iwl-debug.h"
-#include "iwl-power.h"
-#include "iwl-dev.h"
-#include "iwl-led.h"
-
-/* Highest firmware API version supported */
-#define IWL3945_UCODE_API_MAX 2
-
-/* Lowest firmware API version supported */
-#define IWL3945_UCODE_API_MIN 1
-
-#define IWL3945_FW_PRE "iwlwifi-3945-"
-#define _IWL3945_MODULE_FIRMWARE(api) IWL3945_FW_PRE #api ".ucode"
-#define IWL3945_MODULE_FIRMWARE(api) _IWL3945_MODULE_FIRMWARE(api)
-
-/* Default noise level to report when noise measurement is not available.
- * This may be because we're:
- * 1) Not associated (4965, no beacon statistics being sent to driver)
- * 2) Scanning (noise measurement does not apply to associated channel)
- * 3) Receiving CCK (3945 delivers noise info only for OFDM frames)
- * Use default noise value of -127 ... this is below the range of measurable
- * Rx dBm for either 3945 or 4965, so it can indicate "unmeasurable" to user.
- * Also, -127 works better than 0 when averaging frames with/without
- * noise info (e.g. averaging might be done in app); measured dBm values are
- * always negative ... using a negative value as the default keeps all
- * averages within an s8's (used in some apps) range of negative values. */
-#define IWL_NOISE_MEAS_NOT_AVAILABLE (-127)
-
-/* Module parameters accessible from iwl-*.c */
-extern struct iwl_mod_params iwl3945_mod_params;
-
-struct iwl3945_rate_scale_data {
- u64 data;
- s32 success_counter;
- s32 success_ratio;
- s32 counter;
- s32 average_tpt;
- unsigned long stamp;
-};
-
-struct iwl3945_rs_sta {
- spinlock_t lock;
- struct iwl_priv *priv;
- s32 *expected_tpt;
- unsigned long last_partial_flush;
- unsigned long last_flush;
- u32 flush_time;
- u32 last_tx_packets;
- u32 tx_packets;
- u8 tgg;
- u8 flush_pending;
- u8 start_rate;
- struct timer_list rate_scale_flush;
- struct iwl3945_rate_scale_data win[IWL_RATE_COUNT_3945];
-#ifdef CONFIG_MAC80211_DEBUGFS
- struct dentry *rs_sta_dbgfs_stats_table_file;
-#endif
-
- /* used to be in sta_info */
- int last_txrate_idx;
-};
-
-
-/*
- * The common struct MUST be first because it is shared between
- * 3945 and agn!
- */
-struct iwl3945_sta_priv {
- struct iwl_station_priv_common common;
- struct iwl3945_rs_sta rs_sta;
-};
-
-enum iwl3945_antenna {
- IWL_ANTENNA_DIVERSITY,
- IWL_ANTENNA_MAIN,
- IWL_ANTENNA_AUX
-};
-
-/*
- * RTS threshold here is total size [2347] minus 4 FCS bytes
- * Per spec:
- * a value of 0 means RTS on all data/management packets
- * a value > max MSDU size means no RTS
- * else RTS for data/management frames where MPDU is larger
- * than RTS value.
- */
-#define DEFAULT_RTS_THRESHOLD 2347U
-#define MIN_RTS_THRESHOLD 0U
-#define MAX_RTS_THRESHOLD 2347U
-#define MAX_MSDU_SIZE 2304U
-#define MAX_MPDU_SIZE 2346U
-#define DEFAULT_BEACON_INTERVAL 100U
-#define DEFAULT_SHORT_RETRY_LIMIT 7U
-#define DEFAULT_LONG_RETRY_LIMIT 4U
-
-#define IWL_TX_FIFO_AC0 0
-#define IWL_TX_FIFO_AC1 1
-#define IWL_TX_FIFO_AC2 2
-#define IWL_TX_FIFO_AC3 3
-#define IWL_TX_FIFO_HCCA_1 5
-#define IWL_TX_FIFO_HCCA_2 6
-#define IWL_TX_FIFO_NONE 7
-
-#define IEEE80211_DATA_LEN 2304
-#define IEEE80211_4ADDR_LEN 30
-#define IEEE80211_HLEN (IEEE80211_4ADDR_LEN)
-#define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN)
-
-struct iwl3945_frame {
- union {
- struct ieee80211_hdr frame;
- struct iwl3945_tx_beacon_cmd beacon;
- u8 raw[IEEE80211_FRAME_LEN];
- u8 cmd[360];
- } u;
- struct list_head list;
-};
-
-#define SEQ_TO_SN(seq) (((seq) & IEEE80211_SCTL_SEQ) >> 4)
-#define SN_TO_SEQ(ssn) (((ssn) << 4) & IEEE80211_SCTL_SEQ)
-#define MAX_SN ((IEEE80211_SCTL_SEQ) >> 4)
-
-#define SUP_RATE_11A_MAX_NUM_CHANNELS 8
-#define SUP_RATE_11B_MAX_NUM_CHANNELS 4
-#define SUP_RATE_11G_MAX_NUM_CHANNELS 12
-
-#define IWL_SUPPORTED_RATES_IE_LEN 8
-
-#define SCAN_INTERVAL 100
-
-#define MAX_TID_COUNT 9
-
-#define IWL_INVALID_RATE 0xFF
-#define IWL_INVALID_VALUE -1
-
-#define STA_PS_STATUS_WAKE 0
-#define STA_PS_STATUS_SLEEP 1
-
-struct iwl3945_ibss_seq {
- u8 mac[ETH_ALEN];
- u16 seq_num;
- u16 frag_num;
- unsigned long packet_time;
- struct list_head list;
-};
-
-#define IWL_RX_HDR(x) ((struct iwl3945_rx_frame_hdr *)(\
- x->u.rx_frame.stats.payload + \
- x->u.rx_frame.stats.phy_count))
-#define IWL_RX_END(x) ((struct iwl3945_rx_frame_end *)(\
- IWL_RX_HDR(x)->payload + \
- le16_to_cpu(IWL_RX_HDR(x)->len)))
-#define IWL_RX_STATS(x) (&x->u.rx_frame.stats)
-#define IWL_RX_DATA(x) (IWL_RX_HDR(x)->payload)
-
-
-/******************************************************************************
- *
- * Functions implemented in iwl-base.c which are forward declared here
- * for use by iwl-*.c
- *
- *****************************************************************************/
-extern int iwl3945_calc_db_from_ratio(int sig_ratio);
-extern void iwl3945_rx_replenish(void *data);
-extern void iwl3945_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq);
-extern unsigned int iwl3945_fill_beacon_frame(struct iwl_priv *priv,
- struct ieee80211_hdr *hdr,int left);
-extern int iwl3945_dump_nic_event_log(struct iwl_priv *priv, bool full_log,
- char **buf, bool display);
-extern void iwl3945_dump_nic_error_log(struct iwl_priv *priv);
-
-/******************************************************************************
- *
- * Functions implemented in iwl-[34]*.c which are forward declared here
- * for use by iwl-base.c
- *
- * NOTE: The implementation of these functions are hardware specific
- * which is why they are in the hardware specific files (vs. iwl-base.c)
- *
- * Naming convention --
- * iwl3945_ <-- Its part of iwlwifi (should be changed to iwl3945_)
- * iwl3945_hw_ <-- Hardware specific (implemented in iwl-XXXX.c by all HW)
- * iwlXXXX_ <-- Hardware specific (implemented in iwl-XXXX.c for XXXX)
- * iwl3945_bg_ <-- Called from work queue context
- * iwl3945_mac_ <-- mac80211 callback
- *
- ****************************************************************************/
-extern void iwl3945_hw_rx_handler_setup(struct iwl_priv *priv);
-extern void iwl3945_hw_setup_deferred_work(struct iwl_priv *priv);
-extern void iwl3945_hw_cancel_deferred_work(struct iwl_priv *priv);
-extern int iwl3945_hw_rxq_stop(struct iwl_priv *priv);
-extern int iwl3945_hw_set_hw_params(struct iwl_priv *priv);
-extern int iwl3945_hw_nic_init(struct iwl_priv *priv);
-extern int iwl3945_hw_nic_stop_master(struct iwl_priv *priv);
-extern void iwl3945_hw_txq_ctx_free(struct iwl_priv *priv);
-extern void iwl3945_hw_txq_ctx_stop(struct iwl_priv *priv);
-extern int iwl3945_hw_nic_reset(struct iwl_priv *priv);
-extern int iwl3945_hw_txq_attach_buf_to_tfd(struct iwl_priv *priv,
- struct iwl_tx_queue *txq,
- dma_addr_t addr, u16 len,
- u8 reset, u8 pad);
-extern void iwl3945_hw_txq_free_tfd(struct iwl_priv *priv,
- struct iwl_tx_queue *txq);
-extern int iwl3945_hw_get_temperature(struct iwl_priv *priv);
-extern int iwl3945_hw_tx_queue_init(struct iwl_priv *priv,
- struct iwl_tx_queue *txq);
-extern unsigned int iwl3945_hw_get_beacon_cmd(struct iwl_priv *priv,
- struct iwl3945_frame *frame, u8 rate);
-void iwl3945_hw_build_tx_cmd_rate(struct iwl_priv *priv,
- struct iwl_device_cmd *cmd,
- struct ieee80211_tx_info *info,
- struct ieee80211_hdr *hdr,
- int sta_id, int tx_id);
-extern int iwl3945_hw_reg_send_txpower(struct iwl_priv *priv);
-extern int iwl3945_hw_reg_set_txpower(struct iwl_priv *priv, s8 power);
-extern void iwl3945_hw_rx_statistics(struct iwl_priv *priv,
- struct iwl_rx_mem_buffer *rxb);
-void iwl3945_reply_statistics(struct iwl_priv *priv,
- struct iwl_rx_mem_buffer *rxb);
-extern void iwl3945_disable_events(struct iwl_priv *priv);
-extern int iwl4965_get_temperature(const struct iwl_priv *priv);
-extern void iwl3945_post_associate(struct iwl_priv *priv);
-extern void iwl3945_config_ap(struct iwl_priv *priv);
-
-extern int iwl3945_commit_rxon(struct iwl_priv *priv,
- struct iwl_rxon_context *ctx);
-
-/**
- * iwl3945_hw_find_station - Find station id for a given BSSID
- * @bssid: MAC address of station ID to find
- *
- * NOTE: This should not be hardware specific but the code has
- * not yet been merged into a single common layer for managing the
- * station tables.
- */
-extern u8 iwl3945_hw_find_station(struct iwl_priv *priv, const u8 *bssid);
-
-extern struct ieee80211_ops iwl3945_hw_ops;
-
-/*
- * Forward declare iwl-3945.c functions for iwl-base.c
- */
-extern __le32 iwl3945_get_antenna_flags(const struct iwl_priv *priv);
-extern int iwl3945_init_hw_rate_table(struct iwl_priv *priv);
-extern void iwl3945_reg_txpower_periodic(struct iwl_priv *priv);
-extern int iwl3945_txpower_set_from_eeprom(struct iwl_priv *priv);
-
-extern const struct iwl_channel_info *iwl3945_get_channel_info(
- const struct iwl_priv *priv, enum ieee80211_band band, u16 channel);
-
-extern int iwl3945_rs_next_rate(struct iwl_priv *priv, int rate);
-
-/* scanning */
-int iwl3945_request_scan(struct iwl_priv *priv, struct ieee80211_vif *vif);
-void iwl3945_post_scan(struct iwl_priv *priv);
-
-/* rates */
-extern const struct iwl3945_rate_info iwl3945_rates[IWL_RATE_COUNT_3945];
-
-/* Requires full declaration of iwl_priv before including */
-#include "iwl-io.h"
-
-#endif
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965-hw.h b/drivers/net/wireless/iwlwifi/iwl-4965-hw.h
deleted file mode 100644
index 9166794..0000000
--- a/drivers/net/wireless/iwlwifi/iwl-4965-hw.h
+++ /dev/null
@@ -1,792 +0,0 @@
-/******************************************************************************
- *
- * This file is provided under a dual BSD/GPLv2 license. When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
- * USA
- *
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * Contact Information:
- * Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- * BSD LICENSE
- *
- * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *****************************************************************************/
-/*
- * Please use this file (iwl-4965-hw.h) only for hardware-related definitions.
- * Use iwl-commands.h for uCode API definitions.
- * Use iwl-dev.h for driver implementation definitions.
- */
-
-#ifndef __iwl_4965_hw_h__
-#define __iwl_4965_hw_h__
-
-#include "iwl-fh.h"
-
-/* EEPROM */
-#define IWL4965_EEPROM_IMG_SIZE 1024
-
-/*
- * uCode queue management definitions ...
- * The first queue used for block-ack aggregation is #7 (4965 only).
- * All block-ack aggregation queues should map to Tx DMA/FIFO channel 7.
- */
-#define IWL49_FIRST_AMPDU_QUEUE 7
-
-/* Sizes and addresses for instruction and data memory (SRAM) in
- * 4965's embedded processor. Driver access is via HBUS_TARG_MEM_* regs. */
-#define IWL49_RTC_INST_LOWER_BOUND (0x000000)
-#define IWL49_RTC_INST_UPPER_BOUND (0x018000)
-
-#define IWL49_RTC_DATA_LOWER_BOUND (0x800000)
-#define IWL49_RTC_DATA_UPPER_BOUND (0x80A000)
-
-#define IWL49_RTC_INST_SIZE (IWL49_RTC_INST_UPPER_BOUND - \
- IWL49_RTC_INST_LOWER_BOUND)
-#define IWL49_RTC_DATA_SIZE (IWL49_RTC_DATA_UPPER_BOUND - \
- IWL49_RTC_DATA_LOWER_BOUND)
-
-#define IWL49_MAX_INST_SIZE IWL49_RTC_INST_SIZE
-#define IWL49_MAX_DATA_SIZE IWL49_RTC_DATA_SIZE
-
-/* Size of uCode instruction memory in bootstrap state machine */
-#define IWL49_MAX_BSM_SIZE BSM_SRAM_SIZE
-
-static inline int iwl4965_hw_valid_rtc_data_addr(u32 addr)
-{
- return (addr >= IWL49_RTC_DATA_LOWER_BOUND) &&
- (addr < IWL49_RTC_DATA_UPPER_BOUND);
-}
-
-/********************* START TEMPERATURE *************************************/
-
-/**
- * 4965 temperature calculation.
- *
- * The driver must calculate the device temperature before calculating
- * a txpower setting (amplifier gain is temperature dependent). The
- * calculation uses 4 measurements, 3 of which (R1, R2, R3) are calibration
- * values used for the life of the driver, and one of which (R4) is the
- * real-time temperature indicator.
- *
- * uCode provides all 4 values to the driver via the "initialize alive"
- * notification (see struct iwl4965_init_alive_resp). After the runtime uCode
- * image loads, uCode updates the R4 value via statistics notifications
- * (see STATISTICS_NOTIFICATION), which occur after each received beacon
- * when associated, or can be requested via REPLY_STATISTICS_CMD.
- *
- * NOTE: uCode provides the R4 value as a 23-bit signed value. Driver
- * must sign-extend to 32 bits before applying formula below.
- *
- * Formula:
- *
- * degrees Kelvin = ((97 * 259 * (R4 - R2) / (R3 - R1)) / 100) + 8
- *
- * NOTE: The basic formula is 259 * (R4-R2) / (R3-R1). The 97/100 is
- * an additional correction, which should be centered around 0 degrees
- * Celsius (273 degrees Kelvin). The 8 (3 percent of 273) compensates for
- * centering the 97/100 correction around 0 degrees K.
- *
- * Add 273 to Kelvin value to find degrees Celsius, for comparing current
- * temperature with factory-measured temperatures when calculating txpower
- * settings.
- */
-#define TEMPERATURE_CALIB_KELVIN_OFFSET 8
-#define TEMPERATURE_CALIB_A_VAL 259
-
-/* Limit range of calculated temperature to be between these Kelvin values */
-#define IWL_TX_POWER_TEMPERATURE_MIN (263)
-#define IWL_TX_POWER_TEMPERATURE_MAX (410)
-
-#define IWL_TX_POWER_TEMPERATURE_OUT_OF_RANGE(t) \
- (((t) < IWL_TX_POWER_TEMPERATURE_MIN) || \
- ((t) > IWL_TX_POWER_TEMPERATURE_MAX))
-
-/********************* END TEMPERATURE ***************************************/
-
-/********************* START TXPOWER *****************************************/
-
-/**
- * 4965 txpower calculations rely on information from three sources:
- *
- * 1) EEPROM
- * 2) "initialize" alive notification
- * 3) statistics notifications
- *
- * EEPROM data consists of:
- *
- * 1) Regulatory information (max txpower and channel usage flags) is provided
- * separately for each channel that can possibly supported by 4965.
- * 40 MHz wide (.11n HT40) channels are listed separately from 20 MHz
- * (legacy) channels.
- *
- * See struct iwl4965_eeprom_channel for format, and struct iwl4965_eeprom
- * for locations in EEPROM.
- *
- * 2) Factory txpower calibration information is provided separately for
- * sub-bands of contiguous channels. 2.4GHz has just one sub-band,
- * but 5 GHz has several sub-bands.
- *
- * In addition, per-band (2.4 and 5 Ghz) saturation txpowers are provided.
- *
- * See struct iwl4965_eeprom_calib_info (and the tree of structures
- * contained within it) for format, and struct iwl4965_eeprom for
- * locations in EEPROM.
- *
- * "Initialization alive" notification (see struct iwl4965_init_alive_resp)
- * consists of:
- *
- * 1) Temperature calculation parameters.
- *
- * 2) Power supply voltage measurement.
- *
- * 3) Tx gain compensation to balance 2 transmitters for MIMO use.
- *
- * Statistics notifications deliver:
- *
- * 1) Current values for temperature param R4.
- */
-
-/**
- * To calculate a txpower setting for a given desired target txpower, channel,
- * modulation bit rate, and transmitter chain (4965 has 2 transmitters to
- * support MIMO and transmit diversity), driver must do the following:
- *
- * 1) Compare desired txpower vs. (EEPROM) regulatory limit for this channel.
- * Do not exceed regulatory limit; reduce target txpower if necessary.
- *
- * If setting up txpowers for MIMO rates (rate indexes 8-15, 24-31),
- * 2 transmitters will be used simultaneously; driver must reduce the
- * regulatory limit by 3 dB (half-power) for each transmitter, so the
- * combined total output of the 2 transmitters is within regulatory limits.
- *
- *
- * 2) Compare target txpower vs. (EEPROM) saturation txpower *reduced by
- * backoff for this bit rate*. Do not exceed (saturation - backoff[rate]);
- * reduce target txpower if necessary.
- *
- * Backoff values below are in 1/2 dB units (equivalent to steps in
- * txpower gain tables):
- *
- * OFDM 6 - 36 MBit: 10 steps (5 dB)
- * OFDM 48 MBit: 15 steps (7.5 dB)
- * OFDM 54 MBit: 17 steps (8.5 dB)
- * OFDM 60 MBit: 20 steps (10 dB)
- * CCK all rates: 10 steps (5 dB)
- *
- * Backoff values apply to saturation txpower on a per-transmitter basis;
- * when using MIMO (2 transmitters), each transmitter uses the same
- * saturation level provided in EEPROM, and the same backoff values;
- * no reduction (such as with regulatory txpower limits) is required.
- *
- * Saturation and Backoff values apply equally to 20 Mhz (legacy) channel
- * widths and 40 Mhz (.11n HT40) channel widths; there is no separate
- * factory measurement for ht40 channels.
- *
- * The result of this step is the final target txpower. The rest of
- * the steps figure out the proper settings for the device to achieve
- * that target txpower.
- *
- *
- * 3) Determine (EEPROM) calibration sub band for the target channel, by
- * comparing against first and last channels in each sub band
- * (see struct iwl4965_eeprom_calib_subband_info).
- *
- *
- * 4) Linearly interpolate (EEPROM) factory calibration measurement sets,
- * referencing the 2 factory-measured (sample) channels within the sub band.
- *
- * Interpolation is based on difference between target channel's frequency
- * and the sample channels' frequencies. Since channel numbers are based
- * on frequency (5 MHz between each channel number), this is equivalent
- * to interpolating based on channel number differences.
- *
- * Note that the sample channels may or may not be the channels at the
- * edges of the sub band. The target channel may be "outside" of the
- * span of the sampled channels.
- *
- * Driver may choose the pair (for 2 Tx chains) of measurements (see
- * struct iwl4965_eeprom_calib_ch_info) for which the actual measured
- * txpower comes closest to the desired txpower. Usually, though,
- * the middle set of measurements is closest to the regulatory limits,
- * and is therefore a good choice for all txpower calculations (this
- * assumes that high accuracy is needed for maximizing legal txpower,
- * while lower txpower configurations do not need as much accuracy).
- *
- * Driver should interpolate both members of the chosen measurement pair,
- * i.e. for both Tx chains (radio transmitters), unless the driver knows
- * that only one of the chains will be used (e.g. only one tx antenna
- * connected, but this should be unusual). The rate scaling algorithm
- * switches antennas to find best performance, so both Tx chains will
- * be used (although only one at a time) even for non-MIMO transmissions.
- *
- * Driver should interpolate factory values for temperature, gain table
- * index, and actual power. The power amplifier detector values are
- * not used by the driver.
- *
- * Sanity check: If the target channel happens to be one of the sample
- * channels, the results should agree with the sample channel's
- * measurements!
- *
- *
- * 5) Find difference between desired txpower and (interpolated)
- * factory-measured txpower. Using (interpolated) factory gain table index
- * (shown elsewhere) as a starting point, adjust this index lower to
- * increase txpower, or higher to decrease txpower, until the target
- * txpower is reached. Each step in the gain table is 1/2 dB.
- *
- * For example, if factory measured txpower is 16 dBm, and target txpower
- * is 13 dBm, add 6 steps to the factory gain index to reduce txpower
- * by 3 dB.
- *
- *
- * 6) Find difference between current device temperature and (interpolated)
- * factory-measured temperature for sub-band. Factory values are in
- * degrees Celsius. To calculate current temperature, see comments for
- * "4965 temperature calculation".
- *
- * If current temperature is higher than factory temperature, driver must
- * increase gain (lower gain table index), and vice verse.
- *
- * Temperature affects gain differently for different channels:
- *
- * 2.4 GHz all channels: 3.5 degrees per half-dB step
- * 5 GHz channels 34-43: 4.5 degrees per half-dB step
- * 5 GHz channels >= 44: 4.0 degrees per half-dB step
- *
- * NOTE: Temperature can increase rapidly when transmitting, especially
- * with heavy traffic at high txpowers. Driver should update
- * temperature calculations often under these conditions to
- * maintain strong txpower in the face of rising temperature.
- *
- *
- * 7) Find difference between current power supply voltage indicator
- * (from "initialize alive") and factory-measured power supply voltage
- * indicator (EEPROM).
- *
- * If the current voltage is higher (indicator is lower) than factory
- * voltage, gain should be reduced (gain table index increased) by:
- *
- * (eeprom - current) / 7
- *
- * If the current voltage is lower (indicator is higher) than factory
- * voltage, gain should be increased (gain table index decreased) by:
- *
- * 2 * (current - eeprom) / 7
- *
- * If number of index steps in either direction turns out to be > 2,
- * something is wrong ... just use 0.
- *
- * NOTE: Voltage compensation is independent of band/channel.
- *
- * NOTE: "Initialize" uCode measures current voltage, which is assumed
- * to be constant after this initial measurement. Voltage
- * compensation for txpower (number of steps in gain table)
- * may be calculated once and used until the next uCode bootload.
- *
- *
- * 8) If setting up txpowers for MIMO rates (rate indexes 8-15, 24-31),
- * adjust txpower for each transmitter chain, so txpower is balanced
- * between the two chains. There are 5 pairs of tx_atten[group][chain]
- * values in "initialize alive", one pair for each of 5 channel ranges:
- *
- * Group 0: 5 GHz channel 34-43
- * Group 1: 5 GHz channel 44-70
- * Group 2: 5 GHz channel 71-124
- * Group 3: 5 GHz channel 125-200
- * Group 4: 2.4 GHz all channels
- *
- * Add the tx_atten[group][chain] value to the index for the target chain.
- * The values are signed, but are in pairs of 0 and a non-negative number,
- * so as to reduce gain (if necessary) of the "hotter" channel. This
- * avoids any need to double-check for regulatory compliance after
- * this step.
- *
- *
- * 9) If setting up for a CCK rate, lower the gain by adding a CCK compensation
- * value to the index:
- *
- * Hardware rev B: 9 steps (4.5 dB)
- * Hardware rev C: 5 steps (2.5 dB)
- *
- * Hardware rev for 4965 can be determined by reading CSR_HW_REV_WA_REG,
- * bits [3:2], 1 = B, 2 = C.
- *
- * NOTE: This compensation is in addition to any saturation backoff that
- * might have been applied in an earlier step.
- *
- *
- * 10) Select the gain table, based on band (2.4 vs 5 GHz).
- *
- * Limit the adjusted index to stay within the table!
- *
- *
- * 11) Read gain table entries for DSP and radio gain, place into appropriate
- * location(s) in command (struct iwl4965_txpowertable_cmd).
- */
-
-/**
- * When MIMO is used (2 transmitters operating simultaneously), driver should
- * limit each transmitter to deliver a max of 3 dB below the regulatory limit
- * for the device. That is, use half power for each transmitter, so total
- * txpower is within regulatory limits.
- *
- * The value "6" represents number of steps in gain table to reduce power 3 dB.
- * Each step is 1/2 dB.
- */
-#define IWL_TX_POWER_MIMO_REGULATORY_COMPENSATION (6)
-
-/**
- * CCK gain compensation.
- *
- * When calculating txpowers for CCK, after making sure that the target power
- * is within regulatory and saturation limits, driver must additionally
- * back off gain by adding these values to the gain table index.
- *
- * Hardware rev for 4965 can be determined by reading CSR_HW_REV_WA_REG,
- * bits [3:2], 1 = B, 2 = C.
- */
-#define IWL_TX_POWER_CCK_COMPENSATION_B_STEP (9)
-#define IWL_TX_POWER_CCK_COMPENSATION_C_STEP (5)
-
-/*
- * 4965 power supply voltage compensation for txpower
- */
-#define TX_POWER_IWL_VOLTAGE_CODES_PER_03V (7)
-
-/**
- * Gain tables.
- *
- * The following tables contain pair of values for setting txpower, i.e.
- * gain settings for the output of the device's digital signal processor (DSP),
- * and for the analog gain structure of the transmitter.
- *
- * Each entry in the gain tables represents a step of 1/2 dB. Note that these
- * are *relative* steps, not indications of absolute output power. Output
- * power varies with temperature, voltage, and channel frequency, and also
- * requires consideration of average power (to satisfy regulatory constraints),
- * and peak power (to avoid distortion of the output signal).
- *
- * Each entry contains two values:
- * 1) DSP gain (or sometimes called DSP attenuation). This is a fine-grained
- * linear value that multiplies the output of the digital signal processor,
- * before being sent to the analog radio.
- * 2) Radio gain. This sets the analog gain of the radio Tx path.
- * It is a coarser setting, and behaves in a logarithmic (dB) fashion.
- *
- * EEPROM contains factory calibration data for txpower. This maps actual
- * measured txpower levels to gain settings in the "well known" tables
- * below ("well-known" means here that both factory calibration *and* the
- * driver work with the same table).
- *
- * There are separate tables for 2.4 GHz and 5 GHz bands. The 5 GHz table
- * has an extension (into negative indexes), in case the driver needs to
- * boost power setting for high device temperatures (higher than would be
- * present during factory calibration). A 5 Ghz EEPROM index of "40"
- * corresponds to the 49th entry in the table used by the driver.
- */
-#define MIN_TX_GAIN_INDEX (0) /* highest gain, lowest idx, 2.4 */
-#define MIN_TX_GAIN_INDEX_52GHZ_EXT (-9) /* highest gain, lowest idx, 5 */
-
-/**
- * 2.4 GHz gain table
- *
- * Index Dsp gain Radio gain
- * 0 110 0x3f (highest gain)
- * 1 104 0x3f
- * 2 98 0x3f
- * 3 110 0x3e
- * 4 104 0x3e
- * 5 98 0x3e
- * 6 110 0x3d
- * 7 104 0x3d
- * 8 98 0x3d
- * 9 110 0x3c
- * 10 104 0x3c
- * 11 98 0x3c
- * 12 110 0x3b
- * 13 104 0x3b
- * 14 98 0x3b
- * 15 110 0x3a
- * 16 104 0x3a
- * 17 98 0x3a
- * 18 110 0x39
- * 19 104 0x39
- * 20 98 0x39
- * 21 110 0x38
- * 22 104 0x38
- * 23 98 0x38
- * 24 110 0x37
- * 25 104 0x37
- * 26 98 0x37
- * 27 110 0x36
- * 28 104 0x36
- * 29 98 0x36
- * 30 110 0x35
- * 31 104 0x35
- * 32 98 0x35
- * 33 110 0x34
- * 34 104 0x34
- * 35 98 0x34
- * 36 110 0x33
- * 37 104 0x33
- * 38 98 0x33
- * 39 110 0x32
- * 40 104 0x32
- * 41 98 0x32
- * 42 110 0x31
- * 43 104 0x31
- * 44 98 0x31
- * 45 110 0x30
- * 46 104 0x30
- * 47 98 0x30
- * 48 110 0x6
- * 49 104 0x6
- * 50 98 0x6
- * 51 110 0x5
- * 52 104 0x5
- * 53 98 0x5
- * 54 110 0x4
- * 55 104 0x4
- * 56 98 0x4
- * 57 110 0x3
- * 58 104 0x3
- * 59 98 0x3
- * 60 110 0x2
- * 61 104 0x2
- * 62 98 0x2
- * 63 110 0x1
- * 64 104 0x1
- * 65 98 0x1
- * 66 110 0x0
- * 67 104 0x0
- * 68 98 0x0
- * 69 97 0
- * 70 96 0
- * 71 95 0
- * 72 94 0
- * 73 93 0
- * 74 92 0
- * 75 91 0
- * 76 90 0
- * 77 89 0
- * 78 88 0
- * 79 87 0
- * 80 86 0
- * 81 85 0
- * 82 84 0
- * 83 83 0
- * 84 82 0
- * 85 81 0
- * 86 80 0
- * 87 79 0
- * 88 78 0
- * 89 77 0
- * 90 76 0
- * 91 75 0
- * 92 74 0
- * 93 73 0
- * 94 72 0
- * 95 71 0
- * 96 70 0
- * 97 69 0
- * 98 68 0
- */
-
-/**
- * 5 GHz gain table
- *
- * Index Dsp gain Radio gain
- * -9 123 0x3F (highest gain)
- * -8 117 0x3F
- * -7 110 0x3F
- * -6 104 0x3F
- * -5 98 0x3F
- * -4 110 0x3E
- * -3 104 0x3E
- * -2 98 0x3E
- * -1 110 0x3D
- * 0 104 0x3D
- * 1 98 0x3D
- * 2 110 0x3C
- * 3 104 0x3C
- * 4 98 0x3C
- * 5 110 0x3B
- * 6 104 0x3B
- * 7 98 0x3B
- * 8 110 0x3A
- * 9 104 0x3A
- * 10 98 0x3A
- * 11 110 0x39
- * 12 104 0x39
- * 13 98 0x39
- * 14 110 0x38
- * 15 104 0x38
- * 16 98 0x38
- * 17 110 0x37
- * 18 104 0x37
- * 19 98 0x37
- * 20 110 0x36
- * 21 104 0x36
- * 22 98 0x36
- * 23 110 0x35
- * 24 104 0x35
- * 25 98 0x35
- * 26 110 0x34
- * 27 104 0x34
- * 28 98 0x34
- * 29 110 0x33
- * 30 104 0x33
- * 31 98 0x33
- * 32 110 0x32
- * 33 104 0x32
- * 34 98 0x32
- * 35 110 0x31
- * 36 104 0x31
- * 37 98 0x31
- * 38 110 0x30
- * 39 104 0x30
- * 40 98 0x30
- * 41 110 0x25
- * 42 104 0x25
- * 43 98 0x25
- * 44 110 0x24
- * 45 104 0x24
- * 46 98 0x24
- * 47 110 0x23
- * 48 104 0x23
- * 49 98 0x23
- * 50 110 0x22
- * 51 104 0x18
- * 52 98 0x18
- * 53 110 0x17
- * 54 104 0x17
- * 55 98 0x17
- * 56 110 0x16
- * 57 104 0x16
- * 58 98 0x16
- * 59 110 0x15
- * 60 104 0x15
- * 61 98 0x15
- * 62 110 0x14
- * 63 104 0x14
- * 64 98 0x14
- * 65 110 0x13
- * 66 104 0x13
- * 67 98 0x13
- * 68 110 0x12
- * 69 104 0x08
- * 70 98 0x08
- * 71 110 0x07
- * 72 104 0x07
- * 73 98 0x07
- * 74 110 0x06
- * 75 104 0x06
- * 76 98 0x06
- * 77 110 0x05
- * 78 104 0x05
- * 79 98 0x05
- * 80 110 0x04
- * 81 104 0x04
- * 82 98 0x04
- * 83 110 0x03
- * 84 104 0x03
- * 85 98 0x03
- * 86 110 0x02
- * 87 104 0x02
- * 88 98 0x02
- * 89 110 0x01
- * 90 104 0x01
- * 91 98 0x01
- * 92 110 0x00
- * 93 104 0x00
- * 94 98 0x00
- * 95 93 0x00
- * 96 88 0x00
- * 97 83 0x00
- * 98 78 0x00
- */
-
-
-/**
- * Sanity checks and default values for EEPROM regulatory levels.
- * If EEPROM values fall outside MIN/MAX range, use default values.
- *
- * Regulatory limits refer to the maximum average txpower allowed by
- * regulatory agencies in the geographies in which the device is meant
- * to be operated. These limits are SKU-specific (i.e. geography-specific),
- * and channel-specific; each channel has an individual regulatory limit
- * listed in the EEPROM.
- *
- * Units are in half-dBm (i.e. "34" means 17 dBm).
- */
-#define IWL_TX_POWER_DEFAULT_REGULATORY_24 (34)
-#define IWL_TX_POWER_DEFAULT_REGULATORY_52 (34)
-#define IWL_TX_POWER_REGULATORY_MIN (0)
-#define IWL_TX_POWER_REGULATORY_MAX (34)
-
-/**
- * Sanity checks and default values for EEPROM saturation levels.
- * If EEPROM values fall outside MIN/MAX range, use default values.
- *
- * Saturation is the highest level that the output power amplifier can produce
- * without significant clipping distortion. This is a "peak" power level.
- * Different types of modulation (i.e. various "rates", and OFDM vs. CCK)
- * require differing amounts of backoff, relative to their average power output,
- * in order to avoid clipping distortion.
- *
- * Driver must make sure that it is violating neither the saturation limit,
- * nor the regulatory limit, when calculating Tx power settings for various
- * rates.
- *
- * Units are in half-dBm (i.e. "38" means 19 dBm).
- */
-#define IWL_TX_POWER_DEFAULT_SATURATION_24 (38)
-#define IWL_TX_POWER_DEFAULT_SATURATION_52 (38)
-#define IWL_TX_POWER_SATURATION_MIN (20)
-#define IWL_TX_POWER_SATURATION_MAX (50)
-
-/**
- * Channel groups used for Tx Attenuation calibration (MIMO tx channel balance)
- * and thermal Txpower calibration.
- *
- * When calculating txpower, driver must compensate for current device
- * temperature; higher temperature requires higher gain. Driver must calculate
- * current temperature (see "4965 temperature calculation"), then compare vs.
- * factory calibration temperature in EEPROM; if current temperature is higher
- * than factory temperature, driver must *increase* gain by proportions shown
- * in table below. If current temperature is lower than factory, driver must
- * *decrease* gain.
- *
- * Different frequency ranges require different compensation, as shown below.
- */
-/* Group 0, 5.2 GHz ch 34-43: 4.5 degrees per 1/2 dB. */
-#define CALIB_IWL_TX_ATTEN_GR1_FCH 34
-#define CALIB_IWL_TX_ATTEN_GR1_LCH 43
-
-/* Group 1, 5.3 GHz ch 44-70: 4.0 degrees per 1/2 dB. */
-#define CALIB_IWL_TX_ATTEN_GR2_FCH 44
-#define CALIB_IWL_TX_ATTEN_GR2_LCH 70
-
-/* Group 2, 5.5 GHz ch 71-124: 4.0 degrees per 1/2 dB. */
-#define CALIB_IWL_TX_ATTEN_GR3_FCH 71
-#define CALIB_IWL_TX_ATTEN_GR3_LCH 124
-
-/* Group 3, 5.7 GHz ch 125-200: 4.0 degrees per 1/2 dB. */
-#define CALIB_IWL_TX_ATTEN_GR4_FCH 125
-#define CALIB_IWL_TX_ATTEN_GR4_LCH 200
-
-/* Group 4, 2.4 GHz all channels: 3.5 degrees per 1/2 dB. */
-#define CALIB_IWL_TX_ATTEN_GR5_FCH 1
-#define CALIB_IWL_TX_ATTEN_GR5_LCH 20
-
-enum {
- CALIB_CH_GROUP_1 = 0,
- CALIB_CH_GROUP_2 = 1,
- CALIB_CH_GROUP_3 = 2,
- CALIB_CH_GROUP_4 = 3,
- CALIB_CH_GROUP_5 = 4,
- CALIB_CH_GROUP_MAX
-};
-
-/********************* END TXPOWER *****************************************/
-
-
-/**
- * Tx/Rx Queues
- *
- * Most communication between driver and 4965 is via queues of data buffers.
- * For example, all commands that the driver issues to device's embedded
- * controller (uCode) are via the command queue (one of the Tx queues). All
- * uCode command responses/replies/notifications, including Rx frames, are
- * conveyed from uCode to driver via the Rx queue.
- *
- * Most support for these queues, including handshake support, resides in
- * structures in host DRAM, shared between the driver and the device. When
- * allocating this memory, the driver must make sure that data written by
- * the host CPU updates DRAM immediately (and does not get "stuck" in CPU's
- * cache memory), so DRAM and cache are consistent, and the device can
- * immediately see changes made by the driver.
- *
- * 4965 supports up to 16 DRAM-based Tx queues, and services these queues via
- * up to 7 DMA channels (FIFOs). Each Tx queue is supported by a circular array
- * in DRAM containing 256 Transmit Frame Descriptors (TFDs).
- */
-#define IWL49_NUM_FIFOS 7
-#define IWL49_CMD_FIFO_NUM 4
-#define IWL49_NUM_QUEUES 16
-#define IWL49_NUM_AMPDU_QUEUES 8
-
-
-/**
- * struct iwl4965_schedq_bc_tbl
- *
- * Byte Count table
- *
- * Each Tx queue uses a byte-count table containing 320 entries:
- * one 16-bit entry for each of 256 TFDs, plus an additional 64 entries that
- * duplicate the first 64 entries (to avoid wrap-around within a Tx window;
- * max Tx window is 64 TFDs).
- *
- * When driver sets up a new TFD, it must also enter the total byte count
- * of the frame to be transmitted into the corresponding entry in the byte
- * count table for the chosen Tx queue. If the TFD index is 0-63, the driver
- * must duplicate the byte count entry in corresponding index 256-319.
- *
- * padding puts each byte count table on a 1024-byte boundary;
- * 4965 assumes tables are separated by 1024 bytes.
- */
-struct iwl4965_scd_bc_tbl {
- __le16 tfd_offset[TFD_QUEUE_BC_SIZE];
- u8 pad[1024 - (TFD_QUEUE_BC_SIZE) * sizeof(__le16)];
-} __packed;
-
-#endif /* !__iwl_4965_hw_h__ */
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
deleted file mode 100644
index 8998ed1..0000000
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ /dev/null
@@ -1,2666 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- * The full GNU General Public License is included in this distribution in the
- * file called LICENSE.
- *
- * Contact Information:
- * Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- *****************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/dma-mapping.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-#include <linux/skbuff.h>
-#include <linux/netdevice.h>
-#include <linux/wireless.h>
-#include <net/mac80211.h>
-#include <linux/etherdevice.h>
-#include <asm/unaligned.h>
-
-#include "iwl-eeprom.h"
-#include "iwl-dev.h"
-#include "iwl-core.h"
-#include "iwl-io.h"
-#include "iwl-helpers.h"
-#include "iwl-agn-calib.h"
-#include "iwl-sta.h"
-#include "iwl-agn-led.h"
-#include "iwl-agn.h"
-#include "iwl-agn-debugfs.h"
-#include "iwl-legacy.h"
-
-static int iwl4965_send_tx_power(struct iwl_priv *priv);
-static int iwl4965_hw_get_temperature(struct iwl_priv *priv);
-
-/* Highest firmware API version supported */
-#define IWL4965_UCODE_API_MAX 2
-
-/* Lowest firmware API version supported */
-#define IWL4965_UCODE_API_MIN 2
-
-#define IWL4965_FW_PRE "iwlwifi-4965-"
-#define _IWL4965_MODULE_FIRMWARE(api) IWL4965_FW_PRE #api ".ucode"
-#define IWL4965_MODULE_FIRMWARE(api) _IWL4965_MODULE_FIRMWARE(api)
-
-/* check contents of special bootstrap uCode SRAM */
-static int iwl4965_verify_bsm(struct iwl_priv *priv)
-{
- __le32 *image = priv->ucode_boot.v_addr;
- u32 len = priv->ucode_boot.len;
- u32 reg;
- u32 val;
-
- IWL_DEBUG_INFO(priv, "Begin verify bsm\n");
-
- /* verify BSM SRAM contents */
- val = iwl_read_prph(priv, BSM_WR_DWCOUNT_REG);
- for (reg = BSM_SRAM_LOWER_BOUND;
- reg < BSM_SRAM_LOWER_BOUND + len;
- reg += sizeof(u32), image++) {
- val = iwl_read_prph(priv, reg);
- if (val != le32_to_cpu(*image)) {
- IWL_ERR(priv, "BSM uCode verification failed at "
- "addr 0x%08X+%u (of %u), is 0x%x, s/b 0x%x\n",
- BSM_SRAM_LOWER_BOUND,
- reg - BSM_SRAM_LOWER_BOUND, len,
- val, le32_to_cpu(*image));
- return -EIO;
- }
- }
-
- IWL_DEBUG_INFO(priv, "BSM bootstrap uCode image OK\n");
-
- return 0;
-}
-
-/**
- * iwl4965_load_bsm - Load bootstrap instructions
- *
- * BSM operation:
- *
- * The Bootstrap State Machine (BSM) stores a short bootstrap uCode program
- * in special SRAM that does not power down during RFKILL. When powering back
- * up after power-saving sleeps (or during initial uCode load), the BSM loads
- * the bootstrap program into the on-board processor, and starts it.
- *
- * The bootstrap program loads (via DMA) instructions and data for a new
- * program from host DRAM locations indicated by the host driver in the
- * BSM_DRAM_* registers. Once the new program is loaded, it starts
- * automatically.
- *
- * When initializing the NIC, the host driver points the BSM to the
- * "initialize" uCode image. This uCode sets up some internal data, then
- * notifies host via "initialize alive" that it is complete.
- *
- * The host then replaces the BSM_DRAM_* pointer values to point to the
- * normal runtime uCode instructions and a backup uCode data cache buffer
- * (filled initially with starting data values for the on-board processor),
- * then triggers the "initialize" uCode to load and launch the runtime uCode,
- * which begins normal operation.
- *
- * When doing a power-save shutdown, runtime uCode saves data SRAM into
- * the backup data cache in DRAM before SRAM is powered down.
- *
- * When powering back up, the BSM loads the bootstrap program. This reloads
- * the runtime uCode instructions and the backup data cache into SRAM,
- * and re-launches the runtime uCode from where it left off.
- */
-static int iwl4965_load_bsm(struct iwl_priv *priv)
-{
- __le32 *image = priv->ucode_boot.v_addr;
- u32 len = priv->ucode_boot.len;
- dma_addr_t pinst;
- dma_addr_t pdata;
- u32 inst_len;
- u32 data_len;
- int i;
- u32 done;
- u32 reg_offset;
- int ret;
-
- IWL_DEBUG_INFO(priv, "Begin load bsm\n");
-
- priv->ucode_type = UCODE_RT;
-
- /* make sure bootstrap program is no larger than BSM's SRAM size */
- if (len > IWL49_MAX_BSM_SIZE)
- return -EINVAL;
-
- /* Tell bootstrap uCode where to find the "Initialize" uCode
- * in host DRAM ... host DRAM physical address bits 35:4 for 4965.
- * NOTE: iwl_init_alive_start() will replace these values,
- * after the "initialize" uCode has run, to point to
- * runtime/protocol instructions and backup data cache.
- */
- pinst = priv->ucode_init.p_addr >> 4;
- pdata = priv->ucode_init_data.p_addr >> 4;
- inst_len = priv->ucode_init.len;
- data_len = priv->ucode_init_data.len;
-
- iwl_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst);
- iwl_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata);
- iwl_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG, inst_len);
- iwl_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG, data_len);
-
- /* Fill BSM memory with bootstrap instructions */
- for (reg_offset = BSM_SRAM_LOWER_BOUND;
- reg_offset < BSM_SRAM_LOWER_BOUND + len;
- reg_offset += sizeof(u32), image++)
- _iwl_write_prph(priv, reg_offset, le32_to_cpu(*image));
-
- ret = iwl4965_verify_bsm(priv);
- if (ret)
- return ret;
-
- /* Tell BSM to copy from BSM SRAM into instruction SRAM, when asked */
- iwl_write_prph(priv, BSM_WR_MEM_SRC_REG, 0x0);
- iwl_write_prph(priv, BSM_WR_MEM_DST_REG, IWL49_RTC_INST_LOWER_BOUND);
- iwl_write_prph(priv, BSM_WR_DWCOUNT_REG, len / sizeof(u32));
-
- /* Load bootstrap code into instruction SRAM now,
- * to prepare to load "initialize" uCode */
- iwl_write_prph(priv, BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START);
-
- /* Wait for load of bootstrap uCode to finish */
- for (i = 0; i < 100; i++) {
- done = iwl_read_prph(priv, BSM_WR_CTRL_REG);
- if (!(done & BSM_WR_CTRL_REG_BIT_START))
- break;
- udelay(10);
- }
- if (i < 100)
- IWL_DEBUG_INFO(priv, "BSM write complete, poll %d iterations\n", i);
- else {
- IWL_ERR(priv, "BSM write did not complete!\n");
- return -EIO;
- }
-
- /* Enable future boot loads whenever power management unit triggers it
- * (e.g. when powering back up after power-save shutdown) */
- iwl_write_prph(priv, BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START_EN);
-
-
- return 0;
-}
-
-/**
- * iwl4965_set_ucode_ptrs - Set uCode address location
- *
- * Tell initialization uCode where to find runtime uCode.
- *
- * BSM registers initially contain pointers to initialization uCode.
- * We need to replace them to load runtime uCode inst and data,
- * and to save runtime data when powering down.
- */
-static int iwl4965_set_ucode_ptrs(struct iwl_priv *priv)
-{
- dma_addr_t pinst;
- dma_addr_t pdata;
- int ret = 0;
-
- /* bits 35:4 for 4965 */
- pinst = priv->ucode_code.p_addr >> 4;
- pdata = priv->ucode_data_backup.p_addr >> 4;
-
- /* Tell bootstrap uCode where to find image to load */
- iwl_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst);
- iwl_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata);
- iwl_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG,
- priv->ucode_data.len);
-
- /* Inst byte count must be last to set up, bit 31 signals uCode
- * that all new ptr/size info is in place */
- iwl_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG,
- priv->ucode_code.len | BSM_DRAM_INST_LOAD);
- IWL_DEBUG_INFO(priv, "Runtime uCode pointers are set.\n");
-
- return ret;
-}
-
-/**
- * iwl4965_init_alive_start - Called after REPLY_ALIVE notification received
- *
- * Called after REPLY_ALIVE notification received from "initialize" uCode.
- *
- * The 4965 "initialize" ALIVE reply contains calibration data for:
- * Voltage, temperature, and MIMO tx gain correction, now stored in priv
- * (3945 does not contain this data).
- *
- * Tell "initialize" uCode to go ahead and load the runtime uCode.
-*/
-static void iwl4965_init_alive_start(struct iwl_priv *priv)
-{
- /* Bootstrap uCode has loaded initialize uCode ... verify inst image.
- * This is a paranoid check, because we would not have gotten the
- * "initialize" alive if code weren't properly loaded. */
- if (iwl_verify_ucode(priv)) {
- /* Runtime instruction load was bad;
- * take it all the way back down so we can try again */
- IWL_DEBUG_INFO(priv, "Bad \"initialize\" uCode load.\n");
- goto restart;
- }
-
- /* Calculate temperature */
- priv->temperature = iwl4965_hw_get_temperature(priv);
-
- /* Send pointers to protocol/runtime uCode image ... init code will
- * load and launch runtime uCode, which will send us another "Alive"
- * notification. */
- IWL_DEBUG_INFO(priv, "Initialization Alive received.\n");
- if (iwl4965_set_ucode_ptrs(priv)) {
- /* Runtime instruction load won't happen;
- * take it all the way back down so we can try again */
- IWL_DEBUG_INFO(priv, "Couldn't set up uCode pointers.\n");
- goto restart;
- }
- return;
-
-restart:
- queue_work(priv->workqueue, &priv->restart);
-}
-
-static bool is_ht40_channel(__le32 rxon_flags)
-{
- int chan_mod = le32_to_cpu(rxon_flags & RXON_FLG_CHANNEL_MODE_MSK)
- >> RXON_FLG_CHANNEL_MODE_POS;
- return ((chan_mod == CHANNEL_MODE_PURE_40) ||
- (chan_mod == CHANNEL_MODE_MIXED));
-}
-
-/*
- * EEPROM handlers
- */
-static u16 iwl4965_eeprom_calib_version(struct iwl_priv *priv)
-{
- return iwl_eeprom_query16(priv, EEPROM_4965_CALIB_VERSION_OFFSET);
-}
-
-/*
- * Activate/Deactivate Tx DMA/FIFO channels according tx fifos mask
- * must be called under priv->lock and mac access
- */
-static void iwl4965_txq_set_sched(struct iwl_priv *priv, u32 mask)
-{
- iwl_write_prph(priv, IWL49_SCD_TXFACT, mask);
-}
-
-static void iwl4965_nic_config(struct iwl_priv *priv)
-{
- unsigned long flags;
- u16 radio_cfg;
-
- spin_lock_irqsave(&priv->lock, flags);
-
- radio_cfg = iwl_eeprom_query16(priv, EEPROM_RADIO_CONFIG);
-
- /* write radio config values to register */
- if (EEPROM_RF_CFG_TYPE_MSK(radio_cfg) == EEPROM_4965_RF_CFG_TYPE_MAX)
- iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
- EEPROM_RF_CFG_TYPE_MSK(radio_cfg) |
- EEPROM_RF_CFG_STEP_MSK(radio_cfg) |
- EEPROM_RF_CFG_DASH_MSK(radio_cfg));
-
- /* set CSR_HW_CONFIG_REG for uCode use */
- iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
- CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI |
- CSR_HW_IF_CONFIG_REG_BIT_MAC_SI);
-
- priv->calib_info = (struct iwl_eeprom_calib_info *)
- iwl_eeprom_query_addr(priv, EEPROM_4965_CALIB_TXPOWER_OFFSET);
-
- spin_unlock_irqrestore(&priv->lock, flags);
-}
-
-/* Reset differential Rx gains in NIC to prepare for chain noise calibration.
- * Called after every association, but this runs only once!
- * ... once chain noise is calibrated the first time, it's good forever. */
-static void iwl4965_chain_noise_reset(struct iwl_priv *priv)
-{
- struct iwl_chain_noise_data *data = &(priv->chain_noise_data);
-
- if ((data->state == IWL_CHAIN_NOISE_ALIVE) &&
- iwl_is_any_associated(priv)) {
- struct iwl_calib_diff_gain_cmd cmd;
-
- /* clear data for chain noise calibration algorithm */
- data->chain_noise_a = 0;
- data->chain_noise_b = 0;
- data->chain_noise_c = 0;
- data->chain_signal_a = 0;
- data->chain_signal_b = 0;
- data->chain_signal_c = 0;
- data->beacon_count = 0;
-
- memset(&cmd, 0, sizeof(cmd));
- cmd.hdr.op_code = IWL_PHY_CALIBRATE_DIFF_GAIN_CMD;
- cmd.diff_gain_a = 0;
- cmd.diff_gain_b = 0;
- cmd.diff_gain_c = 0;
- if (iwl_send_cmd_pdu(priv, REPLY_PHY_CALIBRATION_CMD,
- sizeof(cmd), &cmd))
- IWL_ERR(priv,
- "Could not send REPLY_PHY_CALIBRATION_CMD\n");
- data->state = IWL_CHAIN_NOISE_ACCUMULATE;
- IWL_DEBUG_CALIB(priv, "Run chain_noise_calibrate\n");
- }
-}
-
-static void iwl4965_gain_computation(struct iwl_priv *priv,
- u32 *average_noise,
- u16 min_average_noise_antenna_i,
- u32 min_average_noise,
- u8 default_chain)
-{
- int i, ret;
- struct iwl_chain_noise_data *data = &priv->chain_noise_data;
-
- data->delta_gain_code[min_average_noise_antenna_i] = 0;
-
- for (i = default_chain; i < NUM_RX_CHAINS; i++) {
- s32 delta_g = 0;
-
- if (!(data->disconn_array[i]) &&
- (data->delta_gain_code[i] ==
- CHAIN_NOISE_DELTA_GAIN_INIT_VAL)) {
- delta_g = average_noise[i] - min_average_noise;
- data->delta_gain_code[i] = (u8)((delta_g * 10) / 15);
- data->delta_gain_code[i] =
- min(data->delta_gain_code[i],
- (u8) CHAIN_NOISE_MAX_DELTA_GAIN_CODE);
-
- data->delta_gain_code[i] =
- (data->delta_gain_code[i] | (1 << 2));
- } else {
- data->delta_gain_code[i] = 0;
- }
- }
- IWL_DEBUG_CALIB(priv, "delta_gain_codes: a %d b %d c %d\n",
- data->delta_gain_code[0],
- data->delta_gain_code[1],
- data->delta_gain_code[2]);
-
- /* Differential gain gets sent to uCode only once */
- if (!data->radio_write) {
- struct iwl_calib_diff_gain_cmd cmd;
- data->radio_write = 1;
-
- memset(&cmd, 0, sizeof(cmd));
- cmd.hdr.op_code = IWL_PHY_CALIBRATE_DIFF_GAIN_CMD;
- cmd.diff_gain_a = data->delta_gain_code[0];
- cmd.diff_gain_b = data->delta_gain_code[1];
- cmd.diff_gain_c = data->delta_gain_code[2];
- ret = iwl_send_cmd_pdu(priv, REPLY_PHY_CALIBRATION_CMD,
- sizeof(cmd), &cmd);
- if (ret)
- IWL_DEBUG_CALIB(priv, "fail sending cmd "
- "REPLY_PHY_CALIBRATION_CMD\n");
-
- /* TODO we might want recalculate
- * rx_chain in rxon cmd */
-
- /* Mark so we run this algo only once! */
- data->state = IWL_CHAIN_NOISE_CALIBRATED;
- }
-}
-
-static void iwl4965_bg_txpower_work(struct work_struct *work)
-{
- struct iwl_priv *priv = container_of(work, struct iwl_priv,
- txpower_work);
-
- /* If a scan happened to start before we got here
- * then just return; the statistics notification will
- * kick off another scheduled work to compensate for
- * any temperature delta we missed here. */
- if (test_bit(STATUS_EXIT_PENDING, &priv->status) ||
- test_bit(STATUS_SCANNING, &priv->status))
- return;
-
- mutex_lock(&priv->mutex);
-
- /* Regardless of if we are associated, we must reconfigure the
- * TX power since frames can be sent on non-radar channels while
- * not associated */
- iwl4965_send_tx_power(priv);
-
- /* Update last_temperature to keep is_calib_needed from running
- * when it isn't needed... */
- priv->last_temperature = priv->temperature;
-
- mutex_unlock(&priv->mutex);
-}
-
-/*
- * Acquire priv->lock before calling this function !
- */
-static void iwl4965_set_wr_ptrs(struct iwl_priv *priv, int txq_id, u32 index)
-{
- iwl_write_direct32(priv, HBUS_TARG_WRPTR,
- (index & 0xff) | (txq_id << 8));
- iwl_write_prph(priv, IWL49_SCD_QUEUE_RDPTR(txq_id), index);
-}
-
-/**
- * iwl4965_tx_queue_set_status - (optionally) start Tx/Cmd queue
- * @tx_fifo_id: Tx DMA/FIFO channel (range 0-7) that the queue will feed
- * @scd_retry: (1) Indicates queue will be used in aggregation mode
- *
- * NOTE: Acquire priv->lock before calling this function !
- */
-static void iwl4965_tx_queue_set_status(struct iwl_priv *priv,
- struct iwl_tx_queue *txq,
- int tx_fifo_id, int scd_retry)
-{
- int txq_id = txq->q.id;
-
- /* Find out whether to activate Tx queue */
- int active = test_bit(txq_id, &priv->txq_ctx_active_msk) ? 1 : 0;
-
- /* Set up and activate */
- iwl_write_prph(priv, IWL49_SCD_QUEUE_STATUS_BITS(txq_id),
- (active << IWL49_SCD_QUEUE_STTS_REG_POS_ACTIVE) |
- (tx_fifo_id << IWL49_SCD_QUEUE_STTS_REG_POS_TXF) |
- (scd_retry << IWL49_SCD_QUEUE_STTS_REG_POS_WSL) |
- (scd_retry << IWL49_SCD_QUEUE_STTS_REG_POS_SCD_ACK) |
- IWL49_SCD_QUEUE_STTS_REG_MSK);
-
- txq->sched_retry = scd_retry;
-
- IWL_DEBUG_INFO(priv, "%s %s Queue %d on AC %d\n",
- active ? "Activate" : "Deactivate",
- scd_retry ? "BA" : "AC", txq_id, tx_fifo_id);
-}
-
-static const s8 default_queue_to_tx_fifo[] = {
- IWL_TX_FIFO_VO,
- IWL_TX_FIFO_VI,
- IWL_TX_FIFO_BE,
- IWL_TX_FIFO_BK,
- IWL49_CMD_FIFO_NUM,
- IWL_TX_FIFO_UNUSED,
- IWL_TX_FIFO_UNUSED,
-};
-
-static int iwl4965_alive_notify(struct iwl_priv *priv)
-{
- u32 a;
- unsigned long flags;
- int i, chan;
- u32 reg_val;
-
- spin_lock_irqsave(&priv->lock, flags);
-
- /* Clear 4965's internal Tx Scheduler data base */
- priv->scd_base_addr = iwl_read_prph(priv, IWL49_SCD_SRAM_BASE_ADDR);
- a = priv->scd_base_addr + IWL49_SCD_CONTEXT_DATA_OFFSET;
- for (; a < priv->scd_base_addr + IWL49_SCD_TX_STTS_BITMAP_OFFSET; a += 4)
- iwl_write_targ_mem(priv, a, 0);
- for (; a < priv->scd_base_addr + IWL49_SCD_TRANSLATE_TBL_OFFSET; a += 4)
- iwl_write_targ_mem(priv, a, 0);
- for (; a < priv->scd_base_addr +
- IWL49_SCD_TRANSLATE_TBL_OFFSET_QUEUE(priv->hw_params.max_txq_num); a += 4)
- iwl_write_targ_mem(priv, a, 0);
-
- /* Tel 4965 where to find Tx byte count tables */
- iwl_write_prph(priv, IWL49_SCD_DRAM_BASE_ADDR,
- priv->scd_bc_tbls.dma >> 10);
-
- /* Enable DMA channel */
- for (chan = 0; chan < FH49_TCSR_CHNL_NUM ; chan++)
- iwl_write_direct32(priv, FH_TCSR_CHNL_TX_CONFIG_REG(chan),
- FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE |
- FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE);
-
- /* Update FH chicken bits */
- reg_val = iwl_read_direct32(priv, FH_TX_CHICKEN_BITS_REG);
- iwl_write_direct32(priv, FH_TX_CHICKEN_BITS_REG,
- reg_val | FH_TX_CHICKEN_BITS_SCD_AUTO_RETRY_EN);
-
- /* Disable chain mode for all queues */
- iwl_write_prph(priv, IWL49_SCD_QUEUECHAIN_SEL, 0);
-
- /* Initialize each Tx queue (including the command queue) */
- for (i = 0; i < priv->hw_params.max_txq_num; i++) {
-
- /* TFD circular buffer read/write indexes */
- iwl_write_prph(priv, IWL49_SCD_QUEUE_RDPTR(i), 0);
- iwl_write_direct32(priv, HBUS_TARG_WRPTR, 0 | (i << 8));
-
- /* Max Tx Window size for Scheduler-ACK mode */
- iwl_write_targ_mem(priv, priv->scd_base_addr +
- IWL49_SCD_CONTEXT_QUEUE_OFFSET(i),
- (SCD_WIN_SIZE <<
- IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_POS) &
- IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK);
-
- /* Frame limit */
- iwl_write_targ_mem(priv, priv->scd_base_addr +
- IWL49_SCD_CONTEXT_QUEUE_OFFSET(i) +
- sizeof(u32),
- (SCD_FRAME_LIMIT <<
- IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) &
- IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK);
-
- }
- iwl_write_prph(priv, IWL49_SCD_INTERRUPT_MASK,
- (1 << priv->hw_params.max_txq_num) - 1);
-
- /* Activate all Tx DMA/FIFO channels */
- priv->cfg->ops->lib->txq_set_sched(priv, IWL_MASK(0, 6));
-
- iwl4965_set_wr_ptrs(priv, IWL_DEFAULT_CMD_QUEUE_NUM, 0);
-
- /* make sure all queue are not stopped */
- memset(&priv->queue_stopped[0], 0, sizeof(priv->queue_stopped));
- for (i = 0; i < 4; i++)
- atomic_set(&priv->queue_stop_count[i], 0);
-
- /* reset to 0 to enable all the queue first */
- priv->txq_ctx_active_msk = 0;
- /* Map each Tx/cmd queue to its corresponding fifo */
- BUILD_BUG_ON(ARRAY_SIZE(default_queue_to_tx_fifo) != 7);
-
- for (i = 0; i < ARRAY_SIZE(default_queue_to_tx_fifo); i++) {
- int ac = default_queue_to_tx_fifo[i];
-
- iwl_txq_ctx_activate(priv, i);
-
- if (ac == IWL_TX_FIFO_UNUSED)
- continue;
-
- iwl4965_tx_queue_set_status(priv, &priv->txq[i], ac, 0);
- }
-
- spin_unlock_irqrestore(&priv->lock, flags);
-
- return 0;
-}
-
-static struct iwl_sensitivity_ranges iwl4965_sensitivity = {
- .min_nrg_cck = 97,
- .max_nrg_cck = 0, /* not used, set to 0 */
-
- .auto_corr_min_ofdm = 85,
- .auto_corr_min_ofdm_mrc = 170,
- .auto_corr_min_ofdm_x1 = 105,
- .auto_corr_min_ofdm_mrc_x1 = 220,
-
- .auto_corr_max_ofdm = 120,
- .auto_corr_max_ofdm_mrc = 210,
- .auto_corr_max_ofdm_x1 = 140,
- .auto_corr_max_ofdm_mrc_x1 = 270,
-
- .auto_corr_min_cck = 125,
- .auto_corr_max_cck = 200,
- .auto_corr_min_cck_mrc = 200,
- .auto_corr_max_cck_mrc = 400,
-
- .nrg_th_cck = 100,
- .nrg_th_ofdm = 100,
-
- .barker_corr_th_min = 190,
- .barker_corr_th_min_mrc = 390,
- .nrg_th_cca = 62,
-};
-
-static void iwl4965_set_ct_threshold(struct iwl_priv *priv)
-{
- /* want Kelvin */
- priv->hw_params.ct_kill_threshold =
- CELSIUS_TO_KELVIN(CT_KILL_THRESHOLD_LEGACY);
-}
-
-/**
- * iwl4965_hw_set_hw_params
- *
- * Called when initializing driver
- */
-static int iwl4965_hw_set_hw_params(struct iwl_priv *priv)
-{
- if (priv->cfg->mod_params->num_of_queues >= IWL_MIN_NUM_QUEUES &&
- priv->cfg->mod_params->num_of_queues <= IWL49_NUM_QUEUES)
- priv->cfg->base_params->num_of_queues =
- priv->cfg->mod_params->num_of_queues;
-
- priv->hw_params.max_txq_num = priv->cfg->base_params->num_of_queues;
- priv->hw_params.dma_chnl_num = FH49_TCSR_CHNL_NUM;
- priv->hw_params.scd_bc_tbls_size =
- priv->cfg->base_params->num_of_queues *
- sizeof(struct iwl4965_scd_bc_tbl);
- priv->hw_params.tfd_size = sizeof(struct iwl_tfd);
- priv->hw_params.max_stations = IWL4965_STATION_COUNT;
- priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id = IWL4965_BROADCAST_ID;
- priv->hw_params.max_data_size = IWL49_RTC_DATA_SIZE;
- priv->hw_params.max_inst_size = IWL49_RTC_INST_SIZE;
- priv->hw_params.max_bsm_size = BSM_SRAM_SIZE;
- priv->hw_params.ht40_channel = BIT(IEEE80211_BAND_5GHZ);
-
- priv->hw_params.rx_wrt_ptr_reg = FH_RSCSR_CHNL0_WPTR;
-
- priv->hw_params.tx_chains_num = num_of_ant(priv->cfg->valid_tx_ant);
- priv->hw_params.rx_chains_num = num_of_ant(priv->cfg->valid_rx_ant);
- priv->hw_params.valid_tx_ant = priv->cfg->valid_tx_ant;
- priv->hw_params.valid_rx_ant = priv->cfg->valid_rx_ant;
-
- iwl4965_set_ct_threshold(priv);
-
- priv->hw_params.sens = &iwl4965_sensitivity;
- priv->hw_params.beacon_time_tsf_bits = IWLAGN_EXT_BEACON_TIME_POS;
-
- return 0;
-}
-
-static s32 iwl4965_math_div_round(s32 num, s32 denom, s32 *res)
-{
- s32 sign = 1;
-
- if (num < 0) {
- sign = -sign;
- num = -num;
- }
- if (denom < 0) {
- sign = -sign;
- denom = -denom;
- }
- *res = 1;
- *res = ((num * 2 + denom) / (denom * 2)) * sign;
-
- return 1;
-}
-
-/**
- * iwl4965_get_voltage_compensation - Power supply voltage comp for txpower
- *
- * Determines power supply voltage compensation for txpower calculations.
- * Returns number of 1/2-dB steps to subtract from gain table index,
- * to compensate for difference between power supply voltage during
- * factory measurements, vs. current power supply voltage.
- *
- * Voltage indication is higher for lower voltage.
- * Lower voltage requires more gain (lower gain table index).
- */
-static s32 iwl4965_get_voltage_compensation(s32 eeprom_voltage,
- s32 current_voltage)
-{
- s32 comp = 0;
-
- if ((TX_POWER_IWL_ILLEGAL_VOLTAGE == eeprom_voltage) ||
- (TX_POWER_IWL_ILLEGAL_VOLTAGE == current_voltage))
- return 0;
-
- iwl4965_math_div_round(current_voltage - eeprom_voltage,
- TX_POWER_IWL_VOLTAGE_CODES_PER_03V, &comp);
-
- if (current_voltage > eeprom_voltage)
- comp *= 2;
- if ((comp < -2) || (comp > 2))
- comp = 0;
-
- return comp;
-}
-
-static s32 iwl4965_get_tx_atten_grp(u16 channel)
-{
- if (channel >= CALIB_IWL_TX_ATTEN_GR5_FCH &&
- channel <= CALIB_IWL_TX_ATTEN_GR5_LCH)
- return CALIB_CH_GROUP_5;
-
- if (channel >= CALIB_IWL_TX_ATTEN_GR1_FCH &&
- channel <= CALIB_IWL_TX_ATTEN_GR1_LCH)
- return CALIB_CH_GROUP_1;
-
- if (channel >= CALIB_IWL_TX_ATTEN_GR2_FCH &&
- channel <= CALIB_IWL_TX_ATTEN_GR2_LCH)
- return CALIB_CH_GROUP_2;
-
- if (channel >= CALIB_IWL_TX_ATTEN_GR3_FCH &&
- channel <= CALIB_IWL_TX_ATTEN_GR3_LCH)
- return CALIB_CH_GROUP_3;
-
- if (channel >= CALIB_IWL_TX_ATTEN_GR4_FCH &&
- channel <= CALIB_IWL_TX_ATTEN_GR4_LCH)
- return CALIB_CH_GROUP_4;
-
- return -1;
-}
-
-static u32 iwl4965_get_sub_band(const struct iwl_priv *priv, u32 channel)
-{
- s32 b = -1;
-
- for (b = 0; b < EEPROM_TX_POWER_BANDS; b++) {
- if (priv->calib_info->band_info[b].ch_from == 0)
- continue;
-
- if ((channel >= priv->calib_info->band_info[b].ch_from)
- && (channel <= priv->calib_info->band_info[b].ch_to))
- break;
- }
-
- return b;
-}
-
-static s32 iwl4965_interpolate_value(s32 x, s32 x1, s32 y1, s32 x2, s32 y2)
-{
- s32 val;
-
- if (x2 == x1)
- return y1;
- else {
- iwl4965_math_div_round((x2 - x) * (y1 - y2), (x2 - x1), &val);
- return val + y2;
- }
-}
-
-/**
- * iwl4965_interpolate_chan - Interpolate factory measurements for one channel
- *
- * Interpolates factory measurements from the two sample channels within a
- * sub-band, to apply to channel of interest. Interpolation is proportional to
- * differences in channel frequencies, which is proportional to differences
- * in channel number.
- */
-static int iwl4965_interpolate_chan(struct iwl_priv *priv, u32 channel,
- struct iwl_eeprom_calib_ch_info *chan_info)
-{
- s32 s = -1;
- u32 c;
- u32 m;
- const struct iwl_eeprom_calib_measure *m1;
- const struct iwl_eeprom_calib_measure *m2;
- struct iwl_eeprom_calib_measure *omeas;
- u32 ch_i1;
- u32 ch_i2;
-
- s = iwl4965_get_sub_band(priv, channel);
- if (s >= EEPROM_TX_POWER_BANDS) {
- IWL_ERR(priv, "Tx Power can not find channel %d\n", channel);
- return -1;
- }
-
- ch_i1 = priv->calib_info->band_info[s].ch1.ch_num;
- ch_i2 = priv->calib_info->band_info[s].ch2.ch_num;
- chan_info->ch_num = (u8) channel;
-
- IWL_DEBUG_TXPOWER(priv, "channel %d subband %d factory cal ch %d & %d\n",
- channel, s, ch_i1, ch_i2);
-
- for (c = 0; c < EEPROM_TX_POWER_TX_CHAINS; c++) {
- for (m = 0; m < EEPROM_TX_POWER_MEASUREMENTS; m++) {
- m1 = &(priv->calib_info->band_info[s].ch1.
- measurements[c][m]);
- m2 = &(priv->calib_info->band_info[s].ch2.
- measurements[c][m]);
- omeas = &(chan_info->measurements[c][m]);
-
- omeas->actual_pow =
- (u8) iwl4965_interpolate_value(channel, ch_i1,
- m1->actual_pow,
- ch_i2,
- m2->actual_pow);
- omeas->gain_idx =
- (u8) iwl4965_interpolate_value(channel, ch_i1,
- m1->gain_idx, ch_i2,
- m2->gain_idx);
- omeas->temperature =
- (u8) iwl4965_interpolate_value(channel, ch_i1,
- m1->temperature,
- ch_i2,
- m2->temperature);
- omeas->pa_det =
- (s8) iwl4965_interpolate_value(channel, ch_i1,
- m1->pa_det, ch_i2,
- m2->pa_det);
-
- IWL_DEBUG_TXPOWER(priv,
- "chain %d meas %d AP1=%d AP2=%d AP=%d\n", c, m,
- m1->actual_pow, m2->actual_pow, omeas->actual_pow);
- IWL_DEBUG_TXPOWER(priv,
- "chain %d meas %d NI1=%d NI2=%d NI=%d\n", c, m,
- m1->gain_idx, m2->gain_idx, omeas->gain_idx);
- IWL_DEBUG_TXPOWER(priv,
- "chain %d meas %d PA1=%d PA2=%d PA=%d\n", c, m,
- m1->pa_det, m2->pa_det, omeas->pa_det);
- IWL_DEBUG_TXPOWER(priv,
- "chain %d meas %d T1=%d T2=%d T=%d\n", c, m,
- m1->temperature, m2->temperature,
- omeas->temperature);
- }
- }
-
- return 0;
-}
-
-/* bit-rate-dependent table to prevent Tx distortion, in half-dB units,
- * for OFDM 6, 12, 18, 24, 36, 48, 54, 60 MBit, and CCK all rates. */
-static s32 back_off_table[] = {
- 10, 10, 10, 10, 10, 15, 17, 20, /* OFDM SISO 20 MHz */
- 10, 10, 10, 10, 10, 15, 17, 20, /* OFDM MIMO 20 MHz */
- 10, 10, 10, 10, 10, 15, 17, 20, /* OFDM SISO 40 MHz */
- 10, 10, 10, 10, 10, 15, 17, 20, /* OFDM MIMO 40 MHz */
- 10 /* CCK */
-};
-
-/* Thermal compensation values for txpower for various frequency ranges ...
- * ratios from 3:1 to 4.5:1 of degrees (Celsius) per half-dB gain adjust */
-static struct iwl4965_txpower_comp_entry {
- s32 degrees_per_05db_a;
- s32 degrees_per_05db_a_denom;
-} tx_power_cmp_tble[CALIB_CH_GROUP_MAX] = {
- {9, 2}, /* group 0 5.2, ch 34-43 */
- {4, 1}, /* group 1 5.2, ch 44-70 */
- {4, 1}, /* group 2 5.2, ch 71-124 */
- {4, 1}, /* group 3 5.2, ch 125-200 */
- {3, 1} /* group 4 2.4, ch all */
-};
-
-static s32 get_min_power_index(s32 rate_power_index, u32 band)
-{
- if (!band) {
- if ((rate_power_index & 7) <= 4)
- return MIN_TX_GAIN_INDEX_52GHZ_EXT;
- }
- return MIN_TX_GAIN_INDEX;
-}
-
-struct gain_entry {
- u8 dsp;
- u8 radio;
-};
-
-static const struct gain_entry gain_table[2][108] = {
- /* 5.2GHz power gain index table */
- {
- {123, 0x3F}, /* highest txpower */
- {117, 0x3F},
- {110, 0x3F},
- {104, 0x3F},
- {98, 0x3F},
- {110, 0x3E},
- {104, 0x3E},
- {98, 0x3E},
- {110, 0x3D},
- {104, 0x3D},
- {98, 0x3D},
- {110, 0x3C},
- {104, 0x3C},
- {98, 0x3C},
- {110, 0x3B},
- {104, 0x3B},
- {98, 0x3B},
- {110, 0x3A},
- {104, 0x3A},
- {98, 0x3A},
- {110, 0x39},
- {104, 0x39},
- {98, 0x39},
- {110, 0x38},
- {104, 0x38},
- {98, 0x38},
- {110, 0x37},
- {104, 0x37},
- {98, 0x37},
- {110, 0x36},
- {104, 0x36},
- {98, 0x36},
- {110, 0x35},
- {104, 0x35},
- {98, 0x35},
- {110, 0x34},
- {104, 0x34},
- {98, 0x34},
- {110, 0x33},
- {104, 0x33},
- {98, 0x33},
- {110, 0x32},
- {104, 0x32},
- {98, 0x32},
- {110, 0x31},
- {104, 0x31},
- {98, 0x31},
- {110, 0x30},
- {104, 0x30},
- {98, 0x30},
- {110, 0x25},
- {104, 0x25},
- {98, 0x25},
- {110, 0x24},
- {104, 0x24},
- {98, 0x24},
- {110, 0x23},
- {104, 0x23},
- {98, 0x23},
- {110, 0x22},
- {104, 0x18},
- {98, 0x18},
- {110, 0x17},
- {104, 0x17},
- {98, 0x17},
- {110, 0x16},
- {104, 0x16},
- {98, 0x16},
- {110, 0x15},
- {104, 0x15},
- {98, 0x15},
- {110, 0x14},
- {104, 0x14},
- {98, 0x14},
- {110, 0x13},
- {104, 0x13},
- {98, 0x13},
- {110, 0x12},
- {104, 0x08},
- {98, 0x08},
- {110, 0x07},
- {104, 0x07},
- {98, 0x07},
- {110, 0x06},
- {104, 0x06},
- {98, 0x06},
- {110, 0x05},
- {104, 0x05},
- {98, 0x05},
- {110, 0x04},
- {104, 0x04},
- {98, 0x04},
- {110, 0x03},
- {104, 0x03},
- {98, 0x03},
- {110, 0x02},
- {104, 0x02},
- {98, 0x02},
- {110, 0x01},
- {104, 0x01},
- {98, 0x01},
- {110, 0x00},
- {104, 0x00},
- {98, 0x00},
- {93, 0x00},
- {88, 0x00},
- {83, 0x00},
- {78, 0x00},
- },
- /* 2.4GHz power gain index table */
- {
- {110, 0x3f}, /* highest txpower */
- {104, 0x3f},
- {98, 0x3f},
- {110, 0x3e},
- {104, 0x3e},
- {98, 0x3e},
- {110, 0x3d},
- {104, 0x3d},
- {98, 0x3d},
- {110, 0x3c},
- {104, 0x3c},
- {98, 0x3c},
- {110, 0x3b},
- {104, 0x3b},
- {98, 0x3b},
- {110, 0x3a},
- {104, 0x3a},
- {98, 0x3a},
- {110, 0x39},
- {104, 0x39},
- {98, 0x39},
- {110, 0x38},
- {104, 0x38},
- {98, 0x38},
- {110, 0x37},
- {104, 0x37},
- {98, 0x37},
- {110, 0x36},
- {104, 0x36},
- {98, 0x36},
- {110, 0x35},
- {104, 0x35},
- {98, 0x35},
- {110, 0x34},
- {104, 0x34},
- {98, 0x34},
- {110, 0x33},
- {104, 0x33},
- {98, 0x33},
- {110, 0x32},
- {104, 0x32},
- {98, 0x32},
- {110, 0x31},
- {104, 0x31},
- {98, 0x31},
- {110, 0x30},
- {104, 0x30},
- {98, 0x30},
- {110, 0x6},
- {104, 0x6},
- {98, 0x6},
- {110, 0x5},
- {104, 0x5},
- {98, 0x5},
- {110, 0x4},
- {104, 0x4},
- {98, 0x4},
- {110, 0x3},
- {104, 0x3},
- {98, 0x3},
- {110, 0x2},
- {104, 0x2},
- {98, 0x2},
- {110, 0x1},
- {104, 0x1},
- {98, 0x1},
- {110, 0x0},
- {104, 0x0},
- {98, 0x0},
- {97, 0},
- {96, 0},
- {95, 0},
- {94, 0},
- {93, 0},
- {92, 0},
- {91, 0},
- {90, 0},
- {89, 0},
- {88, 0},
- {87, 0},
- {86, 0},
- {85, 0},
- {84, 0},
- {83, 0},
- {82, 0},
- {81, 0},
- {80, 0},
- {79, 0},
- {78, 0},
- {77, 0},
- {76, 0},
- {75, 0},
- {74, 0},
- {73, 0},
- {72, 0},
- {71, 0},
- {70, 0},
- {69, 0},
- {68, 0},
- {67, 0},
- {66, 0},
- {65, 0},
- {64, 0},
- {63, 0},
- {62, 0},
- {61, 0},
- {60, 0},
- {59, 0},
- }
-};
-
-static int iwl4965_fill_txpower_tbl(struct iwl_priv *priv, u8 band, u16 channel,
- u8 is_ht40, u8 ctrl_chan_high,
- struct iwl4965_tx_power_db *tx_power_tbl)
-{
- u8 saturation_power;
- s32 target_power;
- s32 user_target_power;
- s32 power_limit;
- s32 current_temp;
- s32 reg_limit;
- s32 current_regulatory;
- s32 txatten_grp = CALIB_CH_GROUP_MAX;
- int i;
- int c;
- const struct iwl_channel_info *ch_info = NULL;
- struct iwl_eeprom_calib_ch_info ch_eeprom_info;
- const struct iwl_eeprom_calib_measure *measurement;
- s16 voltage;
- s32 init_voltage;
- s32 voltage_compensation;
- s32 degrees_per_05db_num;
- s32 degrees_per_05db_denom;
- s32 factory_temp;
- s32 temperature_comp[2];
- s32 factory_gain_index[2];
- s32 factory_actual_pwr[2];
- s32 power_index;
-
- /* tx_power_user_lmt is in dBm, convert to half-dBm (half-dB units
- * are used for indexing into txpower table) */
- user_target_power = 2 * priv->tx_power_user_lmt;
-
- /* Get current (RXON) channel, band, width */
- IWL_DEBUG_TXPOWER(priv, "chan %d band %d is_ht40 %d\n", channel, band,
- is_ht40);
-
- ch_info = iwl_get_channel_info(priv, priv->band, channel);
-
- if (!is_channel_valid(ch_info))
- return -EINVAL;
-
- /* get txatten group, used to select 1) thermal txpower adjustment
- * and 2) mimo txpower balance between Tx chains. */
- txatten_grp = iwl4965_get_tx_atten_grp(channel);
- if (txatten_grp < 0) {
- IWL_ERR(priv, "Can't find txatten group for channel %d.\n",
- channel);
- return -EINVAL;
- }
-
- IWL_DEBUG_TXPOWER(priv, "channel %d belongs to txatten group %d\n",
- channel, txatten_grp);
-
- if (is_ht40) {
- if (ctrl_chan_high)
- channel -= 2;
- else
- channel += 2;
- }
-
- /* hardware txpower limits ...
- * saturation (clipping distortion) txpowers are in half-dBm */
- if (band)
- saturation_power = priv->calib_info->saturation_power24;
- else
- saturation_power = priv->calib_info->saturation_power52;
-
- if (saturation_power < IWL_TX_POWER_SATURATION_MIN ||
- saturation_power > IWL_TX_POWER_SATURATION_MAX) {
- if (band)
- saturation_power = IWL_TX_POWER_DEFAULT_SATURATION_24;
- else
- saturation_power = IWL_TX_POWER_DEFAULT_SATURATION_52;
- }
-
- /* regulatory txpower limits ... reg_limit values are in half-dBm,
- * max_power_avg values are in dBm, convert * 2 */
- if (is_ht40)
- reg_limit = ch_info->ht40_max_power_avg * 2;
- else
- reg_limit = ch_info->max_power_avg * 2;
-
- if ((reg_limit < IWL_TX_POWER_REGULATORY_MIN) ||
- (reg_limit > IWL_TX_POWER_REGULATORY_MAX)) {
- if (band)
- reg_limit = IWL_TX_POWER_DEFAULT_REGULATORY_24;
- else
- reg_limit = IWL_TX_POWER_DEFAULT_REGULATORY_52;
- }
-
- /* Interpolate txpower calibration values for this channel,
- * based on factory calibration tests on spaced channels. */
- iwl4965_interpolate_chan(priv, channel, &ch_eeprom_info);
-
- /* calculate tx gain adjustment based on power supply voltage */
- voltage = le16_to_cpu(priv->calib_info->voltage);
- init_voltage = (s32)le32_to_cpu(priv->card_alive_init.voltage);
- voltage_compensation =
- iwl4965_get_voltage_compensation(voltage, init_voltage);
-
- IWL_DEBUG_TXPOWER(priv, "curr volt %d eeprom volt %d volt comp %d\n",
- init_voltage,
- voltage, voltage_compensation);
-
- /* get current temperature (Celsius) */
- current_temp = max(priv->temperature, IWL_TX_POWER_TEMPERATURE_MIN);
- current_temp = min(priv->temperature, IWL_TX_POWER_TEMPERATURE_MAX);
- current_temp = KELVIN_TO_CELSIUS(current_temp);
-
- /* select thermal txpower adjustment params, based on channel group
- * (same frequency group used for mimo txatten adjustment) */
- degrees_per_05db_num =
- tx_power_cmp_tble[txatten_grp].degrees_per_05db_a;
- degrees_per_05db_denom =
- tx_power_cmp_tble[txatten_grp].degrees_per_05db_a_denom;
-
- /* get per-chain txpower values from factory measurements */
- for (c = 0; c < 2; c++) {
- measurement = &ch_eeprom_info.measurements[c][1];
-
- /* txgain adjustment (in half-dB steps) based on difference
- * between factory and current temperature */
- factory_temp = measurement->temperature;
- iwl4965_math_div_round((current_temp - factory_temp) *
- degrees_per_05db_denom,
- degrees_per_05db_num,
- &temperature_comp[c]);
-
- factory_gain_index[c] = measurement->gain_idx;
- factory_actual_pwr[c] = measurement->actual_pow;
-
- IWL_DEBUG_TXPOWER(priv, "chain = %d\n", c);
- IWL_DEBUG_TXPOWER(priv, "fctry tmp %d, "
- "curr tmp %d, comp %d steps\n",
- factory_temp, current_temp,
- temperature_comp[c]);
-
- IWL_DEBUG_TXPOWER(priv, "fctry idx %d, fctry pwr %d\n",
- factory_gain_index[c],
- factory_actual_pwr[c]);
- }
-
- /* for each of 33 bit-rates (including 1 for CCK) */
- for (i = 0; i < POWER_TABLE_NUM_ENTRIES; i++) {
- u8 is_mimo_rate;
- union iwl4965_tx_power_dual_stream tx_power;
-
- /* for mimo, reduce each chain's txpower by half
- * (3dB, 6 steps), so total output power is regulatory
- * compliant. */
- if (i & 0x8) {
- current_regulatory = reg_limit -
- IWL_TX_POWER_MIMO_REGULATORY_COMPENSATION;
- is_mimo_rate = 1;
- } else {
- current_regulatory = reg_limit;
- is_mimo_rate = 0;
- }
-
- /* find txpower limit, either hardware or regulatory */
- power_limit = saturation_power - back_off_table[i];
- if (power_limit > current_regulatory)
- power_limit = current_regulatory;
-
- /* reduce user's txpower request if necessary
- * for this rate on this channel */
- target_power = user_target_power;
- if (target_power > power_limit)
- target_power = power_limit;
-
- IWL_DEBUG_TXPOWER(priv, "rate %d sat %d reg %d usr %d tgt %d\n",
- i, saturation_power - back_off_table[i],
- current_regulatory, user_target_power,
- target_power);
-
- /* for each of 2 Tx chains (radio transmitters) */
- for (c = 0; c < 2; c++) {
- s32 atten_value;
-
- if (is_mimo_rate)
- atten_value =
- (s32)le32_to_cpu(priv->card_alive_init.
- tx_atten[txatten_grp][c]);
- else
- atten_value = 0;
-
- /* calculate index; higher index means lower txpower */
- power_index = (u8) (factory_gain_index[c] -
- (target_power -
- factory_actual_pwr[c]) -
- temperature_comp[c] -
- voltage_compensation +
- atten_value);
-
-/* IWL_DEBUG_TXPOWER(priv, "calculated txpower index %d\n",
- power_index); */
-
- if (power_index < get_min_power_index(i, band))
- power_index = get_min_power_index(i, band);
-
- /* adjust 5 GHz index to support negative indexes */
- if (!band)
- power_index += 9;
-
- /* CCK, rate 32, reduce txpower for CCK */
- if (i == POWER_TABLE_CCK_ENTRY)
- power_index +=
- IWL_TX_POWER_CCK_COMPENSATION_C_STEP;
-
- /* stay within the table! */
- if (power_index > 107) {
- IWL_WARN(priv, "txpower index %d > 107\n",
- power_index);
- power_index = 107;
- }
- if (power_index < 0) {
- IWL_WARN(priv, "txpower index %d < 0\n",
- power_index);
- power_index = 0;
- }
-
- /* fill txpower command for this rate/chain */
- tx_power.s.radio_tx_gain[c] =
- gain_table[band][power_index].radio;
- tx_power.s.dsp_predis_atten[c] =
- gain_table[band][power_index].dsp;
-
- IWL_DEBUG_TXPOWER(priv, "chain %d mimo %d index %d "
- "gain 0x%02x dsp %d\n",
- c, atten_value, power_index,
- tx_power.s.radio_tx_gain[c],
- tx_power.s.dsp_predis_atten[c]);
- } /* for each chain */
-
- tx_power_tbl->power_tbl[i].dw = cpu_to_le32(tx_power.dw);
-
- } /* for each rate */
-
- return 0;
-}
-
-/**
- * iwl4965_send_tx_power - Configure the TXPOWER level user limit
- *
- * Uses the active RXON for channel, band, and characteristics (ht40, high)
- * The power limit is taken from priv->tx_power_user_lmt.
- */
-static int iwl4965_send_tx_power(struct iwl_priv *priv)
-{
- struct iwl4965_txpowertable_cmd cmd = { 0 };
- int ret;
- u8 band = 0;
- bool is_ht40 = false;
- u8 ctrl_chan_high = 0;
- struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
-
- if (WARN_ONCE(test_bit(STATUS_SCAN_HW, &priv->status),
- "TX Power requested while scanning!\n"))
- return -EAGAIN;
-
- band = priv->band == IEEE80211_BAND_2GHZ;
-
- is_ht40 = is_ht40_channel(ctx->active.flags);
-
- if (is_ht40 && (ctx->active.flags & RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK))
- ctrl_chan_high = 1;
-
- cmd.band = band;
- cmd.channel = ctx->active.channel;
-
- ret = iwl4965_fill_txpower_tbl(priv, band,
- le16_to_cpu(ctx->active.channel),
- is_ht40, ctrl_chan_high, &cmd.tx_power);
- if (ret)
- goto out;
-
- ret = iwl_send_cmd_pdu(priv, REPLY_TX_PWR_TABLE_CMD, sizeof(cmd), &cmd);
-
-out:
- return ret;
-}
-
-static int iwl4965_send_rxon_assoc(struct iwl_priv *priv,
- struct iwl_rxon_context *ctx)
-{
- int ret = 0;
- struct iwl4965_rxon_assoc_cmd rxon_assoc;
- const struct iwl_rxon_cmd *rxon1 = &ctx->staging;
- const struct iwl_rxon_cmd *rxon2 = &ctx->active;
-
- if ((rxon1->flags == rxon2->flags) &&
- (rxon1->filter_flags == rxon2->filter_flags) &&
- (rxon1->cck_basic_rates == rxon2->cck_basic_rates) &&
- (rxon1->ofdm_ht_single_stream_basic_rates ==
- rxon2->ofdm_ht_single_stream_basic_rates) &&
- (rxon1->ofdm_ht_dual_stream_basic_rates ==
- rxon2->ofdm_ht_dual_stream_basic_rates) &&
- (rxon1->rx_chain == rxon2->rx_chain) &&
- (rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates)) {
- IWL_DEBUG_INFO(priv, "Using current RXON_ASSOC. Not resending.\n");
- return 0;
- }
-
- rxon_assoc.flags = ctx->staging.flags;
- rxon_assoc.filter_flags = ctx->staging.filter_flags;
- rxon_assoc.ofdm_basic_rates = ctx->staging.ofdm_basic_rates;
- rxon_assoc.cck_basic_rates = ctx->staging.cck_basic_rates;
- rxon_assoc.reserved = 0;
- rxon_assoc.ofdm_ht_single_stream_basic_rates =
- ctx->staging.ofdm_ht_single_stream_basic_rates;
- rxon_assoc.ofdm_ht_dual_stream_basic_rates =
- ctx->staging.ofdm_ht_dual_stream_basic_rates;
- rxon_assoc.rx_chain_select_flags = ctx->staging.rx_chain;
-
- ret = iwl_send_cmd_pdu_async(priv, REPLY_RXON_ASSOC,
- sizeof(rxon_assoc), &rxon_assoc, NULL);
- if (ret)
- return ret;
-
- return ret;
-}
-
-static int iwl4965_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
-{
- /* cast away the const for active_rxon in this function */
- struct iwl_rxon_cmd *active_rxon = (void *)&ctx->active;
- int ret;
- bool new_assoc =
- !!(ctx->staging.filter_flags & RXON_FILTER_ASSOC_MSK);
-
- if (!iwl_is_alive(priv))
- return -EBUSY;
-
- if (!ctx->is_active)
- return 0;
-
- /* always get timestamp with Rx frame */
- ctx->staging.flags |= RXON_FLG_TSF2HOST_MSK;
-
- ret = iwl_check_rxon_cmd(priv, ctx);
- if (ret) {
- IWL_ERR(priv, "Invalid RXON configuration. Not committing.\n");
- return -EINVAL;
- }
-
- /*
- * receive commit_rxon request
- * abort any previous channel switch if still in process
- */
- if (priv->switch_rxon.switch_in_progress &&
- (priv->switch_rxon.channel != ctx->staging.channel)) {
- IWL_DEBUG_11H(priv, "abort channel switch on %d\n",
- le16_to_cpu(priv->switch_rxon.channel));
- iwl_chswitch_done(priv, false);
- }
-
- /* If we don't need to send a full RXON, we can use
- * iwl_rxon_assoc_cmd which is used to reconfigure filter
- * and other flags for the current radio configuration. */
- if (!iwl_full_rxon_required(priv, ctx)) {
- ret = iwl_send_rxon_assoc(priv, ctx);
- if (ret) {
- IWL_ERR(priv, "Error setting RXON_ASSOC (%d)\n", ret);
- return ret;
- }
-
- memcpy(active_rxon, &ctx->staging, sizeof(*active_rxon));
- iwl_print_rx_config_cmd(priv, ctx);
- return 0;
- }
-
- /* If we are currently associated and the new config requires
- * an RXON_ASSOC and the new config wants the associated mask enabled,
- * we must clear the associated from the active configuration
- * before we apply the new config */
- if (iwl_is_associated_ctx(ctx) && new_assoc) {
- IWL_DEBUG_INFO(priv, "Toggling associated bit on current RXON\n");
- active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
-
- ret = iwl_send_cmd_pdu(priv, ctx->rxon_cmd,
- sizeof(struct iwl_rxon_cmd),
- active_rxon);
-
- /* If the mask clearing failed then we set
- * active_rxon back to what it was previously */
- if (ret) {
- active_rxon->filter_flags |= RXON_FILTER_ASSOC_MSK;
- IWL_ERR(priv, "Error clearing ASSOC_MSK (%d)\n", ret);
- return ret;
- }
- iwl_clear_ucode_stations(priv, ctx);
- iwl_restore_stations(priv, ctx);
- ret = iwl_restore_default_wep_keys(priv, ctx);
- if (ret) {
- IWL_ERR(priv, "Failed to restore WEP keys (%d)\n", ret);
- return ret;
- }
- }
-
- IWL_DEBUG_INFO(priv, "Sending RXON\n"
- "* with%s RXON_FILTER_ASSOC_MSK\n"
- "* channel = %d\n"
- "* bssid = %pM\n",
- (new_assoc ? "" : "out"),
- le16_to_cpu(ctx->staging.channel),
- ctx->staging.bssid_addr);
-
- iwl_set_rxon_hwcrypto(priv, ctx, !priv->cfg->mod_params->sw_crypto);
-
- /* Apply the new configuration
- * RXON unassoc clears the station table in uCode so restoration of
- * stations is needed after it (the RXON command) completes
- */
- if (!new_assoc) {
- ret = iwl_send_cmd_pdu(priv, ctx->rxon_cmd,
- sizeof(struct iwl_rxon_cmd), &ctx->staging);
- if (ret) {
- IWL_ERR(priv, "Error setting new RXON (%d)\n", ret);
- return ret;
- }
- IWL_DEBUG_INFO(priv, "Return from !new_assoc RXON.\n");
- memcpy(active_rxon, &ctx->staging, sizeof(*active_rxon));
- iwl_clear_ucode_stations(priv, ctx);
- iwl_restore_stations(priv, ctx);
- ret = iwl_restore_default_wep_keys(priv, ctx);
- if (ret) {
- IWL_ERR(priv, "Failed to restore WEP keys (%d)\n", ret);
- return ret;
- }
- }
- if (new_assoc) {
- priv->start_calib = 0;
- /* Apply the new configuration
- * RXON assoc doesn't clear the station table in uCode,
- */
- ret = iwl_send_cmd_pdu(priv, ctx->rxon_cmd,
- sizeof(struct iwl_rxon_cmd), &ctx->staging);
- if (ret) {
- IWL_ERR(priv, "Error setting new RXON (%d)\n", ret);
- return ret;
- }
- memcpy(active_rxon, &ctx->staging, sizeof(*active_rxon));
- }
- iwl_print_rx_config_cmd(priv, ctx);
-
- iwl_init_sensitivity(priv);
-
- /* If we issue a new RXON command which required a tune then we must
- * send a new TXPOWER command or we won't be able to Tx any frames */
- ret = iwl_set_tx_power(priv, priv->tx_power_next, true);
- if (ret) {
- IWL_ERR(priv, "Error sending TX power (%d)\n", ret);
- return ret;
- }
-
- return 0;
-}
-
-static int iwl4965_hw_channel_switch(struct iwl_priv *priv,
- struct ieee80211_channel_switch *ch_switch)
-{
- struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
- int rc;
- u8 band = 0;
- bool is_ht40 = false;
- u8 ctrl_chan_high = 0;
- struct iwl4965_channel_switch_cmd cmd;
- const struct iwl_channel_info *ch_info;
- u32 switch_time_in_usec, ucode_switch_time;
- u16 ch;
- u32 tsf_low;
- u8 switch_count;
- u16 beacon_interval = le16_to_cpu(ctx->timing.beacon_interval);
- struct ieee80211_vif *vif = ctx->vif;
- band = priv->band == IEEE80211_BAND_2GHZ;
-
- is_ht40 = is_ht40_channel(ctx->staging.flags);
-
- if (is_ht40 &&
- (ctx->staging.flags & RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK))
- ctrl_chan_high = 1;
-
- cmd.band = band;
- cmd.expect_beacon = 0;
- ch = ch_switch->channel->hw_value;
- cmd.channel = cpu_to_le16(ch);
- cmd.rxon_flags = ctx->staging.flags;
- cmd.rxon_filter_flags = ctx->staging.filter_flags;
- switch_count = ch_switch->count;
- tsf_low = ch_switch->timestamp & 0x0ffffffff;
- /*
- * calculate the ucode channel switch time
- * adding TSF as one of the factor for when to switch
- */
- if ((priv->ucode_beacon_time > tsf_low) && beacon_interval) {
- if (switch_count > ((priv->ucode_beacon_time - tsf_low) /
- beacon_interval)) {
- switch_count -= (priv->ucode_beacon_time -
- tsf_low) / beacon_interval;
- } else
- switch_count = 0;
- }
- if (switch_count <= 1)
- cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time);
- else {
- switch_time_in_usec =
- vif->bss_conf.beacon_int * switch_count * TIME_UNIT;
- ucode_switch_time = iwl_usecs_to_beacons(priv,
- switch_time_in_usec,
- beacon_interval);
- cmd.switch_time = iwl_add_beacon_time(priv,
- priv->ucode_beacon_time,
- ucode_switch_time,
- beacon_interval);
- }
- IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n",
- cmd.switch_time);
- ch_info = iwl_get_channel_info(priv, priv->band, ch);
- if (ch_info)
- cmd.expect_beacon = is_channel_radar(ch_info);
- else {
- IWL_ERR(priv, "invalid channel switch from %u to %u\n",
- ctx->active.channel, ch);
- return -EFAULT;
- }
-
- rc = iwl4965_fill_txpower_tbl(priv, band, ch, is_ht40,
- ctrl_chan_high, &cmd.tx_power);
- if (rc) {
- IWL_DEBUG_11H(priv, "error:%d fill txpower_tbl\n", rc);
- return rc;
- }
-
- priv->switch_rxon.channel = cmd.channel;
- priv->switch_rxon.switch_in_progress = true;
-
- return iwl_send_cmd_pdu(priv, REPLY_CHANNEL_SWITCH, sizeof(cmd), &cmd);
-}
-
-/**
- * iwl4965_txq_update_byte_cnt_tbl - Set up entry in Tx byte-count array
- */
-static void iwl4965_txq_update_byte_cnt_tbl(struct iwl_priv *priv,
- struct iwl_tx_queue *txq,
- u16 byte_cnt)
-{
- struct iwl4965_scd_bc_tbl *scd_bc_tbl = priv->scd_bc_tbls.addr;
- int txq_id = txq->q.id;
- int write_ptr = txq->q.write_ptr;
- int len = byte_cnt + IWL_TX_CRC_SIZE + IWL_TX_DELIMITER_SIZE;
- __le16 bc_ent;
-
- WARN_ON(len > 0xFFF || write_ptr >= TFD_QUEUE_SIZE_MAX);
-
- bc_ent = cpu_to_le16(len & 0xFFF);
- /* Set up byte count within first 256 entries */
- scd_bc_tbl[txq_id].tfd_offset[write_ptr] = bc_ent;
-
- /* If within first 64 entries, duplicate at end */
- if (write_ptr < TFD_QUEUE_SIZE_BC_DUP)
- scd_bc_tbl[txq_id].
- tfd_offset[TFD_QUEUE_SIZE_MAX + write_ptr] = bc_ent;
-}
-
-/**
- * iwl4965_hw_get_temperature - return the calibrated temperature (in Kelvin)
- * @statistics: Provides the temperature reading from the uCode
- *
- * A return of <0 indicates bogus data in the statistics
- */
-static int iwl4965_hw_get_temperature(struct iwl_priv *priv)
-{
- s32 temperature;
- s32 vt;
- s32 R1, R2, R3;
- u32 R4;
-
- if (test_bit(STATUS_TEMPERATURE, &priv->status) &&
- (priv->_agn.statistics.flag &
- STATISTICS_REPLY_FLG_HT40_MODE_MSK)) {
- IWL_DEBUG_TEMP(priv, "Running HT40 temperature calibration\n");
- R1 = (s32)le32_to_cpu(priv->card_alive_init.therm_r1[1]);
- R2 = (s32)le32_to_cpu(priv->card_alive_init.therm_r2[1]);
- R3 = (s32)le32_to_cpu(priv->card_alive_init.therm_r3[1]);
- R4 = le32_to_cpu(priv->card_alive_init.therm_r4[1]);
- } else {
- IWL_DEBUG_TEMP(priv, "Running temperature calibration\n");
- R1 = (s32)le32_to_cpu(priv->card_alive_init.therm_r1[0]);
- R2 = (s32)le32_to_cpu(priv->card_alive_init.therm_r2[0]);
- R3 = (s32)le32_to_cpu(priv->card_alive_init.therm_r3[0]);
- R4 = le32_to_cpu(priv->card_alive_init.therm_r4[0]);
- }
-
- /*
- * Temperature is only 23 bits, so sign extend out to 32.
- *
- * NOTE If we haven't received a statistics notification yet
- * with an updated temperature, use R4 provided to us in the
- * "initialize" ALIVE response.
- */
- if (!test_bit(STATUS_TEMPERATURE, &priv->status))
- vt = sign_extend32(R4, 23);
- else
- vt = sign_extend32(le32_to_cpu(priv->_agn.statistics.
- general.common.temperature), 23);
-
- IWL_DEBUG_TEMP(priv, "Calib values R[1-3]: %d %d %d R4: %d\n", R1, R2, R3, vt);
-
- if (R3 == R1) {
- IWL_ERR(priv, "Calibration conflict R1 == R3\n");
- return -1;
- }
-
- /* Calculate temperature in degrees Kelvin, adjust by 97%.
- * Add offset to center the adjustment around 0 degrees Centigrade. */
- temperature = TEMPERATURE_CALIB_A_VAL * (vt - R2);
- temperature /= (R3 - R1);
- temperature = (temperature * 97) / 100 + TEMPERATURE_CALIB_KELVIN_OFFSET;
-
- IWL_DEBUG_TEMP(priv, "Calibrated temperature: %dK, %dC\n",
- temperature, KELVIN_TO_CELSIUS(temperature));
-
- return temperature;
-}
-
-/* Adjust Txpower only if temperature variance is greater than threshold. */
-#define IWL_TEMPERATURE_THRESHOLD 3
-
-/**
- * iwl4965_is_temp_calib_needed - determines if new calibration is needed
- *
- * If the temperature changed has changed sufficiently, then a recalibration
- * is needed.
- *
- * Assumes caller will replace priv->last_temperature once calibration
- * executed.
- */
-static int iwl4965_is_temp_calib_needed(struct iwl_priv *priv)
-{
- int temp_diff;
-
- if (!test_bit(STATUS_STATISTICS, &priv->status)) {
- IWL_DEBUG_TEMP(priv, "Temperature not updated -- no statistics.\n");
- return 0;
- }
-
- temp_diff = priv->temperature - priv->last_temperature;
-
- /* get absolute value */
- if (temp_diff < 0) {
- IWL_DEBUG_POWER(priv, "Getting cooler, delta %d\n", temp_diff);
- temp_diff = -temp_diff;
- } else if (temp_diff == 0)
- IWL_DEBUG_POWER(priv, "Temperature unchanged\n");
- else
- IWL_DEBUG_POWER(priv, "Getting warmer, delta %d\n", temp_diff);
-
- if (temp_diff < IWL_TEMPERATURE_THRESHOLD) {
- IWL_DEBUG_POWER(priv, " => thermal txpower calib not needed\n");
- return 0;
- }
-
- IWL_DEBUG_POWER(priv, " => thermal txpower calib needed\n");
-
- return 1;
-}
-
-static void iwl4965_temperature_calib(struct iwl_priv *priv)
-{
- s32 temp;
-
- temp = iwl4965_hw_get_temperature(priv);
- if (temp < 0)
- return;
-
- if (priv->temperature != temp) {
- if (priv->temperature)
- IWL_DEBUG_TEMP(priv, "Temperature changed "
- "from %dC to %dC\n",
- KELVIN_TO_CELSIUS(priv->temperature),
- KELVIN_TO_CELSIUS(temp));
- else
- IWL_DEBUG_TEMP(priv, "Temperature "
- "initialized to %dC\n",
- KELVIN_TO_CELSIUS(temp));
- }
-
- priv->temperature = temp;
- iwl_tt_handler(priv);
- set_bit(STATUS_TEMPERATURE, &priv->status);
-
- if (!priv->disable_tx_power_cal &&
- unlikely(!test_bit(STATUS_SCANNING, &priv->status)) &&
- iwl4965_is_temp_calib_needed(priv))
- queue_work(priv->workqueue, &priv->txpower_work);
-}
-
-/**
- * iwl4965_tx_queue_stop_scheduler - Stop queue, but keep configuration
- */
-static void iwl4965_tx_queue_stop_scheduler(struct iwl_priv *priv,
- u16 txq_id)
-{
- /* Simply stop the queue, but don't change any configuration;
- * the SCD_ACT_EN bit is the write-enable mask for the ACTIVE bit. */
- iwl_write_prph(priv,
- IWL49_SCD_QUEUE_STATUS_BITS(txq_id),
- (0 << IWL49_SCD_QUEUE_STTS_REG_POS_ACTIVE)|
- (1 << IWL49_SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN));
-}
-
-/**
- * txq_id must be greater than IWL49_FIRST_AMPDU_QUEUE
- * priv->lock must be held by the caller
- */
-static int iwl4965_txq_agg_disable(struct iwl_priv *priv, u16 txq_id,
- u16 ssn_idx, u8 tx_fifo)
-{
- if ((IWL49_FIRST_AMPDU_QUEUE > txq_id) ||
- (IWL49_FIRST_AMPDU_QUEUE +
- priv->cfg->base_params->num_of_ampdu_queues <= txq_id)) {
- IWL_WARN(priv,
- "queue number out of range: %d, must be %d to %d\n",
- txq_id, IWL49_FIRST_AMPDU_QUEUE,
- IWL49_FIRST_AMPDU_QUEUE +
- priv->cfg->base_params->num_of_ampdu_queues - 1);
- return -EINVAL;
- }
-
- iwl4965_tx_queue_stop_scheduler(priv, txq_id);
-
- iwl_clear_bits_prph(priv, IWL49_SCD_QUEUECHAIN_SEL, (1 << txq_id));
-
- priv->txq[txq_id].q.read_ptr = (ssn_idx & 0xff);
- priv->txq[txq_id].q.write_ptr = (ssn_idx & 0xff);
- /* supposes that ssn_idx is valid (!= 0xFFF) */
- iwl4965_set_wr_ptrs(priv, txq_id, ssn_idx);
-
- iwl_clear_bits_prph(priv, IWL49_SCD_INTERRUPT_MASK, (1 << txq_id));
- iwl_txq_ctx_deactivate(priv, txq_id);
- iwl4965_tx_queue_set_status(priv, &priv->txq[txq_id], tx_fifo, 0);
-
- return 0;
-}
-
-/**
- * iwl4965_tx_queue_set_q2ratid - Map unique receiver/tid combination to a queue
- */
-static int iwl4965_tx_queue_set_q2ratid(struct iwl_priv *priv, u16 ra_tid,
- u16 txq_id)
-{
- u32 tbl_dw_addr;
- u32 tbl_dw;
- u16 scd_q2ratid;
-
- scd_q2ratid = ra_tid & IWL_SCD_QUEUE_RA_TID_MAP_RATID_MSK;
-
- tbl_dw_addr = priv->scd_base_addr +
- IWL49_SCD_TRANSLATE_TBL_OFFSET_QUEUE(txq_id);
-
- tbl_dw = iwl_read_targ_mem(priv, tbl_dw_addr);
-
- if (txq_id & 0x1)
- tbl_dw = (scd_q2ratid << 16) | (tbl_dw & 0x0000FFFF);
- else
- tbl_dw = scd_q2ratid | (tbl_dw & 0xFFFF0000);
-
- iwl_write_targ_mem(priv, tbl_dw_addr, tbl_dw);
-
- return 0;
-}
-
-
-/**
- * iwl4965_tx_queue_agg_enable - Set up & enable aggregation for selected queue
- *
- * NOTE: txq_id must be greater than IWL49_FIRST_AMPDU_QUEUE,
- * i.e. it must be one of the higher queues used for aggregation
- */
-static int iwl4965_txq_agg_enable(struct iwl_priv *priv, int txq_id,
- int tx_fifo, int sta_id, int tid, u16 ssn_idx)
-{
- unsigned long flags;
- u16 ra_tid;
- int ret;
-
- if ((IWL49_FIRST_AMPDU_QUEUE > txq_id) ||
- (IWL49_FIRST_AMPDU_QUEUE +
- priv->cfg->base_params->num_of_ampdu_queues <= txq_id)) {
- IWL_WARN(priv,
- "queue number out of range: %d, must be %d to %d\n",
- txq_id, IWL49_FIRST_AMPDU_QUEUE,
- IWL49_FIRST_AMPDU_QUEUE +
- priv->cfg->base_params->num_of_ampdu_queues - 1);
- return -EINVAL;
- }
-
- ra_tid = BUILD_RAxTID(sta_id, tid);
-
- /* Modify device's station table to Tx this TID */
- ret = iwl_sta_tx_modify_enable_tid(priv, sta_id, tid);
- if (ret)
- return ret;
-
- spin_lock_irqsave(&priv->lock, flags);
-
- /* Stop this Tx queue before configuring it */
- iwl4965_tx_queue_stop_scheduler(priv, txq_id);
-
- /* Map receiver-address / traffic-ID to this queue */
- iwl4965_tx_queue_set_q2ratid(priv, ra_tid, txq_id);
-
- /* Set this queue as a chain-building queue */
- iwl_set_bits_prph(priv, IWL49_SCD_QUEUECHAIN_SEL, (1 << txq_id));
-
- /* Place first TFD at index corresponding to start sequence number.
- * Assumes that ssn_idx is valid (!= 0xFFF) */
- priv->txq[txq_id].q.read_ptr = (ssn_idx & 0xff);
- priv->txq[txq_id].q.write_ptr = (ssn_idx & 0xff);
- iwl4965_set_wr_ptrs(priv, txq_id, ssn_idx);
-
- /* Set up Tx window size and frame limit for this queue */
- iwl_write_targ_mem(priv,
- priv->scd_base_addr + IWL49_SCD_CONTEXT_QUEUE_OFFSET(txq_id),
- (SCD_WIN_SIZE << IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_POS) &
- IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK);
-
- iwl_write_targ_mem(priv, priv->scd_base_addr +
- IWL49_SCD_CONTEXT_QUEUE_OFFSET(txq_id) + sizeof(u32),
- (SCD_FRAME_LIMIT << IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS)
- & IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK);
-
- iwl_set_bits_prph(priv, IWL49_SCD_INTERRUPT_MASK, (1 << txq_id));
-
- /* Set up Status area in SRAM, map to Tx DMA/FIFO, activate the queue */
- iwl4965_tx_queue_set_status(priv, &priv->txq[txq_id], tx_fifo, 1);
-
- spin_unlock_irqrestore(&priv->lock, flags);
-
- return 0;
-}
-
-
-static u16 iwl4965_get_hcmd_size(u8 cmd_id, u16 len)
-{
- switch (cmd_id) {
- case REPLY_RXON:
- return (u16) sizeof(struct iwl4965_rxon_cmd);
- default:
- return len;
- }
-}
-
-static u16 iwl4965_build_addsta_hcmd(const struct iwl_addsta_cmd *cmd, u8 *data)
-{
- struct iwl4965_addsta_cmd *addsta = (struct iwl4965_addsta_cmd *)data;
- addsta->mode = cmd->mode;
- memcpy(&addsta->sta, &cmd->sta, sizeof(struct sta_id_modify));
- memcpy(&addsta->key, &cmd->key, sizeof(struct iwl4965_keyinfo));
- addsta->station_flags = cmd->station_flags;
- addsta->station_flags_msk = cmd->station_flags_msk;
- addsta->tid_disable_tx = cmd->tid_disable_tx;
- addsta->add_immediate_ba_tid = cmd->add_immediate_ba_tid;
- addsta->remove_immediate_ba_tid = cmd->remove_immediate_ba_tid;
- addsta->add_immediate_ba_ssn = cmd->add_immediate_ba_ssn;
- addsta->sleep_tx_count = cmd->sleep_tx_count;
- addsta->reserved1 = cpu_to_le16(0);
- addsta->reserved2 = cpu_to_le16(0);
-
- return (u16)sizeof(struct iwl4965_addsta_cmd);
-}
-
-static inline u32 iwl4965_get_scd_ssn(struct iwl4965_tx_resp *tx_resp)
-{
- return le32_to_cpup(&tx_resp->u.status + tx_resp->frame_count) & MAX_SN;
-}
-
-/**
- * iwl4965_tx_status_reply_tx - Handle Tx response for frames in aggregation queue
- */
-static int iwl4965_tx_status_reply_tx(struct iwl_priv *priv,
- struct iwl_ht_agg *agg,
- struct iwl4965_tx_resp *tx_resp,
- int txq_id, u16 start_idx)
-{
- u16 status;
- struct agg_tx_status *frame_status = tx_resp->u.agg_status;
- struct ieee80211_tx_info *info = NULL;
- struct ieee80211_hdr *hdr = NULL;
- u32 rate_n_flags = le32_to_cpu(tx_resp->rate_n_flags);
- int i, sh, idx;
- u16 seq;
- if (agg->wait_for_ba)
- IWL_DEBUG_TX_REPLY(priv, "got tx response w/o block-ack\n");
-
- agg->frame_count = tx_resp->frame_count;
- agg->start_idx = start_idx;
- agg->rate_n_flags = rate_n_flags;
- agg->bitmap = 0;
-
- /* num frames attempted by Tx command */
- if (agg->frame_count == 1) {
- /* Only one frame was attempted; no block-ack will arrive */
- status = le16_to_cpu(frame_status[0].status);
- idx = start_idx;
-
- /* FIXME: code repetition */
- IWL_DEBUG_TX_REPLY(priv, "FrameCnt = %d, StartIdx=%d idx=%d\n",
- agg->frame_count, agg->start_idx, idx);
-
- info = IEEE80211_SKB_CB(priv->txq[txq_id].txb[idx].skb);
- info->status.rates[0].count = tx_resp->failure_frame + 1;
- info->flags &= ~IEEE80211_TX_CTL_AMPDU;
- info->flags |= iwl_tx_status_to_mac80211(status);
- iwlagn_hwrate_to_tx_control(priv, rate_n_flags, info);
- /* FIXME: code repetition end */
-
- IWL_DEBUG_TX_REPLY(priv, "1 Frame 0x%x failure :%d\n",
- status & 0xff, tx_resp->failure_frame);
- IWL_DEBUG_TX_REPLY(priv, "Rate Info rate_n_flags=%x\n", rate_n_flags);
-
- agg->wait_for_ba = 0;
- } else {
- /* Two or more frames were attempted; expect block-ack */
- u64 bitmap = 0;
- int start = agg->start_idx;
-
- /* Construct bit-map of pending frames within Tx window */
- for (i = 0; i < agg->frame_count; i++) {
- u16 sc;
- status = le16_to_cpu(frame_status[i].status);
- seq = le16_to_cpu(frame_status[i].sequence);
- idx = SEQ_TO_INDEX(seq);
- txq_id = SEQ_TO_QUEUE(seq);
-
- if (status & (AGG_TX_STATE_FEW_BYTES_MSK |
- AGG_TX_STATE_ABORT_MSK))
- continue;
-
- IWL_DEBUG_TX_REPLY(priv, "FrameCnt = %d, txq_id=%d idx=%d\n",
- agg->frame_count, txq_id, idx);
-
- hdr = iwl_tx_queue_get_hdr(priv, txq_id, idx);
- if (!hdr) {
- IWL_ERR(priv,
- "BUG_ON idx doesn't point to valid skb"
- " idx=%d, txq_id=%d\n", idx, txq_id);
- return -1;
- }
-
- sc = le16_to_cpu(hdr->seq_ctrl);
- if (idx != (SEQ_TO_SN(sc) & 0xff)) {
- IWL_ERR(priv,
- "BUG_ON idx doesn't match seq control"
- " idx=%d, seq_idx=%d, seq=%d\n",
- idx, SEQ_TO_SN(sc), hdr->seq_ctrl);
- return -1;
- }
-
- IWL_DEBUG_TX_REPLY(priv, "AGG Frame i=%d idx %d seq=%d\n",
- i, idx, SEQ_TO_SN(sc));
-
- sh = idx - start;
- if (sh > 64) {
- sh = (start - idx) + 0xff;
- bitmap = bitmap << sh;
- sh = 0;
- start = idx;
- } else if (sh < -64)
- sh = 0xff - (start - idx);
- else if (sh < 0) {
- sh = start - idx;
- start = idx;
- bitmap = bitmap << sh;
- sh = 0;
- }
- bitmap |= 1ULL << sh;
- IWL_DEBUG_TX_REPLY(priv, "start=%d bitmap=0x%llx\n",
- start, (unsigned long long)bitmap);
- }
-
- agg->bitmap = bitmap;
- agg->start_idx = start;
- IWL_DEBUG_TX_REPLY(priv, "Frames %d start_idx=%d bitmap=0x%llx\n",
- agg->frame_count, agg->start_idx,
- (unsigned long long)agg->bitmap);
-
- if (bitmap)
- agg->wait_for_ba = 1;
- }
- return 0;
-}
-
-static u8 iwl_find_station(struct iwl_priv *priv, const u8 *addr)
-{
- int i;
- int start = 0;
- int ret = IWL_INVALID_STATION;
- unsigned long flags;
-
- if ((priv->iw_mode == NL80211_IFTYPE_ADHOC) ||
- (priv->iw_mode == NL80211_IFTYPE_AP))
- start = IWL_STA_ID;
-
- if (is_broadcast_ether_addr(addr))
- return priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id;
-
- spin_lock_irqsave(&priv->sta_lock, flags);
- for (i = start; i < priv->hw_params.max_stations; i++)
- if (priv->stations[i].used &&
- (!compare_ether_addr(priv->stations[i].sta.sta.addr,
- addr))) {
- ret = i;
- goto out;
- }
-
- IWL_DEBUG_ASSOC_LIMIT(priv, "can not find STA %pM total %d\n",
- addr, priv->num_stations);
-
- out:
- /*
- * It may be possible that more commands interacting with stations
- * arrive before we completed processing the adding of
- * station
- */
- if (ret != IWL_INVALID_STATION &&
- (!(priv->stations[ret].used & IWL_STA_UCODE_ACTIVE) ||
- ((priv->stations[ret].used & IWL_STA_UCODE_ACTIVE) &&
- (priv->stations[ret].used & IWL_STA_UCODE_INPROGRESS)))) {
- IWL_ERR(priv, "Requested station info for sta %d before ready.\n",
- ret);
- ret = IWL_INVALID_STATION;
- }
- spin_unlock_irqrestore(&priv->sta_lock, flags);
- return ret;
-}
-
-static int iwl_get_ra_sta_id(struct iwl_priv *priv, struct ieee80211_hdr *hdr)
-{
- if (priv->iw_mode == NL80211_IFTYPE_STATION) {
- return IWL_AP_ID;
- } else {
- u8 *da = ieee80211_get_DA(hdr);
- return iwl_find_station(priv, da);
- }
-}
-
-/**
- * iwl4965_rx_reply_tx - Handle standard (non-aggregation) Tx response
- */
-static void iwl4965_rx_reply_tx(struct iwl_priv *priv,
- struct iwl_rx_mem_buffer *rxb)
-{
- struct iwl_rx_packet *pkt = rxb_addr(rxb);
- u16 sequence = le16_to_cpu(pkt->hdr.sequence);
- int txq_id = SEQ_TO_QUEUE(sequence);
- int index = SEQ_TO_INDEX(sequence);
- struct iwl_tx_queue *txq = &priv->txq[txq_id];
- struct ieee80211_hdr *hdr;
- struct ieee80211_tx_info *info;
- struct iwl4965_tx_resp *tx_resp = (void *)&pkt->u.raw[0];
- u32 status = le32_to_cpu(tx_resp->u.status);
- int uninitialized_var(tid);
- int sta_id;
- int freed;
- u8 *qc = NULL;
- unsigned long flags;
-
- if ((index >= txq->q.n_bd) || (iwl_queue_used(&txq->q, index) == 0)) {
- IWL_ERR(priv, "Read index for DMA queue txq_id (%d) index %d "
- "is out of range [0-%d] %d %d\n", txq_id,
- index, txq->q.n_bd, txq->q.write_ptr,
- txq->q.read_ptr);
- return;
- }
-
- txq->time_stamp = jiffies;
- info = IEEE80211_SKB_CB(txq->txb[txq->q.read_ptr].skb);
- memset(&info->status, 0, sizeof(info->status));
-
- hdr = iwl_tx_queue_get_hdr(priv, txq_id, index);
- if (ieee80211_is_data_qos(hdr->frame_control)) {
- qc = ieee80211_get_qos_ctl(hdr);
- tid = qc[0] & 0xf;
- }
-
- sta_id = iwl_get_ra_sta_id(priv, hdr);
- if (txq->sched_retry && unlikely(sta_id == IWL_INVALID_STATION)) {
- IWL_ERR(priv, "Station not known\n");
- return;
- }
-
- spin_lock_irqsave(&priv->sta_lock, flags);
- if (txq->sched_retry) {
- const u32 scd_ssn = iwl4965_get_scd_ssn(tx_resp);
- struct iwl_ht_agg *agg = NULL;
- WARN_ON(!qc);
-
- agg = &priv->stations[sta_id].tid[tid].agg;
-
- iwl4965_tx_status_reply_tx(priv, agg, tx_resp, txq_id, index);
-
- /* check if BAR is needed */
- if ((tx_resp->frame_count == 1) && !iwl_is_tx_success(status))
- info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK;
-
- if (txq->q.read_ptr != (scd_ssn & 0xff)) {
- index = iwl_queue_dec_wrap(scd_ssn & 0xff, txq->q.n_bd);
- IWL_DEBUG_TX_REPLY(priv, "Retry scheduler reclaim scd_ssn "
- "%d index %d\n", scd_ssn , index);
- freed = iwlagn_tx_queue_reclaim(priv, txq_id, index);
- if (qc)
- iwl_free_tfds_in_queue(priv, sta_id,
- tid, freed);
-
- if (priv->mac80211_registered &&
- (iwl_queue_space(&txq->q) > txq->q.low_mark) &&
- (agg->state != IWL_EMPTYING_HW_QUEUE_DELBA))
- iwl_wake_queue(priv, txq);
- }
- } else {
- info->status.rates[0].count = tx_resp->failure_frame + 1;
- info->flags |= iwl_tx_status_to_mac80211(status);
- iwlagn_hwrate_to_tx_control(priv,
- le32_to_cpu(tx_resp->rate_n_flags),
- info);
-
- IWL_DEBUG_TX_REPLY(priv, "TXQ %d status %s (0x%08x) "
- "rate_n_flags 0x%x retries %d\n",
- txq_id,
- iwl_get_tx_fail_reason(status), status,
- le32_to_cpu(tx_resp->rate_n_flags),
- tx_resp->failure_frame);
-
- freed = iwlagn_tx_queue_reclaim(priv, txq_id, index);
- if (qc && likely(sta_id != IWL_INVALID_STATION))
- iwl_free_tfds_in_queue(priv, sta_id, tid, freed);
- else if (sta_id == IWL_INVALID_STATION)
- IWL_DEBUG_TX_REPLY(priv, "Station not known\n");
-
- if (priv->mac80211_registered &&
- (iwl_queue_space(&txq->q) > txq->q.low_mark))
- iwl_wake_queue(priv, txq);
- }
- if (qc && likely(sta_id != IWL_INVALID_STATION))
- iwlagn_txq_check_empty(priv, sta_id, tid, txq_id);
-
- iwl_check_abort_status(priv, tx_resp->frame_count, status);
-
- spin_unlock_irqrestore(&priv->sta_lock, flags);
-}
-
-static void iwl4965_rx_beacon_notif(struct iwl_priv *priv,
- struct iwl_rx_mem_buffer *rxb)
-{
- struct iwl_rx_packet *pkt = rxb_addr(rxb);
- struct iwl4965_beacon_notif *beacon = (void *)pkt->u.raw;
-#ifdef CONFIG_IWLWIFI_DEBUG
- u8 rate = iwl_hw_get_rate(beacon->beacon_notify_hdr.rate_n_flags);
-
- IWL_DEBUG_RX(priv, "beacon status %#x, retries:%d ibssmgr:%d "
- "tsf:0x%.8x%.8x rate:%d\n",
- le32_to_cpu(beacon->beacon_notify_hdr.u.status) & TX_STATUS_MSK,
- beacon->beacon_notify_hdr.failure_frame,
- le32_to_cpu(beacon->ibss_mgr_status),
- le32_to_cpu(beacon->high_tsf),
- le32_to_cpu(beacon->low_tsf), rate);
-#endif
-
- priv->ibss_manager = le32_to_cpu(beacon->ibss_mgr_status);
-
- if (!test_bit(STATUS_EXIT_PENDING, &priv->status))
- queue_work(priv->workqueue, &priv->beacon_update);
-}
-
-static int iwl4965_calc_rssi(struct iwl_priv *priv,
- struct iwl_rx_phy_res *rx_resp)
-{
- /* data from PHY/DSP regarding signal strength, etc.,
- * contents are always there, not configurable by host. */
- struct iwl4965_rx_non_cfg_phy *ncphy =
- (struct iwl4965_rx_non_cfg_phy *)rx_resp->non_cfg_phy_buf;
- u32 agc = (le16_to_cpu(ncphy->agc_info) & IWL49_AGC_DB_MASK)
- >> IWL49_AGC_DB_POS;
-
- u32 valid_antennae =
- (le16_to_cpu(rx_resp->phy_flags) & IWL49_RX_PHY_FLAGS_ANTENNAE_MASK)
- >> IWL49_RX_PHY_FLAGS_ANTENNAE_OFFSET;
- u8 max_rssi = 0;
- u32 i;
-
- /* Find max rssi among 3 possible receivers.
- * These values are measured by the digital signal processor (DSP).
- * They should stay fairly constant even as the signal strength varies,
- * if the radio's automatic gain control (AGC) is working right.
- * AGC value (see below) will provide the "interesting" info. */
- for (i = 0; i < 3; i++)
- if (valid_antennae & (1 << i))
- max_rssi = max(ncphy->rssi_info[i << 1], max_rssi);
-
- IWL_DEBUG_STATS(priv, "Rssi In A %d B %d C %d Max %d AGC dB %d\n",
- ncphy->rssi_info[0], ncphy->rssi_info[2], ncphy->rssi_info[4],
- max_rssi, agc);
-
- /* dBm = max_rssi dB - agc dB - constant.
- * Higher AGC (higher radio gain) means lower signal. */
- return max_rssi - agc - IWLAGN_RSSI_OFFSET;
-}
-
-
-/* Set up 4965-specific Rx frame reply handlers */
-static void iwl4965_rx_handler_setup(struct iwl_priv *priv)
-{
- /* Legacy Rx frames */
- priv->rx_handlers[REPLY_RX] = iwlagn_rx_reply_rx;
- /* Tx response */
- priv->rx_handlers[REPLY_TX] = iwl4965_rx_reply_tx;
- priv->rx_handlers[BEACON_NOTIFICATION] = iwl4965_rx_beacon_notif;
-
- /* set up notification wait support */
- spin_lock_init(&priv->_agn.notif_wait_lock);
- INIT_LIST_HEAD(&priv->_agn.notif_waits);
- init_waitqueue_head(&priv->_agn.notif_waitq);
-}
-
-static void iwl4965_setup_deferred_work(struct iwl_priv *priv)
-{
- INIT_WORK(&priv->txpower_work, iwl4965_bg_txpower_work);
-}
-
-static void iwl4965_cancel_deferred_work(struct iwl_priv *priv)
-{
- cancel_work_sync(&priv->txpower_work);
-}
-
-static struct iwl_hcmd_ops iwl4965_hcmd = {
- .rxon_assoc = iwl4965_send_rxon_assoc,
- .commit_rxon = iwl4965_commit_rxon,
- .set_rxon_chain = iwlagn_set_rxon_chain,
- .send_bt_config = iwl_send_bt_config,
-};
-
-static void iwl4965_post_scan(struct iwl_priv *priv)
-{
- struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
-
- /*
- * Since setting the RXON may have been deferred while
- * performing the scan, fire one off if needed
- */
- if (memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging)))
- iwlcore_commit_rxon(priv, ctx);
-}
-
-static void iwl4965_post_associate(struct iwl_priv *priv)
-{
- struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
- struct ieee80211_vif *vif = ctx->vif;
- struct ieee80211_conf *conf = NULL;
- int ret = 0;
-
- if (!vif || !priv->is_open)
- return;
-
- if (vif->type == NL80211_IFTYPE_AP) {
- IWL_ERR(priv, "%s Should not be called in AP mode\n", __func__);
- return;
- }
-
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
- return;
-
- iwl_scan_cancel_timeout(priv, 200);
-
- conf = ieee80211_get_hw_conf(priv->hw);
-
- ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
- iwlcore_commit_rxon(priv, ctx);
-
- ret = iwl_send_rxon_timing(priv, ctx);
- if (ret)
- IWL_WARN(priv, "RXON timing - "
- "Attempting to continue.\n");
-
- ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
-
- iwl_set_rxon_ht(priv, &priv->current_ht_config);
-
- if (priv->cfg->ops->hcmd->set_rxon_chain)
- priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx);
-
- ctx->staging.assoc_id = cpu_to_le16(vif->bss_conf.aid);
-
- IWL_DEBUG_ASSOC(priv, "assoc id %d beacon interval %d\n",
- vif->bss_conf.aid, vif->bss_conf.beacon_int);
-
- if (vif->bss_conf.use_short_preamble)
- ctx->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
- else
- ctx->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
-
- if (ctx->staging.flags & RXON_FLG_BAND_24G_MSK) {
- if (vif->bss_conf.use_short_slot)
- ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
- else
- ctx->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
- }
-
- iwlcore_commit_rxon(priv, ctx);
-
- IWL_DEBUG_ASSOC(priv, "Associated as %d to: %pM\n",
- vif->bss_conf.aid, ctx->active.bssid_addr);
-
- switch (vif->type) {
- case NL80211_IFTYPE_STATION:
- break;
- case NL80211_IFTYPE_ADHOC:
- iwlagn_send_beacon_cmd(priv);
- break;
- default:
- IWL_ERR(priv, "%s Should not be called in %d mode\n",
- __func__, vif->type);
- break;
- }
-
- /* the chain noise calibration will enabled PM upon completion
- * If chain noise has already been run, then we need to enable
- * power management here */
- if (priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE)
- iwl_power_update_mode(priv, false);
-
- /* Enable Rx differential gain and sensitivity calibrations */
- iwl_chain_noise_reset(priv);
- priv->start_calib = 1;
-}
-
-static void iwl4965_config_ap(struct iwl_priv *priv)
-{
- struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
- struct ieee80211_vif *vif = ctx->vif;
- int ret = 0;
-
- lockdep_assert_held(&priv->mutex);
-
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
- return;
-
- /* The following should be done only at AP bring up */
- if (!iwl_is_associated_ctx(ctx)) {
-
- /* RXON - unassoc (to set timing command) */
- ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
- iwlcore_commit_rxon(priv, ctx);
-
- /* RXON Timing */
- ret = iwl_send_rxon_timing(priv, ctx);
- if (ret)
- IWL_WARN(priv, "RXON timing failed - "
- "Attempting to continue.\n");
-
- /* AP has all antennas */
- priv->chain_noise_data.active_chains =
- priv->hw_params.valid_rx_ant;
- iwl_set_rxon_ht(priv, &priv->current_ht_config);
- if (priv->cfg->ops->hcmd->set_rxon_chain)
- priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx);
-
- ctx->staging.assoc_id = 0;
-
- if (vif->bss_conf.use_short_preamble)
- ctx->staging.flags |=
- RXON_FLG_SHORT_PREAMBLE_MSK;
- else
- ctx->staging.flags &=
- ~RXON_FLG_SHORT_PREAMBLE_MSK;
-
- if (ctx->staging.flags & RXON_FLG_BAND_24G_MSK) {
- if (vif->bss_conf.use_short_slot)
- ctx->staging.flags |=
- RXON_FLG_SHORT_SLOT_MSK;
- else
- ctx->staging.flags &=
- ~RXON_FLG_SHORT_SLOT_MSK;
- }
- /* need to send beacon cmd before committing assoc RXON! */
- iwlagn_send_beacon_cmd(priv);
- /* restore RXON assoc */
- ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
- iwlcore_commit_rxon(priv, ctx);
- }
- iwlagn_send_beacon_cmd(priv);
-
- /* FIXME - we need to add code here to detect a totally new
- * configuration, reset the AP, unassoc, rxon timing, assoc,
- * clear sta table, add BCAST sta... */
-}
-
-static struct iwl_hcmd_utils_ops iwl4965_hcmd_utils = {
- .get_hcmd_size = iwl4965_get_hcmd_size,
- .build_addsta_hcmd = iwl4965_build_addsta_hcmd,
- .chain_noise_reset = iwl4965_chain_noise_reset,
- .gain_computation = iwl4965_gain_computation,
- .tx_cmd_protection = iwl_legacy_tx_cmd_protection,
- .calc_rssi = iwl4965_calc_rssi,
- .request_scan = iwlagn_request_scan,
- .post_scan = iwl4965_post_scan,
-};
-
-static struct iwl_lib_ops iwl4965_lib = {
- .set_hw_params = iwl4965_hw_set_hw_params,
- .txq_update_byte_cnt_tbl = iwl4965_txq_update_byte_cnt_tbl,
- .txq_set_sched = iwl4965_txq_set_sched,
- .txq_agg_enable = iwl4965_txq_agg_enable,
- .txq_agg_disable = iwl4965_txq_agg_disable,
- .txq_attach_buf_to_tfd = iwl_hw_txq_attach_buf_to_tfd,
- .txq_free_tfd = iwl_hw_txq_free_tfd,
- .txq_init = iwl_hw_tx_queue_init,
- .rx_handler_setup = iwl4965_rx_handler_setup,
- .setup_deferred_work = iwl4965_setup_deferred_work,
- .cancel_deferred_work = iwl4965_cancel_deferred_work,
- .is_valid_rtc_data_addr = iwl4965_hw_valid_rtc_data_addr,
- .alive_notify = iwl4965_alive_notify,
- .init_alive_start = iwl4965_init_alive_start,
- .load_ucode = iwl4965_load_bsm,
- .dump_nic_event_log = iwl_dump_nic_event_log,
- .dump_nic_error_log = iwl_dump_nic_error_log,
- .dump_fh = iwl_dump_fh,
- .set_channel_switch = iwl4965_hw_channel_switch,
- .apm_ops = {
- .init = iwl_apm_init,
- .config = iwl4965_nic_config,
- },
- .eeprom_ops = {
- .regulatory_bands = {
- EEPROM_REGULATORY_BAND_1_CHANNELS,
- EEPROM_REGULATORY_BAND_2_CHANNELS,
- EEPROM_REGULATORY_BAND_3_CHANNELS,
- EEPROM_REGULATORY_BAND_4_CHANNELS,
- EEPROM_REGULATORY_BAND_5_CHANNELS,
- EEPROM_4965_REGULATORY_BAND_24_HT40_CHANNELS,
- EEPROM_4965_REGULATORY_BAND_52_HT40_CHANNELS
- },
- .acquire_semaphore = iwlcore_eeprom_acquire_semaphore,
- .release_semaphore = iwlcore_eeprom_release_semaphore,
- .calib_version = iwl4965_eeprom_calib_version,
- .query_addr = iwlcore_eeprom_query_addr,
- },
- .send_tx_power = iwl4965_send_tx_power,
- .update_chain_flags = iwl_update_chain_flags,
- .isr_ops = {
- .isr = iwl_isr_legacy,
- },
- .temp_ops = {
- .temperature = iwl4965_temperature_calib,
- },
- .debugfs_ops = {
- .rx_stats_read = iwl_ucode_rx_stats_read,
- .tx_stats_read = iwl_ucode_tx_stats_read,
- .general_stats_read = iwl_ucode_general_stats_read,
- .bt_stats_read = iwl_ucode_bt_stats_read,
- .reply_tx_error = iwl_reply_tx_error_read,
- },
- .check_plcp_health = iwl_good_plcp_health,
-};
-
-static const struct iwl_legacy_ops iwl4965_legacy_ops = {
- .post_associate = iwl4965_post_associate,
- .config_ap = iwl4965_config_ap,
- .manage_ibss_station = iwlagn_manage_ibss_station,
- .update_bcast_stations = iwl_update_bcast_stations,
-};
-
-struct ieee80211_ops iwl4965_hw_ops = {
- .tx = iwlagn_mac_tx,
- .start = iwlagn_mac_start,
- .stop = iwlagn_mac_stop,
- .add_interface = iwl_mac_add_interface,
- .remove_interface = iwl_mac_remove_interface,
- .change_interface = iwl_mac_change_interface,
- .config = iwl_legacy_mac_config,
- .configure_filter = iwlagn_configure_filter,
- .set_key = iwlagn_mac_set_key,
- .update_tkip_key = iwlagn_mac_update_tkip_key,
- .conf_tx = iwl_mac_conf_tx,
- .reset_tsf = iwl_legacy_mac_reset_tsf,
- .bss_info_changed = iwl_legacy_mac_bss_info_changed,
- .ampdu_action = iwlagn_mac_ampdu_action,
- .hw_scan = iwl_mac_hw_scan,
- .sta_add = iwlagn_mac_sta_add,
- .sta_remove = iwl_mac_sta_remove,
- .channel_switch = iwlagn_mac_channel_switch,
- .flush = iwlagn_mac_flush,
- .tx_last_beacon = iwl_mac_tx_last_beacon,
-};
-
-static const struct iwl_ops iwl4965_ops = {
- .lib = &iwl4965_lib,
- .hcmd = &iwl4965_hcmd,
- .utils = &iwl4965_hcmd_utils,
- .led = &iwlagn_led_ops,
- .legacy = &iwl4965_legacy_ops,
- .ieee80211_ops = &iwl4965_hw_ops,
-};
-
-static struct iwl_base_params iwl4965_base_params = {
- .eeprom_size = IWL4965_EEPROM_IMG_SIZE,
- .num_of_queues = IWL49_NUM_QUEUES,
- .num_of_ampdu_queues = IWL49_NUM_AMPDU_QUEUES,
- .pll_cfg_val = 0,
- .set_l0s = true,
- .use_bsm = true,
- .use_isr_legacy = true,
- .broken_powersave = true,
- .led_compensation = 61,
- .chain_noise_num_beacons = IWL4965_CAL_NUM_BEACONS,
- .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
- .wd_timeout = IWL_DEF_WD_TIMEOUT,
- .temperature_kelvin = true,
- .max_event_log_size = 512,
- .tx_power_by_driver = true,
- .ucode_tracing = true,
- .sensitivity_calib_by_driver = true,
- .chain_noise_calib_by_driver = true,
- .no_agg_framecnt_info = true,
-};
-
-struct iwl_cfg iwl4965_agn_cfg = {
- .name = "Intel(R) Wireless WiFi Link 4965AGN",
- .fw_name_pre = IWL4965_FW_PRE,
- .ucode_api_max = IWL4965_UCODE_API_MAX,
- .ucode_api_min = IWL4965_UCODE_API_MIN,
- .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
- .valid_tx_ant = ANT_AB,
- .valid_rx_ant = ANT_ABC,
- .eeprom_ver = EEPROM_4965_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_4965_TX_POWER_VERSION,
- .ops = &iwl4965_ops,
- .mod_params = &iwlagn_mod_params,
- .base_params = &iwl4965_base_params,
- .led_mode = IWL_LED_BLINK,
- /*
- * Force use of chains B and C for scan RX on 5 GHz band
- * because the device has off-channel reception on chain A.
- */
- .scan_rx_antennas[IEEE80211_BAND_5GHZ] = ANT_BC,
-};
-
-/* Module firmware */
-MODULE_FIRMWARE(IWL4965_MODULE_FIRMWARE(IWL4965_UCODE_API_MAX));
-
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 9965215..d08fa93 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -86,7 +86,6 @@ MODULE_DESCRIPTION(DRV_DESCRIPTION);
MODULE_VERSION(DRV_VERSION);
MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR);
MODULE_LICENSE("GPL");
-MODULE_ALIAS("iwl4965");
static int iwlagn_ant_coupling;
static bool iwlagn_bt_ch_announce = 1;
@@ -3810,7 +3809,6 @@ static void iwlagn_bg_roc_done(struct work_struct *work)
mutex_unlock(&priv->mutex);
}
-#ifdef CONFIG_IWL5000
static int iwl_mac_remain_on_channel(struct ieee80211_hw *hw,
struct ieee80211_channel *channel,
enum nl80211_channel_type channel_type,
@@ -3866,7 +3864,6 @@ static int iwl_mac_cancel_remain_on_channel(struct ieee80211_hw *hw)
return 0;
}
-#endif
/*****************************************************************************
*
@@ -4036,7 +4033,6 @@ static void iwl_uninit_drv(struct iwl_priv *priv)
kfree(priv->scan_cmd);
}
-#ifdef CONFIG_IWL5000
struct ieee80211_ops iwlagn_hw_ops = {
.tx = iwlagn_mac_tx,
.start = iwlagn_mac_start,
@@ -4061,7 +4057,6 @@ struct ieee80211_ops iwlagn_hw_ops = {
.remain_on_channel = iwl_mac_remain_on_channel,
.cancel_remain_on_channel = iwl_mac_cancel_remain_on_channel,
};
-#endif
static void iwl_hw_detect(struct iwl_priv *priv)
{
@@ -4129,12 +4124,7 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
if (cfg->mod_params->disable_hw_scan) {
dev_printk(KERN_DEBUG, &(pdev->dev),
"sw scan support is deprecated\n");
-#ifdef CONFIG_IWL5000
iwlagn_hw_ops.hw_scan = NULL;
-#endif
-#ifdef CONFIG_IWL4965
- iwl4965_hw_ops.hw_scan = NULL;
-#endif
}
hw = iwl_alloc_all(cfg);
@@ -4513,12 +4503,6 @@ static void __devexit iwl_pci_remove(struct pci_dev *pdev)
/* Hardware specific file defines the PCI IDs table for that hardware module */
static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = {
-#ifdef CONFIG_IWL4965
- {IWL_PCI_DEVICE(0x4229, PCI_ANY_ID, iwl4965_agn_cfg)},
- {IWL_PCI_DEVICE(0x4230, PCI_ANY_ID, iwl4965_agn_cfg)},
-#endif /* CONFIG_IWL4965 */
-#ifdef CONFIG_IWL5000
-/* 5100 Series WiFi */
{IWL_PCI_DEVICE(0x4232, 0x1201, iwl5100_agn_cfg)}, /* Mini Card */
{IWL_PCI_DEVICE(0x4232, 0x1301, iwl5100_agn_cfg)}, /* Half Mini Card */
{IWL_PCI_DEVICE(0x4232, 0x1204, iwl5100_agn_cfg)}, /* Mini Card */
@@ -4704,8 +4688,6 @@ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = {
{IWL_PCI_DEVICE(0x0893, 0x0266, iwl230_bg_cfg)},
{IWL_PCI_DEVICE(0x0892, 0x0466, iwl230_bg_cfg)},
-#endif /* CONFIG_IWL5000 */
-
{0}
};
MODULE_DEVICE_TABLE(pci, iwl_hw_card_ids);
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index 977ddfb..4bd3420 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -43,11 +43,6 @@
#include "iwl-helpers.h"
-MODULE_DESCRIPTION("iwl core");
-MODULE_VERSION(IWLWIFI_VERSION);
-MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR);
-MODULE_LICENSE("GPL");
-
/*
* set bt_coex_active to true, uCode will do kill/defer
* every time the priority line is asserted (BT is sending signals on the
@@ -65,15 +60,12 @@ MODULE_LICENSE("GPL");
* default: bt_coex_active = true (BT_COEX_ENABLE)
*/
bool bt_coex_active = true;
-EXPORT_SYMBOL_GPL(bt_coex_active);
module_param(bt_coex_active, bool, S_IRUGO);
MODULE_PARM_DESC(bt_coex_active, "enable wifi/bluetooth co-exist");
u32 iwl_debug_level;
-EXPORT_SYMBOL(iwl_debug_level);
const u8 iwl_bcast_addr[ETH_ALEN] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
-EXPORT_SYMBOL(iwl_bcast_addr);
/* This function both allocates and initializes hw and priv. */
@@ -98,7 +90,6 @@ struct ieee80211_hw *iwl_alloc_all(struct iwl_cfg *cfg)
out:
return hw;
}
-EXPORT_SYMBOL(iwl_alloc_all);
#define MAX_BIT_RATE_40_MHZ 150 /* Mbps */
#define MAX_BIT_RATE_20_MHZ 72 /* Mbps */
@@ -272,7 +263,6 @@ int iwlcore_init_geos(struct iwl_priv *priv)
return 0;
}
-EXPORT_SYMBOL(iwlcore_init_geos);
/*
* iwlcore_free_geos - undo allocations in iwlcore_init_geos
@@ -283,7 +273,6 @@ void iwlcore_free_geos(struct iwl_priv *priv)
kfree(priv->ieee_rates);
clear_bit(STATUS_GEO_CONFIGURED, &priv->status);
}
-EXPORT_SYMBOL(iwlcore_free_geos);
static bool iwl_is_channel_extension(struct iwl_priv *priv,
enum ieee80211_band band,
@@ -328,7 +317,6 @@ bool iwl_is_ht40_tx_allowed(struct iwl_priv *priv,
le16_to_cpu(ctx->staging.channel),
ctx->ht.extension_chan_offset);
}
-EXPORT_SYMBOL(iwl_is_ht40_tx_allowed);
static u16 iwl_adjust_beacon_interval(u16 beacon_val, u16 max_beacon_val)
{
@@ -429,7 +417,6 @@ int iwl_send_rxon_timing(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
return iwl_send_cmd_pdu(priv, ctx->rxon_timing_cmd,
sizeof(ctx->timing), &ctx->timing);
}
-EXPORT_SYMBOL(iwl_send_rxon_timing);
void iwl_set_rxon_hwcrypto(struct iwl_priv *priv, struct iwl_rxon_context *ctx,
int hw_decrypt)
@@ -442,7 +429,6 @@ void iwl_set_rxon_hwcrypto(struct iwl_priv *priv, struct iwl_rxon_context *ctx,
rxon->filter_flags |= RXON_FILTER_DIS_DECRYPT_MSK;
}
-EXPORT_SYMBOL(iwl_set_rxon_hwcrypto);
/* validate RXON structure is valid */
int iwl_check_rxon_cmd(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
@@ -515,7 +501,6 @@ int iwl_check_rxon_cmd(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
}
return 0;
}
-EXPORT_SYMBOL(iwl_check_rxon_cmd);
/**
* iwl_full_rxon_required - check if full RXON (vs RXON_ASSOC) cmd is needed
@@ -579,7 +564,6 @@ int iwl_full_rxon_required(struct iwl_priv *priv,
return 0;
}
-EXPORT_SYMBOL(iwl_full_rxon_required);
u8 iwl_rate_get_lowest_plcp(struct iwl_priv *priv,
struct iwl_rxon_context *ctx)
@@ -593,7 +577,6 @@ u8 iwl_rate_get_lowest_plcp(struct iwl_priv *priv,
else
return IWL_RATE_6M_PLCP;
}
-EXPORT_SYMBOL(iwl_rate_get_lowest_plcp);
static void _iwl_set_rxon_ht(struct iwl_priv *priv,
struct iwl_ht_config *ht_conf,
@@ -670,7 +653,6 @@ void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_config *ht_conf)
for_each_context(priv, ctx)
_iwl_set_rxon_ht(priv, ht_conf, ctx);
}
-EXPORT_SYMBOL(iwl_set_rxon_ht);
/* Return valid, unused, channel for a passive scan to reset the RF */
u8 iwl_get_single_channel_number(struct iwl_priv *priv,
@@ -711,7 +693,6 @@ u8 iwl_get_single_channel_number(struct iwl_priv *priv,
return channel;
}
-EXPORT_SYMBOL(iwl_get_single_channel_number);
/**
* iwl_set_rxon_channel - Set the band and channel values in staging RXON
@@ -742,7 +723,6 @@ int iwl_set_rxon_channel(struct iwl_priv *priv, struct ieee80211_channel *ch,
return 0;
}
-EXPORT_SYMBOL(iwl_set_rxon_channel);
void iwl_set_flags_for_band(struct iwl_priv *priv,
struct iwl_rxon_context *ctx,
@@ -766,7 +746,6 @@ void iwl_set_flags_for_band(struct iwl_priv *priv,
ctx->staging.flags &= ~RXON_FLG_CCK_MSK;
}
}
-EXPORT_SYMBOL(iwl_set_flags_for_band);
/*
* initialize rxon structure with default values from eeprom
@@ -838,7 +817,6 @@ void iwl_connection_init_rx_config(struct iwl_priv *priv,
ctx->staging.ofdm_ht_dual_stream_basic_rates = 0xff;
ctx->staging.ofdm_ht_triple_stream_basic_rates = 0xff;
}
-EXPORT_SYMBOL(iwl_connection_init_rx_config);
void iwl_set_rate(struct iwl_priv *priv)
{
@@ -871,7 +849,6 @@ void iwl_set_rate(struct iwl_priv *priv)
(IWL_OFDM_BASIC_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF;
}
}
-EXPORT_SYMBOL(iwl_set_rate);
void iwl_chswitch_done(struct iwl_priv *priv, bool is_success)
{
@@ -891,7 +868,6 @@ void iwl_chswitch_done(struct iwl_priv *priv, bool is_success)
mutex_unlock(&priv->mutex);
}
}
-EXPORT_SYMBOL(iwl_chswitch_done);
void iwl_rx_csa(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb)
{
@@ -919,7 +895,6 @@ void iwl_rx_csa(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb)
}
}
}
-EXPORT_SYMBOL(iwl_rx_csa);
#ifdef CONFIG_IWLWIFI_DEBUG
void iwl_print_rx_config_cmd(struct iwl_priv *priv,
@@ -941,7 +916,6 @@ void iwl_print_rx_config_cmd(struct iwl_priv *priv,
IWL_DEBUG_RADIO(priv, "u8[6] bssid_addr: %pM\n", rxon->bssid_addr);
IWL_DEBUG_RADIO(priv, "u16 assoc_id: 0x%x\n", le16_to_cpu(rxon->assoc_id));
}
-EXPORT_SYMBOL(iwl_print_rx_config_cmd);
#endif
/**
* iwl_irq_handle_error - called for HW or SW error interrupt from card
@@ -1021,7 +995,6 @@ void iwl_irq_handle_error(struct iwl_priv *priv)
queue_work(priv->workqueue, &priv->restart);
}
}
-EXPORT_SYMBOL(iwl_irq_handle_error);
static int iwl_apm_stop_master(struct iwl_priv *priv)
{
@@ -1058,7 +1031,6 @@ void iwl_apm_stop(struct iwl_priv *priv)
*/
iwl_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
}
-EXPORT_SYMBOL(iwl_apm_stop);
/*
@@ -1173,7 +1145,6 @@ int iwl_apm_init(struct iwl_priv *priv)
out:
return ret;
}
-EXPORT_SYMBOL(iwl_apm_init);
int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force)
@@ -1233,7 +1204,6 @@ int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force)
}
return ret;
}
-EXPORT_SYMBOL(iwl_set_tx_power);
void iwl_send_bt_config(struct iwl_priv *priv)
{
@@ -1257,7 +1227,6 @@ void iwl_send_bt_config(struct iwl_priv *priv)
sizeof(struct iwl_bt_cmd), &bt_cmd))
IWL_ERR(priv, "failed to send BT Coex Config\n");
}
-EXPORT_SYMBOL(iwl_send_bt_config);
int iwl_send_statistics_request(struct iwl_priv *priv, u8 flags, bool clear)
{
@@ -1275,7 +1244,6 @@ int iwl_send_statistics_request(struct iwl_priv *priv, u8 flags, bool clear)
sizeof(struct iwl_statistics_cmd),
&statistics_cmd);
}
-EXPORT_SYMBOL(iwl_send_statistics_request);
void iwl_rx_pm_sleep_notif(struct iwl_priv *priv,
struct iwl_rx_mem_buffer *rxb)
@@ -1287,7 +1255,6 @@ void iwl_rx_pm_sleep_notif(struct iwl_priv *priv,
sleep->pm_sleep_mode, sleep->pm_wakeup_src);
#endif
}
-EXPORT_SYMBOL(iwl_rx_pm_sleep_notif);
void iwl_rx_pm_debug_statistics_notif(struct iwl_priv *priv,
struct iwl_rx_mem_buffer *rxb)
@@ -1299,7 +1266,6 @@ void iwl_rx_pm_debug_statistics_notif(struct iwl_priv *priv,
get_cmd_string(pkt->hdr.cmd));
iwl_print_hex_dump(priv, IWL_DL_RADIO, pkt->u.raw, len);
}
-EXPORT_SYMBOL(iwl_rx_pm_debug_statistics_notif);
void iwl_rx_reply_error(struct iwl_priv *priv,
struct iwl_rx_mem_buffer *rxb)
@@ -1314,7 +1280,6 @@ void iwl_rx_reply_error(struct iwl_priv *priv,
le16_to_cpu(pkt->u.err_resp.bad_cmd_seq_num),
le32_to_cpu(pkt->u.err_resp.error_info));
}
-EXPORT_SYMBOL(iwl_rx_reply_error);
void iwl_clear_isr_stats(struct iwl_priv *priv)
{
@@ -1366,7 +1331,6 @@ int iwl_mac_conf_tx(struct ieee80211_hw *hw, u16 queue,
IWL_DEBUG_MAC80211(priv, "leave\n");
return 0;
}
-EXPORT_SYMBOL(iwl_mac_conf_tx);
int iwl_mac_tx_last_beacon(struct ieee80211_hw *hw)
{
@@ -1374,7 +1338,6 @@ int iwl_mac_tx_last_beacon(struct ieee80211_hw *hw)
return priv->ibss_manager == IWL_IBSS_MANAGER;
}
-EXPORT_SYMBOL_GPL(iwl_mac_tx_last_beacon);
static int iwl_set_mode(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
{
@@ -1484,7 +1447,6 @@ int iwl_mac_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
IWL_DEBUG_MAC80211(priv, "leave\n");
return err;
}
-EXPORT_SYMBOL(iwl_mac_add_interface);
static void iwl_teardown_interface(struct iwl_priv *priv,
struct ieee80211_vif *vif,
@@ -1537,7 +1499,6 @@ void iwl_mac_remove_interface(struct ieee80211_hw *hw,
IWL_DEBUG_MAC80211(priv, "leave\n");
}
-EXPORT_SYMBOL(iwl_mac_remove_interface);
int iwl_alloc_txq_mem(struct iwl_priv *priv)
{
@@ -1552,14 +1513,12 @@ int iwl_alloc_txq_mem(struct iwl_priv *priv)
}
return 0;
}
-EXPORT_SYMBOL(iwl_alloc_txq_mem);
void iwl_free_txq_mem(struct iwl_priv *priv)
{
kfree(priv->txq);
priv->txq = NULL;
}
-EXPORT_SYMBOL(iwl_free_txq_mem);
#ifdef CONFIG_IWLWIFI_DEBUGFS
@@ -1598,7 +1557,6 @@ int iwl_alloc_traffic_mem(struct iwl_priv *priv)
iwl_reset_traffic_log(priv);
return 0;
}
-EXPORT_SYMBOL(iwl_alloc_traffic_mem);
void iwl_free_traffic_mem(struct iwl_priv *priv)
{
@@ -1608,7 +1566,6 @@ void iwl_free_traffic_mem(struct iwl_priv *priv)
kfree(priv->rx_traffic);
priv->rx_traffic = NULL;
}
-EXPORT_SYMBOL(iwl_free_traffic_mem);
void iwl_dbg_log_tx_data_frame(struct iwl_priv *priv,
u16 length, struct ieee80211_hdr *header)
@@ -1633,7 +1590,6 @@ void iwl_dbg_log_tx_data_frame(struct iwl_priv *priv,
(priv->tx_traffic_idx + 1) % IWL_TRAFFIC_ENTRIES;
}
}
-EXPORT_SYMBOL(iwl_dbg_log_tx_data_frame);
void iwl_dbg_log_rx_data_frame(struct iwl_priv *priv,
u16 length, struct ieee80211_hdr *header)
@@ -1658,7 +1614,6 @@ void iwl_dbg_log_rx_data_frame(struct iwl_priv *priv,
(priv->rx_traffic_idx + 1) % IWL_TRAFFIC_ENTRIES;
}
}
-EXPORT_SYMBOL(iwl_dbg_log_rx_data_frame);
const char *get_mgmt_string(int cmd)
{
@@ -1795,7 +1750,6 @@ void iwl_update_stats(struct iwl_priv *priv, bool is_tx, __le16 fc, u16 len)
stats->data_bytes += len;
}
}
-EXPORT_SYMBOL(iwl_update_stats);
#endif
static void iwl_force_rf_reset(struct iwl_priv *priv)
@@ -1934,7 +1888,6 @@ int iwl_mac_change_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
mutex_unlock(&priv->mutex);
return err;
}
-EXPORT_SYMBOL(iwl_mac_change_interface);
/*
* On every watchdog tick we check (latest) time stamp. If it does not
@@ -2006,7 +1959,6 @@ void iwl_bg_watchdog(unsigned long data)
mod_timer(&priv->watchdog, jiffies +
msecs_to_jiffies(IWL_WD_TICK(timeout)));
}
-EXPORT_SYMBOL(iwl_bg_watchdog);
void iwl_setup_watchdog(struct iwl_priv *priv)
{
@@ -2018,7 +1970,6 @@ void iwl_setup_watchdog(struct iwl_priv *priv)
else
del_timer(&priv->watchdog);
}
-EXPORT_SYMBOL(iwl_setup_watchdog);
/*
* extended beacon time format
@@ -2044,7 +1995,6 @@ u32 iwl_usecs_to_beacons(struct iwl_priv *priv, u32 usec, u32 beacon_interval)
return (quot << priv->hw_params.beacon_time_tsf_bits) + rem;
}
-EXPORT_SYMBOL(iwl_usecs_to_beacons);
/* base is usually what we get from ucode with each received frame,
* the same as HW timer counter counting down
@@ -2072,7 +2022,6 @@ __le32 iwl_add_beacon_time(struct iwl_priv *priv, u32 base,
return cpu_to_le32(res);
}
-EXPORT_SYMBOL(iwl_add_beacon_time);
#ifdef CONFIG_PM
@@ -2092,7 +2041,6 @@ int iwl_pci_suspend(struct device *device)
return 0;
}
-EXPORT_SYMBOL(iwl_pci_suspend);
int iwl_pci_resume(struct device *device)
{
@@ -2121,7 +2069,6 @@ int iwl_pci_resume(struct device *device)
return 0;
}
-EXPORT_SYMBOL(iwl_pci_resume);
const struct dev_pm_ops iwl_pm_ops = {
.suspend = iwl_pci_suspend,
@@ -2131,6 +2078,5 @@ const struct dev_pm_ops iwl_pm_ops = {
.poweroff = iwl_pci_suspend,
.restore = iwl_pci_resume,
};
-EXPORT_SYMBOL(iwl_pm_ops);
#endif /* CONFIG_PM */
diff --git a/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
index bc7a965..8842411 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
@@ -1788,7 +1788,6 @@ err:
iwl_dbgfs_unregister(priv);
return -ENOMEM;
}
-EXPORT_SYMBOL(iwl_dbgfs_register);
/**
* Remove the debugfs files and directories
@@ -1802,7 +1801,6 @@ void iwl_dbgfs_unregister(struct iwl_priv *priv)
debugfs_remove_recursive(priv->debugfs_dir);
priv->debugfs_dir = NULL;
}
-EXPORT_SYMBOL(iwl_dbgfs_unregister);
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index 065615e..58165c7 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -43,14 +43,14 @@
#include "iwl-prph.h"
#include "iwl-fh.h"
#include "iwl-debug.h"
-#include "iwl-4965-hw.h"
-#include "iwl-3945-hw.h"
#include "iwl-agn-hw.h"
#include "iwl-led.h"
#include "iwl-power.h"
#include "iwl-agn-rs.h"
#include "iwl-agn-tt.h"
+#define U32_PAD(n) ((4-(n))&0x3)
+
struct iwl_tx_queue;
/* CT-KILL constants */
diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.c b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
index 358cfd7..833194a 100644
--- a/drivers/net/wireless/iwlwifi/iwl-eeprom.c
+++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
@@ -222,7 +222,6 @@ const u8 *iwlcore_eeprom_query_addr(const struct iwl_priv *priv, size_t offset)
BUG_ON(offset >= priv->cfg->base_params->eeprom_size);
return &priv->eeprom[offset];
}
-EXPORT_SYMBOL(iwlcore_eeprom_query_addr);
static int iwl_init_otp_access(struct iwl_priv *priv)
{
@@ -382,7 +381,6 @@ const u8 *iwl_eeprom_query_addr(const struct iwl_priv *priv, size_t offset)
{
return priv->cfg->ops->lib->eeprom_ops.query_addr(priv, offset);
}
-EXPORT_SYMBOL(iwl_eeprom_query_addr);
u16 iwl_eeprom_query16(const struct iwl_priv *priv, size_t offset)
{
@@ -390,7 +388,6 @@ u16 iwl_eeprom_query16(const struct iwl_priv *priv, size_t offset)
return 0;
return (u16)priv->eeprom[offset] | ((u16)priv->eeprom[offset + 1] << 8);
}
-EXPORT_SYMBOL(iwl_eeprom_query16);
/**
* iwl_eeprom_init - read EEPROM contents
@@ -509,14 +506,12 @@ err:
alloc_err:
return ret;
}
-EXPORT_SYMBOL(iwl_eeprom_init);
void iwl_eeprom_free(struct iwl_priv *priv)
{
kfree(priv->eeprom);
priv->eeprom = NULL;
}
-EXPORT_SYMBOL(iwl_eeprom_free);
static void iwl_init_band_reference(const struct iwl_priv *priv,
int eep_band, int *eeprom_ch_count,
@@ -779,7 +774,6 @@ int iwl_init_channel_map(struct iwl_priv *priv)
return 0;
}
-EXPORT_SYMBOL(iwl_init_channel_map);
/*
* iwl_free_channel_map - undo allocations in iwl_init_channel_map
@@ -789,7 +783,6 @@ void iwl_free_channel_map(struct iwl_priv *priv)
kfree(priv->channel_info);
priv->channel_count = 0;
}
-EXPORT_SYMBOL(iwl_free_channel_map);
/**
* iwl_get_channel_info - Find driver's private channel info
@@ -818,4 +811,3 @@ const struct iwl_channel_info *iwl_get_channel_info(const struct iwl_priv *priv,
return NULL;
}
-EXPORT_SYMBOL(iwl_get_channel_info);
diff --git a/drivers/net/wireless/iwlwifi/iwl-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-hcmd.c
index e4b953d..02499f6 100644
--- a/drivers/net/wireless/iwlwifi/iwl-hcmd.c
+++ b/drivers/net/wireless/iwlwifi/iwl-hcmd.c
@@ -114,7 +114,6 @@ const char *get_cmd_string(u8 cmd)
}
}
-EXPORT_SYMBOL(get_cmd_string);
#define HOST_COMPLETE_TIMEOUT (HZ / 2)
@@ -253,7 +252,6 @@ out:
mutex_unlock(&priv->sync_cmd_mutex);
return ret;
}
-EXPORT_SYMBOL(iwl_send_cmd_sync);
int iwl_send_cmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd)
{
@@ -262,7 +260,6 @@ int iwl_send_cmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd)
return iwl_send_cmd_sync(priv, cmd);
}
-EXPORT_SYMBOL(iwl_send_cmd);
int iwl_send_cmd_pdu(struct iwl_priv *priv, u8 id, u16 len, const void *data)
{
@@ -274,7 +271,6 @@ int iwl_send_cmd_pdu(struct iwl_priv *priv, u8 id, u16 len, const void *data)
return iwl_send_cmd_sync(priv, &cmd);
}
-EXPORT_SYMBOL(iwl_send_cmd_pdu);
int iwl_send_cmd_pdu_async(struct iwl_priv *priv,
u8 id, u16 len, const void *data,
@@ -293,4 +289,3 @@ int iwl_send_cmd_pdu_async(struct iwl_priv *priv,
return iwl_send_cmd_async(priv, &cmd);
}
-EXPORT_SYMBOL(iwl_send_cmd_pdu_async);
diff --git a/drivers/net/wireless/iwlwifi/iwl-led.c b/drivers/net/wireless/iwlwifi/iwl-led.c
index 074ad22..d7f2a0b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-led.c
+++ b/drivers/net/wireless/iwlwifi/iwl-led.c
@@ -175,7 +175,6 @@ void iwl_leds_init(struct iwl_priv *priv)
priv->led_registered = true;
}
-EXPORT_SYMBOL(iwl_leds_init);
void iwl_leds_exit(struct iwl_priv *priv)
{
@@ -185,4 +184,3 @@ void iwl_leds_exit(struct iwl_priv *priv)
led_classdev_unregister(&priv->led);
kfree(priv->led.name);
}
-EXPORT_SYMBOL(iwl_leds_exit);
diff --git a/drivers/net/wireless/iwlwifi/iwl-legacy.c b/drivers/net/wireless/iwlwifi/iwl-legacy.c
deleted file mode 100644
index e1ace3c..0000000
--- a/drivers/net/wireless/iwlwifi/iwl-legacy.c
+++ /dev/null
@@ -1,657 +0,0 @@
-/******************************************************************************
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
- * USA
- *
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * Contact Information:
- * Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *****************************************************************************/
-
-#include <linux/kernel.h>
-#include <net/mac80211.h>
-
-#include "iwl-dev.h"
-#include "iwl-core.h"
-#include "iwl-helpers.h"
-#include "iwl-legacy.h"
-
-static void iwl_update_qos(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
-{
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
- return;
-
- if (!ctx->is_active)
- return;
-
- ctx->qos_data.def_qos_parm.qos_flags = 0;
-
- if (ctx->qos_data.qos_active)
- ctx->qos_data.def_qos_parm.qos_flags |=
- QOS_PARAM_FLG_UPDATE_EDCA_MSK;
-
- if (ctx->ht.enabled)
- ctx->qos_data.def_qos_parm.qos_flags |= QOS_PARAM_FLG_TGN_MSK;
-
- IWL_DEBUG_QOS(priv, "send QoS cmd with Qos active=%d FLAGS=0x%X\n",
- ctx->qos_data.qos_active,
- ctx->qos_data.def_qos_parm.qos_flags);
-
- iwl_send_cmd_pdu_async(priv, ctx->qos_cmd,
- sizeof(struct iwl_qosparam_cmd),
- &ctx->qos_data.def_qos_parm, NULL);
-}
-
-/**
- * iwl_legacy_mac_config - mac80211 config callback
- */
-int iwl_legacy_mac_config(struct ieee80211_hw *hw, u32 changed)
-{
- struct iwl_priv *priv = hw->priv;
- const struct iwl_channel_info *ch_info;
- struct ieee80211_conf *conf = &hw->conf;
- struct ieee80211_channel *channel = conf->channel;
- struct iwl_ht_config *ht_conf = &priv->current_ht_config;
- struct iwl_rxon_context *ctx;
- unsigned long flags = 0;
- int ret = 0;
- u16 ch;
- int scan_active = 0;
- bool ht_changed[NUM_IWL_RXON_CTX] = {};
-
- if (WARN_ON(!priv->cfg->ops->legacy))
- return -EOPNOTSUPP;
-
- mutex_lock(&priv->mutex);
-
- IWL_DEBUG_MAC80211(priv, "enter to channel %d changed 0x%X\n",
- channel->hw_value, changed);
-
- if (unlikely(test_bit(STATUS_SCANNING, &priv->status))) {
- scan_active = 1;
- IWL_DEBUG_MAC80211(priv, "scan active\n");
- }
-
- if (changed & (IEEE80211_CONF_CHANGE_SMPS |
- IEEE80211_CONF_CHANGE_CHANNEL)) {
- /* mac80211 uses static for non-HT which is what we want */
- priv->current_ht_config.smps = conf->smps_mode;
-
- /*
- * Recalculate chain counts.
- *
- * If monitor mode is enabled then mac80211 will
- * set up the SM PS mode to OFF if an HT channel is
- * configured.
- */
- if (priv->cfg->ops->hcmd->set_rxon_chain)
- for_each_context(priv, ctx)
- priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx);
- }
-
- /* during scanning mac80211 will delay channel setting until
- * scan finish with changed = 0
- */
- if (!changed || (changed & IEEE80211_CONF_CHANGE_CHANNEL)) {
- if (scan_active)
- goto set_ch_out;
-
- ch = channel->hw_value;
- ch_info = iwl_get_channel_info(priv, channel->band, ch);
- if (!is_channel_valid(ch_info)) {
- IWL_DEBUG_MAC80211(priv, "leave - invalid channel\n");
- ret = -EINVAL;
- goto set_ch_out;
- }
-
- spin_lock_irqsave(&priv->lock, flags);
-
- for_each_context(priv, ctx) {
- /* Configure HT40 channels */
- if (ctx->ht.enabled != conf_is_ht(conf)) {
- ctx->ht.enabled = conf_is_ht(conf);
- ht_changed[ctx->ctxid] = true;
- }
- if (ctx->ht.enabled) {
- if (conf_is_ht40_minus(conf)) {
- ctx->ht.extension_chan_offset =
- IEEE80211_HT_PARAM_CHA_SEC_BELOW;
- ctx->ht.is_40mhz = true;
- } else if (conf_is_ht40_plus(conf)) {
- ctx->ht.extension_chan_offset =
- IEEE80211_HT_PARAM_CHA_SEC_ABOVE;
- ctx->ht.is_40mhz = true;
- } else {
- ctx->ht.extension_chan_offset =
- IEEE80211_HT_PARAM_CHA_SEC_NONE;
- ctx->ht.is_40mhz = false;
- }
- } else
- ctx->ht.is_40mhz = false;
-
- /*
- * Default to no protection. Protection mode will
- * later be set from BSS config in iwl_ht_conf
- */
- ctx->ht.protection = IEEE80211_HT_OP_MODE_PROTECTION_NONE;
-
- /* if we are switching from ht to 2.4 clear flags
- * from any ht related info since 2.4 does not
- * support ht */
- if ((le16_to_cpu(ctx->staging.channel) != ch))
- ctx->staging.flags = 0;
-
- iwl_set_rxon_channel(priv, channel, ctx);
- iwl_set_rxon_ht(priv, ht_conf);
-
- iwl_set_flags_for_band(priv, ctx, channel->band,
- ctx->vif);
- }
-
- spin_unlock_irqrestore(&priv->lock, flags);
-
- if (priv->cfg->ops->legacy->update_bcast_stations)
- ret = priv->cfg->ops->legacy->update_bcast_stations(priv);
-
- set_ch_out:
- /* The list of supported rates and rate mask can be different
- * for each band; since the band may have changed, reset
- * the rate mask to what mac80211 lists */
- iwl_set_rate(priv);
- }
-
- if (changed & (IEEE80211_CONF_CHANGE_PS |
- IEEE80211_CONF_CHANGE_IDLE)) {
- ret = iwl_power_update_mode(priv, false);
- if (ret)
- IWL_DEBUG_MAC80211(priv, "Error setting sleep level\n");
- }
-
- if (changed & IEEE80211_CONF_CHANGE_POWER) {
- IWL_DEBUG_MAC80211(priv, "TX Power old=%d new=%d\n",
- priv->tx_power_user_lmt, conf->power_level);
-
- iwl_set_tx_power(priv, conf->power_level, false);
- }
-
- if (!iwl_is_ready(priv)) {
- IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
- goto out;
- }
-
- if (scan_active)
- goto out;
-
- for_each_context(priv, ctx) {
- if (memcmp(&ctx->active, &ctx->staging, sizeof(ctx->staging)))
- iwlcore_commit_rxon(priv, ctx);
- else
- IWL_DEBUG_INFO(priv,
- "Not re-sending same RXON configuration.\n");
- if (ht_changed[ctx->ctxid])
- iwl_update_qos(priv, ctx);
- }
-
-out:
- IWL_DEBUG_MAC80211(priv, "leave\n");
- mutex_unlock(&priv->mutex);
- return ret;
-}
-EXPORT_SYMBOL(iwl_legacy_mac_config);
-
-void iwl_legacy_mac_reset_tsf(struct ieee80211_hw *hw)
-{
- struct iwl_priv *priv = hw->priv;
- unsigned long flags;
- /* IBSS can only be the IWL_RXON_CTX_BSS context */
- struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
-
- if (WARN_ON(!priv->cfg->ops->legacy))
- return;
-
- mutex_lock(&priv->mutex);
- IWL_DEBUG_MAC80211(priv, "enter\n");
-
- spin_lock_irqsave(&priv->lock, flags);
- memset(&priv->current_ht_config, 0, sizeof(struct iwl_ht_config));
- spin_unlock_irqrestore(&priv->lock, flags);
-
- spin_lock_irqsave(&priv->lock, flags);
-
- /* new association get rid of ibss beacon skb */
- if (priv->beacon_skb)
- dev_kfree_skb(priv->beacon_skb);
-
- priv->beacon_skb = NULL;
-
- priv->timestamp = 0;
-
- spin_unlock_irqrestore(&priv->lock, flags);
-
- iwl_scan_cancel_timeout(priv, 100);
- if (!iwl_is_ready_rf(priv)) {
- IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
- mutex_unlock(&priv->mutex);
- return;
- }
-
- /* we are restarting association process
- * clear RXON_FILTER_ASSOC_MSK bit
- */
- ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
- iwlcore_commit_rxon(priv, ctx);
-
- iwl_set_rate(priv);
-
- mutex_unlock(&priv->mutex);
-
- IWL_DEBUG_MAC80211(priv, "leave\n");
-}
-EXPORT_SYMBOL(iwl_legacy_mac_reset_tsf);
-
-static void iwl_ht_conf(struct iwl_priv *priv,
- struct ieee80211_vif *vif)
-{
- struct iwl_ht_config *ht_conf = &priv->current_ht_config;
- struct ieee80211_sta *sta;
- struct ieee80211_bss_conf *bss_conf = &vif->bss_conf;
- struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif);
-
- IWL_DEBUG_ASSOC(priv, "enter:\n");
-
- if (!ctx->ht.enabled)
- return;
-
- ctx->ht.protection =
- bss_conf->ht_operation_mode & IEEE80211_HT_OP_MODE_PROTECTION;
- ctx->ht.non_gf_sta_present =
- !!(bss_conf->ht_operation_mode & IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT);
-
- ht_conf->single_chain_sufficient = false;
-
- switch (vif->type) {
- case NL80211_IFTYPE_STATION:
- rcu_read_lock();
- sta = ieee80211_find_sta(vif, bss_conf->bssid);
- if (sta) {
- struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
- int maxstreams;
-
- maxstreams = (ht_cap->mcs.tx_params &
- IEEE80211_HT_MCS_TX_MAX_STREAMS_MASK)
- >> IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT;
- maxstreams += 1;
-
- if ((ht_cap->mcs.rx_mask[1] == 0) &&
- (ht_cap->mcs.rx_mask[2] == 0))
- ht_conf->single_chain_sufficient = true;
- if (maxstreams <= 1)
- ht_conf->single_chain_sufficient = true;
- } else {
- /*
- * If at all, this can only happen through a race
- * when the AP disconnects us while we're still
- * setting up the connection, in that case mac80211
- * will soon tell us about that.
- */
- ht_conf->single_chain_sufficient = true;
- }
- rcu_read_unlock();
- break;
- case NL80211_IFTYPE_ADHOC:
- ht_conf->single_chain_sufficient = true;
- break;
- default:
- break;
- }
-
- IWL_DEBUG_ASSOC(priv, "leave\n");
-}
-
-static inline void iwl_set_no_assoc(struct iwl_priv *priv,
- struct ieee80211_vif *vif)
-{
- struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif);
-
- /*
- * inform the ucode that there is no longer an
- * association and that no more packets should be
- * sent
- */
- ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
- ctx->staging.assoc_id = 0;
- iwlcore_commit_rxon(priv, ctx);
-}
-
-static void iwlcore_beacon_update(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif)
-{
- struct iwl_priv *priv = hw->priv;
- unsigned long flags;
- __le64 timestamp;
- struct sk_buff *skb = ieee80211_beacon_get(hw, vif);
-
- if (!skb)
- return;
-
- IWL_DEBUG_MAC80211(priv, "enter\n");
-
- lockdep_assert_held(&priv->mutex);
-
- if (!priv->beacon_ctx) {
- IWL_ERR(priv, "update beacon but no beacon context!\n");
- dev_kfree_skb(skb);
- return;
- }
-
- spin_lock_irqsave(&priv->lock, flags);
-
- if (priv->beacon_skb)
- dev_kfree_skb(priv->beacon_skb);
-
- priv->beacon_skb = skb;
-
- timestamp = ((struct ieee80211_mgmt *)skb->data)->u.beacon.timestamp;
- priv->timestamp = le64_to_cpu(timestamp);
-
- IWL_DEBUG_MAC80211(priv, "leave\n");
- spin_unlock_irqrestore(&priv->lock, flags);
-
- if (!iwl_is_ready_rf(priv)) {
- IWL_DEBUG_MAC80211(priv, "leave - RF not ready\n");
- return;
- }
-
- priv->cfg->ops->legacy->post_associate(priv);
-}
-
-void iwl_legacy_mac_bss_info_changed(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct ieee80211_bss_conf *bss_conf,
- u32 changes)
-{
- struct iwl_priv *priv = hw->priv;
- struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif);
- int ret;
-
- if (WARN_ON(!priv->cfg->ops->legacy))
- return;
-
- IWL_DEBUG_MAC80211(priv, "changes = 0x%X\n", changes);
-
- if (!iwl_is_alive(priv))
- return;
-
- mutex_lock(&priv->mutex);
-
- if (changes & BSS_CHANGED_QOS) {
- unsigned long flags;
-
- spin_lock_irqsave(&priv->lock, flags);
- ctx->qos_data.qos_active = bss_conf->qos;
- iwl_update_qos(priv, ctx);
- spin_unlock_irqrestore(&priv->lock, flags);
- }
-
- if (changes & BSS_CHANGED_BEACON_ENABLED) {
- /*
- * the add_interface code must make sure we only ever
- * have a single interface that could be beaconing at
- * any time.
- */
- if (vif->bss_conf.enable_beacon)
- priv->beacon_ctx = ctx;
- else
- priv->beacon_ctx = NULL;
- }
-
- if (changes & BSS_CHANGED_BEACON && vif->type == NL80211_IFTYPE_AP) {
- dev_kfree_skb(priv->beacon_skb);
- priv->beacon_skb = ieee80211_beacon_get(hw, vif);
- }
-
- if (changes & BSS_CHANGED_BEACON_INT && vif->type == NL80211_IFTYPE_AP)
- iwl_send_rxon_timing(priv, ctx);
-
- if (changes & BSS_CHANGED_BSSID) {
- IWL_DEBUG_MAC80211(priv, "BSSID %pM\n", bss_conf->bssid);
-
- /*
- * If there is currently a HW scan going on in the
- * background then we need to cancel it else the RXON
- * below/in post_associate will fail.
- */
- if (iwl_scan_cancel_timeout(priv, 100)) {
- IWL_WARN(priv, "Aborted scan still in progress after 100ms\n");
- IWL_DEBUG_MAC80211(priv, "leaving - scan abort failed.\n");
- mutex_unlock(&priv->mutex);
- return;
- }
-
- /* mac80211 only sets assoc when in STATION mode */
- if (vif->type == NL80211_IFTYPE_ADHOC || bss_conf->assoc) {
- memcpy(ctx->staging.bssid_addr,
- bss_conf->bssid, ETH_ALEN);
-
- /* currently needed in a few places */
- memcpy(priv->bssid, bss_conf->bssid, ETH_ALEN);
- } else {
- ctx->staging.filter_flags &=
- ~RXON_FILTER_ASSOC_MSK;
- }
-
- }
-
- /*
- * This needs to be after setting the BSSID in case
- * mac80211 decides to do both changes at once because
- * it will invoke post_associate.
- */
- if (vif->type == NL80211_IFTYPE_ADHOC && changes & BSS_CHANGED_BEACON)
- iwlcore_beacon_update(hw, vif);
-
- if (changes & BSS_CHANGED_ERP_PREAMBLE) {
- IWL_DEBUG_MAC80211(priv, "ERP_PREAMBLE %d\n",
- bss_conf->use_short_preamble);
- if (bss_conf->use_short_preamble)
- ctx->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
- else
- ctx->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
- }
-
- if (changes & BSS_CHANGED_ERP_CTS_PROT) {
- IWL_DEBUG_MAC80211(priv, "ERP_CTS %d\n", bss_conf->use_cts_prot);
- if (bss_conf->use_cts_prot && (priv->band != IEEE80211_BAND_5GHZ))
- ctx->staging.flags |= RXON_FLG_TGG_PROTECT_MSK;
- else
- ctx->staging.flags &= ~RXON_FLG_TGG_PROTECT_MSK;
- if (bss_conf->use_cts_prot)
- ctx->staging.flags |= RXON_FLG_SELF_CTS_EN;
- else
- ctx->staging.flags &= ~RXON_FLG_SELF_CTS_EN;
- }
-
- if (changes & BSS_CHANGED_BASIC_RATES) {
- /* XXX use this information
- *
- * To do that, remove code from iwl_set_rate() and put something
- * like this here:
- *
- if (A-band)
- ctx->staging.ofdm_basic_rates =
- bss_conf->basic_rates;
- else
- ctx->staging.ofdm_basic_rates =
- bss_conf->basic_rates >> 4;
- ctx->staging.cck_basic_rates =
- bss_conf->basic_rates & 0xF;
- */
- }
-
- if (changes & BSS_CHANGED_HT) {
- iwl_ht_conf(priv, vif);
-
- if (priv->cfg->ops->hcmd->set_rxon_chain)
- priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx);
- }
-
- if (changes & BSS_CHANGED_ASSOC) {
- IWL_DEBUG_MAC80211(priv, "ASSOC %d\n", bss_conf->assoc);
- if (bss_conf->assoc) {
- priv->timestamp = bss_conf->timestamp;
-
- if (!iwl_is_rfkill(priv))
- priv->cfg->ops->legacy->post_associate(priv);
- } else
- iwl_set_no_assoc(priv, vif);
- }
-
- if (changes && iwl_is_associated_ctx(ctx) && bss_conf->aid) {
- IWL_DEBUG_MAC80211(priv, "Changes (%#x) while associated\n",
- changes);
- ret = iwl_send_rxon_assoc(priv, ctx);
- if (!ret) {
- /* Sync active_rxon with latest change. */
- memcpy((void *)&ctx->active,
- &ctx->staging,
- sizeof(struct iwl_rxon_cmd));
- }
- }
-
- if (changes & BSS_CHANGED_BEACON_ENABLED) {
- if (vif->bss_conf.enable_beacon) {
- memcpy(ctx->staging.bssid_addr,
- bss_conf->bssid, ETH_ALEN);
- memcpy(priv->bssid, bss_conf->bssid, ETH_ALEN);
- priv->cfg->ops->legacy->config_ap(priv);
- } else
- iwl_set_no_assoc(priv, vif);
- }
-
- if (changes & BSS_CHANGED_IBSS) {
- ret = priv->cfg->ops->legacy->manage_ibss_station(priv, vif,
- bss_conf->ibss_joined);
- if (ret)
- IWL_ERR(priv, "failed to %s IBSS station %pM\n",
- bss_conf->ibss_joined ? "add" : "remove",
- bss_conf->bssid);
- }
-
- mutex_unlock(&priv->mutex);
-
- IWL_DEBUG_MAC80211(priv, "leave\n");
-}
-EXPORT_SYMBOL(iwl_legacy_mac_bss_info_changed);
-
-irqreturn_t iwl_isr_legacy(int irq, void *data)
-{
- struct iwl_priv *priv = data;
- u32 inta, inta_mask;
- u32 inta_fh;
- unsigned long flags;
- if (!priv)
- return IRQ_NONE;
-
- spin_lock_irqsave(&priv->lock, flags);
-
- /* Disable (but don't clear!) interrupts here to avoid
- * back-to-back ISRs and sporadic interrupts from our NIC.
- * If we have something to service, the tasklet will re-enable ints.
- * If we *don't* have something, we'll re-enable before leaving here. */
- inta_mask = iwl_read32(priv, CSR_INT_MASK); /* just for debug */
- iwl_write32(priv, CSR_INT_MASK, 0x00000000);
-
- /* Discover which interrupts are active/pending */
- inta = iwl_read32(priv, CSR_INT);
- inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
-
- /* Ignore interrupt if there's nothing in NIC to service.
- * This may be due to IRQ shared with another device,
- * or due to sporadic interrupts thrown from our NIC. */
- if (!inta && !inta_fh) {
- IWL_DEBUG_ISR(priv,
- "Ignore interrupt, inta == 0, inta_fh == 0\n");
- goto none;
- }
-
- if ((inta == 0xFFFFFFFF) || ((inta & 0xFFFFFFF0) == 0xa5a5a5a0)) {
- /* Hardware disappeared. It might have already raised
- * an interrupt */
- IWL_WARN(priv, "HARDWARE GONE?? INTA == 0x%08x\n", inta);
- goto unplugged;
- }
-
- IWL_DEBUG_ISR(priv, "ISR inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
- inta, inta_mask, inta_fh);
-
- inta &= ~CSR_INT_BIT_SCD;
-
- /* iwl_irq_tasklet() will service interrupts and re-enable them */
- if (likely(inta || inta_fh))
- tasklet_schedule(&priv->irq_tasklet);
-
-unplugged:
- spin_unlock_irqrestore(&priv->lock, flags);
- return IRQ_HANDLED;
-
-none:
- /* re-enable interrupts here since we don't have anything to service. */
- /* only Re-enable if disabled by irq */
- if (test_bit(STATUS_INT_ENABLED, &priv->status))
- iwl_enable_interrupts(priv);
- spin_unlock_irqrestore(&priv->lock, flags);
- return IRQ_NONE;
-}
-EXPORT_SYMBOL(iwl_isr_legacy);
-
-/*
- * iwl_legacy_tx_cmd_protection: Set rts/cts. 3945 and 4965 only share this
- * function.
- */
-void iwl_legacy_tx_cmd_protection(struct iwl_priv *priv,
- struct ieee80211_tx_info *info,
- __le16 fc, __le32 *tx_flags)
-{
- if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) {
- *tx_flags |= TX_CMD_FLG_RTS_MSK;
- *tx_flags &= ~TX_CMD_FLG_CTS_MSK;
- *tx_flags |= TX_CMD_FLG_FULL_TXOP_PROT_MSK;
-
- if (!ieee80211_is_mgmt(fc))
- return;
-
- switch (fc & cpu_to_le16(IEEE80211_FCTL_STYPE)) {
- case cpu_to_le16(IEEE80211_STYPE_AUTH):
- case cpu_to_le16(IEEE80211_STYPE_DEAUTH):
- case cpu_to_le16(IEEE80211_STYPE_ASSOC_REQ):
- case cpu_to_le16(IEEE80211_STYPE_REASSOC_REQ):
- *tx_flags &= ~TX_CMD_FLG_RTS_MSK;
- *tx_flags |= TX_CMD_FLG_CTS_MSK;
- break;
- }
- } else if (info->control.rates[0].flags &
- IEEE80211_TX_RC_USE_CTS_PROTECT) {
- *tx_flags &= ~TX_CMD_FLG_RTS_MSK;
- *tx_flags |= TX_CMD_FLG_CTS_MSK;
- *tx_flags |= TX_CMD_FLG_FULL_TXOP_PROT_MSK;
- }
-}
-EXPORT_SYMBOL(iwl_legacy_tx_cmd_protection);
diff --git a/drivers/net/wireless/iwlwifi/iwl-legacy.h b/drivers/net/wireless/iwlwifi/iwl-legacy.h
deleted file mode 100644
index 9f7b2f9..0000000
--- a/drivers/net/wireless/iwlwifi/iwl-legacy.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/******************************************************************************
- *
- * This file is provided under a dual BSD/GPLv2 license. When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
- * USA
- *
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * Contact Information:
- * Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- * BSD LICENSE
- *
- * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *****************************************************************************/
-
-#ifndef __iwl_legacy_h__
-#define __iwl_legacy_h__
-
-/* mac80211 handlers */
-int iwl_legacy_mac_config(struct ieee80211_hw *hw, u32 changed);
-void iwl_legacy_mac_reset_tsf(struct ieee80211_hw *hw);
-void iwl_legacy_mac_bss_info_changed(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct ieee80211_bss_conf *bss_conf,
- u32 changes);
-void iwl_legacy_tx_cmd_protection(struct iwl_priv *priv,
- struct ieee80211_tx_info *info,
- __le16 fc, __le32 *tx_flags);
-
-irqreturn_t iwl_isr_legacy(int irq, void *data);
-
-#endif /* __iwl_legacy_h__ */
diff --git a/drivers/net/wireless/iwlwifi/iwl-power.c b/drivers/net/wireless/iwlwifi/iwl-power.c
index 1d1bf32..576795e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-power.c
+++ b/drivers/net/wireless/iwlwifi/iwl-power.c
@@ -425,7 +425,6 @@ int iwl_power_set_mode(struct iwl_priv *priv, struct iwl_powertable_cmd *cmd,
return ret;
}
-EXPORT_SYMBOL(iwl_power_set_mode);
int iwl_power_update_mode(struct iwl_priv *priv, bool force)
{
@@ -434,7 +433,6 @@ int iwl_power_update_mode(struct iwl_priv *priv, bool force)
iwl_power_build_cmd(priv, &cmd);
return iwl_power_set_mode(priv, &cmd, force);
}
-EXPORT_SYMBOL(iwl_power_update_mode);
/* initialize to default */
void iwl_power_initialize(struct iwl_priv *priv)
@@ -448,4 +446,3 @@ void iwl_power_initialize(struct iwl_priv *priv)
memset(&priv->power_data.sleep_cmd, 0,
sizeof(priv->power_data.sleep_cmd));
}
-EXPORT_SYMBOL(iwl_power_initialize);
diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c
index bc89393..a21f6fe 100644
--- a/drivers/net/wireless/iwlwifi/iwl-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-rx.c
@@ -118,7 +118,6 @@ int iwl_rx_queue_space(const struct iwl_rx_queue *q)
s = 0;
return s;
}
-EXPORT_SYMBOL(iwl_rx_queue_space);
/**
* iwl_rx_queue_update_write_ptr - Update the write pointer for the RX queue
@@ -170,7 +169,6 @@ void iwl_rx_queue_update_write_ptr(struct iwl_priv *priv, struct iwl_rx_queue *q
exit_unlock:
spin_unlock_irqrestore(&q->lock, flags);
}
-EXPORT_SYMBOL(iwl_rx_queue_update_write_ptr);
int iwl_rx_queue_alloc(struct iwl_priv *priv)
{
@@ -211,7 +209,6 @@ err_rb:
err_bd:
return -ENOMEM;
}
-EXPORT_SYMBOL(iwl_rx_queue_alloc);
void iwl_rx_spectrum_measure_notif(struct iwl_priv *priv,
@@ -229,7 +226,6 @@ void iwl_rx_spectrum_measure_notif(struct iwl_priv *priv,
memcpy(&priv->measure_report, report, sizeof(*report));
priv->measurement_status |= MEASUREMENT_READY;
}
-EXPORT_SYMBOL(iwl_rx_spectrum_measure_notif);
void iwl_recover_from_statistics(struct iwl_priv *priv,
struct iwl_rx_packet *pkt)
@@ -249,7 +245,6 @@ void iwl_recover_from_statistics(struct iwl_priv *priv,
!priv->cfg->ops->lib->check_plcp_health(priv, pkt))
iwl_force_reset(priv, IWL_RF_RESET, false);
}
-EXPORT_SYMBOL(iwl_recover_from_statistics);
/*
* returns non-zero if packet should be dropped
@@ -302,4 +297,3 @@ int iwl_set_decrypted_flag(struct iwl_priv *priv,
}
return 0;
}
-EXPORT_SYMBOL(iwl_set_decrypted_flag);
diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c
index 08f1bea..faa6d34 100644
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ b/drivers/net/wireless/iwlwifi/iwl-scan.c
@@ -155,7 +155,6 @@ int iwl_scan_cancel(struct iwl_priv *priv)
queue_work(priv->workqueue, &priv->abort_scan);
return 0;
}
-EXPORT_SYMBOL(iwl_scan_cancel);
/**
* iwl_scan_cancel_timeout - Cancel any currently executing HW scan
@@ -180,7 +179,6 @@ int iwl_scan_cancel_timeout(struct iwl_priv *priv, unsigned long ms)
return test_bit(STATUS_SCAN_HW, &priv->status);
}
-EXPORT_SYMBOL(iwl_scan_cancel_timeout);
/* Service response to REPLY_SCAN_CMD (0x80) */
static void iwl_rx_reply_scan(struct iwl_priv *priv,
@@ -288,7 +286,6 @@ void iwl_setup_rx_scan_handlers(struct iwl_priv *priv)
priv->rx_handlers[SCAN_COMPLETE_NOTIFICATION] =
iwl_rx_scan_complete_notif;
}
-EXPORT_SYMBOL(iwl_setup_rx_scan_handlers);
inline u16 iwl_get_active_dwell_time(struct iwl_priv *priv,
enum ieee80211_band band,
@@ -301,7 +298,6 @@ inline u16 iwl_get_active_dwell_time(struct iwl_priv *priv,
return IWL_ACTIVE_DWELL_TIME_24 +
IWL_ACTIVE_DWELL_FACTOR_24GHZ * (n_probes + 1);
}
-EXPORT_SYMBOL(iwl_get_active_dwell_time);
u16 iwl_get_passive_dwell_time(struct iwl_priv *priv,
enum ieee80211_band band,
@@ -333,7 +329,6 @@ u16 iwl_get_passive_dwell_time(struct iwl_priv *priv,
return passive;
}
-EXPORT_SYMBOL(iwl_get_passive_dwell_time);
void iwl_init_scan_params(struct iwl_priv *priv)
{
@@ -343,7 +338,6 @@ void iwl_init_scan_params(struct iwl_priv *priv)
if (!priv->scan_tx_ant[IEEE80211_BAND_2GHZ])
priv->scan_tx_ant[IEEE80211_BAND_2GHZ] = ant_idx;
}
-EXPORT_SYMBOL(iwl_init_scan_params);
static int __must_check iwl_scan_initiate(struct iwl_priv *priv,
struct ieee80211_vif *vif,
@@ -439,7 +433,6 @@ out_unlock:
return ret;
}
-EXPORT_SYMBOL(iwl_mac_hw_scan);
/*
* internal short scan, this function should only been called while associated.
@@ -536,7 +529,6 @@ u16 iwl_fill_probe_req(struct iwl_priv *priv, struct ieee80211_mgmt *frame,
return (u16)len;
}
-EXPORT_SYMBOL(iwl_fill_probe_req);
static void iwl_bg_abort_scan(struct work_struct *work)
{
@@ -621,7 +613,6 @@ void iwl_setup_scan_deferred_work(struct iwl_priv *priv)
INIT_WORK(&priv->start_internal_scan, iwl_bg_start_internal_scan);
INIT_DELAYED_WORK(&priv->scan_check, iwl_bg_scan_check);
}
-EXPORT_SYMBOL(iwl_setup_scan_deferred_work);
void iwl_cancel_scan_deferred_work(struct iwl_priv *priv)
{
@@ -635,4 +626,3 @@ void iwl_cancel_scan_deferred_work(struct iwl_priv *priv)
mutex_unlock(&priv->mutex);
}
}
-EXPORT_SYMBOL(iwl_cancel_scan_deferred_work);
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c
index 49493d1..bc90a12 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.c
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.c
@@ -169,7 +169,6 @@ int iwl_send_add_sta(struct iwl_priv *priv,
return ret;
}
-EXPORT_SYMBOL(iwl_send_add_sta);
static void iwl_set_ht_add_station(struct iwl_priv *priv, u8 index,
struct ieee80211_sta *sta,
@@ -316,7 +315,6 @@ u8 iwl_prep_station(struct iwl_priv *priv, struct iwl_rxon_context *ctx,
return sta_id;
}
-EXPORT_SYMBOL_GPL(iwl_prep_station);
#define STA_WAIT_TIMEOUT (HZ/2)
@@ -379,7 +377,6 @@ int iwl_add_station_common(struct iwl_priv *priv, struct iwl_rxon_context *ctx,
*sta_id_r = sta_id;
return ret;
}
-EXPORT_SYMBOL(iwl_add_station_common);
/**
* iwl_sta_ucode_deactivate - deactivate ucode status for a station
@@ -513,7 +510,6 @@ out_err:
spin_unlock_irqrestore(&priv->sta_lock, flags);
return -EINVAL;
}
-EXPORT_SYMBOL_GPL(iwl_remove_station);
/**
* iwl_clear_ucode_stations - clear ucode station table bits
@@ -548,7 +544,6 @@ void iwl_clear_ucode_stations(struct iwl_priv *priv,
if (!cleared)
IWL_DEBUG_INFO(priv, "No active stations found to be cleared\n");
}
-EXPORT_SYMBOL(iwl_clear_ucode_stations);
/**
* iwl_restore_stations() - Restore driver known stations to device
@@ -625,7 +620,6 @@ void iwl_restore_stations(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
else
IWL_DEBUG_INFO(priv, "Restoring all known stations .... complete.\n");
}
-EXPORT_SYMBOL(iwl_restore_stations);
void iwl_reprogram_ap_sta(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
{
@@ -668,7 +662,6 @@ void iwl_reprogram_ap_sta(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
priv->stations[sta_id].sta.sta.addr, ret);
iwl_send_lq_cmd(priv, ctx, &lq, CMD_SYNC, true);
}
-EXPORT_SYMBOL(iwl_reprogram_ap_sta);
int iwl_get_free_ucode_key_index(struct iwl_priv *priv)
{
@@ -680,7 +673,6 @@ int iwl_get_free_ucode_key_index(struct iwl_priv *priv)
return WEP_INVALID_OFFSET;
}
-EXPORT_SYMBOL(iwl_get_free_ucode_key_index);
void iwl_dealloc_bcast_stations(struct iwl_priv *priv)
{
@@ -700,7 +692,6 @@ void iwl_dealloc_bcast_stations(struct iwl_priv *priv)
}
spin_unlock_irqrestore(&priv->sta_lock, flags);
}
-EXPORT_SYMBOL_GPL(iwl_dealloc_bcast_stations);
#ifdef CONFIG_IWLWIFI_DEBUG
static void iwl_dump_lq_cmd(struct iwl_priv *priv,
@@ -810,7 +801,6 @@ int iwl_send_lq_cmd(struct iwl_priv *priv, struct iwl_rxon_context *ctx,
}
return ret;
}
-EXPORT_SYMBOL(iwl_send_lq_cmd);
int iwl_mac_sta_remove(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
@@ -832,4 +822,3 @@ int iwl_mac_sta_remove(struct ieee80211_hw *hw,
mutex_unlock(&priv->mutex);
return ret;
}
-EXPORT_SYMBOL(iwl_mac_sta_remove);
diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c
index 073b6ce..7e607d3 100644
--- a/drivers/net/wireless/iwlwifi/iwl-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-tx.c
@@ -84,7 +84,6 @@ void iwl_txq_update_write_ptr(struct iwl_priv *priv, struct iwl_tx_queue *txq)
}
txq->need_update = 0;
}
-EXPORT_SYMBOL(iwl_txq_update_write_ptr);
/**
* iwl_tx_queue_free - Deallocate DMA queue.
@@ -131,7 +130,6 @@ void iwl_tx_queue_free(struct iwl_priv *priv, int txq_id)
/* 0-fill queue descriptor structure */
memset(txq, 0, sizeof(*txq));
}
-EXPORT_SYMBOL(iwl_tx_queue_free);
/**
* iwl_cmd_queue_free - Deallocate DMA queue.
@@ -193,7 +191,6 @@ void iwl_cmd_queue_free(struct iwl_priv *priv)
/* 0-fill queue descriptor structure */
memset(txq, 0, sizeof(*txq));
}
-EXPORT_SYMBOL(iwl_cmd_queue_free);
/*************** DMA-QUEUE-GENERAL-FUNCTIONS *****
* DMA services
@@ -233,7 +230,6 @@ int iwl_queue_space(const struct iwl_queue *q)
s = 0;
return s;
}
-EXPORT_SYMBOL(iwl_queue_space);
/**
@@ -384,7 +380,6 @@ out_free_arrays:
return -ENOMEM;
}
-EXPORT_SYMBOL(iwl_tx_queue_init);
void iwl_tx_queue_reset(struct iwl_priv *priv, struct iwl_tx_queue *txq,
int slots_num, u32 txq_id)
@@ -404,7 +399,6 @@ void iwl_tx_queue_reset(struct iwl_priv *priv, struct iwl_tx_queue *txq,
/* Tell device where to find queue */
priv->cfg->ops->lib->txq_init(priv, txq);
}
-EXPORT_SYMBOL(iwl_tx_queue_reset);
/*************** HOST COMMAND QUEUE FUNCTIONS *****/
@@ -641,4 +635,3 @@ void iwl_tx_cmd_complete(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb)
}
meta->flags = 0;
}
-EXPORT_SYMBOL(iwl_tx_cmd_complete);
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
deleted file mode 100644
index adcef73..0000000
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ /dev/null
@@ -1,4334 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
- *
- * Portions of this file are derived from the ipw3945 project, as well
- * as portions of the ieee80211 subsystem header files.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- * The full GNU General Public License is included in this distribution in the
- * file called LICENSE.
- *
- * Contact Information:
- * Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- *****************************************************************************/
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/pci-aspm.h>
-#include <linux/slab.h>
-#include <linux/dma-mapping.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-#include <linux/skbuff.h>
-#include <linux/netdevice.h>
-#include <linux/wireless.h>
-#include <linux/firmware.h>
-#include <linux/etherdevice.h>
-#include <linux/if_arp.h>
-
-#include <net/ieee80211_radiotap.h>
-#include <net/mac80211.h>
-
-#include <asm/div64.h>
-
-#define DRV_NAME "iwl3945"
-
-#include "iwl-fh.h"
-#include "iwl-3945-fh.h"
-#include "iwl-commands.h"
-#include "iwl-sta.h"
-#include "iwl-3945.h"
-#include "iwl-core.h"
-#include "iwl-helpers.h"
-#include "iwl-dev.h"
-#include "iwl-spectrum.h"
-#include "iwl-legacy.h"
-
-/*
- * module name, copyright, version, etc.
- */
-
-#define DRV_DESCRIPTION \
-"Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux"
-
-#ifdef CONFIG_IWLWIFI_DEBUG
-#define VD "d"
-#else
-#define VD
-#endif
-
-/*
- * add "s" to indicate spectrum measurement included.
- * we add it here to be consistent with previous releases in which
- * this was configurable.
- */
-#define DRV_VERSION IWLWIFI_VERSION VD "s"
-#define DRV_COPYRIGHT "Copyright(c) 2003-2010 Intel Corporation"
-#define DRV_AUTHOR "<ilw@linux.intel.com>"
-
-MODULE_DESCRIPTION(DRV_DESCRIPTION);
-MODULE_VERSION(DRV_VERSION);
-MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR);
-MODULE_LICENSE("GPL");
-
- /* module parameters */
-struct iwl_mod_params iwl3945_mod_params = {
- .sw_crypto = 1,
- .restart_fw = 1,
- /* the rest are 0 by default */
-};
-
-/**
- * iwl3945_get_antenna_flags - Get antenna flags for RXON command
- * @priv: eeprom and antenna fields are used to determine antenna flags
- *
- * priv->eeprom39 is used to determine if antenna AUX/MAIN are reversed
- * iwl3945_mod_params.antenna specifies the antenna diversity mode:
- *
- * IWL_ANTENNA_DIVERSITY - NIC selects best antenna by itself
- * IWL_ANTENNA_MAIN - Force MAIN antenna
- * IWL_ANTENNA_AUX - Force AUX antenna
- */
-__le32 iwl3945_get_antenna_flags(const struct iwl_priv *priv)
-{
- struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom;
-
- switch (iwl3945_mod_params.antenna) {
- case IWL_ANTENNA_DIVERSITY:
- return 0;
-
- case IWL_ANTENNA_MAIN:
- if (eeprom->antenna_switch_type)
- return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_B_MSK;
- return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_A_MSK;
-
- case IWL_ANTENNA_AUX:
- if (eeprom->antenna_switch_type)
- return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_A_MSK;
- return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_B_MSK;
- }
-
- /* bad antenna selector value */
- IWL_ERR(priv, "Bad antenna selector value (0x%x)\n",
- iwl3945_mod_params.antenna);
-
- return 0; /* "diversity" is default if error */
-}
-
-static int iwl3945_set_ccmp_dynamic_key_info(struct iwl_priv *priv,
- struct ieee80211_key_conf *keyconf,
- u8 sta_id)
-{
- unsigned long flags;
- __le16 key_flags = 0;
- int ret;
-
- key_flags |= (STA_KEY_FLG_CCMP | STA_KEY_FLG_MAP_KEY_MSK);
- key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS);
-
- if (sta_id == priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id)
- key_flags |= STA_KEY_MULTICAST_MSK;
-
- keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
- keyconf->hw_key_idx = keyconf->keyidx;
- key_flags &= ~STA_KEY_FLG_INVALID;
-
- spin_lock_irqsave(&priv->sta_lock, flags);
- priv->stations[sta_id].keyinfo.cipher = keyconf->cipher;
- priv->stations[sta_id].keyinfo.keylen = keyconf->keylen;
- memcpy(priv->stations[sta_id].keyinfo.key, keyconf->key,
- keyconf->keylen);
-
- memcpy(priv->stations[sta_id].sta.key.key, keyconf->key,
- keyconf->keylen);
-
- if ((priv->stations[sta_id].sta.key.key_flags & STA_KEY_FLG_ENCRYPT_MSK)
- == STA_KEY_FLG_NO_ENC)
- priv->stations[sta_id].sta.key.key_offset =
- iwl_get_free_ucode_key_index(priv);
- /* else, we are overriding an existing key => no need to allocated room
- * in uCode. */
-
- WARN(priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET,
- "no space for a new key");
-
- priv->stations[sta_id].sta.key.key_flags = key_flags;
- priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
- priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
-
- IWL_DEBUG_INFO(priv, "hwcrypto: modify ucode station key info\n");
-
- ret = iwl_send_add_sta(priv, &priv->stations[sta_id].sta, CMD_ASYNC);
-
- spin_unlock_irqrestore(&priv->sta_lock, flags);
-
- return ret;
-}
-
-static int iwl3945_set_tkip_dynamic_key_info(struct iwl_priv *priv,
- struct ieee80211_key_conf *keyconf,
- u8 sta_id)
-{
- return -EOPNOTSUPP;
-}
-
-static int iwl3945_set_wep_dynamic_key_info(struct iwl_priv *priv,
- struct ieee80211_key_conf *keyconf,
- u8 sta_id)
-{
- return -EOPNOTSUPP;
-}
-
-static int iwl3945_clear_sta_key_info(struct iwl_priv *priv, u8 sta_id)
-{
- unsigned long flags;
- struct iwl_addsta_cmd sta_cmd;
-
- spin_lock_irqsave(&priv->sta_lock, flags);
- memset(&priv->stations[sta_id].keyinfo, 0, sizeof(struct iwl_hw_key));
- memset(&priv->stations[sta_id].sta.key, 0,
- sizeof(struct iwl4965_keyinfo));
- priv->stations[sta_id].sta.key.key_flags = STA_KEY_FLG_NO_ENC;
- priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
- priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
- memcpy(&sta_cmd, &priv->stations[sta_id].sta, sizeof(struct iwl_addsta_cmd));
- spin_unlock_irqrestore(&priv->sta_lock, flags);
-
- IWL_DEBUG_INFO(priv, "hwcrypto: clear ucode station key info\n");
- return iwl_send_add_sta(priv, &sta_cmd, CMD_SYNC);
-}
-
-static int iwl3945_set_dynamic_key(struct iwl_priv *priv,
- struct ieee80211_key_conf *keyconf, u8 sta_id)
-{
- int ret = 0;
-
- keyconf->hw_key_idx = HW_KEY_DYNAMIC;
-
- switch (keyconf->cipher) {
- case WLAN_CIPHER_SUITE_CCMP:
- ret = iwl3945_set_ccmp_dynamic_key_info(priv, keyconf, sta_id);
- break;
- case WLAN_CIPHER_SUITE_TKIP:
- ret = iwl3945_set_tkip_dynamic_key_info(priv, keyconf, sta_id);
- break;
- case WLAN_CIPHER_SUITE_WEP40:
- case WLAN_CIPHER_SUITE_WEP104:
- ret = iwl3945_set_wep_dynamic_key_info(priv, keyconf, sta_id);
- break;
- default:
- IWL_ERR(priv, "Unknown alg: %s alg=%x\n", __func__,
- keyconf->cipher);
- ret = -EINVAL;
- }
-
- IWL_DEBUG_WEP(priv, "Set dynamic key: alg=%x len=%d idx=%d sta=%d ret=%d\n",
- keyconf->cipher, keyconf->keylen, keyconf->keyidx,
- sta_id, ret);
-
- return ret;
-}
-
-static int iwl3945_remove_static_key(struct iwl_priv *priv)
-{
- int ret = -EOPNOTSUPP;
-
- return ret;
-}
-
-static int iwl3945_set_static_key(struct iwl_priv *priv,
- struct ieee80211_key_conf *key)
-{
- if (key->cipher == WLAN_CIPHER_SUITE_WEP40 ||
- key->cipher == WLAN_CIPHER_SUITE_WEP104)
- return -EOPNOTSUPP;
-
- IWL_ERR(priv, "Static key invalid: cipher %x\n", key->cipher);
- return -EINVAL;
-}
-
-static void iwl3945_clear_free_frames(struct iwl_priv *priv)
-{
- struct list_head *element;
-
- IWL_DEBUG_INFO(priv, "%d frames on pre-allocated heap on clear.\n",
- priv->frames_count);
-
- while (!list_empty(&priv->free_frames)) {
- element = priv->free_frames.next;
- list_del(element);
- kfree(list_entry(element, struct iwl3945_frame, list));
- priv->frames_count--;
- }
-
- if (priv->frames_count) {
- IWL_WARN(priv, "%d frames still in use. Did we lose one?\n",
- priv->frames_count);
- priv->frames_count = 0;
- }
-}
-
-static struct iwl3945_frame *iwl3945_get_free_frame(struct iwl_priv *priv)
-{
- struct iwl3945_frame *frame;
- struct list_head *element;
- if (list_empty(&priv->free_frames)) {
- frame = kzalloc(sizeof(*frame), GFP_KERNEL);
- if (!frame) {
- IWL_ERR(priv, "Could not allocate frame!\n");
- return NULL;
- }
-
- priv->frames_count++;
- return frame;
- }
-
- element = priv->free_frames.next;
- list_del(element);
- return list_entry(element, struct iwl3945_frame, list);
-}
-
-static void iwl3945_free_frame(struct iwl_priv *priv, struct iwl3945_frame *frame)
-{
- memset(frame, 0, sizeof(*frame));
- list_add(&frame->list, &priv->free_frames);
-}
-
-unsigned int iwl3945_fill_beacon_frame(struct iwl_priv *priv,
- struct ieee80211_hdr *hdr,
- int left)
-{
-
- if (!iwl_is_associated(priv, IWL_RXON_CTX_BSS) || !priv->beacon_skb)
- return 0;
-
- if (priv->beacon_skb->len > left)
- return 0;
-
- memcpy(hdr, priv->beacon_skb->data, priv->beacon_skb->len);
-
- return priv->beacon_skb->len;
-}
-
-static int iwl3945_send_beacon_cmd(struct iwl_priv *priv)
-{
- struct iwl3945_frame *frame;
- unsigned int frame_size;
- int rc;
- u8 rate;
-
- frame = iwl3945_get_free_frame(priv);
-
- if (!frame) {
- IWL_ERR(priv, "Could not obtain free frame buffer for beacon "
- "command.\n");
- return -ENOMEM;
- }
-
- rate = iwl_rate_get_lowest_plcp(priv,
- &priv->contexts[IWL_RXON_CTX_BSS]);
-
- frame_size = iwl3945_hw_get_beacon_cmd(priv, frame, rate);
-
- rc = iwl_send_cmd_pdu(priv, REPLY_TX_BEACON, frame_size,
- &frame->u.cmd[0]);
-
- iwl3945_free_frame(priv, frame);
-
- return rc;
-}
-
-static void iwl3945_unset_hw_params(struct iwl_priv *priv)
-{
- if (priv->_3945.shared_virt)
- dma_free_coherent(&priv->pci_dev->dev,
- sizeof(struct iwl3945_shared),
- priv->_3945.shared_virt,
- priv->_3945.shared_phys);
-}
-
-static void iwl3945_build_tx_cmd_hwcrypto(struct iwl_priv *priv,
- struct ieee80211_tx_info *info,
- struct iwl_device_cmd *cmd,
- struct sk_buff *skb_frag,
- int sta_id)
-{
- struct iwl3945_tx_cmd *tx_cmd = (struct iwl3945_tx_cmd *)cmd->cmd.payload;
- struct iwl_hw_key *keyinfo = &priv->stations[sta_id].keyinfo;
-
- tx_cmd->sec_ctl = 0;
-
- switch (keyinfo->cipher) {
- case WLAN_CIPHER_SUITE_CCMP:
- tx_cmd->sec_ctl = TX_CMD_SEC_CCM;
- memcpy(tx_cmd->key, keyinfo->key, keyinfo->keylen);
- IWL_DEBUG_TX(priv, "tx_cmd with AES hwcrypto\n");
- break;
-
- case WLAN_CIPHER_SUITE_TKIP:
- break;
-
- case WLAN_CIPHER_SUITE_WEP104:
- tx_cmd->sec_ctl |= TX_CMD_SEC_KEY128;
- /* fall through */
- case WLAN_CIPHER_SUITE_WEP40:
- tx_cmd->sec_ctl |= TX_CMD_SEC_WEP |
- (info->control.hw_key->hw_key_idx & TX_CMD_SEC_MSK) << TX_CMD_SEC_SHIFT;
-
- memcpy(&tx_cmd->key[3], keyinfo->key, keyinfo->keylen);
-
- IWL_DEBUG_TX(priv, "Configuring packet for WEP encryption "
- "with key %d\n", info->control.hw_key->hw_key_idx);
- break;
-
- default:
- IWL_ERR(priv, "Unknown encode cipher %x\n", keyinfo->cipher);
- break;
- }
-}
-
-/*
- * handle build REPLY_TX command notification.
- */
-static void iwl3945_build_tx_cmd_basic(struct iwl_priv *priv,
- struct iwl_device_cmd *cmd,
- struct ieee80211_tx_info *info,
- struct ieee80211_hdr *hdr, u8 std_id)
-{
- struct iwl3945_tx_cmd *tx_cmd = (struct iwl3945_tx_cmd *)cmd->cmd.payload;
- __le32 tx_flags = tx_cmd->tx_flags;
- __le16 fc = hdr->frame_control;
-
- tx_cmd->stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
- if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) {
- tx_flags |= TX_CMD_FLG_ACK_MSK;
- if (ieee80211_is_mgmt(fc))
- tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
- if (ieee80211_is_probe_resp(fc) &&
- !(le16_to_cpu(hdr->seq_ctrl) & 0xf))
- tx_flags |= TX_CMD_FLG_TSF_MSK;
- } else {
- tx_flags &= (~TX_CMD_FLG_ACK_MSK);
- tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
- }
-
- tx_cmd->sta_id = std_id;
- if (ieee80211_has_morefrags(fc))
- tx_flags |= TX_CMD_FLG_MORE_FRAG_MSK;
-
- if (ieee80211_is_data_qos(fc)) {
- u8 *qc = ieee80211_get_qos_ctl(hdr);
- tx_cmd->tid_tspec = qc[0] & 0xf;
- tx_flags &= ~TX_CMD_FLG_SEQ_CTL_MSK;
- } else {
- tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
- }
-
- priv->cfg->ops->utils->tx_cmd_protection(priv, info, fc, &tx_flags);
-
- tx_flags &= ~(TX_CMD_FLG_ANT_SEL_MSK);
- if (ieee80211_is_mgmt(fc)) {
- if (ieee80211_is_assoc_req(fc) || ieee80211_is_reassoc_req(fc))
- tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(3);
- else
- tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(2);
- } else {
- tx_cmd->timeout.pm_frame_timeout = 0;
- }
-
- tx_cmd->driver_txop = 0;
- tx_cmd->tx_flags = tx_flags;
- tx_cmd->next_frame_len = 0;
-}
-
-/*
- * start REPLY_TX command process
- */
-static int iwl3945_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
-{
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
- struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
- struct iwl3945_tx_cmd *tx_cmd;
- struct iwl_tx_queue *txq = NULL;
- struct iwl_queue *q = NULL;
- struct iwl_device_cmd *out_cmd;
- struct iwl_cmd_meta *out_meta;
- dma_addr_t phys_addr;
- dma_addr_t txcmd_phys;
- int txq_id = skb_get_queue_mapping(skb);
- u16 len, idx, hdr_len;
- u8 id;
- u8 unicast;
- u8 sta_id;
- u8 tid = 0;
- __le16 fc;
- u8 wait_write_ptr = 0;
- unsigned long flags;
-
- spin_lock_irqsave(&priv->lock, flags);
- if (iwl_is_rfkill(priv)) {
- IWL_DEBUG_DROP(priv, "Dropping - RF KILL\n");
- goto drop_unlock;
- }
-
- if ((ieee80211_get_tx_rate(priv->hw, info)->hw_value & 0xFF) == IWL_INVALID_RATE) {
- IWL_ERR(priv, "ERROR: No TX rate available.\n");
- goto drop_unlock;
- }
-
- unicast = !is_multicast_ether_addr(hdr->addr1);
- id = 0;
-
- fc = hdr->frame_control;
-
-#ifdef CONFIG_IWLWIFI_DEBUG
- if (ieee80211_is_auth(fc))
- IWL_DEBUG_TX(priv, "Sending AUTH frame\n");
- else if (ieee80211_is_assoc_req(fc))
- IWL_DEBUG_TX(priv, "Sending ASSOC frame\n");
- else if (ieee80211_is_reassoc_req(fc))
- IWL_DEBUG_TX(priv, "Sending REASSOC frame\n");
-#endif
-
- spin_unlock_irqrestore(&priv->lock, flags);
-
- hdr_len = ieee80211_hdrlen(fc);
-
- /* Find index into station table for destination station */
- sta_id = iwl_sta_id_or_broadcast(
- priv, &priv->contexts[IWL_RXON_CTX_BSS],
- info->control.sta);
- if (sta_id == IWL_INVALID_STATION) {
- IWL_DEBUG_DROP(priv, "Dropping - INVALID STATION: %pM\n",
- hdr->addr1);
- goto drop;
- }
-
- IWL_DEBUG_RATE(priv, "station Id %d\n", sta_id);
-
- if (ieee80211_is_data_qos(fc)) {
- u8 *qc = ieee80211_get_qos_ctl(hdr);
- tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
- if (unlikely(tid >= MAX_TID_COUNT))
- goto drop;
- }
-
- /* Descriptor for chosen Tx queue */
- txq = &priv->txq[txq_id];
- q = &txq->q;
-
- if ((iwl_queue_space(q) < q->high_mark))
- goto drop;
-
- spin_lock_irqsave(&priv->lock, flags);
-
- idx = get_cmd_index(q, q->write_ptr, 0);
-
- /* Set up driver data for this TFD */
- memset(&(txq->txb[q->write_ptr]), 0, sizeof(struct iwl_tx_info));
- txq->txb[q->write_ptr].skb = skb;
- txq->txb[q->write_ptr].ctx = &priv->contexts[IWL_RXON_CTX_BSS];
-
- /* Init first empty entry in queue's array of Tx/cmd buffers */
- out_cmd = txq->cmd[idx];
- out_meta = &txq->meta[idx];
- tx_cmd = (struct iwl3945_tx_cmd *)out_cmd->cmd.payload;
- memset(&out_cmd->hdr, 0, sizeof(out_cmd->hdr));
- memset(tx_cmd, 0, sizeof(*tx_cmd));
-
- /*
- * Set up the Tx-command (not MAC!) header.
- * Store the chosen Tx queue and TFD index within the sequence field;
- * after Tx, uCode's Tx response will return this value so driver can
- * locate the frame within the tx queue and do post-tx processing.
- */
- out_cmd->hdr.cmd = REPLY_TX;
- out_cmd->hdr.sequence = cpu_to_le16((u16)(QUEUE_TO_SEQ(txq_id) |
- INDEX_TO_SEQ(q->write_ptr)));
-
- /* Copy MAC header from skb into command buffer */
- memcpy(tx_cmd->hdr, hdr, hdr_len);
-
-
- if (info->control.hw_key)
- iwl3945_build_tx_cmd_hwcrypto(priv, info, out_cmd, skb, sta_id);
-
- /* TODO need this for burst mode later on */
- iwl3945_build_tx_cmd_basic(priv, out_cmd, info, hdr, sta_id);
-
- /* set is_hcca to 0; it probably will never be implemented */
- iwl3945_hw_build_tx_cmd_rate(priv, out_cmd, info, hdr, sta_id, 0);
-
- /* Total # bytes to be transmitted */
- len = (u16)skb->len;
- tx_cmd->len = cpu_to_le16(len);
-
- iwl_dbg_log_tx_data_frame(priv, len, hdr);
- iwl_update_stats(priv, true, fc, len);
- tx_cmd->tx_flags &= ~TX_CMD_FLG_ANT_A_MSK;
- tx_cmd->tx_flags &= ~TX_CMD_FLG_ANT_B_MSK;
-
- if (!ieee80211_has_morefrags(hdr->frame_control)) {
- txq->need_update = 1;
- } else {
- wait_write_ptr = 1;
- txq->need_update = 0;
- }
-
- IWL_DEBUG_TX(priv, "sequence nr = 0X%x\n",
- le16_to_cpu(out_cmd->hdr.sequence));
- IWL_DEBUG_TX(priv, "tx_flags = 0X%x\n", le32_to_cpu(tx_cmd->tx_flags));
- iwl_print_hex_dump(priv, IWL_DL_TX, tx_cmd, sizeof(*tx_cmd));
- iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx_cmd->hdr,
- ieee80211_hdrlen(fc));
-
- /*
- * Use the first empty entry in this queue's command buffer array
- * to contain the Tx command and MAC header concatenated together
- * (payload data will be in another buffer).
- * Size of this varies, due to varying MAC header length.
- * If end is not dword aligned, we'll have 2 extra bytes at the end
- * of the MAC header (device reads on dword boundaries).
- * We'll tell device about this padding later.
- */
- len = sizeof(struct iwl3945_tx_cmd) +
- sizeof(struct iwl_cmd_header) + hdr_len;
- len = (len + 3) & ~3;
-
- /* Physical address of this Tx command's header (not MAC header!),
- * within command buffer array. */
- txcmd_phys = pci_map_single(priv->pci_dev, &out_cmd->hdr,
- len, PCI_DMA_TODEVICE);
- /* we do not map meta data ... so we can safely access address to
- * provide to unmap command*/
- dma_unmap_addr_set(out_meta, mapping, txcmd_phys);
- dma_unmap_len_set(out_meta, len, len);
-
- /* Add buffer containing Tx command and MAC(!) header to TFD's
- * first entry */
- priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq,
- txcmd_phys, len, 1, 0);
-
-
- /* Set up TFD's 2nd entry to point directly to remainder of skb,
- * if any (802.11 null frames have no payload). */
- len = skb->len - hdr_len;
- if (len) {
- phys_addr = pci_map_single(priv->pci_dev, skb->data + hdr_len,
- len, PCI_DMA_TODEVICE);
- priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq,
- phys_addr, len,
- 0, U32_PAD(len));
- }
-
-
- /* Tell device the write index *just past* this latest filled TFD */
- q->write_ptr = iwl_queue_inc_wrap(q->write_ptr, q->n_bd);
- iwl_txq_update_write_ptr(priv, txq);
- spin_unlock_irqrestore(&priv->lock, flags);
-
- if ((iwl_queue_space(q) < q->high_mark)
- && priv->mac80211_registered) {
- if (wait_write_ptr) {
- spin_lock_irqsave(&priv->lock, flags);
- txq->need_update = 1;
- iwl_txq_update_write_ptr(priv, txq);
- spin_unlock_irqrestore(&priv->lock, flags);
- }
-
- iwl_stop_queue(priv, txq);
- }
-
- return 0;
-
-drop_unlock:
- spin_unlock_irqrestore(&priv->lock, flags);
-drop:
- return -1;
-}
-
-static int iwl3945_get_measurement(struct iwl_priv *priv,
- struct ieee80211_measurement_params *params,
- u8 type)
-{
- struct iwl_spectrum_cmd spectrum;
- struct iwl_rx_packet *pkt;
- struct iwl_host_cmd cmd = {
- .id = REPLY_SPECTRUM_MEASUREMENT_CMD,
- .data = (void *)&spectrum,
- .flags = CMD_WANT_SKB,
- };
- u32 add_time = le64_to_cpu(params->start_time);
- int rc;
- int spectrum_resp_status;
- int duration = le16_to_cpu(params->duration);
- struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
-
- if (iwl_is_associated(priv, IWL_RXON_CTX_BSS))
- add_time = iwl_usecs_to_beacons(priv,
- le64_to_cpu(params->start_time) - priv->_3945.last_tsf,
- le16_to_cpu(ctx->timing.beacon_interval));
-
- memset(&spectrum, 0, sizeof(spectrum));
-
- spectrum.channel_count = cpu_to_le16(1);
- spectrum.flags =
- RXON_FLG_TSF2HOST_MSK | RXON_FLG_ANT_A_MSK | RXON_FLG_DIS_DIV_MSK;
- spectrum.filter_flags = MEASUREMENT_FILTER_FLAG;
- cmd.len = sizeof(spectrum);
- spectrum.len = cpu_to_le16(cmd.len - sizeof(spectrum.len));
-
- if (iwl_is_associated(priv, IWL_RXON_CTX_BSS))
- spectrum.start_time =
- iwl_add_beacon_time(priv,
- priv->_3945.last_beacon_time, add_time,
- le16_to_cpu(ctx->timing.beacon_interval));
- else
- spectrum.start_time = 0;
-
- spectrum.channels[0].duration = cpu_to_le32(duration * TIME_UNIT);
- spectrum.channels[0].channel = params->channel;
- spectrum.channels[0].type = type;
- if (ctx->active.flags & RXON_FLG_BAND_24G_MSK)
- spectrum.flags |= RXON_FLG_BAND_24G_MSK |
- RXON_FLG_AUTO_DETECT_MSK | RXON_FLG_TGG_PROTECT_MSK;
-
- rc = iwl_send_cmd_sync(priv, &cmd);
- if (rc)
- return rc;
-
- pkt = (struct iwl_rx_packet *)cmd.reply_page;
- if (pkt->hdr.flags & IWL_CMD_FAILED_MSK) {
- IWL_ERR(priv, "Bad return from REPLY_RX_ON_ASSOC command\n");
- rc = -EIO;
- }
-
- spectrum_resp_status = le16_to_cpu(pkt->u.spectrum.status);
- switch (spectrum_resp_status) {
- case 0: /* Command will be handled */
- if (pkt->u.spectrum.id != 0xff) {
- IWL_DEBUG_INFO(priv, "Replaced existing measurement: %d\n",
- pkt->u.spectrum.id);
- priv->measurement_status &= ~MEASUREMENT_READY;
- }
- priv->measurement_status |= MEASUREMENT_ACTIVE;
- rc = 0;
- break;
-
- case 1: /* Command will not be handled */
- rc = -EAGAIN;
- break;
- }
-
- iwl_free_pages(priv, cmd.reply_page);
-
- return rc;
-}
-
-static void iwl3945_rx_reply_alive(struct iwl_priv *priv,
- struct iwl_rx_mem_buffer *rxb)
-{
- struct iwl_rx_packet *pkt = rxb_addr(rxb);
- struct iwl_alive_resp *palive;
- struct delayed_work *pwork;
-
- palive = &pkt->u.alive_frame;
-
- IWL_DEBUG_INFO(priv, "Alive ucode status 0x%08X revision "
- "0x%01X 0x%01X\n",
- palive->is_valid, palive->ver_type,
- palive->ver_subtype);
-
- if (palive->ver_subtype == INITIALIZE_SUBTYPE) {
- IWL_DEBUG_INFO(priv, "Initialization Alive received.\n");
- memcpy(&priv->card_alive_init, &pkt->u.alive_frame,
- sizeof(struct iwl_alive_resp));
- pwork = &priv->init_alive_start;
- } else {
- IWL_DEBUG_INFO(priv, "Runtime Alive received.\n");
- memcpy(&priv->card_alive, &pkt->u.alive_frame,
- sizeof(struct iwl_alive_resp));
- pwork = &priv->alive_start;
- iwl3945_disable_events(priv);
- }
-
- /* We delay the ALIVE response by 5ms to
- * give the HW RF Kill time to activate... */
- if (palive->is_valid == UCODE_VALID_OK)
- queue_delayed_work(priv->workqueue, pwork,
- msecs_to_jiffies(5));
- else
- IWL_WARN(priv, "uCode did not respond OK.\n");
-}
-
-static void iwl3945_rx_reply_add_sta(struct iwl_priv *priv,
- struct iwl_rx_mem_buffer *rxb)
-{
-#ifdef CONFIG_IWLWIFI_DEBUG
- struct iwl_rx_packet *pkt = rxb_addr(rxb);
-#endif
-
- IWL_DEBUG_RX(priv, "Received REPLY_ADD_STA: 0x%02X\n", pkt->u.status);
-}
-
-static void iwl3945_bg_beacon_update(struct work_struct *work)
-{
- struct iwl_priv *priv =
- container_of(work, struct iwl_priv, beacon_update);
- struct sk_buff *beacon;
-
- /* Pull updated AP beacon from mac80211. will fail if not in AP mode */
- beacon = ieee80211_beacon_get(priv->hw,
- priv->contexts[IWL_RXON_CTX_BSS].vif);
-
- if (!beacon) {
- IWL_ERR(priv, "update beacon failed\n");
- return;
- }
-
- mutex_lock(&priv->mutex);
- /* new beacon skb is allocated every time; dispose previous.*/
- if (priv->beacon_skb)
- dev_kfree_skb(priv->beacon_skb);
-
- priv->beacon_skb = beacon;
- mutex_unlock(&priv->mutex);
-
- iwl3945_send_beacon_cmd(priv);
-}
-
-static void iwl3945_rx_beacon_notif(struct iwl_priv *priv,
- struct iwl_rx_mem_buffer *rxb)
-{
- struct iwl_rx_packet *pkt = rxb_addr(rxb);
- struct iwl3945_beacon_notif *beacon = &(pkt->u.beacon_status);
-#ifdef CONFIG_IWLWIFI_DEBUG
- u8 rate = beacon->beacon_notify_hdr.rate;
-
- IWL_DEBUG_RX(priv, "beacon status %x retries %d iss %d "
- "tsf %d %d rate %d\n",
- le32_to_cpu(beacon->beacon_notify_hdr.status) & TX_STATUS_MSK,
- beacon->beacon_notify_hdr.failure_frame,
- le32_to_cpu(beacon->ibss_mgr_status),
- le32_to_cpu(beacon->high_tsf),
- le32_to_cpu(beacon->low_tsf), rate);
-#endif
-
- priv->ibss_manager = le32_to_cpu(beacon->ibss_mgr_status);
-
- if ((priv->iw_mode == NL80211_IFTYPE_AP) &&
- (!test_bit(STATUS_EXIT_PENDING, &priv->status)))
- queue_work(priv->workqueue, &priv->beacon_update);
-}
-
-/* Handle notification from uCode that card's power state is changing
- * due to software, hardware, or critical temperature RFKILL */
-static void iwl3945_rx_card_state_notif(struct iwl_priv *priv,
- struct iwl_rx_mem_buffer *rxb)
-{
- struct iwl_rx_packet *pkt = rxb_addr(rxb);
- u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags);
- unsigned long status = priv->status;
-
- IWL_WARN(priv, "Card state received: HW:%s SW:%s\n",
- (flags & HW_CARD_DISABLED) ? "Kill" : "On",
- (flags & SW_CARD_DISABLED) ? "Kill" : "On");
-
- iwl_write32(priv, CSR_UCODE_DRV_GP1_SET,
- CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
-
- if (flags & HW_CARD_DISABLED)
- set_bit(STATUS_RF_KILL_HW, &priv->status);
- else
- clear_bit(STATUS_RF_KILL_HW, &priv->status);
-
-
- iwl_scan_cancel(priv);
-
- if ((test_bit(STATUS_RF_KILL_HW, &status) !=
- test_bit(STATUS_RF_KILL_HW, &priv->status)))
- wiphy_rfkill_set_hw_state(priv->hw->wiphy,
- test_bit(STATUS_RF_KILL_HW, &priv->status));
- else
- wake_up_interruptible(&priv->wait_command_queue);
-}
-
-/**
- * iwl3945_setup_rx_handlers - Initialize Rx handler callbacks
- *
- * Setup the RX handlers for each of the reply types sent from the uCode
- * to the host.
- *
- * This function chains into the hardware specific files for them to setup
- * any hardware specific handlers as well.
- */
-static void iwl3945_setup_rx_handlers(struct iwl_priv *priv)
-{
- priv->rx_handlers[REPLY_ALIVE] = iwl3945_rx_reply_alive;
- priv->rx_handlers[REPLY_ADD_STA] = iwl3945_rx_reply_add_sta;
- priv->rx_handlers[REPLY_ERROR] = iwl_rx_reply_error;
- priv->rx_handlers[CHANNEL_SWITCH_NOTIFICATION] = iwl_rx_csa;
- priv->rx_handlers[SPECTRUM_MEASURE_NOTIFICATION] =
- iwl_rx_spectrum_measure_notif;
- priv->rx_handlers[PM_SLEEP_NOTIFICATION] = iwl_rx_pm_sleep_notif;
- priv->rx_handlers[PM_DEBUG_STATISTIC_NOTIFIC] =
- iwl_rx_pm_debug_statistics_notif;
- priv->rx_handlers[BEACON_NOTIFICATION] = iwl3945_rx_beacon_notif;
-
- /*
- * The same handler is used for both the REPLY to a discrete
- * statistics request from the host as well as for the periodic
- * statistics notifications (after received beacons) from the uCode.
- */
- priv->rx_handlers[REPLY_STATISTICS_CMD] = iwl3945_reply_statistics;
- priv->rx_handlers[STATISTICS_NOTIFICATION] = iwl3945_hw_rx_statistics;
-
- iwl_setup_rx_scan_handlers(priv);
- priv->rx_handlers[CARD_STATE_NOTIFICATION] = iwl3945_rx_card_state_notif;
-
- /* Set up hardware specific Rx handlers */
- iwl3945_hw_rx_handler_setup(priv);
-}
-
-/************************** RX-FUNCTIONS ****************************/
-/*
- * Rx theory of operation
- *
- * The host allocates 32 DMA target addresses and passes the host address
- * to the firmware at register IWL_RFDS_TABLE_LOWER + N * RFD_SIZE where N is
- * 0 to 31
- *
- * Rx Queue Indexes
- * The host/firmware share two index registers for managing the Rx buffers.
- *
- * The READ index maps to the first position that the firmware may be writing
- * to -- the driver can read up to (but not including) this position and get
- * good data.
- * The READ index is managed by the firmware once the card is enabled.
- *
- * The WRITE index maps to the last position the driver has read from -- the
- * position preceding WRITE is the last slot the firmware can place a packet.
- *
- * The queue is empty (no good data) if WRITE = READ - 1, and is full if
- * WRITE = READ.
- *
- * During initialization, the host sets up the READ queue position to the first
- * INDEX position, and WRITE to the last (READ - 1 wrapped)
- *
- * When the firmware places a packet in a buffer, it will advance the READ index
- * and fire the RX interrupt. The driver can then query the READ index and
- * process as many packets as possible, moving the WRITE index forward as it
- * resets the Rx queue buffers with new memory.
- *
- * The management in the driver is as follows:
- * + A list of pre-allocated SKBs is stored in iwl->rxq->rx_free. When
- * iwl->rxq->free_count drops to or below RX_LOW_WATERMARK, work is scheduled
- * to replenish the iwl->rxq->rx_free.
- * + In iwl3945_rx_replenish (scheduled) if 'processed' != 'read' then the
- * iwl->rxq is replenished and the READ INDEX is updated (updating the
- * 'processed' and 'read' driver indexes as well)
- * + A received packet is processed and handed to the kernel network stack,
- * detached from the iwl->rxq. The driver 'processed' index is updated.
- * + The Host/Firmware iwl->rxq is replenished at tasklet time from the rx_free
- * list. If there are no allocated buffers in iwl->rxq->rx_free, the READ
- * INDEX is not incremented and iwl->status(RX_STALLED) is set. If there
- * were enough free buffers and RX_STALLED is set it is cleared.
- *
- *
- * Driver sequence:
- *
- * iwl3945_rx_replenish() Replenishes rx_free list from rx_used, and calls
- * iwl3945_rx_queue_restock
- * iwl3945_rx_queue_restock() Moves available buffers from rx_free into Rx
- * queue, updates firmware pointers, and updates
- * the WRITE index. If insufficient rx_free buffers
- * are available, schedules iwl3945_rx_replenish
- *
- * -- enable interrupts --
- * ISR - iwl3945_rx() Detach iwl_rx_mem_buffers from pool up to the
- * READ INDEX, detaching the SKB from the pool.
- * Moves the packet buffer from queue to rx_used.
- * Calls iwl3945_rx_queue_restock to refill any empty
- * slots.
- * ...
- *
- */
-
-/**
- * iwl3945_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr
- */
-static inline __le32 iwl3945_dma_addr2rbd_ptr(struct iwl_priv *priv,
- dma_addr_t dma_addr)
-{
- return cpu_to_le32((u32)dma_addr);
-}
-
-/**
- * iwl3945_rx_queue_restock - refill RX queue from pre-allocated pool
- *
- * If there are slots in the RX queue that need to be restocked,
- * and we have free pre-allocated buffers, fill the ranks as much
- * as we can, pulling from rx_free.
- *
- * This moves the 'write' index forward to catch up with 'processed', and
- * also updates the memory address in the firmware to reference the new
- * target buffer.
- */
-static void iwl3945_rx_queue_restock(struct iwl_priv *priv)
-{
- struct iwl_rx_queue *rxq = &priv->rxq;
- struct list_head *element;
- struct iwl_rx_mem_buffer *rxb;
- unsigned long flags;
- int write;
-
- spin_lock_irqsave(&rxq->lock, flags);
- write = rxq->write & ~0x7;
- while ((iwl_rx_queue_space(rxq) > 0) && (rxq->free_count)) {
- /* Get next free Rx buffer, remove from free list */
- element = rxq->rx_free.next;
- rxb = list_entry(element, struct iwl_rx_mem_buffer, list);
- list_del(element);
-
- /* Point to Rx buffer via next RBD in circular buffer */
- rxq->bd[rxq->write] = iwl3945_dma_addr2rbd_ptr(priv, rxb->page_dma);
- rxq->queue[rxq->write] = rxb;
- rxq->write = (rxq->write + 1) & RX_QUEUE_MASK;
- rxq->free_count--;
- }
- spin_unlock_irqrestore(&rxq->lock, flags);
- /* If the pre-allocated buffer pool is dropping low, schedule to
- * refill it */
- if (rxq->free_count <= RX_LOW_WATERMARK)
- queue_work(priv->workqueue, &priv->rx_replenish);
-
-
- /* If we've added more space for the firmware to place data, tell it.
- * Increment device's write pointer in multiples of 8. */
- if ((rxq->write_actual != (rxq->write & ~0x7))
- || (abs(rxq->write - rxq->read) > 7)) {
- spin_lock_irqsave(&rxq->lock, flags);
- rxq->need_update = 1;
- spin_unlock_irqrestore(&rxq->lock, flags);
- iwl_rx_queue_update_write_ptr(priv, rxq);
- }
-}
-
-/**
- * iwl3945_rx_replenish - Move all used packet from rx_used to rx_free
- *
- * When moving to rx_free an SKB is allocated for the slot.
- *
- * Also restock the Rx queue via iwl3945_rx_queue_restock.
- * This is called as a scheduled work item (except for during initialization)
- */
-static void iwl3945_rx_allocate(struct iwl_priv *priv, gfp_t priority)
-{
- struct iwl_rx_queue *rxq = &priv->rxq;
- struct list_head *element;
- struct iwl_rx_mem_buffer *rxb;
- struct page *page;
- unsigned long flags;
- gfp_t gfp_mask = priority;
-
- while (1) {
- spin_lock_irqsave(&rxq->lock, flags);
-
- if (list_empty(&rxq->rx_used)) {
- spin_unlock_irqrestore(&rxq->lock, flags);
- return;
- }
- spin_unlock_irqrestore(&rxq->lock, flags);
-
- if (rxq->free_count > RX_LOW_WATERMARK)
- gfp_mask |= __GFP_NOWARN;
-
- if (priv->hw_params.rx_page_order > 0)
- gfp_mask |= __GFP_COMP;
-
- /* Alloc a new receive buffer */
- page = alloc_pages(gfp_mask, priv->hw_params.rx_page_order);
- if (!page) {
- if (net_ratelimit())
- IWL_DEBUG_INFO(priv, "Failed to allocate SKB buffer.\n");
- if ((rxq->free_count <= RX_LOW_WATERMARK) &&
- net_ratelimit())
- IWL_CRIT(priv, "Failed to allocate SKB buffer with %s. Only %u free buffers remaining.\n",
- priority == GFP_ATOMIC ? "GFP_ATOMIC" : "GFP_KERNEL",
- rxq->free_count);
- /* We don't reschedule replenish work here -- we will
- * call the restock method and if it still needs
- * more buffers it will schedule replenish */
- break;
- }
-
- spin_lock_irqsave(&rxq->lock, flags);
- if (list_empty(&rxq->rx_used)) {
- spin_unlock_irqrestore(&rxq->lock, flags);
- __free_pages(page, priv->hw_params.rx_page_order);
- return;
- }
- element = rxq->rx_used.next;
- rxb = list_entry(element, struct iwl_rx_mem_buffer, list);
- list_del(element);
- spin_unlock_irqrestore(&rxq->lock, flags);
-
- rxb->page = page;
- /* Get physical address of RB/SKB */
- rxb->page_dma = pci_map_page(priv->pci_dev, page, 0,
- PAGE_SIZE << priv->hw_params.rx_page_order,
- PCI_DMA_FROMDEVICE);
-
- spin_lock_irqsave(&rxq->lock, flags);
-
- list_add_tail(&rxb->list, &rxq->rx_free);
- rxq->free_count++;
- priv->alloc_rxb_page++;
-
- spin_unlock_irqrestore(&rxq->lock, flags);
- }
-}
-
-void iwl3945_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
-{
- unsigned long flags;
- int i;
- spin_lock_irqsave(&rxq->lock, flags);
- INIT_LIST_HEAD(&rxq->rx_free);
- INIT_LIST_HEAD(&rxq->rx_used);
- /* Fill the rx_used queue with _all_ of the Rx buffers */
- for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) {
- /* In the reset function, these buffers may have been allocated
- * to an SKB, so we need to unmap and free potential storage */
- if (rxq->pool[i].page != NULL) {
- pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma,
- PAGE_SIZE << priv->hw_params.rx_page_order,
- PCI_DMA_FROMDEVICE);
- __iwl_free_pages(priv, rxq->pool[i].page);
- rxq->pool[i].page = NULL;
- }
- list_add_tail(&rxq->pool[i].list, &rxq->rx_used);
- }
-
- /* Set us so that we have processed and used all buffers, but have
- * not restocked the Rx queue with fresh buffers */
- rxq->read = rxq->write = 0;
- rxq->write_actual = 0;
- rxq->free_count = 0;
- spin_unlock_irqrestore(&rxq->lock, flags);
-}
-
-void iwl3945_rx_replenish(void *data)
-{
- struct iwl_priv *priv = data;
- unsigned long flags;
-
- iwl3945_rx_allocate(priv, GFP_KERNEL);
-
- spin_lock_irqsave(&priv->lock, flags);
- iwl3945_rx_queue_restock(priv);
- spin_unlock_irqrestore(&priv->lock, flags);
-}
-
-static void iwl3945_rx_replenish_now(struct iwl_priv *priv)
-{
- iwl3945_rx_allocate(priv, GFP_ATOMIC);
-
- iwl3945_rx_queue_restock(priv);
-}
-
-
-/* Assumes that the skb field of the buffers in 'pool' is kept accurate.
- * If an SKB has been detached, the POOL needs to have its SKB set to NULL
- * This free routine walks the list of POOL entries and if SKB is set to
- * non NULL it is unmapped and freed
- */
-static void iwl3945_rx_queue_free(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
-{
- int i;
- for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) {
- if (rxq->pool[i].page != NULL) {
- pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma,
- PAGE_SIZE << priv->hw_params.rx_page_order,
- PCI_DMA_FROMDEVICE);
- __iwl_free_pages(priv, rxq->pool[i].page);
- rxq->pool[i].page = NULL;
- }
- }
-
- dma_free_coherent(&priv->pci_dev->dev, 4 * RX_QUEUE_SIZE, rxq->bd,
- rxq->bd_dma);
- dma_free_coherent(&priv->pci_dev->dev, sizeof(struct iwl_rb_status),
- rxq->rb_stts, rxq->rb_stts_dma);
- rxq->bd = NULL;
- rxq->rb_stts = NULL;
-}
-
-
-/* Convert linear signal-to-noise ratio into dB */
-static u8 ratio2dB[100] = {
-/* 0 1 2 3 4 5 6 7 8 9 */
- 0, 0, 6, 10, 12, 14, 16, 17, 18, 19, /* 00 - 09 */
- 20, 21, 22, 22, 23, 23, 24, 25, 26, 26, /* 10 - 19 */
- 26, 26, 26, 27, 27, 28, 28, 28, 29, 29, /* 20 - 29 */
- 29, 30, 30, 30, 31, 31, 31, 31, 32, 32, /* 30 - 39 */
- 32, 32, 32, 33, 33, 33, 33, 33, 34, 34, /* 40 - 49 */
- 34, 34, 34, 34, 35, 35, 35, 35, 35, 35, /* 50 - 59 */
- 36, 36, 36, 36, 36, 36, 36, 37, 37, 37, /* 60 - 69 */
- 37, 37, 37, 37, 37, 38, 38, 38, 38, 38, /* 70 - 79 */
- 38, 38, 38, 38, 38, 39, 39, 39, 39, 39, /* 80 - 89 */
- 39, 39, 39, 39, 39, 40, 40, 40, 40, 40 /* 90 - 99 */
-};
-
-/* Calculates a relative dB value from a ratio of linear
- * (i.e. not dB) signal levels.
- * Conversion assumes that levels are voltages (20*log), not powers (10*log). */
-int iwl3945_calc_db_from_ratio(int sig_ratio)
-{
- /* 1000:1 or higher just report as 60 dB */
- if (sig_ratio >= 1000)
- return 60;
-
- /* 100:1 or higher, divide by 10 and use table,
- * add 20 dB to make up for divide by 10 */
- if (sig_ratio >= 100)
- return 20 + (int)ratio2dB[sig_ratio/10];
-
- /* We shouldn't see this */
- if (sig_ratio < 1)
- return 0;
-
- /* Use table for ratios 1:1 - 99:1 */
- return (int)ratio2dB[sig_ratio];
-}
-
-/**
- * iwl3945_rx_handle - Main entry function for receiving responses from uCode
- *
- * Uses the priv->rx_handlers callback function array to invoke
- * the appropriate handlers, including command responses,
- * frame-received notifications, and other notifications.
- */
-static void iwl3945_rx_handle(struct iwl_priv *priv)
-{
- struct iwl_rx_mem_buffer *rxb;
- struct iwl_rx_packet *pkt;
- struct iwl_rx_queue *rxq = &priv->rxq;
- u32 r, i;
- int reclaim;
- unsigned long flags;
- u8 fill_rx = 0;
- u32 count = 8;
- int total_empty = 0;
-
- /* uCode's read index (stored in shared DRAM) indicates the last Rx
- * buffer that the driver may process (last buffer filled by ucode). */
- r = le16_to_cpu(rxq->rb_stts->closed_rb_num) & 0x0FFF;
- i = rxq->read;
-
- /* calculate total frames need to be restock after handling RX */
- total_empty = r - rxq->write_actual;
- if (total_empty < 0)
- total_empty += RX_QUEUE_SIZE;
-
- if (total_empty > (RX_QUEUE_SIZE / 2))
- fill_rx = 1;
- /* Rx interrupt, but nothing sent from uCode */
- if (i == r)
- IWL_DEBUG_RX(priv, "r = %d, i = %d\n", r, i);
-
- while (i != r) {
- int len;
-
- rxb = rxq->queue[i];
-
- /* If an RXB doesn't have a Rx queue slot associated with it,
- * then a bug has been introduced in the queue refilling
- * routines -- catch it here */
- BUG_ON(rxb == NULL);
-
- rxq->queue[i] = NULL;
-
- pci_unmap_page(priv->pci_dev, rxb->page_dma,
- PAGE_SIZE << priv->hw_params.rx_page_order,
- PCI_DMA_FROMDEVICE);
- pkt = rxb_addr(rxb);
-
- len = le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK;
- len += sizeof(u32); /* account for status word */
- trace_iwlwifi_dev_rx(priv, pkt, len);
-
- /* Reclaim a command buffer only if this packet is a response
- * to a (driver-originated) command.
- * If the packet (e.g. Rx frame) originated from uCode,
- * there is no command buffer to reclaim.
- * Ucode should set SEQ_RX_FRAME bit if ucode-originated,
- * but apparently a few don't get set; catch them here. */
- reclaim = !(pkt->hdr.sequence & SEQ_RX_FRAME) &&
- (pkt->hdr.cmd != STATISTICS_NOTIFICATION) &&
- (pkt->hdr.cmd != REPLY_TX);
-
- /* Based on type of command response or notification,
- * handle those that need handling via function in
- * rx_handlers table. See iwl3945_setup_rx_handlers() */
- if (priv->rx_handlers[pkt->hdr.cmd]) {
- IWL_DEBUG_RX(priv, "r = %d, i = %d, %s, 0x%02x\n", r, i,
- get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
- priv->isr_stats.rx_handlers[pkt->hdr.cmd]++;
- priv->rx_handlers[pkt->hdr.cmd] (priv, rxb);
- } else {
- /* No handling needed */
- IWL_DEBUG_RX(priv,
- "r %d i %d No handler needed for %s, 0x%02x\n",
- r, i, get_cmd_string(pkt->hdr.cmd),
- pkt->hdr.cmd);
- }
-
- /*
- * XXX: After here, we should always check rxb->page
- * against NULL before touching it or its virtual
- * memory (pkt). Because some rx_handler might have
- * already taken or freed the pages.
- */
-
- if (reclaim) {
- /* Invoke any callbacks, transfer the buffer to caller,
- * and fire off the (possibly) blocking iwl_send_cmd()
- * as we reclaim the driver command queue */
- if (rxb->page)
- iwl_tx_cmd_complete(priv, rxb);
- else
- IWL_WARN(priv, "Claim null rxb?\n");
- }
-
- /* Reuse the page if possible. For notification packets and
- * SKBs that fail to Rx correctly, add them back into the
- * rx_free list for reuse later. */
- spin_lock_irqsave(&rxq->lock, flags);
- if (rxb->page != NULL) {
- rxb->page_dma = pci_map_page(priv->pci_dev, rxb->page,
- 0, PAGE_SIZE << priv->hw_params.rx_page_order,
- PCI_DMA_FROMDEVICE);
- list_add_tail(&rxb->list, &rxq->rx_free);
- rxq->free_count++;
- } else
- list_add_tail(&rxb->list, &rxq->rx_used);
-
- spin_unlock_irqrestore(&rxq->lock, flags);
-
- i = (i + 1) & RX_QUEUE_MASK;
- /* If there are a lot of unused frames,
- * restock the Rx queue so ucode won't assert. */
- if (fill_rx) {
- count++;
- if (count >= 8) {
- rxq->read = i;
- iwl3945_rx_replenish_now(priv);
- count = 0;
- }
- }
- }
-
- /* Backtrack one entry */
- rxq->read = i;
- if (fill_rx)
- iwl3945_rx_replenish_now(priv);
- else
- iwl3945_rx_queue_restock(priv);
-}
-
-/* call this function to flush any scheduled tasklet */
-static inline void iwl_synchronize_irq(struct iwl_priv *priv)
-{
- /* wait to make sure we flush pending tasklet*/
- synchronize_irq(priv->pci_dev->irq);
- tasklet_kill(&priv->irq_tasklet);
-}
-
-static const char *desc_lookup(int i)
-{
- switch (i) {
- case 1:
- return "FAIL";
- case 2:
- return "BAD_PARAM";
- case 3:
- return "BAD_CHECKSUM";
- case 4:
- return "NMI_INTERRUPT";
- case 5:
- return "SYSASSERT";
- case 6:
- return "FATAL_ERROR";
- }
-
- return "UNKNOWN";
-}
-
-#define ERROR_START_OFFSET (1 * sizeof(u32))
-#define ERROR_ELEM_SIZE (7 * sizeof(u32))
-
-void iwl3945_dump_nic_error_log(struct iwl_priv *priv)
-{
- u32 i;
- u32 desc, time, count, base, data1;
- u32 blink1, blink2, ilink1, ilink2;
-
- base = le32_to_cpu(priv->card_alive.error_event_table_ptr);
-
- if (!iwl3945_hw_valid_rtc_data_addr(base)) {
- IWL_ERR(priv, "Not valid error log pointer 0x%08X\n", base);
- return;
- }
-
-
- count = iwl_read_targ_mem(priv, base);
-
- if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) {
- IWL_ERR(priv, "Start IWL Error Log Dump:\n");
- IWL_ERR(priv, "Status: 0x%08lX, count: %d\n",
- priv->status, count);
- }
-
- IWL_ERR(priv, "Desc Time asrtPC blink2 "
- "ilink1 nmiPC Line\n");
- for (i = ERROR_START_OFFSET;
- i < (count * ERROR_ELEM_SIZE) + ERROR_START_OFFSET;
- i += ERROR_ELEM_SIZE) {
- desc = iwl_read_targ_mem(priv, base + i);
- time =
- iwl_read_targ_mem(priv, base + i + 1 * sizeof(u32));
- blink1 =
- iwl_read_targ_mem(priv, base + i + 2 * sizeof(u32));
- blink2 =
- iwl_read_targ_mem(priv, base + i + 3 * sizeof(u32));
- ilink1 =
- iwl_read_targ_mem(priv, base + i + 4 * sizeof(u32));
- ilink2 =
- iwl_read_targ_mem(priv, base + i + 5 * sizeof(u32));
- data1 =
- iwl_read_targ_mem(priv, base + i + 6 * sizeof(u32));
-
- IWL_ERR(priv,
- "%-13s (0x%X) %010u 0x%05X 0x%05X 0x%05X 0x%05X %u\n\n",
- desc_lookup(desc), desc, time, blink1, blink2,
- ilink1, ilink2, data1);
- trace_iwlwifi_dev_ucode_error(priv, desc, time, data1, 0,
- 0, blink1, blink2, ilink1, ilink2);
- }
-}
-
-#define EVENT_START_OFFSET (6 * sizeof(u32))
-
-/**
- * iwl3945_print_event_log - Dump error event log to syslog
- *
- */
-static int iwl3945_print_event_log(struct iwl_priv *priv, u32 start_idx,
- u32 num_events, u32 mode,
- int pos, char **buf, size_t bufsz)
-{
- u32 i;
- u32 base; /* SRAM byte address of event log header */
- u32 event_size; /* 2 u32s, or 3 u32s if timestamp recorded */
- u32 ptr; /* SRAM byte address of log data */
- u32 ev, time, data; /* event log data */
- unsigned long reg_flags;
-
- if (num_events == 0)
- return pos;
-
- base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
-
- if (mode == 0)
- event_size = 2 * sizeof(u32);
- else
- event_size = 3 * sizeof(u32);
-
- ptr = base + EVENT_START_OFFSET + (start_idx * event_size);
-
- /* Make sure device is powered up for SRAM reads */
- spin_lock_irqsave(&priv->reg_lock, reg_flags);
- iwl_grab_nic_access(priv);
-
- /* Set starting address; reads will auto-increment */
- _iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, ptr);
- rmb();
-
- /* "time" is actually "data" for mode 0 (no timestamp).
- * place event id # at far right for easier visual parsing. */
- for (i = 0; i < num_events; i++) {
- ev = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
- time = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
- if (mode == 0) {
- /* data, ev */
- if (bufsz) {
- pos += scnprintf(*buf + pos, bufsz - pos,
- "0x%08x:%04u\n",
- time, ev);
- } else {
- IWL_ERR(priv, "0x%08x\t%04u\n", time, ev);
- trace_iwlwifi_dev_ucode_event(priv, 0,
- time, ev);
- }
- } else {
- data = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
- if (bufsz) {
- pos += scnprintf(*buf + pos, bufsz - pos,
- "%010u:0x%08x:%04u\n",
- time, data, ev);
- } else {
- IWL_ERR(priv, "%010u\t0x%08x\t%04u\n",
- time, data, ev);
- trace_iwlwifi_dev_ucode_event(priv, time,
- data, ev);
- }
- }
- }
-
- /* Allow device to power down */
- iwl_release_nic_access(priv);
- spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
- return pos;
-}
-
-/**
- * iwl3945_print_last_event_logs - Dump the newest # of event log to syslog
- */
-static int iwl3945_print_last_event_logs(struct iwl_priv *priv, u32 capacity,
- u32 num_wraps, u32 next_entry,
- u32 size, u32 mode,
- int pos, char **buf, size_t bufsz)
-{
- /*
- * display the newest DEFAULT_LOG_ENTRIES entries
- * i.e the entries just before the next ont that uCode would fill.
- */
- if (num_wraps) {
- if (next_entry < size) {
- pos = iwl3945_print_event_log(priv,
- capacity - (size - next_entry),
- size - next_entry, mode,
- pos, buf, bufsz);
- pos = iwl3945_print_event_log(priv, 0,
- next_entry, mode,
- pos, buf, bufsz);
- } else
- pos = iwl3945_print_event_log(priv, next_entry - size,
- size, mode,
- pos, buf, bufsz);
- } else {
- if (next_entry < size)
- pos = iwl3945_print_event_log(priv, 0,
- next_entry, mode,
- pos, buf, bufsz);
- else
- pos = iwl3945_print_event_log(priv, next_entry - size,
- size, mode,
- pos, buf, bufsz);
- }
- return pos;
-}
-
-#define DEFAULT_IWL3945_DUMP_EVENT_LOG_ENTRIES (20)
-
-int iwl3945_dump_nic_event_log(struct iwl_priv *priv, bool full_log,
- char **buf, bool display)
-{
- u32 base; /* SRAM byte address of event log header */
- u32 capacity; /* event log capacity in # entries */
- u32 mode; /* 0 - no timestamp, 1 - timestamp recorded */
- u32 num_wraps; /* # times uCode wrapped to top of log */
- u32 next_entry; /* index of next entry to be written by uCode */
- u32 size; /* # entries that we'll print */
- int pos = 0;
- size_t bufsz = 0;
-
- base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
- if (!iwl3945_hw_valid_rtc_data_addr(base)) {
- IWL_ERR(priv, "Invalid event log pointer 0x%08X\n", base);
- return -EINVAL;
- }
-
- /* event log header */
- capacity = iwl_read_targ_mem(priv, base);
- mode = iwl_read_targ_mem(priv, base + (1 * sizeof(u32)));
- num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32)));
- next_entry = iwl_read_targ_mem(priv, base + (3 * sizeof(u32)));
-
- if (capacity > priv->cfg->base_params->max_event_log_size) {
- IWL_ERR(priv, "Log capacity %d is bogus, limit to %d entries\n",
- capacity, priv->cfg->base_params->max_event_log_size);
- capacity = priv->cfg->base_params->max_event_log_size;
- }
-
- if (next_entry > priv->cfg->base_params->max_event_log_size) {
- IWL_ERR(priv, "Log write index %d is bogus, limit to %d\n",
- next_entry, priv->cfg->base_params->max_event_log_size);
- next_entry = priv->cfg->base_params->max_event_log_size;
- }
-
- size = num_wraps ? capacity : next_entry;
-
- /* bail out if nothing in log */
- if (size == 0) {
- IWL_ERR(priv, "Start IWL Event Log Dump: nothing in log\n");
- return pos;
- }
-
-#ifdef CONFIG_IWLWIFI_DEBUG
- if (!(iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) && !full_log)
- size = (size > DEFAULT_IWL3945_DUMP_EVENT_LOG_ENTRIES)
- ? DEFAULT_IWL3945_DUMP_EVENT_LOG_ENTRIES : size;
-#else
- size = (size > DEFAULT_IWL3945_DUMP_EVENT_LOG_ENTRIES)
- ? DEFAULT_IWL3945_DUMP_EVENT_LOG_ENTRIES : size;
-#endif
-
- IWL_ERR(priv, "Start IWL Event Log Dump: display last %d count\n",
- size);
-
-#ifdef CONFIG_IWLWIFI_DEBUG
- if (display) {
- if (full_log)
- bufsz = capacity * 48;
- else
- bufsz = size * 48;
- *buf = kmalloc(bufsz, GFP_KERNEL);
- if (!*buf)
- return -ENOMEM;
- }
- if ((iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) || full_log) {
- /* if uCode has wrapped back to top of log,
- * start at the oldest entry,
- * i.e the next one that uCode would fill.
- */
- if (num_wraps)
- pos = iwl3945_print_event_log(priv, next_entry,
- capacity - next_entry, mode,
- pos, buf, bufsz);
-
- /* (then/else) start at top of log */
- pos = iwl3945_print_event_log(priv, 0, next_entry, mode,
- pos, buf, bufsz);
- } else
- pos = iwl3945_print_last_event_logs(priv, capacity, num_wraps,
- next_entry, size, mode,
- pos, buf, bufsz);
-#else
- pos = iwl3945_print_last_event_logs(priv, capacity, num_wraps,
- next_entry, size, mode,
- pos, buf, bufsz);
-#endif
- return pos;
-}
-
-static void iwl3945_irq_tasklet(struct iwl_priv *priv)
-{
- u32 inta, handled = 0;
- u32 inta_fh;
- unsigned long flags;
-#ifdef CONFIG_IWLWIFI_DEBUG
- u32 inta_mask;
-#endif
-
- spin_lock_irqsave(&priv->lock, flags);
-
- /* Ack/clear/reset pending uCode interrupts.
- * Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
- * and will clear only when CSR_FH_INT_STATUS gets cleared. */
- inta = iwl_read32(priv, CSR_INT);
- iwl_write32(priv, CSR_INT, inta);
-
- /* Ack/clear/reset pending flow-handler (DMA) interrupts.
- * Any new interrupts that happen after this, either while we're
- * in this tasklet, or later, will show up in next ISR/tasklet. */
- inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
- iwl_write32(priv, CSR_FH_INT_STATUS, inta_fh);
-
-#ifdef CONFIG_IWLWIFI_DEBUG
- if (iwl_get_debug_level(priv) & IWL_DL_ISR) {
- /* just for debug */
- inta_mask = iwl_read32(priv, CSR_INT_MASK);
- IWL_DEBUG_ISR(priv, "inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
- inta, inta_mask, inta_fh);
- }
-#endif
-
- spin_unlock_irqrestore(&priv->lock, flags);
-
- /* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not
- * atomic, make sure that inta covers all the interrupts that
- * we've discovered, even if FH interrupt came in just after
- * reading CSR_INT. */
- if (inta_fh & CSR39_FH_INT_RX_MASK)
- inta |= CSR_INT_BIT_FH_RX;
- if (inta_fh & CSR39_FH_INT_TX_MASK)
- inta |= CSR_INT_BIT_FH_TX;
-
- /* Now service all interrupt bits discovered above. */
- if (inta & CSR_INT_BIT_HW_ERR) {
- IWL_ERR(priv, "Hardware error detected. Restarting.\n");
-
- /* Tell the device to stop sending interrupts */
- iwl_disable_interrupts(priv);
-
- priv->isr_stats.hw++;
- iwl_irq_handle_error(priv);
-
- handled |= CSR_INT_BIT_HW_ERR;
-
- return;
- }
-
-#ifdef CONFIG_IWLWIFI_DEBUG
- if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) {
- /* NIC fires this, but we don't use it, redundant with WAKEUP */
- if (inta & CSR_INT_BIT_SCD) {
- IWL_DEBUG_ISR(priv, "Scheduler finished to transmit "
- "the frame/frames.\n");
- priv->isr_stats.sch++;
- }
-
- /* Alive notification via Rx interrupt will do the real work */
- if (inta & CSR_INT_BIT_ALIVE) {
- IWL_DEBUG_ISR(priv, "Alive interrupt\n");
- priv->isr_stats.alive++;
- }
- }
-#endif
- /* Safely ignore these bits for debug checks below */
- inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
-
- /* Error detected by uCode */
- if (inta & CSR_INT_BIT_SW_ERR) {
- IWL_ERR(priv, "Microcode SW error detected. "
- "Restarting 0x%X.\n", inta);
- priv->isr_stats.sw++;
- iwl_irq_handle_error(priv);
- handled |= CSR_INT_BIT_SW_ERR;
- }
-
- /* uCode wakes up after power-down sleep */
- if (inta & CSR_INT_BIT_WAKEUP) {
- IWL_DEBUG_ISR(priv, "Wakeup interrupt\n");
- iwl_rx_queue_update_write_ptr(priv, &priv->rxq);
- iwl_txq_update_write_ptr(priv, &priv->txq[0]);
- iwl_txq_update_write_ptr(priv, &priv->txq[1]);
- iwl_txq_update_write_ptr(priv, &priv->txq[2]);
- iwl_txq_update_write_ptr(priv, &priv->txq[3]);
- iwl_txq_update_write_ptr(priv, &priv->txq[4]);
- iwl_txq_update_write_ptr(priv, &priv->txq[5]);
-
- priv->isr_stats.wakeup++;
- handled |= CSR_INT_BIT_WAKEUP;
- }
-
- /* All uCode command responses, including Tx command responses,
- * Rx "responses" (frame-received notification), and other
- * notifications from uCode come through here*/
- if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
- iwl3945_rx_handle(priv);
- priv->isr_stats.rx++;
- handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
- }
-
- if (inta & CSR_INT_BIT_FH_TX) {
- IWL_DEBUG_ISR(priv, "Tx interrupt\n");
- priv->isr_stats.tx++;
-
- iwl_write32(priv, CSR_FH_INT_STATUS, (1 << 6));
- iwl_write_direct32(priv, FH39_TCSR_CREDIT
- (FH39_SRVC_CHNL), 0x0);
- handled |= CSR_INT_BIT_FH_TX;
- }
-
- if (inta & ~handled) {
- IWL_ERR(priv, "Unhandled INTA bits 0x%08x\n", inta & ~handled);
- priv->isr_stats.unhandled++;
- }
-
- if (inta & ~priv->inta_mask) {
- IWL_WARN(priv, "Disabled INTA bits 0x%08x were pending\n",
- inta & ~priv->inta_mask);
- IWL_WARN(priv, " with FH_INT = 0x%08x\n", inta_fh);
- }
-
- /* Re-enable all interrupts */
- /* only Re-enable if disabled by irq */
- if (test_bit(STATUS_INT_ENABLED, &priv->status))
- iwl_enable_interrupts(priv);
-
-#ifdef CONFIG_IWLWIFI_DEBUG
- if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) {
- inta = iwl_read32(priv, CSR_INT);
- inta_mask = iwl_read32(priv, CSR_INT_MASK);
- inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
- IWL_DEBUG_ISR(priv, "End inta 0x%08x, enabled 0x%08x, fh 0x%08x, "
- "flags 0x%08lx\n", inta, inta_mask, inta_fh, flags);
- }
-#endif
-}
-
-static int iwl3945_get_single_channel_for_scan(struct iwl_priv *priv,
- struct ieee80211_vif *vif,
- enum ieee80211_band band,
- struct iwl3945_scan_channel *scan_ch)
-{
- const struct ieee80211_supported_band *sband;
- u16 passive_dwell = 0;
- u16 active_dwell = 0;
- int added = 0;
- u8 channel = 0;
-
- sband = iwl_get_hw_mode(priv, band);
- if (!sband) {
- IWL_ERR(priv, "invalid band\n");
- return added;
- }
-
- active_dwell = iwl_get_active_dwell_time(priv, band, 0);
- passive_dwell = iwl_get_passive_dwell_time(priv, band, vif);
-
- if (passive_dwell <= active_dwell)
- passive_dwell = active_dwell + 1;
-
-
- channel = iwl_get_single_channel_number(priv, band);
-
- if (channel) {
- scan_ch->channel = channel;
- scan_ch->type = 0; /* passive */
- scan_ch->active_dwell = cpu_to_le16(active_dwell);
- scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
- /* Set txpower levels to defaults */
- scan_ch->tpc.dsp_atten = 110;
- if (band == IEEE80211_BAND_5GHZ)
- scan_ch->tpc.tx_gain = ((1 << 5) | (3 << 3)) | 3;
- else
- scan_ch->tpc.tx_gain = ((1 << 5) | (5 << 3));
- added++;
- } else
- IWL_ERR(priv, "no valid channel found\n");
- return added;
-}
-
-static int iwl3945_get_channels_for_scan(struct iwl_priv *priv,
- enum ieee80211_band band,
- u8 is_active, u8 n_probes,
- struct iwl3945_scan_channel *scan_ch,
- struct ieee80211_vif *vif)
-{
- struct ieee80211_channel *chan;
- const struct ieee80211_supported_band *sband;
- const struct iwl_channel_info *ch_info;
- u16 passive_dwell = 0;
- u16 active_dwell = 0;
- int added, i;
-
- sband = iwl_get_hw_mode(priv, band);
- if (!sband)
- return 0;
-
- active_dwell = iwl_get_active_dwell_time(priv, band, n_probes);
- passive_dwell = iwl_get_passive_dwell_time(priv, band, vif);
-
- if (passive_dwell <= active_dwell)
- passive_dwell = active_dwell + 1;
-
- for (i = 0, added = 0; i < priv->scan_request->n_channels; i++) {
- chan = priv->scan_request->channels[i];
-
- if (chan->band != band)
- continue;
-
- scan_ch->channel = chan->hw_value;
-
- ch_info = iwl_get_channel_info(priv, band, scan_ch->channel);
- if (!is_channel_valid(ch_info)) {
- IWL_DEBUG_SCAN(priv, "Channel %d is INVALID for this band.\n",
- scan_ch->channel);
- continue;
- }
-
- scan_ch->active_dwell = cpu_to_le16(active_dwell);
- scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
- /* If passive , set up for auto-switch
- * and use long active_dwell time.
- */
- if (!is_active || is_channel_passive(ch_info) ||
- (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN)) {
- scan_ch->type = 0; /* passive */
- if (IWL_UCODE_API(priv->ucode_ver) == 1)
- scan_ch->active_dwell = cpu_to_le16(passive_dwell - 1);
- } else {
- scan_ch->type = 1; /* active */
- }
-
- /* Set direct probe bits. These may be used both for active
- * scan channels (probes gets sent right away),
- * or for passive channels (probes get se sent only after
- * hearing clear Rx packet).*/
- if (IWL_UCODE_API(priv->ucode_ver) >= 2) {
- if (n_probes)
- scan_ch->type |= IWL39_SCAN_PROBE_MASK(n_probes);
- } else {
- /* uCode v1 does not allow setting direct probe bits on
- * passive channel. */
- if ((scan_ch->type & 1) && n_probes)
- scan_ch->type |= IWL39_SCAN_PROBE_MASK(n_probes);
- }
-
- /* Set txpower levels to defaults */
- scan_ch->tpc.dsp_atten = 110;
- /* scan_pwr_info->tpc.dsp_atten; */
-
- /*scan_pwr_info->tpc.tx_gain; */
- if (band == IEEE80211_BAND_5GHZ)
- scan_ch->tpc.tx_gain = ((1 << 5) | (3 << 3)) | 3;
- else {
- scan_ch->tpc.tx_gain = ((1 << 5) | (5 << 3));
- /* NOTE: if we were doing 6Mb OFDM for scans we'd use
- * power level:
- * scan_ch->tpc.tx_gain = ((1 << 5) | (2 << 3)) | 3;
- */
- }
-
- IWL_DEBUG_SCAN(priv, "Scanning %d [%s %d]\n",
- scan_ch->channel,
- (scan_ch->type & 1) ? "ACTIVE" : "PASSIVE",
- (scan_ch->type & 1) ?
- active_dwell : passive_dwell);
-
- scan_ch++;
- added++;
- }
-
- IWL_DEBUG_SCAN(priv, "total channels to scan %d\n", added);
- return added;
-}
-
-static void iwl3945_init_hw_rates(struct iwl_priv *priv,
- struct ieee80211_rate *rates)
-{
- int i;
-
- for (i = 0; i < IWL_RATE_COUNT_LEGACY; i++) {
- rates[i].bitrate = iwl3945_rates[i].ieee * 5;
- rates[i].hw_value = i; /* Rate scaling will work on indexes */
- rates[i].hw_value_short = i;
- rates[i].flags = 0;
- if ((i > IWL39_LAST_OFDM_RATE) || (i < IWL_FIRST_OFDM_RATE)) {
- /*
- * If CCK != 1M then set short preamble rate flag.
- */
- rates[i].flags |= (iwl3945_rates[i].plcp == 10) ?
- 0 : IEEE80211_RATE_SHORT_PREAMBLE;
- }
- }
-}
-
-/******************************************************************************
- *
- * uCode download functions
- *
- ******************************************************************************/
-
-static void iwl3945_dealloc_ucode_pci(struct iwl_priv *priv)
-{
- iwl_free_fw_desc(priv->pci_dev, &priv->ucode_code);
- iwl_free_fw_desc(priv->pci_dev, &priv->ucode_data);
- iwl_free_fw_desc(priv->pci_dev, &priv->ucode_data_backup);
- iwl_free_fw_desc(priv->pci_dev, &priv->ucode_init);
- iwl_free_fw_desc(priv->pci_dev, &priv->ucode_init_data);
- iwl_free_fw_desc(priv->pci_dev, &priv->ucode_boot);
-}
-
-/**
- * iwl3945_verify_inst_full - verify runtime uCode image in card vs. host,
- * looking at all data.
- */
-static int iwl3945_verify_inst_full(struct iwl_priv *priv, __le32 *image, u32 len)
-{
- u32 val;
- u32 save_len = len;
- int rc = 0;
- u32 errcnt;
-
- IWL_DEBUG_INFO(priv, "ucode inst image size is %u\n", len);
-
- iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR,
- IWL39_RTC_INST_LOWER_BOUND);
-
- errcnt = 0;
- for (; len > 0; len -= sizeof(u32), image++) {
- /* read data comes through single port, auto-incr addr */
- /* NOTE: Use the debugless read so we don't flood kernel log
- * if IWL_DL_IO is set */
- val = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
- if (val != le32_to_cpu(*image)) {
- IWL_ERR(priv, "uCode INST section is invalid at "
- "offset 0x%x, is 0x%x, s/b 0x%x\n",
- save_len - len, val, le32_to_cpu(*image));
- rc = -EIO;
- errcnt++;
- if (errcnt >= 20)
- break;
- }
- }
-
-
- if (!errcnt)
- IWL_DEBUG_INFO(priv,
- "ucode image in INSTRUCTION memory is good\n");
-
- return rc;
-}
-
-
-/**
- * iwl3945_verify_inst_sparse - verify runtime uCode image in card vs. host,
- * using sample data 100 bytes apart. If these sample points are good,
- * it's a pretty good bet that everything between them is good, too.
- */
-static int iwl3945_verify_inst_sparse(struct iwl_priv *priv, __le32 *image, u32 len)
-{
- u32 val;
- int rc = 0;
- u32 errcnt = 0;
- u32 i;
-
- IWL_DEBUG_INFO(priv, "ucode inst image size is %u\n", len);
-
- for (i = 0; i < len; i += 100, image += 100/sizeof(u32)) {
- /* read data comes through single port, auto-incr addr */
- /* NOTE: Use the debugless read so we don't flood kernel log
- * if IWL_DL_IO is set */
- iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR,
- i + IWL39_RTC_INST_LOWER_BOUND);
- val = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
- if (val != le32_to_cpu(*image)) {
-#if 0 /* Enable this if you want to see details */
- IWL_ERR(priv, "uCode INST section is invalid at "
- "offset 0x%x, is 0x%x, s/b 0x%x\n",
- i, val, *image);
-#endif
- rc = -EIO;
- errcnt++;
- if (errcnt >= 3)
- break;
- }
- }
-
- return rc;
-}
-
-
-/**
- * iwl3945_verify_ucode - determine which instruction image is in SRAM,
- * and verify its contents
- */
-static int iwl3945_verify_ucode(struct iwl_priv *priv)
-{
- __le32 *image;
- u32 len;
- int rc = 0;
-
- /* Try bootstrap */
- image = (__le32 *)priv->ucode_boot.v_addr;
- len = priv->ucode_boot.len;
- rc = iwl3945_verify_inst_sparse(priv, image, len);
- if (rc == 0) {
- IWL_DEBUG_INFO(priv, "Bootstrap uCode is good in inst SRAM\n");
- return 0;
- }
-
- /* Try initialize */
- image = (__le32 *)priv->ucode_init.v_addr;
- len = priv->ucode_init.len;
- rc = iwl3945_verify_inst_sparse(priv, image, len);
- if (rc == 0) {
- IWL_DEBUG_INFO(priv, "Initialize uCode is good in inst SRAM\n");
- return 0;
- }
-
- /* Try runtime/protocol */
- image = (__le32 *)priv->ucode_code.v_addr;
- len = priv->ucode_code.len;
- rc = iwl3945_verify_inst_sparse(priv, image, len);
- if (rc == 0) {
- IWL_DEBUG_INFO(priv, "Runtime uCode is good in inst SRAM\n");
- return 0;
- }
-
- IWL_ERR(priv, "NO VALID UCODE IMAGE IN INSTRUCTION SRAM!!\n");
-
- /* Since nothing seems to match, show first several data entries in
- * instruction SRAM, so maybe visual inspection will give a clue.
- * Selection of bootstrap image (vs. other images) is arbitrary. */
- image = (__le32 *)priv->ucode_boot.v_addr;
- len = priv->ucode_boot.len;
- rc = iwl3945_verify_inst_full(priv, image, len);
-
- return rc;
-}
-
-static void iwl3945_nic_start(struct iwl_priv *priv)
-{
- /* Remove all resets to allow NIC to operate */
- iwl_write32(priv, CSR_RESET, 0);
-}
-
-#define IWL3945_UCODE_GET(item) \
-static u32 iwl3945_ucode_get_##item(const struct iwl_ucode_header *ucode)\
-{ \
- return le32_to_cpu(ucode->u.v1.item); \
-}
-
-static u32 iwl3945_ucode_get_header_size(u32 api_ver)
-{
- return 24;
-}
-
-static u8 *iwl3945_ucode_get_data(const struct iwl_ucode_header *ucode)
-{
- return (u8 *) ucode->u.v1.data;
-}
-
-IWL3945_UCODE_GET(inst_size);
-IWL3945_UCODE_GET(data_size);
-IWL3945_UCODE_GET(init_size);
-IWL3945_UCODE_GET(init_data_size);
-IWL3945_UCODE_GET(boot_size);
-
-/**
- * iwl3945_read_ucode - Read uCode images from disk file.
- *
- * Copy into buffers for card to fetch via bus-mastering
- */
-static int iwl3945_read_ucode(struct iwl_priv *priv)
-{
- const struct iwl_ucode_header *ucode;
- int ret = -EINVAL, index;
- const struct firmware *ucode_raw;
- /* firmware file name contains uCode/driver compatibility version */
- const char *name_pre = priv->cfg->fw_name_pre;
- const unsigned int api_max = priv->cfg->ucode_api_max;
- const unsigned int api_min = priv->cfg->ucode_api_min;
- char buf[25];
- u8 *src;
- size_t len;
- u32 api_ver, inst_size, data_size, init_size, init_data_size, boot_size;
-
- /* Ask kernel firmware_class module to get the boot firmware off disk.
- * request_firmware() is synchronous, file is in memory on return. */
- for (index = api_max; index >= api_min; index--) {
- sprintf(buf, "%s%u%s", name_pre, index, ".ucode");
- ret = request_firmware(&ucode_raw, buf, &priv->pci_dev->dev);
- if (ret < 0) {
- IWL_ERR(priv, "%s firmware file req failed: %d\n",
- buf, ret);
- if (ret == -ENOENT)
- continue;
- else
- goto error;
- } else {
- if (index < api_max)
- IWL_ERR(priv, "Loaded firmware %s, "
- "which is deprecated. "
- " Please use API v%u instead.\n",
- buf, api_max);
- IWL_DEBUG_INFO(priv, "Got firmware '%s' file "
- "(%zd bytes) from disk\n",
- buf, ucode_raw->size);
- break;
- }
- }
-
- if (ret < 0)
- goto error;
-
- /* Make sure that we got at least our header! */
- if (ucode_raw->size < iwl3945_ucode_get_header_size(1)) {
- IWL_ERR(priv, "File size way too small!\n");
- ret = -EINVAL;
- goto err_release;
- }
-
- /* Data from ucode file: header followed by uCode images */
- ucode = (struct iwl_ucode_header *)ucode_raw->data;
-
- priv->ucode_ver = le32_to_cpu(ucode->ver);
- api_ver = IWL_UCODE_API(priv->ucode_ver);
- inst_size = iwl3945_ucode_get_inst_size(ucode);
- data_size = iwl3945_ucode_get_data_size(ucode);
- init_size = iwl3945_ucode_get_init_size(ucode);
- init_data_size = iwl3945_ucode_get_init_data_size(ucode);
- boot_size = iwl3945_ucode_get_boot_size(ucode);
- src = iwl3945_ucode_get_data(ucode);
-
- /* api_ver should match the api version forming part of the
- * firmware filename ... but we don't check for that and only rely
- * on the API version read from firmware header from here on forward */
-
- if (api_ver < api_min || api_ver > api_max) {
- IWL_ERR(priv, "Driver unable to support your firmware API. "
- "Driver supports v%u, firmware is v%u.\n",
- api_max, api_ver);
- priv->ucode_ver = 0;
- ret = -EINVAL;
- goto err_release;
- }
- if (api_ver != api_max)
- IWL_ERR(priv, "Firmware has old API version. Expected %u, "
- "got %u. New firmware can be obtained "
- "from http://www.intellinuxwireless.org.\n",
- api_max, api_ver);
-
- IWL_INFO(priv, "loaded firmware version %u.%u.%u.%u\n",
- IWL_UCODE_MAJOR(priv->ucode_ver),
- IWL_UCODE_MINOR(priv->ucode_ver),
- IWL_UCODE_API(priv->ucode_ver),
- IWL_UCODE_SERIAL(priv->ucode_ver));
-
- snprintf(priv->hw->wiphy->fw_version,
- sizeof(priv->hw->wiphy->fw_version),
- "%u.%u.%u.%u",
- IWL_UCODE_MAJOR(priv->ucode_ver),
- IWL_UCODE_MINOR(priv->ucode_ver),
- IWL_UCODE_API(priv->ucode_ver),
- IWL_UCODE_SERIAL(priv->ucode_ver));
-
- IWL_DEBUG_INFO(priv, "f/w package hdr ucode version raw = 0x%x\n",
- priv->ucode_ver);
- IWL_DEBUG_INFO(priv, "f/w package hdr runtime inst size = %u\n",
- inst_size);
- IWL_DEBUG_INFO(priv, "f/w package hdr runtime data size = %u\n",
- data_size);
- IWL_DEBUG_INFO(priv, "f/w package hdr init inst size = %u\n",
- init_size);
- IWL_DEBUG_INFO(priv, "f/w package hdr init data size = %u\n",
- init_data_size);
- IWL_DEBUG_INFO(priv, "f/w package hdr boot inst size = %u\n",
- boot_size);
-
-
- /* Verify size of file vs. image size info in file's header */
- if (ucode_raw->size != iwl3945_ucode_get_header_size(api_ver) +
- inst_size + data_size + init_size +
- init_data_size + boot_size) {
-
- IWL_DEBUG_INFO(priv,
- "uCode file size %zd does not match expected size\n",
- ucode_raw->size);
- ret = -EINVAL;
- goto err_release;
- }
-
- /* Verify that uCode images will fit in card's SRAM */
- if (inst_size > IWL39_MAX_INST_SIZE) {
- IWL_DEBUG_INFO(priv, "uCode instr len %d too large to fit in\n",
- inst_size);
- ret = -EINVAL;
- goto err_release;
- }
-
- if (data_size > IWL39_MAX_DATA_SIZE) {
- IWL_DEBUG_INFO(priv, "uCode data len %d too large to fit in\n",
- data_size);
- ret = -EINVAL;
- goto err_release;
- }
- if (init_size > IWL39_MAX_INST_SIZE) {
- IWL_DEBUG_INFO(priv,
- "uCode init instr len %d too large to fit in\n",
- init_size);
- ret = -EINVAL;
- goto err_release;
- }
- if (init_data_size > IWL39_MAX_DATA_SIZE) {
- IWL_DEBUG_INFO(priv,
- "uCode init data len %d too large to fit in\n",
- init_data_size);
- ret = -EINVAL;
- goto err_release;
- }
- if (boot_size > IWL39_MAX_BSM_SIZE) {
- IWL_DEBUG_INFO(priv,
- "uCode boot instr len %d too large to fit in\n",
- boot_size);
- ret = -EINVAL;
- goto err_release;
- }
-
- /* Allocate ucode buffers for card's bus-master loading ... */
-
- /* Runtime instructions and 2 copies of data:
- * 1) unmodified from disk
- * 2) backup cache for save/restore during power-downs */
- priv->ucode_code.len = inst_size;
- iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_code);
-
- priv->ucode_data.len = data_size;
- iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data);
-
- priv->ucode_data_backup.len = data_size;
- iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data_backup);
-
- if (!priv->ucode_code.v_addr || !priv->ucode_data.v_addr ||
- !priv->ucode_data_backup.v_addr)
- goto err_pci_alloc;
-
- /* Initialization instructions and data */
- if (init_size && init_data_size) {
- priv->ucode_init.len = init_size;
- iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init);
-
- priv->ucode_init_data.len = init_data_size;
- iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init_data);
-
- if (!priv->ucode_init.v_addr || !priv->ucode_init_data.v_addr)
- goto err_pci_alloc;
- }
-
- /* Bootstrap (instructions only, no data) */
- if (boot_size) {
- priv->ucode_boot.len = boot_size;
- iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_boot);
-
- if (!priv->ucode_boot.v_addr)
- goto err_pci_alloc;
- }
-
- /* Copy images into buffers for card's bus-master reads ... */
-
- /* Runtime instructions (first block of data in file) */
- len = inst_size;
- IWL_DEBUG_INFO(priv,
- "Copying (but not loading) uCode instr len %zd\n", len);
- memcpy(priv->ucode_code.v_addr, src, len);
- src += len;
-
- IWL_DEBUG_INFO(priv, "uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n",
- priv->ucode_code.v_addr, (u32)priv->ucode_code.p_addr);
-
- /* Runtime data (2nd block)
- * NOTE: Copy into backup buffer will be done in iwl3945_up() */
- len = data_size;
- IWL_DEBUG_INFO(priv,
- "Copying (but not loading) uCode data len %zd\n", len);
- memcpy(priv->ucode_data.v_addr, src, len);
- memcpy(priv->ucode_data_backup.v_addr, src, len);
- src += len;
-
- /* Initialization instructions (3rd block) */
- if (init_size) {
- len = init_size;
- IWL_DEBUG_INFO(priv,
- "Copying (but not loading) init instr len %zd\n", len);
- memcpy(priv->ucode_init.v_addr, src, len);
- src += len;
- }
-
- /* Initialization data (4th block) */
- if (init_data_size) {
- len = init_data_size;
- IWL_DEBUG_INFO(priv,
- "Copying (but not loading) init data len %zd\n", len);
- memcpy(priv->ucode_init_data.v_addr, src, len);
- src += len;
- }
-
- /* Bootstrap instructions (5th block) */
- len = boot_size;
- IWL_DEBUG_INFO(priv,
- "Copying (but not loading) boot instr len %zd\n", len);
- memcpy(priv->ucode_boot.v_addr, src, len);
-
- /* We have our copies now, allow OS release its copies */
- release_firmware(ucode_raw);
- return 0;
-
- err_pci_alloc:
- IWL_ERR(priv, "failed to allocate pci memory\n");
- ret = -ENOMEM;
- iwl3945_dealloc_ucode_pci(priv);
-
- err_release:
- release_firmware(ucode_raw);
-
- error:
- return ret;
-}
-
-
-/**
- * iwl3945_set_ucode_ptrs - Set uCode address location
- *
- * Tell initialization uCode where to find runtime uCode.
- *
- * BSM registers initially contain pointers to initialization uCode.
- * We need to replace them to load runtime uCode inst and data,
- * and to save runtime data when powering down.
- */
-static int iwl3945_set_ucode_ptrs(struct iwl_priv *priv)
-{
- dma_addr_t pinst;
- dma_addr_t pdata;
-
- /* bits 31:0 for 3945 */
- pinst = priv->ucode_code.p_addr;
- pdata = priv->ucode_data_backup.p_addr;
-
- /* Tell bootstrap uCode where to find image to load */
- iwl_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst);
- iwl_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata);
- iwl_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG,
- priv->ucode_data.len);
-
- /* Inst byte count must be last to set up, bit 31 signals uCode
- * that all new ptr/size info is in place */
- iwl_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG,
- priv->ucode_code.len | BSM_DRAM_INST_LOAD);
-
- IWL_DEBUG_INFO(priv, "Runtime uCode pointers are set.\n");
-
- return 0;
-}
-
-/**
- * iwl3945_init_alive_start - Called after REPLY_ALIVE notification received
- *
- * Called after REPLY_ALIVE notification received from "initialize" uCode.
- *
- * Tell "initialize" uCode to go ahead and load the runtime uCode.
- */
-static void iwl3945_init_alive_start(struct iwl_priv *priv)
-{
- /* Check alive response for "valid" sign from uCode */
- if (priv->card_alive_init.is_valid != UCODE_VALID_OK) {
- /* We had an error bringing up the hardware, so take it
- * all the way back down so we can try again */
- IWL_DEBUG_INFO(priv, "Initialize Alive failed.\n");
- goto restart;
- }
-
- /* Bootstrap uCode has loaded initialize uCode ... verify inst image.
- * This is a paranoid check, because we would not have gotten the
- * "initialize" alive if code weren't properly loaded. */
- if (iwl3945_verify_ucode(priv)) {
- /* Runtime instruction load was bad;
- * take it all the way back down so we can try again */
- IWL_DEBUG_INFO(priv, "Bad \"initialize\" uCode load.\n");
- goto restart;
- }
-
- /* Send pointers to protocol/runtime uCode image ... init code will
- * load and launch runtime uCode, which will send us another "Alive"
- * notification. */
- IWL_DEBUG_INFO(priv, "Initialization Alive received.\n");
- if (iwl3945_set_ucode_ptrs(priv)) {
- /* Runtime instruction load won't happen;
- * take it all the way back down so we can try again */
- IWL_DEBUG_INFO(priv, "Couldn't set up uCode pointers.\n");
- goto restart;
- }
- return;
-
- restart:
- queue_work(priv->workqueue, &priv->restart);
-}
-
-/**
- * iwl3945_alive_start - called after REPLY_ALIVE notification received
- * from protocol/runtime uCode (initialization uCode's
- * Alive gets handled by iwl3945_init_alive_start()).
- */
-static void iwl3945_alive_start(struct iwl_priv *priv)
-{
- int thermal_spin = 0;
- u32 rfkill;
- struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
-
- IWL_DEBUG_INFO(priv, "Runtime Alive received.\n");
-
- if (priv->card_alive.is_valid != UCODE_VALID_OK) {
- /* We had an error bringing up the hardware, so take it
- * all the way back down so we can try again */
- IWL_DEBUG_INFO(priv, "Alive failed.\n");
- goto restart;
- }
-
- /* Initialize uCode has loaded Runtime uCode ... verify inst image.
- * This is a paranoid check, because we would not have gotten the
- * "runtime" alive if code weren't properly loaded. */
- if (iwl3945_verify_ucode(priv)) {
- /* Runtime instruction load was bad;
- * take it all the way back down so we can try again */
- IWL_DEBUG_INFO(priv, "Bad runtime uCode load.\n");
- goto restart;
- }
-
- rfkill = iwl_read_prph(priv, APMG_RFKILL_REG);
- IWL_DEBUG_INFO(priv, "RFKILL status: 0x%x\n", rfkill);
-
- if (rfkill & 0x1) {
- clear_bit(STATUS_RF_KILL_HW, &priv->status);
- /* if RFKILL is not on, then wait for thermal
- * sensor in adapter to kick in */
- while (iwl3945_hw_get_temperature(priv) == 0) {
- thermal_spin++;
- udelay(10);
- }
-
- if (thermal_spin)
- IWL_DEBUG_INFO(priv, "Thermal calibration took %dus\n",
- thermal_spin * 10);
- } else
- set_bit(STATUS_RF_KILL_HW, &priv->status);
-
- /* After the ALIVE response, we can send commands to 3945 uCode */
- set_bit(STATUS_ALIVE, &priv->status);
-
- /* Enable watchdog to monitor the driver tx queues */
- iwl_setup_watchdog(priv);
-
- if (iwl_is_rfkill(priv))
- return;
-
- ieee80211_wake_queues(priv->hw);
-
- priv->active_rate = IWL_RATES_MASK_3945;
-
- iwl_power_update_mode(priv, true);
-
- if (iwl_is_associated(priv, IWL_RXON_CTX_BSS)) {
- struct iwl3945_rxon_cmd *active_rxon =
- (struct iwl3945_rxon_cmd *)(&ctx->active);
-
- ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
- active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
- } else {
- /* Initialize our rx_config data */
- iwl_connection_init_rx_config(priv, ctx);
- }
-
- /* Configure Bluetooth device coexistence support */
- priv->cfg->ops->hcmd->send_bt_config(priv);
-
- set_bit(STATUS_READY, &priv->status);
-
- /* Configure the adapter for unassociated operation */
- iwl3945_commit_rxon(priv, ctx);
-
- iwl3945_reg_txpower_periodic(priv);
-
- IWL_DEBUG_INFO(priv, "ALIVE processing complete.\n");
- wake_up_interruptible(&priv->wait_command_queue);
-
- return;
-
- restart:
- queue_work(priv->workqueue, &priv->restart);
-}
-
-static void iwl3945_cancel_deferred_work(struct iwl_priv *priv);
-
-static void __iwl3945_down(struct iwl_priv *priv)
-{
- unsigned long flags;
- int exit_pending;
-
- IWL_DEBUG_INFO(priv, DRV_NAME " is going down\n");
-
- iwl_scan_cancel_timeout(priv, 200);
-
- exit_pending = test_and_set_bit(STATUS_EXIT_PENDING, &priv->status);
-
- /* Stop TX queues watchdog. We need to have STATUS_EXIT_PENDING bit set
- * to prevent rearm timer */
- del_timer_sync(&priv->watchdog);
-
- /* Station information will now be cleared in device */
- iwl_clear_ucode_stations(priv, NULL);
- iwl_dealloc_bcast_stations(priv);
- iwl_clear_driver_stations(priv);
-
- /* Unblock any waiting calls */
- wake_up_interruptible_all(&priv->wait_command_queue);
-
- /* Wipe out the EXIT_PENDING status bit if we are not actually
- * exiting the module */
- if (!exit_pending)
- clear_bit(STATUS_EXIT_PENDING, &priv->status);
-
- /* stop and reset the on-board processor */
- iwl_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
-
- /* tell the device to stop sending interrupts */
- spin_lock_irqsave(&priv->lock, flags);
- iwl_disable_interrupts(priv);
- spin_unlock_irqrestore(&priv->lock, flags);
- iwl_synchronize_irq(priv);
-
- if (priv->mac80211_registered)
- ieee80211_stop_queues(priv->hw);
-
- /* If we have not previously called iwl3945_init() then
- * clear all bits but the RF Kill bits and return */
- if (!iwl_is_init(priv)) {
- priv->status = test_bit(STATUS_RF_KILL_HW, &priv->status) <<
- STATUS_RF_KILL_HW |
- test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
- STATUS_GEO_CONFIGURED |
- test_bit(STATUS_EXIT_PENDING, &priv->status) <<
- STATUS_EXIT_PENDING;
- goto exit;
- }
-
- /* ...otherwise clear out all the status bits but the RF Kill
- * bit and continue taking the NIC down. */
- priv->status &= test_bit(STATUS_RF_KILL_HW, &priv->status) <<
- STATUS_RF_KILL_HW |
- test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
- STATUS_GEO_CONFIGURED |
- test_bit(STATUS_FW_ERROR, &priv->status) <<
- STATUS_FW_ERROR |
- test_bit(STATUS_EXIT_PENDING, &priv->status) <<
- STATUS_EXIT_PENDING;
-
- iwl3945_hw_txq_ctx_stop(priv);
- iwl3945_hw_rxq_stop(priv);
-
- /* Power-down device's busmaster DMA clocks */
- iwl_write_prph(priv, APMG_CLK_DIS_REG, APMG_CLK_VAL_DMA_CLK_RQT);
- udelay(5);
-
- /* Stop the device, and put it in low power state */
- iwl_apm_stop(priv);
-
- exit:
- memset(&priv->card_alive, 0, sizeof(struct iwl_alive_resp));
-
- if (priv->beacon_skb)
- dev_kfree_skb(priv->beacon_skb);
- priv->beacon_skb = NULL;
-
- /* clear out any free frames */
- iwl3945_clear_free_frames(priv);
-}
-
-static void iwl3945_down(struct iwl_priv *priv)
-{
- mutex_lock(&priv->mutex);
- __iwl3945_down(priv);
- mutex_unlock(&priv->mutex);
-
- iwl3945_cancel_deferred_work(priv);
-}
-
-#define MAX_HW_RESTARTS 5
-
-static int iwl3945_alloc_bcast_station(struct iwl_priv *priv)
-{
- struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
- unsigned long flags;
- u8 sta_id;
-
- spin_lock_irqsave(&priv->sta_lock, flags);
- sta_id = iwl_prep_station(priv, ctx, iwl_bcast_addr, false, NULL);
- if (sta_id == IWL_INVALID_STATION) {
- IWL_ERR(priv, "Unable to prepare broadcast station\n");
- spin_unlock_irqrestore(&priv->sta_lock, flags);
-
- return -EINVAL;
- }
-
- priv->stations[sta_id].used |= IWL_STA_DRIVER_ACTIVE;
- priv->stations[sta_id].used |= IWL_STA_BCAST;
- spin_unlock_irqrestore(&priv->sta_lock, flags);
-
- return 0;
-}
-
-static int __iwl3945_up(struct iwl_priv *priv)
-{
- int rc, i;
-
- rc = iwl3945_alloc_bcast_station(priv);
- if (rc)
- return rc;
-
- if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
- IWL_WARN(priv, "Exit pending; will not bring the NIC up\n");
- return -EIO;
- }
-
- if (!priv->ucode_data_backup.v_addr || !priv->ucode_data.v_addr) {
- IWL_ERR(priv, "ucode not available for device bring up\n");
- return -EIO;
- }
-
- /* If platform's RF_KILL switch is NOT set to KILL */
- if (iwl_read32(priv, CSR_GP_CNTRL) &
- CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
- clear_bit(STATUS_RF_KILL_HW, &priv->status);
- else {
- set_bit(STATUS_RF_KILL_HW, &priv->status);
- IWL_WARN(priv, "Radio disabled by HW RF Kill switch\n");
- return -ENODEV;
- }
-
- iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
-
- rc = iwl3945_hw_nic_init(priv);
- if (rc) {
- IWL_ERR(priv, "Unable to int nic\n");
- return rc;
- }
-
- /* make sure rfkill handshake bits are cleared */
- iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
- iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR,
- CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
-
- /* clear (again), then enable host interrupts */
- iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
- iwl_enable_interrupts(priv);
-
- /* really make sure rfkill handshake bits are cleared */
- iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
- iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
-
- /* Copy original ucode data image from disk into backup cache.
- * This will be used to initialize the on-board processor's
- * data SRAM for a clean start when the runtime program first loads. */
- memcpy(priv->ucode_data_backup.v_addr, priv->ucode_data.v_addr,
- priv->ucode_data.len);
-
- /* We return success when we resume from suspend and rf_kill is on. */
- if (test_bit(STATUS_RF_KILL_HW, &priv->status))
- return 0;
-
- for (i = 0; i < MAX_HW_RESTARTS; i++) {
-
- /* load bootstrap state machine,
- * load bootstrap program into processor's memory,
- * prepare to load the "initialize" uCode */
- rc = priv->cfg->ops->lib->load_ucode(priv);
-
- if (rc) {
- IWL_ERR(priv,
- "Unable to set up bootstrap uCode: %d\n", rc);
- continue;
- }
-
- /* start card; "initialize" will load runtime ucode */
- iwl3945_nic_start(priv);
-
- IWL_DEBUG_INFO(priv, DRV_NAME " is coming up\n");
-
- return 0;
- }
-
- set_bit(STATUS_EXIT_PENDING, &priv->status);
- __iwl3945_down(priv);
- clear_bit(STATUS_EXIT_PENDING, &priv->status);
-
- /* tried to restart and config the device for as long as our
- * patience could withstand */
- IWL_ERR(priv, "Unable to initialize device after %d attempts.\n", i);
- return -EIO;
-}
-
-
-/*****************************************************************************
- *
- * Workqueue callbacks
- *
- *****************************************************************************/
-
-static void iwl3945_bg_init_alive_start(struct work_struct *data)
-{
- struct iwl_priv *priv =
- container_of(data, struct iwl_priv, init_alive_start.work);
-
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
- return;
-
- mutex_lock(&priv->mutex);
- iwl3945_init_alive_start(priv);
- mutex_unlock(&priv->mutex);
-}
-
-static void iwl3945_bg_alive_start(struct work_struct *data)
-{
- struct iwl_priv *priv =
- container_of(data, struct iwl_priv, alive_start.work);
-
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
- return;
-
- mutex_lock(&priv->mutex);
- iwl3945_alive_start(priv);
- mutex_unlock(&priv->mutex);
-}
-
-/*
- * 3945 cannot interrupt driver when hardware rf kill switch toggles;
- * driver must poll CSR_GP_CNTRL_REG register for change. This register
- * *is* readable even when device has been SW_RESET into low power mode
- * (e.g. during RF KILL).
- */
-static void iwl3945_rfkill_poll(struct work_struct *data)
-{
- struct iwl_priv *priv =
- container_of(data, struct iwl_priv, _3945.rfkill_poll.work);
- bool old_rfkill = test_bit(STATUS_RF_KILL_HW, &priv->status);
- bool new_rfkill = !(iwl_read32(priv, CSR_GP_CNTRL)
- & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW);
-
- if (new_rfkill != old_rfkill) {
- if (new_rfkill)
- set_bit(STATUS_RF_KILL_HW, &priv->status);
- else
- clear_bit(STATUS_RF_KILL_HW, &priv->status);
-
- wiphy_rfkill_set_hw_state(priv->hw->wiphy, new_rfkill);
-
- IWL_DEBUG_RF_KILL(priv, "RF_KILL bit toggled to %s.\n",
- new_rfkill ? "disable radio" : "enable radio");
- }
-
- /* Keep this running, even if radio now enabled. This will be
- * cancelled in mac_start() if system decides to start again */
- queue_delayed_work(priv->workqueue, &priv->_3945.rfkill_poll,
- round_jiffies_relative(2 * HZ));
-
-}
-
-int iwl3945_request_scan(struct iwl_priv *priv, struct ieee80211_vif *vif)
-{
- struct iwl_host_cmd cmd = {
- .id = REPLY_SCAN_CMD,
- .len = sizeof(struct iwl3945_scan_cmd),
- .flags = CMD_SIZE_HUGE,
- };
- struct iwl3945_scan_cmd *scan;
- u8 n_probes = 0;
- enum ieee80211_band band;
- bool is_active = false;
- int ret;
-
- lockdep_assert_held(&priv->mutex);
-
- if (!priv->scan_cmd) {
- priv->scan_cmd = kmalloc(sizeof(struct iwl3945_scan_cmd) +
- IWL_MAX_SCAN_SIZE, GFP_KERNEL);
- if (!priv->scan_cmd) {
- IWL_DEBUG_SCAN(priv, "Fail to allocate scan memory\n");
- return -ENOMEM;
- }
- }
- scan = priv->scan_cmd;
- memset(scan, 0, sizeof(struct iwl3945_scan_cmd) + IWL_MAX_SCAN_SIZE);
-
- scan->quiet_plcp_th = IWL_PLCP_QUIET_THRESH;
- scan->quiet_time = IWL_ACTIVE_QUIET_TIME;
-
- if (iwl_is_associated(priv, IWL_RXON_CTX_BSS)) {
- u16 interval = 0;
- u32 extra;
- u32 suspend_time = 100;
- u32 scan_suspend_time = 100;
-
- IWL_DEBUG_INFO(priv, "Scanning while associated...\n");
-
- if (priv->is_internal_short_scan)
- interval = 0;
- else
- interval = vif->bss_conf.beacon_int;
-
- scan->suspend_time = 0;
- scan->max_out_time = cpu_to_le32(200 * 1024);
- if (!interval)
- interval = suspend_time;
- /*
- * suspend time format:
- * 0-19: beacon interval in usec (time before exec.)
- * 20-23: 0
- * 24-31: number of beacons (suspend between channels)
- */
-
- extra = (suspend_time / interval) << 24;
- scan_suspend_time = 0xFF0FFFFF &
- (extra | ((suspend_time % interval) * 1024));
-
- scan->suspend_time = cpu_to_le32(scan_suspend_time);
- IWL_DEBUG_SCAN(priv, "suspend_time 0x%X beacon interval %d\n",
- scan_suspend_time, interval);
- }
-
- if (priv->is_internal_short_scan) {
- IWL_DEBUG_SCAN(priv, "Start internal passive scan.\n");
- } else if (priv->scan_request->n_ssids) {
- int i, p = 0;
- IWL_DEBUG_SCAN(priv, "Kicking off active scan\n");
- for (i = 0; i < priv->scan_request->n_ssids; i++) {
- /* always does wildcard anyway */
- if (!priv->scan_request->ssids[i].ssid_len)
- continue;
- scan->direct_scan[p].id = WLAN_EID_SSID;
- scan->direct_scan[p].len =
- priv->scan_request->ssids[i].ssid_len;
- memcpy(scan->direct_scan[p].ssid,
- priv->scan_request->ssids[i].ssid,
- priv->scan_request->ssids[i].ssid_len);
- n_probes++;
- p++;
- }
- is_active = true;
- } else
- IWL_DEBUG_SCAN(priv, "Kicking off passive scan.\n");
-
- /* We don't build a direct scan probe request; the uCode will do
- * that based on the direct_mask added to each channel entry */
- scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK;
- scan->tx_cmd.sta_id = priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id;
- scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
-
- /* flags + rate selection */
-
- switch (priv->scan_band) {
- case IEEE80211_BAND_2GHZ:
- scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
- scan->tx_cmd.rate = IWL_RATE_1M_PLCP;
- band = IEEE80211_BAND_2GHZ;
- break;
- case IEEE80211_BAND_5GHZ:
- scan->tx_cmd.rate = IWL_RATE_6M_PLCP;
- band = IEEE80211_BAND_5GHZ;
- break;
- default:
- IWL_WARN(priv, "Invalid scan band\n");
- return -EIO;
- }
-
- /*
- * If active scaning is requested but a certain channel
- * is marked passive, we can do active scanning if we
- * detect transmissions.
- */
- scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH_DEFAULT :
- IWL_GOOD_CRC_TH_DISABLED;
-
- if (!priv->is_internal_short_scan) {
- scan->tx_cmd.len = cpu_to_le16(
- iwl_fill_probe_req(priv,
- (struct ieee80211_mgmt *)scan->data,
- vif->addr,
- priv->scan_request->ie,
- priv->scan_request->ie_len,
- IWL_MAX_SCAN_SIZE - sizeof(*scan)));
- } else {
- /* use bcast addr, will not be transmitted but must be valid */
- scan->tx_cmd.len = cpu_to_le16(
- iwl_fill_probe_req(priv,
- (struct ieee80211_mgmt *)scan->data,
- iwl_bcast_addr, NULL, 0,
- IWL_MAX_SCAN_SIZE - sizeof(*scan)));
- }
- /* select Rx antennas */
- scan->flags |= iwl3945_get_antenna_flags(priv);
-
- if (priv->is_internal_short_scan) {
- scan->channel_count =
- iwl3945_get_single_channel_for_scan(priv, vif, band,
- (void *)&scan->data[le16_to_cpu(
- scan->tx_cmd.len)]);
- } else {
- scan->channel_count =
- iwl3945_get_channels_for_scan(priv, band, is_active, n_probes,
- (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)], vif);
- }
-
- if (scan->channel_count == 0) {
- IWL_DEBUG_SCAN(priv, "channel count %d\n", scan->channel_count);
- return -EIO;
- }
-
- cmd.len += le16_to_cpu(scan->tx_cmd.len) +
- scan->channel_count * sizeof(struct iwl3945_scan_channel);
- cmd.data = scan;
- scan->len = cpu_to_le16(cmd.len);
-
- set_bit(STATUS_SCAN_HW, &priv->status);
- ret = iwl_send_cmd_sync(priv, &cmd);
- if (ret)
- clear_bit(STATUS_SCAN_HW, &priv->status);
- return ret;
-}
-
-void iwl3945_post_scan(struct iwl_priv *priv)
-{
- struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
-
- /*
- * Since setting the RXON may have been deferred while
- * performing the scan, fire one off if needed
- */
- if (memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging)))
- iwl3945_commit_rxon(priv, ctx);
-}
-
-static void iwl3945_bg_restart(struct work_struct *data)
-{
- struct iwl_priv *priv = container_of(data, struct iwl_priv, restart);
-
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
- return;
-
- if (test_and_clear_bit(STATUS_FW_ERROR, &priv->status)) {
- struct iwl_rxon_context *ctx;
- mutex_lock(&priv->mutex);
- for_each_context(priv, ctx)
- ctx->vif = NULL;
- priv->is_open = 0;
- mutex_unlock(&priv->mutex);
- iwl3945_down(priv);
- ieee80211_restart_hw(priv->hw);
- } else {
- iwl3945_down(priv);
-
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
- return;
-
- mutex_lock(&priv->mutex);
- __iwl3945_up(priv);
- mutex_unlock(&priv->mutex);
- }
-}
-
-static void iwl3945_bg_rx_replenish(struct work_struct *data)
-{
- struct iwl_priv *priv =
- container_of(data, struct iwl_priv, rx_replenish);
-
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
- return;
-
- mutex_lock(&priv->mutex);
- iwl3945_rx_replenish(priv);
- mutex_unlock(&priv->mutex);
-}
-
-void iwl3945_post_associate(struct iwl_priv *priv)
-{
- int rc = 0;
- struct ieee80211_conf *conf = NULL;
- struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
-
- if (!ctx->vif || !priv->is_open)
- return;
-
- if (ctx->vif->type == NL80211_IFTYPE_AP) {
- IWL_ERR(priv, "%s Should not be called in AP mode\n", __func__);
- return;
- }
-
- IWL_DEBUG_ASSOC(priv, "Associated as %d to: %pM\n",
- ctx->vif->bss_conf.aid, ctx->active.bssid_addr);
-
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
- return;
-
- iwl_scan_cancel_timeout(priv, 200);
-
- conf = ieee80211_get_hw_conf(priv->hw);
-
- ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
- iwl3945_commit_rxon(priv, ctx);
-
- rc = iwl_send_rxon_timing(priv, ctx);
- if (rc)
- IWL_WARN(priv, "REPLY_RXON_TIMING failed - "
- "Attempting to continue.\n");
-
- ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
-
- ctx->staging.assoc_id = cpu_to_le16(ctx->vif->bss_conf.aid);
-
- IWL_DEBUG_ASSOC(priv, "assoc id %d beacon interval %d\n",
- ctx->vif->bss_conf.aid, ctx->vif->bss_conf.beacon_int);
-
- if (ctx->vif->bss_conf.use_short_preamble)
- ctx->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
- else
- ctx->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
-
- if (ctx->staging.flags & RXON_FLG_BAND_24G_MSK) {
- if (ctx->vif->bss_conf.use_short_slot)
- ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
- else
- ctx->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
- }
-
- iwl3945_commit_rxon(priv, ctx);
-
- switch (ctx->vif->type) {
- case NL80211_IFTYPE_STATION:
- iwl3945_rate_scale_init(priv->hw, IWL_AP_ID);
- break;
- case NL80211_IFTYPE_ADHOC:
- iwl3945_send_beacon_cmd(priv);
- break;
- default:
- IWL_ERR(priv, "%s Should not be called in %d mode\n",
- __func__, ctx->vif->type);
- break;
- }
-}
-
-/*****************************************************************************
- *
- * mac80211 entry point functions
- *
- *****************************************************************************/
-
-#define UCODE_READY_TIMEOUT (2 * HZ)
-
-static int iwl3945_mac_start(struct ieee80211_hw *hw)
-{
- struct iwl_priv *priv = hw->priv;
- int ret;
-
- IWL_DEBUG_MAC80211(priv, "enter\n");
-
- /* we should be verifying the device is ready to be opened */
- mutex_lock(&priv->mutex);
-
- /* fetch ucode file from disk, alloc and copy to bus-master buffers ...
- * ucode filename and max sizes are card-specific. */
-
- if (!priv->ucode_code.len) {
- ret = iwl3945_read_ucode(priv);
- if (ret) {
- IWL_ERR(priv, "Could not read microcode: %d\n", ret);
- mutex_unlock(&priv->mutex);
- goto out_release_irq;
- }
- }
-
- ret = __iwl3945_up(priv);
-
- mutex_unlock(&priv->mutex);
-
- if (ret)
- goto out_release_irq;
-
- IWL_DEBUG_INFO(priv, "Start UP work.\n");
-
- /* Wait for START_ALIVE from ucode. Otherwise callbacks from
- * mac80211 will not be run successfully. */
- ret = wait_event_interruptible_timeout(priv->wait_command_queue,
- test_bit(STATUS_READY, &priv->status),
- UCODE_READY_TIMEOUT);
- if (!ret) {
- if (!test_bit(STATUS_READY, &priv->status)) {
- IWL_ERR(priv,
- "Wait for START_ALIVE timeout after %dms.\n",
- jiffies_to_msecs(UCODE_READY_TIMEOUT));
- ret = -ETIMEDOUT;
- goto out_release_irq;
- }
- }
-
- /* ucode is running and will send rfkill notifications,
- * no need to poll the killswitch state anymore */
- cancel_delayed_work(&priv->_3945.rfkill_poll);
-
- priv->is_open = 1;
- IWL_DEBUG_MAC80211(priv, "leave\n");
- return 0;
-
-out_release_irq:
- priv->is_open = 0;
- IWL_DEBUG_MAC80211(priv, "leave - failed\n");
- return ret;
-}
-
-static void iwl3945_mac_stop(struct ieee80211_hw *hw)
-{
- struct iwl_priv *priv = hw->priv;
-
- IWL_DEBUG_MAC80211(priv, "enter\n");
-
- if (!priv->is_open) {
- IWL_DEBUG_MAC80211(priv, "leave - skip\n");
- return;
- }
-
- priv->is_open = 0;
-
- iwl3945_down(priv);
-
- flush_workqueue(priv->workqueue);
-
- /* start polling the killswitch state again */
- queue_delayed_work(priv->workqueue, &priv->_3945.rfkill_poll,
- round_jiffies_relative(2 * HZ));
-
- IWL_DEBUG_MAC80211(priv, "leave\n");
-}
-
-static int iwl3945_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
-{
- struct iwl_priv *priv = hw->priv;
-
- IWL_DEBUG_MAC80211(priv, "enter\n");
-
- IWL_DEBUG_TX(priv, "dev->xmit(%d bytes) at rate 0x%02x\n", skb->len,
- ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate);
-
- if (iwl3945_tx_skb(priv, skb))
- dev_kfree_skb_any(skb);
-
- IWL_DEBUG_MAC80211(priv, "leave\n");
- return NETDEV_TX_OK;
-}
-
-void iwl3945_config_ap(struct iwl_priv *priv)
-{
- struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
- struct ieee80211_vif *vif = ctx->vif;
- int rc = 0;
-
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
- return;
-
- /* The following should be done only at AP bring up */
- if (!(iwl_is_associated(priv, IWL_RXON_CTX_BSS))) {
-
- /* RXON - unassoc (to set timing command) */
- ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
- iwl3945_commit_rxon(priv, ctx);
-
- /* RXON Timing */
- rc = iwl_send_rxon_timing(priv, ctx);
- if (rc)
- IWL_WARN(priv, "REPLY_RXON_TIMING failed - "
- "Attempting to continue.\n");
-
- ctx->staging.assoc_id = 0;
-
- if (vif->bss_conf.use_short_preamble)
- ctx->staging.flags |=
- RXON_FLG_SHORT_PREAMBLE_MSK;
- else
- ctx->staging.flags &=
- ~RXON_FLG_SHORT_PREAMBLE_MSK;
-
- if (ctx->staging.flags & RXON_FLG_BAND_24G_MSK) {
- if (vif->bss_conf.use_short_slot)
- ctx->staging.flags |=
- RXON_FLG_SHORT_SLOT_MSK;
- else
- ctx->staging.flags &=
- ~RXON_FLG_SHORT_SLOT_MSK;
- }
- /* restore RXON assoc */
- ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
- iwl3945_commit_rxon(priv, ctx);
- }
- iwl3945_send_beacon_cmd(priv);
-
- /* FIXME - we need to add code here to detect a totally new
- * configuration, reset the AP, unassoc, rxon timing, assoc,
- * clear sta table, add BCAST sta... */
-}
-
-static int iwl3945_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
- struct ieee80211_vif *vif,
- struct ieee80211_sta *sta,
- struct ieee80211_key_conf *key)
-{
- struct iwl_priv *priv = hw->priv;
- int ret = 0;
- u8 sta_id = IWL_INVALID_STATION;
- u8 static_key;
-
- IWL_DEBUG_MAC80211(priv, "enter\n");
-
- if (iwl3945_mod_params.sw_crypto) {
- IWL_DEBUG_MAC80211(priv, "leave - hwcrypto disabled\n");
- return -EOPNOTSUPP;
- }
-
- /*
- * To support IBSS RSN, don't program group keys in IBSS, the
- * hardware will then not attempt to decrypt the frames.
- */
- if (vif->type == NL80211_IFTYPE_ADHOC &&
- !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE))
- return -EOPNOTSUPP;
-
- static_key = !iwl_is_associated(priv, IWL_RXON_CTX_BSS);
-
- if (!static_key) {
- sta_id = iwl_sta_id_or_broadcast(
- priv, &priv->contexts[IWL_RXON_CTX_BSS], sta);
- if (sta_id == IWL_INVALID_STATION)
- return -EINVAL;
- }
-
- mutex_lock(&priv->mutex);
- iwl_scan_cancel_timeout(priv, 100);
-
- switch (cmd) {
- case SET_KEY:
- if (static_key)
- ret = iwl3945_set_static_key(priv, key);
- else
- ret = iwl3945_set_dynamic_key(priv, key, sta_id);
- IWL_DEBUG_MAC80211(priv, "enable hwcrypto key\n");
- break;
- case DISABLE_KEY:
- if (static_key)
- ret = iwl3945_remove_static_key(priv);
- else
- ret = iwl3945_clear_sta_key_info(priv, sta_id);
- IWL_DEBUG_MAC80211(priv, "disable hwcrypto key\n");
- break;
- default:
- ret = -EINVAL;
- }
-
- mutex_unlock(&priv->mutex);
- IWL_DEBUG_MAC80211(priv, "leave\n");
-
- return ret;
-}
-
-static int iwl3945_mac_sta_add(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct ieee80211_sta *sta)
-{
- struct iwl_priv *priv = hw->priv;
- struct iwl3945_sta_priv *sta_priv = (void *)sta->drv_priv;
- int ret;
- bool is_ap = vif->type == NL80211_IFTYPE_STATION;
- u8 sta_id;
-
- IWL_DEBUG_INFO(priv, "received request to add station %pM\n",
- sta->addr);
- mutex_lock(&priv->mutex);
- IWL_DEBUG_INFO(priv, "proceeding to add station %pM\n",
- sta->addr);
- sta_priv->common.sta_id = IWL_INVALID_STATION;
-
-
- ret = iwl_add_station_common(priv, &priv->contexts[IWL_RXON_CTX_BSS],
- sta->addr, is_ap, sta, &sta_id);
- if (ret) {
- IWL_ERR(priv, "Unable to add station %pM (%d)\n",
- sta->addr, ret);
- /* Should we return success if return code is EEXIST ? */
- mutex_unlock(&priv->mutex);
- return ret;
- }
-
- sta_priv->common.sta_id = sta_id;
-
- /* Initialize rate scaling */
- IWL_DEBUG_INFO(priv, "Initializing rate scaling for station %pM\n",
- sta->addr);
- iwl3945_rs_rate_init(priv, sta, sta_id);
- mutex_unlock(&priv->mutex);
-
- return 0;
-}
-
-static void iwl3945_configure_filter(struct ieee80211_hw *hw,
- unsigned int changed_flags,
- unsigned int *total_flags,
- u64 multicast)
-{
- struct iwl_priv *priv = hw->priv;
- __le32 filter_or = 0, filter_nand = 0;
- struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
-
-#define CHK(test, flag) do { \
- if (*total_flags & (test)) \
- filter_or |= (flag); \
- else \
- filter_nand |= (flag); \
- } while (0)
-
- IWL_DEBUG_MAC80211(priv, "Enter: changed: 0x%x, total: 0x%x\n",
- changed_flags, *total_flags);
-
- CHK(FIF_OTHER_BSS | FIF_PROMISC_IN_BSS, RXON_FILTER_PROMISC_MSK);
- CHK(FIF_CONTROL, RXON_FILTER_CTL2HOST_MSK);
- CHK(FIF_BCN_PRBRESP_PROMISC, RXON_FILTER_BCON_AWARE_MSK);
-
-#undef CHK
-
- mutex_lock(&priv->mutex);
-
- ctx->staging.filter_flags &= ~filter_nand;
- ctx->staging.filter_flags |= filter_or;
-
- /*
- * Not committing directly because hardware can perform a scan,
- * but even if hw is ready, committing here breaks for some reason,
- * we'll eventually commit the filter flags change anyway.
- */
-
- mutex_unlock(&priv->mutex);
-
- /*
- * Receiving all multicast frames is always enabled by the
- * default flags setup in iwl_connection_init_rx_config()
- * since we currently do not support programming multicast
- * filters into the device.
- */
- *total_flags &= FIF_OTHER_BSS | FIF_ALLMULTI | FIF_PROMISC_IN_BSS |
- FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL;
-}
-
-
-/*****************************************************************************
- *
- * sysfs attributes
- *
- *****************************************************************************/
-
-#ifdef CONFIG_IWLWIFI_DEBUG
-
-/*
- * The following adds a new attribute to the sysfs representation
- * of this device driver (i.e. a new file in /sys/bus/pci/drivers/iwl/)
- * used for controlling the debug level.
- *
- * See the level definitions in iwl for details.
- *
- * The debug_level being managed using sysfs below is a per device debug
- * level that is used instead of the global debug level if it (the per
- * device debug level) is set.
- */
-static ssize_t show_debug_level(struct device *d,
- struct device_attribute *attr, char *buf)
-{
- struct iwl_priv *priv = dev_get_drvdata(d);
- return sprintf(buf, "0x%08X\n", iwl_get_debug_level(priv));
-}
-static ssize_t store_debug_level(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct iwl_priv *priv = dev_get_drvdata(d);
- unsigned long val;
- int ret;
-
- ret = strict_strtoul(buf, 0, &val);
- if (ret)
- IWL_INFO(priv, "%s is not in hex or decimal form.\n", buf);
- else {
- priv->debug_level = val;
- if (iwl_alloc_traffic_mem(priv))
- IWL_ERR(priv,
- "Not enough memory to generate traffic log\n");
- }
- return strnlen(buf, count);
-}
-
-static DEVICE_ATTR(debug_level, S_IWUSR | S_IRUGO,
- show_debug_level, store_debug_level);
-
-#endif /* CONFIG_IWLWIFI_DEBUG */
-
-static ssize_t show_temperature(struct device *d,
- struct device_attribute *attr, char *buf)
-{
- struct iwl_priv *priv = dev_get_drvdata(d);
-
- if (!iwl_is_alive(priv))
- return -EAGAIN;
-
- return sprintf(buf, "%d\n", iwl3945_hw_get_temperature(priv));
-}
-
-static DEVICE_ATTR(temperature, S_IRUGO, show_temperature, NULL);
-
-static ssize_t show_tx_power(struct device *d,
- struct device_attribute *attr, char *buf)
-{
- struct iwl_priv *priv = dev_get_drvdata(d);
- return sprintf(buf, "%d\n", priv->tx_power_user_lmt);
-}
-
-static ssize_t store_tx_power(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct iwl_priv *priv = dev_get_drvdata(d);
- char *p = (char *)buf;
- u32 val;
-
- val = simple_strtoul(p, &p, 10);
- if (p == buf)
- IWL_INFO(priv, ": %s is not in decimal form.\n", buf);
- else
- iwl3945_hw_reg_set_txpower(priv, val);
-
- return count;
-}
-
-static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, show_tx_power, store_tx_power);
-
-static ssize_t show_flags(struct device *d,
- struct device_attribute *attr, char *buf)
-{
- struct iwl_priv *priv = dev_get_drvdata(d);
- struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
-
- return sprintf(buf, "0x%04X\n", ctx->active.flags);
-}
-
-static ssize_t store_flags(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct iwl_priv *priv = dev_get_drvdata(d);
- u32 flags = simple_strtoul(buf, NULL, 0);
- struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
-
- mutex_lock(&priv->mutex);
- if (le32_to_cpu(ctx->staging.flags) != flags) {
- /* Cancel any currently running scans... */
- if (iwl_scan_cancel_timeout(priv, 100))
- IWL_WARN(priv, "Could not cancel scan.\n");
- else {
- IWL_DEBUG_INFO(priv, "Committing rxon.flags = 0x%04X\n",
- flags);
- ctx->staging.flags = cpu_to_le32(flags);
- iwl3945_commit_rxon(priv, ctx);
- }
- }
- mutex_unlock(&priv->mutex);
-
- return count;
-}
-
-static DEVICE_ATTR(flags, S_IWUSR | S_IRUGO, show_flags, store_flags);
-
-static ssize_t show_filter_flags(struct device *d,
- struct device_attribute *attr, char *buf)
-{
- struct iwl_priv *priv = dev_get_drvdata(d);
- struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
-
- return sprintf(buf, "0x%04X\n",
- le32_to_cpu(ctx->active.filter_flags));
-}
-
-static ssize_t store_filter_flags(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct iwl_priv *priv = dev_get_drvdata(d);
- struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
- u32 filter_flags = simple_strtoul(buf, NULL, 0);
-
- mutex_lock(&priv->mutex);
- if (le32_to_cpu(ctx->staging.filter_flags) != filter_flags) {
- /* Cancel any currently running scans... */
- if (iwl_scan_cancel_timeout(priv, 100))
- IWL_WARN(priv, "Could not cancel scan.\n");
- else {
- IWL_DEBUG_INFO(priv, "Committing rxon.filter_flags = "
- "0x%04X\n", filter_flags);
- ctx->staging.filter_flags =
- cpu_to_le32(filter_flags);
- iwl3945_commit_rxon(priv, ctx);
- }
- }
- mutex_unlock(&priv->mutex);
-
- return count;
-}
-
-static DEVICE_ATTR(filter_flags, S_IWUSR | S_IRUGO, show_filter_flags,
- store_filter_flags);
-
-static ssize_t show_measurement(struct device *d,
- struct device_attribute *attr, char *buf)
-{
- struct iwl_priv *priv = dev_get_drvdata(d);
- struct iwl_spectrum_notification measure_report;
- u32 size = sizeof(measure_report), len = 0, ofs = 0;
- u8 *data = (u8 *)&measure_report;
- unsigned long flags;
-
- spin_lock_irqsave(&priv->lock, flags);
- if (!(priv->measurement_status & MEASUREMENT_READY)) {
- spin_unlock_irqrestore(&priv->lock, flags);
- return 0;
- }
- memcpy(&measure_report, &priv->measure_report, size);
- priv->measurement_status = 0;
- spin_unlock_irqrestore(&priv->lock, flags);
-
- while (size && (PAGE_SIZE - len)) {
- hex_dump_to_buffer(data + ofs, size, 16, 1, buf + len,
- PAGE_SIZE - len, 1);
- len = strlen(buf);
- if (PAGE_SIZE - len)
- buf[len++] = '\n';
-
- ofs += 16;
- size -= min(size, 16U);
- }
-
- return len;
-}
-
-static ssize_t store_measurement(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct iwl_priv *priv = dev_get_drvdata(d);
- struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
- struct ieee80211_measurement_params params = {
- .channel = le16_to_cpu(ctx->active.channel),
- .start_time = cpu_to_le64(priv->_3945.last_tsf),
- .duration = cpu_to_le16(1),
- };
- u8 type = IWL_MEASURE_BASIC;
- u8 buffer[32];
- u8 channel;
-
- if (count) {
- char *p = buffer;
- strncpy(buffer, buf, min(sizeof(buffer), count));
- channel = simple_strtoul(p, NULL, 0);
- if (channel)
- params.channel = channel;
-
- p = buffer;
- while (*p && *p != ' ')
- p++;
- if (*p)
- type = simple_strtoul(p + 1, NULL, 0);
- }
-
- IWL_DEBUG_INFO(priv, "Invoking measurement of type %d on "
- "channel %d (for '%s')\n", type, params.channel, buf);
- iwl3945_get_measurement(priv, ¶ms, type);
-
- return count;
-}
-
-static DEVICE_ATTR(measurement, S_IRUSR | S_IWUSR,
- show_measurement, store_measurement);
-
-static ssize_t store_retry_rate(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct iwl_priv *priv = dev_get_drvdata(d);
-
- priv->retry_rate = simple_strtoul(buf, NULL, 0);
- if (priv->retry_rate <= 0)
- priv->retry_rate = 1;
-
- return count;
-}
-
-static ssize_t show_retry_rate(struct device *d,
- struct device_attribute *attr, char *buf)
-{
- struct iwl_priv *priv = dev_get_drvdata(d);
- return sprintf(buf, "%d", priv->retry_rate);
-}
-
-static DEVICE_ATTR(retry_rate, S_IWUSR | S_IRUSR, show_retry_rate,
- store_retry_rate);
-
-
-static ssize_t show_channels(struct device *d,
- struct device_attribute *attr, char *buf)
-{
- /* all this shit doesn't belong into sysfs anyway */
- return 0;
-}
-
-static DEVICE_ATTR(channels, S_IRUSR, show_channels, NULL);
-
-static ssize_t show_antenna(struct device *d,
- struct device_attribute *attr, char *buf)
-{
- struct iwl_priv *priv = dev_get_drvdata(d);
-
- if (!iwl_is_alive(priv))
- return -EAGAIN;
-
- return sprintf(buf, "%d\n", iwl3945_mod_params.antenna);
-}
-
-static ssize_t store_antenna(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct iwl_priv *priv __maybe_unused = dev_get_drvdata(d);
- int ant;
-
- if (count == 0)
- return 0;
-
- if (sscanf(buf, "%1i", &ant) != 1) {
- IWL_DEBUG_INFO(priv, "not in hex or decimal form.\n");
- return count;
- }
-
- if ((ant >= 0) && (ant <= 2)) {
- IWL_DEBUG_INFO(priv, "Setting antenna select to %d.\n", ant);
- iwl3945_mod_params.antenna = (enum iwl3945_antenna)ant;
- } else
- IWL_DEBUG_INFO(priv, "Bad antenna select value %d.\n", ant);
-
-
- return count;
-}
-
-static DEVICE_ATTR(antenna, S_IWUSR | S_IRUGO, show_antenna, store_antenna);
-
-static ssize_t show_status(struct device *d,
- struct device_attribute *attr, char *buf)
-{
- struct iwl_priv *priv = dev_get_drvdata(d);
- if (!iwl_is_alive(priv))
- return -EAGAIN;
- return sprintf(buf, "0x%08x\n", (int)priv->status);
-}
-
-static DEVICE_ATTR(status, S_IRUGO, show_status, NULL);
-
-static ssize_t dump_error_log(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct iwl_priv *priv = dev_get_drvdata(d);
- char *p = (char *)buf;
-
- if (p[0] == '1')
- iwl3945_dump_nic_error_log(priv);
-
- return strnlen(buf, count);
-}
-
-static DEVICE_ATTR(dump_errors, S_IWUSR, NULL, dump_error_log);
-
-/*****************************************************************************
- *
- * driver setup and tear down
- *
- *****************************************************************************/
-
-static void iwl3945_setup_deferred_work(struct iwl_priv *priv)
-{
- priv->workqueue = create_singlethread_workqueue(DRV_NAME);
-
- init_waitqueue_head(&priv->wait_command_queue);
-
- INIT_WORK(&priv->restart, iwl3945_bg_restart);
- INIT_WORK(&priv->rx_replenish, iwl3945_bg_rx_replenish);
- INIT_WORK(&priv->beacon_update, iwl3945_bg_beacon_update);
- INIT_DELAYED_WORK(&priv->init_alive_start, iwl3945_bg_init_alive_start);
- INIT_DELAYED_WORK(&priv->alive_start, iwl3945_bg_alive_start);
- INIT_DELAYED_WORK(&priv->_3945.rfkill_poll, iwl3945_rfkill_poll);
-
- iwl_setup_scan_deferred_work(priv);
-
- iwl3945_hw_setup_deferred_work(priv);
-
- init_timer(&priv->watchdog);
- priv->watchdog.data = (unsigned long)priv;
- priv->watchdog.function = iwl_bg_watchdog;
-
- tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
- iwl3945_irq_tasklet, (unsigned long)priv);
-}
-
-static void iwl3945_cancel_deferred_work(struct iwl_priv *priv)
-{
- iwl3945_hw_cancel_deferred_work(priv);
-
- cancel_delayed_work_sync(&priv->init_alive_start);
- cancel_delayed_work(&priv->alive_start);
- cancel_work_sync(&priv->beacon_update);
-
- iwl_cancel_scan_deferred_work(priv);
-}
-
-static struct attribute *iwl3945_sysfs_entries[] = {
- &dev_attr_antenna.attr,
- &dev_attr_channels.attr,
- &dev_attr_dump_errors.attr,
- &dev_attr_flags.attr,
- &dev_attr_filter_flags.attr,
- &dev_attr_measurement.attr,
- &dev_attr_retry_rate.attr,
- &dev_attr_status.attr,
- &dev_attr_temperature.attr,
- &dev_attr_tx_power.attr,
-#ifdef CONFIG_IWLWIFI_DEBUG
- &dev_attr_debug_level.attr,
-#endif
- NULL
-};
-
-static struct attribute_group iwl3945_attribute_group = {
- .name = NULL, /* put in device directory */
- .attrs = iwl3945_sysfs_entries,
-};
-
-struct ieee80211_ops iwl3945_hw_ops = {
- .tx = iwl3945_mac_tx,
- .start = iwl3945_mac_start,
- .stop = iwl3945_mac_stop,
- .add_interface = iwl_mac_add_interface,
- .remove_interface = iwl_mac_remove_interface,
- .change_interface = iwl_mac_change_interface,
- .config = iwl_legacy_mac_config,
- .configure_filter = iwl3945_configure_filter,
- .set_key = iwl3945_mac_set_key,
- .conf_tx = iwl_mac_conf_tx,
- .reset_tsf = iwl_legacy_mac_reset_tsf,
- .bss_info_changed = iwl_legacy_mac_bss_info_changed,
- .hw_scan = iwl_mac_hw_scan,
- .sta_add = iwl3945_mac_sta_add,
- .sta_remove = iwl_mac_sta_remove,
- .tx_last_beacon = iwl_mac_tx_last_beacon,
-};
-
-static int iwl3945_init_drv(struct iwl_priv *priv)
-{
- int ret;
- struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom;
-
- priv->retry_rate = 1;
- priv->beacon_skb = NULL;
-
- spin_lock_init(&priv->sta_lock);
- spin_lock_init(&priv->hcmd_lock);
-
- INIT_LIST_HEAD(&priv->free_frames);
-
- mutex_init(&priv->mutex);
- mutex_init(&priv->sync_cmd_mutex);
-
- priv->ieee_channels = NULL;
- priv->ieee_rates = NULL;
- priv->band = IEEE80211_BAND_2GHZ;
-
- priv->iw_mode = NL80211_IFTYPE_STATION;
- priv->missed_beacon_threshold = IWL_MISSED_BEACON_THRESHOLD_DEF;
-
- /* initialize force reset */
- priv->force_reset[IWL_RF_RESET].reset_duration =
- IWL_DELAY_NEXT_FORCE_RF_RESET;
- priv->force_reset[IWL_FW_RESET].reset_duration =
- IWL_DELAY_NEXT_FORCE_FW_RELOAD;
-
-
- priv->tx_power_user_lmt = IWL_DEFAULT_TX_POWER;
- priv->tx_power_next = IWL_DEFAULT_TX_POWER;
-
- if (eeprom->version < EEPROM_3945_EEPROM_VERSION) {
- IWL_WARN(priv, "Unsupported EEPROM version: 0x%04X\n",
- eeprom->version);
- ret = -EINVAL;
- goto err;
- }
- ret = iwl_init_channel_map(priv);
- if (ret) {
- IWL_ERR(priv, "initializing regulatory failed: %d\n", ret);
- goto err;
- }
-
- /* Set up txpower settings in driver for all channels */
- if (iwl3945_txpower_set_from_eeprom(priv)) {
- ret = -EIO;
- goto err_free_channel_map;
- }
-
- ret = iwlcore_init_geos(priv);
- if (ret) {
- IWL_ERR(priv, "initializing geos failed: %d\n", ret);
- goto err_free_channel_map;
- }
- iwl3945_init_hw_rates(priv, priv->ieee_rates);
-
- return 0;
-
-err_free_channel_map:
- iwl_free_channel_map(priv);
-err:
- return ret;
-}
-
-#define IWL3945_MAX_PROBE_REQUEST 200
-
-static int iwl3945_setup_mac(struct iwl_priv *priv)
-{
- int ret;
- struct ieee80211_hw *hw = priv->hw;
-
- hw->rate_control_algorithm = "iwl-3945-rs";
- hw->sta_data_size = sizeof(struct iwl3945_sta_priv);
- hw->vif_data_size = sizeof(struct iwl_vif_priv);
-
- /* Tell mac80211 our characteristics */
- hw->flags = IEEE80211_HW_SIGNAL_DBM |
- IEEE80211_HW_SPECTRUM_MGMT;
-
- if (!priv->cfg->base_params->broken_powersave)
- hw->flags |= IEEE80211_HW_SUPPORTS_PS |
- IEEE80211_HW_SUPPORTS_DYNAMIC_PS;
-
- hw->wiphy->interface_modes =
- priv->contexts[IWL_RXON_CTX_BSS].interface_modes;
-
- hw->wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY |
- WIPHY_FLAG_DISABLE_BEACON_HINTS |
- WIPHY_FLAG_IBSS_RSN;
-
- hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX_3945;
- /* we create the 802.11 header and a zero-length SSID element */
- hw->wiphy->max_scan_ie_len = IWL3945_MAX_PROBE_REQUEST - 24 - 2;
-
- /* Default value; 4 EDCA QOS priorities */
- hw->queues = 4;
-
- if (priv->bands[IEEE80211_BAND_2GHZ].n_channels)
- priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
- &priv->bands[IEEE80211_BAND_2GHZ];
-
- if (priv->bands[IEEE80211_BAND_5GHZ].n_channels)
- priv->hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
- &priv->bands[IEEE80211_BAND_5GHZ];
-
- iwl_leds_init(priv);
-
- ret = ieee80211_register_hw(priv->hw);
- if (ret) {
- IWL_ERR(priv, "Failed to register hw (error %d)\n", ret);
- return ret;
- }
- priv->mac80211_registered = 1;
-
- return 0;
-}
-
-static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
-{
- int err = 0, i;
- struct iwl_priv *priv;
- struct ieee80211_hw *hw;
- struct iwl_cfg *cfg = (struct iwl_cfg *)(ent->driver_data);
- struct iwl3945_eeprom *eeprom;
- unsigned long flags;
-
- /***********************
- * 1. Allocating HW data
- * ********************/
-
- /* mac80211 allocates memory for this device instance, including
- * space for this driver's private structure */
- hw = iwl_alloc_all(cfg);
- if (hw == NULL) {
- pr_err("Can not allocate network device\n");
- err = -ENOMEM;
- goto out;
- }
- priv = hw->priv;
- SET_IEEE80211_DEV(hw, &pdev->dev);
-
- priv->cmd_queue = IWL39_CMD_QUEUE_NUM;
-
- /* 3945 has only one valid context */
- priv->valid_contexts = BIT(IWL_RXON_CTX_BSS);
-
- for (i = 0; i < NUM_IWL_RXON_CTX; i++)
- priv->contexts[i].ctxid = i;
-
- priv->contexts[IWL_RXON_CTX_BSS].rxon_cmd = REPLY_RXON;
- priv->contexts[IWL_RXON_CTX_BSS].rxon_timing_cmd = REPLY_RXON_TIMING;
- priv->contexts[IWL_RXON_CTX_BSS].rxon_assoc_cmd = REPLY_RXON_ASSOC;
- priv->contexts[IWL_RXON_CTX_BSS].qos_cmd = REPLY_QOS_PARAM;
- priv->contexts[IWL_RXON_CTX_BSS].ap_sta_id = IWL_AP_ID;
- priv->contexts[IWL_RXON_CTX_BSS].wep_key_cmd = REPLY_WEPKEY;
- priv->contexts[IWL_RXON_CTX_BSS].interface_modes =
- BIT(NL80211_IFTYPE_STATION) |
- BIT(NL80211_IFTYPE_ADHOC);
- priv->contexts[IWL_RXON_CTX_BSS].ibss_devtype = RXON_DEV_TYPE_IBSS;
- priv->contexts[IWL_RXON_CTX_BSS].station_devtype = RXON_DEV_TYPE_ESS;
- priv->contexts[IWL_RXON_CTX_BSS].unused_devtype = RXON_DEV_TYPE_ESS;
-
- /*
- * Disabling hardware scan means that mac80211 will perform scans
- * "the hard way", rather than using device's scan.
- */
- if (iwl3945_mod_params.disable_hw_scan) {
- dev_printk(KERN_DEBUG, &(pdev->dev),
- "sw scan support is deprecated\n");
- iwl3945_hw_ops.hw_scan = NULL;
- }
-
-
- IWL_DEBUG_INFO(priv, "*** LOAD DRIVER ***\n");
- priv->cfg = cfg;
- priv->pci_dev = pdev;
- priv->inta_mask = CSR_INI_SET_MASK;
-
- if (iwl_alloc_traffic_mem(priv))
- IWL_ERR(priv, "Not enough memory to generate traffic log\n");
-
- /***************************
- * 2. Initializing PCI bus
- * *************************/
- pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 |
- PCIE_LINK_STATE_CLKPM);
-
- if (pci_enable_device(pdev)) {
- err = -ENODEV;
- goto out_ieee80211_free_hw;
- }
-
- pci_set_master(pdev);
-
- err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
- if (!err)
- err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
- if (err) {
- IWL_WARN(priv, "No suitable DMA available.\n");
- goto out_pci_disable_device;
- }
-
- pci_set_drvdata(pdev, priv);
- err = pci_request_regions(pdev, DRV_NAME);
- if (err)
- goto out_pci_disable_device;
-
- /***********************
- * 3. Read REV Register
- * ********************/
- priv->hw_base = pci_iomap(pdev, 0, 0);
- if (!priv->hw_base) {
- err = -ENODEV;
- goto out_pci_release_regions;
- }
-
- IWL_DEBUG_INFO(priv, "pci_resource_len = 0x%08llx\n",
- (unsigned long long) pci_resource_len(pdev, 0));
- IWL_DEBUG_INFO(priv, "pci_resource_base = %p\n", priv->hw_base);
-
- /* We disable the RETRY_TIMEOUT register (0x41) to keep
- * PCI Tx retries from interfering with C3 CPU state */
- pci_write_config_byte(pdev, 0x41, 0x00);
-
- /* these spin locks will be used in apm_ops.init and EEPROM access
- * we should init now
- */
- spin_lock_init(&priv->reg_lock);
- spin_lock_init(&priv->lock);
-
- /*
- * stop and reset the on-board processor just in case it is in a
- * strange state ... like being left stranded by a primary kernel
- * and this is now the kdump kernel trying to start up
- */
- iwl_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
-
- /***********************
- * 4. Read EEPROM
- * ********************/
-
- /* Read the EEPROM */
- err = iwl_eeprom_init(priv);
- if (err) {
- IWL_ERR(priv, "Unable to init EEPROM\n");
- goto out_iounmap;
- }
- /* MAC Address location in EEPROM same for 3945/4965 */
- eeprom = (struct iwl3945_eeprom *)priv->eeprom;
- IWL_DEBUG_INFO(priv, "MAC address: %pM\n", eeprom->mac_address);
- SET_IEEE80211_PERM_ADDR(priv->hw, eeprom->mac_address);
-
- /***********************
- * 5. Setup HW Constants
- * ********************/
- /* Device-specific setup */
- if (iwl3945_hw_set_hw_params(priv)) {
- IWL_ERR(priv, "failed to set hw settings\n");
- goto out_eeprom_free;
- }
-
- /***********************
- * 6. Setup priv
- * ********************/
-
- err = iwl3945_init_drv(priv);
- if (err) {
- IWL_ERR(priv, "initializing driver failed\n");
- goto out_unset_hw_params;
- }
-
- IWL_INFO(priv, "Detected Intel Wireless WiFi Link %s\n",
- priv->cfg->name);
-
- /***********************
- * 7. Setup Services
- * ********************/
-
- spin_lock_irqsave(&priv->lock, flags);
- iwl_disable_interrupts(priv);
- spin_unlock_irqrestore(&priv->lock, flags);
-
- pci_enable_msi(priv->pci_dev);
-
- err = request_irq(priv->pci_dev->irq, priv->cfg->ops->lib->isr_ops.isr,
- IRQF_SHARED, DRV_NAME, priv);
- if (err) {
- IWL_ERR(priv, "Error allocating IRQ %d\n", priv->pci_dev->irq);
- goto out_disable_msi;
- }
-
- err = sysfs_create_group(&pdev->dev.kobj, &iwl3945_attribute_group);
- if (err) {
- IWL_ERR(priv, "failed to create sysfs device attributes\n");
- goto out_release_irq;
- }
-
- iwl_set_rxon_channel(priv,
- &priv->bands[IEEE80211_BAND_2GHZ].channels[5],
- &priv->contexts[IWL_RXON_CTX_BSS]);
- iwl3945_setup_deferred_work(priv);
- iwl3945_setup_rx_handlers(priv);
- iwl_power_initialize(priv);
-
- /*********************************
- * 8. Setup and Register mac80211
- * *******************************/
-
- iwl_enable_interrupts(priv);
-
- err = iwl3945_setup_mac(priv);
- if (err)
- goto out_remove_sysfs;
-
- err = iwl_dbgfs_register(priv, DRV_NAME);
- if (err)
- IWL_ERR(priv, "failed to create debugfs files. Ignoring error: %d\n", err);
-
- /* Start monitoring the killswitch */
- queue_delayed_work(priv->workqueue, &priv->_3945.rfkill_poll,
- 2 * HZ);
-
- return 0;
-
- out_remove_sysfs:
- destroy_workqueue(priv->workqueue);
- priv->workqueue = NULL;
- sysfs_remove_group(&pdev->dev.kobj, &iwl3945_attribute_group);
- out_release_irq:
- free_irq(priv->pci_dev->irq, priv);
- out_disable_msi:
- pci_disable_msi(priv->pci_dev);
- iwlcore_free_geos(priv);
- iwl_free_channel_map(priv);
- out_unset_hw_params:
- iwl3945_unset_hw_params(priv);
- out_eeprom_free:
- iwl_eeprom_free(priv);
- out_iounmap:
- pci_iounmap(pdev, priv->hw_base);
- out_pci_release_regions:
- pci_release_regions(pdev);
- out_pci_disable_device:
- pci_set_drvdata(pdev, NULL);
- pci_disable_device(pdev);
- out_ieee80211_free_hw:
- iwl_free_traffic_mem(priv);
- ieee80211_free_hw(priv->hw);
- out:
- return err;
-}
-
-static void __devexit iwl3945_pci_remove(struct pci_dev *pdev)
-{
- struct iwl_priv *priv = pci_get_drvdata(pdev);
- unsigned long flags;
-
- if (!priv)
- return;
-
- IWL_DEBUG_INFO(priv, "*** UNLOAD DRIVER ***\n");
-
- iwl_dbgfs_unregister(priv);
-
- set_bit(STATUS_EXIT_PENDING, &priv->status);
-
- iwl_leds_exit(priv);
-
- if (priv->mac80211_registered) {
- ieee80211_unregister_hw(priv->hw);
- priv->mac80211_registered = 0;
- } else {
- iwl3945_down(priv);
- }
-
- /*
- * Make sure device is reset to low power before unloading driver.
- * This may be redundant with iwl_down(), but there are paths to
- * run iwl_down() without calling apm_ops.stop(), and there are
- * paths to avoid running iwl_down() at all before leaving driver.
- * This (inexpensive) call *makes sure* device is reset.
- */
- iwl_apm_stop(priv);
-
- /* make sure we flush any pending irq or
- * tasklet for the driver
- */
- spin_lock_irqsave(&priv->lock, flags);
- iwl_disable_interrupts(priv);
- spin_unlock_irqrestore(&priv->lock, flags);
-
- iwl_synchronize_irq(priv);
-
- sysfs_remove_group(&pdev->dev.kobj, &iwl3945_attribute_group);
-
- cancel_delayed_work_sync(&priv->_3945.rfkill_poll);
-
- iwl3945_dealloc_ucode_pci(priv);
-
- if (priv->rxq.bd)
- iwl3945_rx_queue_free(priv, &priv->rxq);
- iwl3945_hw_txq_ctx_free(priv);
-
- iwl3945_unset_hw_params(priv);
-
- /*netif_stop_queue(dev); */
- flush_workqueue(priv->workqueue);
-
- /* ieee80211_unregister_hw calls iwl3945_mac_stop, which flushes
- * priv->workqueue... so we can't take down the workqueue
- * until now... */
- destroy_workqueue(priv->workqueue);
- priv->workqueue = NULL;
- iwl_free_traffic_mem(priv);
-
- free_irq(pdev->irq, priv);
- pci_disable_msi(pdev);
-
- pci_iounmap(pdev, priv->hw_base);
- pci_release_regions(pdev);
- pci_disable_device(pdev);
- pci_set_drvdata(pdev, NULL);
-
- iwl_free_channel_map(priv);
- iwlcore_free_geos(priv);
- kfree(priv->scan_cmd);
- if (priv->beacon_skb)
- dev_kfree_skb(priv->beacon_skb);
-
- ieee80211_free_hw(priv->hw);
-}
-
-
-/*****************************************************************************
- *
- * driver and module entry point
- *
- *****************************************************************************/
-
-static struct pci_driver iwl3945_driver = {
- .name = DRV_NAME,
- .id_table = iwl3945_hw_card_ids,
- .probe = iwl3945_pci_probe,
- .remove = __devexit_p(iwl3945_pci_remove),
- .driver.pm = IWL_PM_OPS,
-};
-
-static int __init iwl3945_init(void)
-{
-
- int ret;
- pr_info(DRV_DESCRIPTION ", " DRV_VERSION "\n");
- pr_info(DRV_COPYRIGHT "\n");
-
- ret = iwl3945_rate_control_register();
- if (ret) {
- pr_err("Unable to register rate control algorithm: %d\n", ret);
- return ret;
- }
-
- ret = pci_register_driver(&iwl3945_driver);
- if (ret) {
- pr_err("Unable to initialize PCI module\n");
- goto error_register;
- }
-
- return ret;
-
-error_register:
- iwl3945_rate_control_unregister();
- return ret;
-}
-
-static void __exit iwl3945_exit(void)
-{
- pci_unregister_driver(&iwl3945_driver);
- iwl3945_rate_control_unregister();
-}
-
-MODULE_FIRMWARE(IWL3945_MODULE_FIRMWARE(IWL3945_UCODE_API_MAX));
-
-module_param_named(antenna, iwl3945_mod_params.antenna, int, S_IRUGO);
-MODULE_PARM_DESC(antenna, "select antenna (1=Main, 2=Aux, default 0 [both])");
-module_param_named(swcrypto, iwl3945_mod_params.sw_crypto, int, S_IRUGO);
-MODULE_PARM_DESC(swcrypto,
- "using software crypto (default 1 [software])\n");
-#ifdef CONFIG_IWLWIFI_DEBUG
-module_param_named(debug, iwl_debug_level, uint, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(debug, "debug output mask");
-#endif
-module_param_named(disable_hw_scan, iwl3945_mod_params.disable_hw_scan,
- int, S_IRUGO);
-MODULE_PARM_DESC(disable_hw_scan,
- "disable hardware scanning (default 0) (deprecated)");
-module_param_named(fw_restart3945, iwl3945_mod_params.restart_fw, int, S_IRUGO);
-MODULE_PARM_DESC(fw_restart3945, "restart firmware in case of error");
-
-module_exit(iwl3945_exit);
-module_init(iwl3945_init);
--
1.7.0.4
^ permalink raw reply related [flat|nested] 14+ messages in thread