From: Bing Zhao <bzhao@marvell.com>
To: linux-wireless@vger.kernel.org
Cc: "John W. Linville" <linville@tuxdriver.com>,
Johannes Berg <johannes@sipsolutions.net>,
Amitkumar Karwar <akarwar@marvell.com>,
Kiran Divekar <dkiran@marvell.com>,
Yogesh Powar <yogeshp@marvell.com>,
Marc Yang <yangyang@marvell.com>,
Frank Huang <frankh@marvell.com>, Bing Zhao <bzhao@marvell.com>
Subject: [PATCH 01/11] mwifiex: remove txratecfg command from debugfs
Date: Wed, 16 Mar 2011 17:09:24 -0700 [thread overview]
Message-ID: <1300320574-10793-2-git-send-email-bzhao@marvell.com> (raw)
In-Reply-To: <1300320574-10793-1-git-send-email-bzhao@marvell.com>
From: Marc Yang <yangyang@marvell.com>
remove the Tx rate configuration API from debugfs
Signed-off-by: Marc Yang <yangyang@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
---
drivers/net/wireless/mwifiex/README | 45 -------
drivers/net/wireless/mwifiex/debugfs.c | 72 ----------
drivers/net/wireless/mwifiex/decl.h | 4 -
drivers/net/wireless/mwifiex/ioctl.h | 6 -
drivers/net/wireless/mwifiex/main.c | 1 -
drivers/net/wireless/mwifiex/main.h | 1 -
drivers/net/wireless/mwifiex/sta_ioctl.c | 209 +-----------------------------
7 files changed, 7 insertions(+), 331 deletions(-)
diff --git a/drivers/net/wireless/mwifiex/README b/drivers/net/wireless/mwifiex/README
index aa5ce10..374df48 100644
--- a/drivers/net/wireless/mwifiex/README
+++ b/drivers/net/wireless/mwifiex/README
@@ -354,51 +354,6 @@ qoscfg
echo "15" > qoscfg : Set WMM IE QOS info to 0x0f
cat qoscfg : Get WMM IE QOS info
-txratecfg
- This command is used to set/get the transmit data rate.
-
- Note:
- The data rate can be set only after association.
-
- Usage:
- echo "<n> " > txratecfg
- cat txratecfg
-
- Where <n>
- data rate
- Data rate
- 0 1 Mbps
- 1 2 Mbps
- 2 5.5 Mbps
- 3 11 Mbps
- 4 6 Mbps
- 5 9 Mbps
- 6 12 Mbps
- 7 18 Mbps
- 8 24 Mbps
- 9 36 Mbps
- 10 48 Mbps
- 11 54 Mbps
- 12 MCS0
- 13 MCS1
- 14 MCS2
- 15 MCS3
- 16 MCS4
- 17 MCS5
- 18 MCS6
- 19 MCS7
- 44 MCS32
- 0xff Auto
-
- Examples:
- echo "3" > txratecfg : Set fixed Tx rate to 11 Mbps
- echo "11" > txratecfg : Set fixed Tx rate to 54 Mbps
- echo "15" > txratecfg : Set fixed Tx rate to MCS3
- echo "255" > txratecfg : Disable fixed rate and uses auto rate
- cat txratecfg : Read the current data rate setting
-
-
-
regrdwr
This command is used to read/write the adapter register.
diff --git a/drivers/net/wireless/mwifiex/debugfs.c b/drivers/net/wireless/mwifiex/debugfs.c
index 6b3600b..1809c44 100644
--- a/drivers/net/wireless/mwifiex/debugfs.c
+++ b/drivers/net/wireless/mwifiex/debugfs.c
@@ -914,76 +914,6 @@ mwifiex_qoscfg_read(struct file *file, char __user *ubuf,
}
/*
- * Proc txratecfg file write handler.
- *
- * This function is called when the 'txratecfg' file is opened for writing
- *
- * This function can be used to set the Tx rate configuration.
- */
-static ssize_t
-mwifiex_txratecfg_write(struct file *file, const char __user *ubuf,
- size_t count, loff_t *ppos)
-{
- struct mwifiex_private *priv =
- (struct mwifiex_private *) file->private_data;
- unsigned long addr = get_zeroed_page(GFP_KERNEL);
- char *buf = (char *) addr;
- size_t buf_size = min(count, (size_t) (PAGE_SIZE - 1));
- int txrateindex = 0;
- int ret = 0;
-
- if (!buf)
- return -ENOMEM;
-
- if (copy_from_user(buf, ubuf, buf_size)) {
- ret = -EFAULT;
- goto done;
- }
-
- sscanf(buf, "%d", &txrateindex);
-
- ret = mwifiex_set_tx_rate_cfg(priv, txrateindex);
-
- if (!ret)
- ret = count;
-
-done:
- free_page(addr);
- return ret;
-}
-
-/*
- * Proc txratecfg file read handler.
- *
- * This function is called when the 'txratecfg' file is opened for reading
- *
- * This function can be used to get the Tx rate configuration.
- */
-static ssize_t
-mwifiex_txratecfg_read(struct file *file, char __user *ubuf,
- size_t count, loff_t *ppos)
-{
- struct mwifiex_private *priv =
- (struct mwifiex_private *) file->private_data;
- unsigned long addr = get_zeroed_page(GFP_KERNEL);
- char *buf = (char *) addr;
- int pos = 0, ret = 0;
- int txrateindex = 0;
-
- if (!buf)
- return -ENOMEM;
-
- mwifiex_get_tx_rate_cfg(priv, &txrateindex);
-
- pos += snprintf(buf, PAGE_SIZE, "%d\n", txrateindex);
-
- ret = simple_read_from_buffer(ubuf, count, ppos, buf, pos);
-
- free_page(addr);
- return ret;
-}
-
-/*
* Proc httxcfg file write handler.
*
* This function is called when the 'httxcfg' file is opened for writing
@@ -1634,7 +1564,6 @@ MWIFIEX_DFS_FILE_OPS(amsduaggrctrl);
MWIFIEX_DFS_FILE_OPS(sleeppd);
MWIFIEX_DFS_FILE_OPS(mpactrl);
MWIFIEX_DFS_FILE_OPS(qoscfg);
-MWIFIEX_DFS_FILE_OPS(txratecfg);
MWIFIEX_DFS_FILE_OPS(httxcfg);
MWIFIEX_DFS_FILE_READ_OPS(getlog);
MWIFIEX_DFS_FILE_OPS(antcfg);
@@ -1666,7 +1595,6 @@ mwifiex_dev_debugfs_init(struct mwifiex_private *priv)
MWIFIEX_DFS_ADD_FILE(sleeppd);
MWIFIEX_DFS_ADD_FILE(mpactrl);
MWIFIEX_DFS_ADD_FILE(qoscfg);
- MWIFIEX_DFS_ADD_FILE(txratecfg);
MWIFIEX_DFS_ADD_FILE(httxcfg);
MWIFIEX_DFS_ADD_FILE(getlog);
MWIFIEX_DFS_ADD_FILE(antcfg);
diff --git a/drivers/net/wireless/mwifiex/decl.h b/drivers/net/wireless/mwifiex/decl.h
index 37421af..4e1f115 100644
--- a/drivers/net/wireless/mwifiex/decl.h
+++ b/drivers/net/wireless/mwifiex/decl.h
@@ -39,15 +39,11 @@
#define MWIFIEX_AMPDU_DEF_RXWINSIZE 16
#define MWIFIEX_DEFAULT_BLOCK_ACK_TIMEOUT 0xffff
-#define AUTO_RATE 0xff
#define MWIFIEX_RATE_INDEX_HRDSSS0 0
#define MWIFIEX_RATE_INDEX_HRDSSS3 3
#define MWIFIEX_RATE_INDEX_OFDM0 4
#define MWIFIEX_RATE_INDEX_OFDM7 11
#define MWIFIEX_RATE_INDEX_MCS0 12
-#define MWIFIEX_RATE_INDEX_MCS7 19
-#define MWIFIEX_RATE_INDEX_MCS32 44
-#define MWIFIEX_RATE_INDEX_MCS127 139
#define MWIFIEX_RATE_BITMAP_OFDM0 16
#define MWIFIEX_RATE_BITMAP_OFDM7 23
diff --git a/drivers/net/wireless/mwifiex/ioctl.h b/drivers/net/wireless/mwifiex/ioctl.h
index d4e895d..115476a 100644
--- a/drivers/net/wireless/mwifiex/ioctl.h
+++ b/drivers/net/wireless/mwifiex/ioctl.h
@@ -339,15 +339,9 @@ struct mwifiex_ds_esupp_mode {
u32 act_groupcipher;
};
-enum {
- MWIFIEX_RATE_INDEX,
- MWIFIEX_RATE_VALUE
-};
-
struct mwifiex_rate_cfg {
u32 action;
u32 is_rate_auto;
- u32 rate_type;
u32 rate;
};
diff --git a/drivers/net/wireless/mwifiex/main.c b/drivers/net/wireless/mwifiex/main.c
index a5a1d78..7b7f344 100644
--- a/drivers/net/wireless/mwifiex/main.c
+++ b/drivers/net/wireless/mwifiex/main.c
@@ -681,7 +681,6 @@ mwifiex_init_priv_params(struct mwifiex_private *priv, struct net_device *dev)
init_waitqueue_head(&priv->cmd_wait_q);
init_waitqueue_head(&priv->w_stats_wait_q);
priv->current_key_index = 0;
- priv->rate_index = AUTO_RATE;
priv->media_connected = false;
memset(&priv->nick_name, 0, sizeof(priv->nick_name));
priv->num_tx_timeout = 0;
diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index b34e811..f3626fc 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -495,7 +495,6 @@ struct mwifiex_private {
u16 w_stats_wait_q_woken;
wait_queue_head_t w_stats_wait_q;
u16 current_key_index;
- u16 rate_index;
struct semaphore async_sem;
u8 scan_pending_on_block;
u8 report_scan_result;
diff --git a/drivers/net/wireless/mwifiex/sta_ioctl.c b/drivers/net/wireless/mwifiex/sta_ioctl.c
index 0c72371..b880a00 100644
--- a/drivers/net/wireless/mwifiex/sta_ioctl.c
+++ b/drivers/net/wireless/mwifiex/sta_ioctl.c
@@ -1440,94 +1440,6 @@ static int mwifiex_rate_ioctl_set_rate_value(struct mwifiex_private *priv,
}
/*
- * IOCTL request handler to get rate.
- *
- * This function prepares the correct firmware command and
- * issues it to get the data rate index.
- */
-static int mwifiex_rate_ioctl_get_rate_index(struct mwifiex_private *priv,
- struct mwifiex_wait_queue *wait,
- struct mwifiex_rate_cfg *rate_cfg)
-{
- int ret = 0;
-
- /* Send request to firmware */
- ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_TX_RATE_CFG,
- HostCmd_ACT_GEN_GET, 0, wait, rate_cfg);
- if (!ret)
- ret = -EINPROGRESS;
-
- return ret;
-}
-
-/*
- * IOCTL request handler to set rate.
- *
- * This function prepares the correct firmware command and
- * issues it to set the data rate index.
- */
-static int mwifiex_rate_ioctl_set_rate_index(struct mwifiex_private *priv,
- struct mwifiex_wait_queue *wait,
- struct mwifiex_rate_cfg *rate_cfg)
-{
- int rate_index;
- u32 i;
- int ret = 0;
- u16 bitmap_rates[MAX_BITMAP_RATES_SIZE];
-
- rate_index = rate_cfg->rate;
- if (rate_cfg->is_rate_auto) {
- memset(bitmap_rates, 0, sizeof(bitmap_rates));
- /* Support all HR/DSSS rates */
- bitmap_rates[0] = 0x000F;
- /* Support all OFDM rates */
- bitmap_rates[1] = 0x00FF;
- /* Support all HT-MCSs rate */
- for (i = 0; i < ARRAY_SIZE(bitmap_rates) - 3; i++)
- bitmap_rates[i + 2] = 0xFFFF;
- bitmap_rates[9] = 0x3FFF;
- } else {
- dev_dbg(priv->adapter->dev, "info: Rate index is %d\n",
- rate_index);
- memset(bitmap_rates, 0, sizeof(bitmap_rates));
- /* Bitmap of HR/DSSS rates */
- if (rate_index >= MWIFIEX_RATE_INDEX_HRDSSS0 &&
- rate_index <= MWIFIEX_RATE_INDEX_HRDSSS3)
- bitmap_rates[0] = 1 << rate_index;
- /* Bitmap of OFDM rates */
- if (rate_index >= MWIFIEX_RATE_INDEX_OFDM0 &&
- rate_index <= MWIFIEX_RATE_INDEX_OFDM7)
- bitmap_rates[1] =
- 1 << (rate_index - MWIFIEX_RATE_INDEX_OFDM0);
- /* Bitmap of HT-MCSs allowed for initial rate */
- if (rate_index >= MWIFIEX_RATE_INDEX_MCS0 &&
- rate_index <= MWIFIEX_RATE_INDEX_MCS32)
- bitmap_rates[((rate_index -
- MWIFIEX_RATE_INDEX_MCS0) / 16) + 2] =
- 1 << ((rate_index - MWIFIEX_RATE_INDEX_MCS0) %
- 16);
- }
-
- dev_dbg(priv->adapter->dev, "info: RateBitmap="
- "%04x%04x%04x%04x%04x%04x%04x%04x%04x%04x, "
- "IsRateAuto=%d, DataRate=%d\n",
- bitmap_rates[9], bitmap_rates[8],
- bitmap_rates[7], bitmap_rates[6],
- bitmap_rates[5], bitmap_rates[4],
- bitmap_rates[3], bitmap_rates[2],
- bitmap_rates[1], bitmap_rates[0],
- priv->is_data_rate_auto, priv->data_rate);
-
- /* Send request to firmware */
- ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_TX_RATE_CFG,
- HostCmd_ACT_GEN_SET, 0, wait, bitmap_rates);
- if (!ret)
- ret = -EINPROGRESS;
-
- return ret;
-}
-
-/*
* IOCTL request handler to set/get rate.
*
* This function can be used to set/get either the rate value or the
@@ -1541,21 +1453,13 @@ static int mwifiex_rate_ioctl_cfg(struct mwifiex_private *priv,
if (!rate_cfg)
return -1;
- if (rate_cfg->rate_type == MWIFIEX_RATE_VALUE) {
- if (rate_cfg->action == HostCmd_ACT_GEN_GET)
- status = mwifiex_rate_ioctl_get_rate_value(
- priv, wait, rate_cfg);
- else
- status = mwifiex_rate_ioctl_set_rate_value(
- priv, wait, rate_cfg);
- } else {
- if (rate_cfg->action == HostCmd_ACT_GEN_GET)
- status = mwifiex_rate_ioctl_get_rate_index(
- priv, wait, rate_cfg);
- else
- status = mwifiex_rate_ioctl_set_rate_index(
- priv, wait, rate_cfg);
- }
+
+ if (rate_cfg->action == HostCmd_ACT_GEN_GET)
+ status = mwifiex_rate_ioctl_get_rate_value(
+ priv, wait, rate_cfg);
+ else
+ status = mwifiex_rate_ioctl_set_rate_value(
+ priv, wait, rate_cfg);
return status;
}
@@ -1580,7 +1484,6 @@ int mwifiex_drv_get_data_rate(struct mwifiex_private *priv,
memset(rate, 0, sizeof(struct mwifiex_rate_cfg));
rate->action = HostCmd_ACT_GEN_GET;
- rate->rate_type = MWIFIEX_RATE_VALUE;
ret = mwifiex_rate_ioctl_cfg(priv, wait, rate);
ret = mwifiex_request_ioctl(priv, wait, ret, wait_option);
@@ -3018,104 +2921,6 @@ done:
}
/*
- * Sends IOCTL request to set Tx rate configurations.
- *
- * This function allocates the IOCTL request buffer, fills it
- * with requisite parameters and calls the IOCTL handler.
- */
-int
-mwifiex_set_tx_rate_cfg(struct mwifiex_private *priv, int tx_rate_idx)
-{
- int ret = 0;
- struct mwifiex_rate_cfg rate_cfg;
- int status = 0;
- struct mwifiex_wait_queue *wait = NULL;
- u8 wait_option = MWIFIEX_IOCTL_WAIT;
-
- /* Allocate wait buffer */
- wait = mwifiex_alloc_fill_wait_queue(priv, wait_option);
- if (!wait)
- return -ENOMEM;
-
- memset(&rate_cfg, 0, sizeof(struct mwifiex_rate_cfg));
- rate_cfg.action = HostCmd_ACT_GEN_SET;
- rate_cfg.rate_type = MWIFIEX_RATE_INDEX;
- if (tx_rate_idx == AUTO_RATE) {
- rate_cfg.is_rate_auto = 1;
- } else {
- if ((tx_rate_idx != MWIFIEX_RATE_INDEX_MCS32) &&
- ((tx_rate_idx < 0)
- || (tx_rate_idx > MWIFIEX_RATE_INDEX_MCS7))) {
- ret = -EINVAL;
- goto done;
- }
- rate_cfg.rate = tx_rate_idx;
- }
- status = mwifiex_rate_ioctl_cfg(priv, wait, &rate_cfg);
-
- if (mwifiex_request_ioctl(priv, wait, status, wait_option))
- ret = -EFAULT;
-done:
- kfree(wait);
- return ret;
-}
-
-/*
- * Sends IOCTL request to get Tx rate configurations.
- *
- * This function allocates the IOCTL request buffer, fills it
- * with requisite parameters and calls the IOCTL handler.
- */
-int
-mwifiex_get_tx_rate_cfg(struct mwifiex_private *priv, int *tx_rate_idx)
-{
- int ret = 0;
- struct mwifiex_rate_cfg rate_cfg;
- int status = 0;
- struct mwifiex_wait_queue *wait = NULL;
- u8 wait_option = MWIFIEX_IOCTL_WAIT;
-
- /* TX rate configuration can be set only if media connected */
- if (!priv->media_connected) {
- dev_dbg(priv->adapter->dev,
- "info: Can not set txratecfg in disconnected state\n");
- return -1;
- }
-
- wait = mwifiex_alloc_fill_wait_queue(priv, wait_option);
- if (!wait)
- return -ENOMEM;
-
- memset(&rate_cfg, 0, sizeof(struct mwifiex_rate_cfg));
- rate_cfg.action = HostCmd_ACT_GEN_GET;
- rate_cfg.rate_type = MWIFIEX_RATE_INDEX;
- status = mwifiex_rate_ioctl_cfg(priv, wait, &rate_cfg);
-
- if (mwifiex_request_ioctl(priv, wait, status, wait_option)) {
- ret = -EFAULT;
- goto done;
- }
-
- if (priv->tx_htinfo & BIT(0))
- rate_cfg.rate = priv->tx_rate + MWIFIEX_RATE_INDEX_MCS0;
- else
- /* For HostCmd_CMD_802_11_TX_RATE_QUERY
- , there is a hole in rate table
- between HR/DSSS and OFDM rates, so
- minus 1 for OFDM rate index */
- rate_cfg.rate = (priv->tx_rate > MWIFIEX_RATE_INDEX_OFDM0)
- ? priv->tx_rate - 1 : priv->tx_rate;
-
- if (priv->is_data_rate_auto)
- *tx_rate_idx = AUTO_RATE;
- else
- *tx_rate_idx = rate_cfg.rate;
-done:
- kfree(wait);
- return ret;
-}
-
-/*
* Set eWPA mode if passphrase/psk is set
*/
int mwifiex_set_ewpa_mode_from_passphrase(struct mwifiex_private *priv,
--
1.7.0.2
next prev parent reply other threads:[~2011-03-17 0:06 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-17 0:09 [PATCH 00/11] remove configuration APIs from debugfs (part 2) Bing Zhao
2011-03-17 0:09 ` Bing Zhao [this message]
2011-03-17 0:09 ` [PATCH 02/11] mwifiex: remove httxcfg command from debugfs Bing Zhao
2011-03-17 0:09 ` [PATCH 03/11] mwifiex: remove mpactrl " Bing Zhao
2011-03-17 0:09 ` [PATCH 04/11] mwifiex: remove antcfg " Bing Zhao
2011-03-17 0:09 ` [PATCH 05/11] mwifiex: remove esuppmode " Bing Zhao
2011-03-17 0:09 ` [PATCH 06/11] mwifiex: remove passphrase " Bing Zhao
2011-03-17 0:09 ` [PATCH 07/11] mwifiex: remove unnecessary flag ewpa_enabled Bing Zhao
2011-03-17 0:09 ` [PATCH 08/11] mwifiex: remove some redundant WEP key handling Bing Zhao
2011-03-17 0:09 ` [PATCH 09/11] mwifiex: optimize add_key callback function Bing Zhao
2011-03-17 0:09 ` [PATCH 10/11] mwifiex: remove txbufcfg command from debugfs Bing Zhao
2011-03-17 0:09 ` [PATCH 11/11] mwifiex: remove amsduaggrctrl " Bing Zhao
2011-03-17 9:32 ` [PATCH 00/11] remove configuration APIs from debugfs (part 2) Johannes Berg
2011-03-17 17:53 ` Bing Zhao
2011-03-17 18:00 ` Johannes Berg
2011-03-17 18:07 ` Bing Zhao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1300320574-10793-2-git-send-email-bzhao@marvell.com \
--to=bzhao@marvell.com \
--cc=akarwar@marvell.com \
--cc=dkiran@marvell.com \
--cc=frankh@marvell.com \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=yangyang@marvell.com \
--cc=yogeshp@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox