From: Vasanthakumar Thiagarajan <vasanth@atheros.com>
To: <linville@tuxdriver.com>
Cc: <linux-wireless@vger.kernel.org>
Subject: [PATCH 08/22] ath9k_hw: Initialize tx and rx gain table from initvals.h for ar9340
Date: Tue, 12 Apr 2011 18:27:08 +0530 [thread overview]
Message-ID: <1302613042-1754-9-git-send-email-vasanth@atheros.com> (raw)
In-Reply-To: <1302613042-1754-1-git-send-email-vasanth@atheros.com>
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
---
drivers/net/wireless/ath/ath9k/ar9003_hw.c | 42 ++++++++++++++++++++++++----
1 files changed, 36 insertions(+), 6 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_hw.c b/drivers/net/wireless/ath/ath9k/ar9003_hw.c
index 37af721..a55eddb 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_hw.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_hw.c
@@ -220,7 +220,12 @@ static void ar9003_tx_gain_table_apply(struct ath_hw *ah)
switch (ar9003_hw_get_tx_gain_idx(ah)) {
case 0:
default:
- if (AR_SREV_9485_11(ah))
+ if (AR_SREV_9340(ah))
+ INIT_INI_ARRAY(&ah->iniModesTxGain,
+ ar9340Modes_lowest_ob_db_tx_gain_table_1p0,
+ ARRAY_SIZE(ar9340Modes_lowest_ob_db_tx_gain_table_1p0),
+ 5);
+ else if (AR_SREV_9485_11(ah))
INIT_INI_ARRAY(&ah->iniModesTxGain,
ar9485_modes_lowest_ob_db_tx_gain_1_1,
ARRAY_SIZE(ar9485_modes_lowest_ob_db_tx_gain_1_1),
@@ -232,7 +237,12 @@ static void ar9003_tx_gain_table_apply(struct ath_hw *ah)
5);
break;
case 1:
- if (AR_SREV_9485_11(ah))
+ if (AR_SREV_9340(ah))
+ INIT_INI_ARRAY(&ah->iniModesTxGain,
+ ar9340Modes_lowest_ob_db_tx_gain_table_1p0,
+ ARRAY_SIZE(ar9340Modes_lowest_ob_db_tx_gain_table_1p0),
+ 5);
+ else if (AR_SREV_9485_11(ah))
INIT_INI_ARRAY(&ah->iniModesTxGain,
ar9485Modes_high_ob_db_tx_gain_1_1,
ARRAY_SIZE(ar9485Modes_high_ob_db_tx_gain_1_1),
@@ -244,7 +254,12 @@ static void ar9003_tx_gain_table_apply(struct ath_hw *ah)
5);
break;
case 2:
- if (AR_SREV_9485_11(ah))
+ if (AR_SREV_9340(ah))
+ INIT_INI_ARRAY(&ah->iniModesTxGain,
+ ar9340Modes_lowest_ob_db_tx_gain_table_1p0,
+ ARRAY_SIZE(ar9340Modes_lowest_ob_db_tx_gain_table_1p0),
+ 5);
+ else if (AR_SREV_9485_11(ah))
INIT_INI_ARRAY(&ah->iniModesTxGain,
ar9485Modes_low_ob_db_tx_gain_1_1,
ARRAY_SIZE(ar9485Modes_low_ob_db_tx_gain_1_1),
@@ -256,7 +271,12 @@ static void ar9003_tx_gain_table_apply(struct ath_hw *ah)
5);
break;
case 3:
- if (AR_SREV_9485_11(ah))
+ if (AR_SREV_9340(ah))
+ INIT_INI_ARRAY(&ah->iniModesTxGain,
+ ar9340Modes_lowest_ob_db_tx_gain_table_1p0,
+ ARRAY_SIZE(ar9340Modes_lowest_ob_db_tx_gain_table_1p0),
+ 5);
+ else if (AR_SREV_9485_11(ah))
INIT_INI_ARRAY(&ah->iniModesTxGain,
ar9485Modes_high_power_tx_gain_1_1,
ARRAY_SIZE(ar9485Modes_high_power_tx_gain_1_1),
@@ -275,7 +295,12 @@ static void ar9003_rx_gain_table_apply(struct ath_hw *ah)
switch (ar9003_hw_get_rx_gain_idx(ah)) {
case 0:
default:
- if (AR_SREV_9485_11(ah))
+ if (AR_SREV_9340(ah))
+ INIT_INI_ARRAY(&ah->iniModesRxGain,
+ ar9340Common_rx_gain_table_1p0,
+ ARRAY_SIZE(ar9340Common_rx_gain_table_1p0),
+ 2);
+ else if (AR_SREV_9485_11(ah))
INIT_INI_ARRAY(&ah->iniModesRxGain,
ar9485Common_wo_xlna_rx_gain_1_1,
ARRAY_SIZE(ar9485Common_wo_xlna_rx_gain_1_1),
@@ -287,7 +312,12 @@ static void ar9003_rx_gain_table_apply(struct ath_hw *ah)
2);
break;
case 1:
- if (AR_SREV_9485_11(ah))
+ if (AR_SREV_9340(ah))
+ INIT_INI_ARRAY(&ah->iniModesRxGain,
+ ar9340Common_wo_xlna_rx_gain_table_1p0,
+ ARRAY_SIZE(ar9340Common_wo_xlna_rx_gain_table_1p0),
+ 2);
+ else if (AR_SREV_9485_11(ah))
INIT_INI_ARRAY(&ah->iniModesRxGain,
ar9485Common_wo_xlna_rx_gain_1_1,
ARRAY_SIZE(ar9485Common_wo_xlna_rx_gain_1_1),
--
1.7.0.4
next prev parent reply other threads:[~2011-04-12 13:00 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-12 12:57 [PATCH 00/22] Add support for AR9340 Vasanthakumar Thiagarajan
2011-04-12 12:57 ` [PATCH 01/22] ath9k_hw: Define devid and mac version " Vasanthakumar Thiagarajan
2011-04-12 12:57 ` [PATCH 02/22] ath9k_hw: Take care of few host interface register changes " Vasanthakumar Thiagarajan
2011-04-13 11:05 ` Kalle Valo
2011-04-19 5:56 ` Vasanthakumar Thiagarajan
2011-04-12 12:57 ` [PATCH 05/22] ath9k_hw: Add initvals.h for ar9340 Vasanthakumar Thiagarajan
2011-04-12 12:57 ` Vasanthakumar Thiagarajan [this message]
2011-04-12 12:57 ` [PATCH 12/22] ath9k_hw: Fix register offset AR_PHY_65NM_CH0_THERM for AR9340 Vasanthakumar Thiagarajan
2011-04-12 12:57 ` [PATCH 13/22] ath9k_hw: Don't configure AR_CH0_THERM " Vasanthakumar Thiagarajan
2011-04-12 12:57 ` [PATCH 16/22] ath9k_hw: Enable byte Tx/Rx data swap " Vasanthakumar Thiagarajan
2011-04-12 12:57 ` [PATCH 19/22] ath9k: Add AR9340 platform id to id table Vasanthakumar Thiagarajan
2011-04-12 12:57 ` [PATCH 20/22] ath9k_hw: Assign macversion based on devid for built-in wmac Vasanthakumar Thiagarajan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1302613042-1754-9-git-send-email-vasanth@atheros.com \
--to=vasanth@atheros.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).