From: Felix Fietkau <nbd@openwrt.org>
To: linux-wireless@vger.kernel.org
Cc: linville@tuxdriver.com, lrodriguez@atheros.com,
jouni.malinen@atheros.com
Subject: [PATCH 2/2] ath9k: assign keycache slots to unencrypted stations
Date: Sun, 17 Apr 2011 23:28:10 +0200 [thread overview]
Message-ID: <1303075690-53804-2-git-send-email-nbd@openwrt.org> (raw)
In-Reply-To: <1303075690-53804-1-git-send-email-nbd@openwrt.org>
Frame filtering relies on having a valid destination index (keycache slot),
to keep track of the destination. Assigning a keycache slot (configured
to unencrypted, with no key data attached) improves powersave handling in
AP mode with no encryption.
The dummy keycache entry for a station is cleared, when a real key gets
added.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
drivers/net/wireless/ath/ath9k/ath9k.h | 2 ++
drivers/net/wireless/ath/ath9k/main.c | 22 ++++++++++++++++++++++
drivers/net/wireless/ath/ath9k/xmit.c | 10 +++++++---
drivers/net/wireless/ath/key.c | 6 +++++-
4 files changed, 36 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index a2ddabf..a6b5388 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -256,6 +256,8 @@ struct ath_node {
#endif
struct ath_atx_tid tid[WME_NUM_TID];
struct ath_atx_ac ac[WME_NUM_AC];
+ int ps_key;
+
u16 maxampdu;
u8 mpdudensity;
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 44f4d59..a8d9009 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1736,18 +1736,37 @@ static int ath9k_sta_add(struct ieee80211_hw *hw,
struct ieee80211_sta *sta)
{
struct ath_softc *sc = hw->priv;
+ struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+ struct ath_node *an = (struct ath_node *) sta->drv_priv;
+ struct ieee80211_key_conf ps_key = { };
ath_node_attach(sc, sta);
+ an->ps_key = ath_key_config(common, vif, sta, &ps_key);
return 0;
}
+static void ath9k_del_ps_key(struct ath_softc *sc,
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta)
+{
+ struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+ struct ath_node *an = (struct ath_node *) sta->drv_priv;
+ struct ieee80211_key_conf ps_key = { .hw_key_idx = an->ps_key };
+
+ if (!an->ps_key)
+ return;
+
+ ath_key_delete(common, &ps_key);
+}
+
static int ath9k_sta_remove(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_sta *sta)
{
struct ath_softc *sc = hw->priv;
+ ath9k_del_ps_key(sc, vif, sta);
ath_node_detach(sc, sta);
return 0;
@@ -1850,6 +1869,9 @@ static int ath9k_set_key(struct ieee80211_hw *hw,
switch (cmd) {
case SET_KEY:
+ if (sta)
+ ath9k_del_ps_key(sc, vif, sta);
+
ret = ath_key_config(common, vif, sta, key);
if (ret >= 0) {
key->hw_key_idx = ret;
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index a1230c0..e9e99f7 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -1526,7 +1526,7 @@ static void setup_frame_info(struct ieee80211_hw *hw, struct sk_buff *skb,
struct ieee80211_key_conf *hw_key = tx_info->control.hw_key;
struct ieee80211_hdr *hdr;
struct ath_frame_info *fi = get_frame_info(skb);
- struct ath_node *an;
+ struct ath_node *an = NULL;
struct ath_atx_tid *tid;
enum ath9k_key_type keytype;
u16 seqno = 0;
@@ -1534,11 +1534,13 @@ static void setup_frame_info(struct ieee80211_hw *hw, struct sk_buff *skb,
keytype = ath9k_cmn_get_hw_crypto_keytype(skb);
+ if (sta)
+ an = (struct ath_node *) sta->drv_priv;
+
hdr = (struct ieee80211_hdr *)skb->data;
- if (sta && ieee80211_is_data_qos(hdr->frame_control) &&
+ if (an && ieee80211_is_data_qos(hdr->frame_control) &&
conf_is_ht(&hw->conf) && (sc->sc_flags & SC_OP_TXAGGR)) {
- an = (struct ath_node *) sta->drv_priv;
tidno = ieee80211_get_qos_ctl(hdr)[0] & IEEE80211_QOS_CTL_TID_MASK;
/*
@@ -1554,6 +1556,8 @@ static void setup_frame_info(struct ieee80211_hw *hw, struct sk_buff *skb,
memset(fi, 0, sizeof(*fi));
if (hw_key)
fi->keyix = hw_key->hw_key_idx;
+ else if (an && ieee80211_is_data(hdr->frame_control) && an->ps_key > 0)
+ fi->keyix = an->ps_key;
else
fi->keyix = ATH9K_TXKEYIX_INVALID;
fi->keytype = keytype;
diff --git a/drivers/net/wireless/ath/key.c b/drivers/net/wireless/ath/key.c
index 0d4f39c..a61ef3d6 100644
--- a/drivers/net/wireless/ath/key.c
+++ b/drivers/net/wireless/ath/key.c
@@ -483,6 +483,9 @@ int ath_key_config(struct ath_common *common,
memset(&hk, 0, sizeof(hk));
switch (key->cipher) {
+ case 0:
+ hk.kv_type = ATH_CIPHER_CLR;
+ break;
case WLAN_CIPHER_SUITE_WEP40:
case WLAN_CIPHER_SUITE_WEP104:
hk.kv_type = ATH_CIPHER_WEP;
@@ -498,7 +501,8 @@ int ath_key_config(struct ath_common *common,
}
hk.kv_len = key->keylen;
- memcpy(hk.kv_val, key->key, key->keylen);
+ if (key->keylen)
+ memcpy(hk.kv_val, key->key, key->keylen);
if (!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) {
switch (vif->type) {
--
1.7.3.2
next prev parent reply other threads:[~2011-04-17 21:28 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-17 21:28 [PATCH 1/2] ath9k: fix powersave frame filtering/buffering in AP mode Felix Fietkau
2011-04-17 21:28 ` Felix Fietkau [this message]
2011-04-18 4:26 ` Sujith
2011-04-18 8:54 ` Felix Fietkau
2011-04-18 11:10 ` Sujith
2011-04-18 11:27 ` Felix Fietkau
2011-04-18 11:45 ` Sujith
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1303075690-53804-2-git-send-email-nbd@openwrt.org \
--to=nbd@openwrt.org \
--cc=jouni.malinen@atheros.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=lrodriguez@atheros.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).