* [PATCH] ath9k_hw: fix dual band assumption for XB113
@ 2011-05-11 21:57 Luis R. Rodriguez
0 siblings, 0 replies; only message in thread
From: Luis R. Rodriguez @ 2011-05-11 21:57 UTC (permalink / raw)
To: linville
Cc: linux-wireless, Luis R. Rodriguez, stable, Fiona Cain, Ray Li,
Kathy Giori, Aeolus Yang, Dan Friedman
The XB113 cards are single band, 5 GHz-only, but the
default settings were configured to assume it was dual
band. Users of these cards then would see 2.4 GHz channels
but you would never get any scan results from these channels
given that the radio is not present.
Cc: stable@kernel.org
Cc: Fiona Cain <Fiona.Cain@atheros.com>
Cc: Ray Li <ray.li@greenwavereality.com>
Cc: Kathy Giori <kathy.giori@atheros.com>
Cc: Aeolus Yang <aeolus.yang@atheros.com>
Cc: Dan Friedman <dan.friedman@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
---
drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index 3b13c1b..c35a68d 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -652,7 +652,7 @@ static const struct ar9300_eeprom ar9300_x113 = {
.regDmn = { LE16(0), LE16(0x1f) },
.txrxMask = 0x77, /* 4 bits tx and 4 bits rx */
.opCapFlags = {
- .opFlags = AR5416_OPFLAGS_11G | AR5416_OPFLAGS_11A,
+ .opFlags = AR5416_OPFLAGS_11A,
.eepMisc = 0,
},
.rfSilent = 0,
--
1.7.4.15.g7811d
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2011-05-11 21:57 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-05-11 21:57 [PATCH] ath9k_hw: fix dual band assumption for XB113 Luis R. Rodriguez
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).