From: Eliad Peller <eliad@wizery.com>
To: Luciano Coelho <coelho@ti.com>
Cc: <linux-wireless@vger.kernel.org>
Subject: [PATCH v2 4/6] wl12xx: prevent scheduling while suspending (WoW enabled)
Date: Fri, 13 May 2011 11:57:11 +0300 [thread overview]
Message-ID: <1305277033-6662-5-git-send-email-eliad@wizery.com> (raw)
In-Reply-To: <1305277033-6662-1-git-send-email-eliad@wizery.com>
When WoW is enabled, the interface will stay up and the chip will
be powered on, so we have to flush/cancel any remaining work, and
prevent the irq handler from scheduling a new work until the system
is resumed.
Add 2 new flags:
* WL1271_FLAG_SUSPENDED - the system is (about to be) suspended.
* WL1271_FLAG_PENDING_WORK - there is a pending irq work which
should be scheduled when the system is being resumed.
In order to wake-up the system while getting an irq, we initialize
the device as wakeup device, and calling pm_wakeup_event() upon
getting the interrupt (while the system is about to be suspended)
Signed-off-by: Eliad Peller <eliad@wizery.com>
---
v1->v2:
change wl1271_hardirq flow when returning IRQ_HANDLED
drivers/net/wireless/wl12xx/main.c | 46 ++++++++++++++++++++++++++++++++++
drivers/net/wireless/wl12xx/sdio.c | 24 +++++++++++++++++
drivers/net/wireless/wl12xx/wl12xx.h | 2 +
3 files changed, 72 insertions(+), 0 deletions(-)
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 9ca71ce..308855a 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -1338,6 +1338,28 @@ static int wl1271_op_suspend(struct ieee80211_hw *hw,
struct wl1271 *wl = hw->priv;
wl1271_debug(DEBUG_MAC80211, "mac80211 suspend wow=%d", !!wow);
wl->wow_enabled = !!wow;
+ if (wl->wow_enabled) {
+ /* flush any remaining work */
+ wl1271_debug(DEBUG_MAC80211, "flushing remaining works");
+ flush_delayed_work(&wl->scan_complete_work);
+
+ /*
+ * disable and re-enable interrupts in order to flush
+ * the threaded_irq
+ */
+ wl1271_disable_interrupts(wl);
+
+ /*
+ * set suspended flag to avoid triggering a new threaded_irq
+ * work. no need for spinlock as interrupts are disabled.
+ */
+ set_bit(WL1271_FLAG_SUSPENDED, &wl->flags);
+
+ wl1271_enable_interrupts(wl);
+ flush_work(&wl->tx_work);
+ flush_delayed_work(&wl->pspoll_work);
+ flush_delayed_work(&wl->elp_work);
+ }
return 0;
}
@@ -1346,6 +1368,30 @@ static int wl1271_op_resume(struct ieee80211_hw *hw)
struct wl1271 *wl = hw->priv;
wl1271_debug(DEBUG_MAC80211, "mac80211 resume wow=%d",
wl->wow_enabled);
+
+ /*
+ * re-enable irq_work enqueuing, and call irq_work directly if
+ * there is a pending work.
+ */
+ if (wl->wow_enabled) {
+ struct wl1271 *wl = hw->priv;
+ unsigned long flags;
+ bool run_irq_work = false;
+
+ spin_lock_irqsave(&wl->wl_lock, flags);
+ clear_bit(WL1271_FLAG_SUSPENDED, &wl->flags);
+ if (test_and_clear_bit(WL1271_FLAG_PENDING_WORK, &wl->flags))
+ run_irq_work = true;
+ spin_unlock_irqrestore(&wl->wl_lock, flags);
+
+ if (run_irq_work) {
+ wl1271_debug(DEBUG_MAC80211,
+ "run postponed irq_work directly");
+ wl1271_irq(0, wl);
+ wl1271_enable_interrupts(wl);
+ }
+ }
+
return 0;
}
diff --git a/drivers/net/wireless/wl12xx/sdio.c b/drivers/net/wireless/wl12xx/sdio.c
index 5b03fd5..41183db 100644
--- a/drivers/net/wireless/wl12xx/sdio.c
+++ b/drivers/net/wireless/wl12xx/sdio.c
@@ -82,6 +82,16 @@ static irqreturn_t wl1271_hardirq(int irq, void *cookie)
complete(wl->elp_compl);
wl->elp_compl = NULL;
}
+
+ if (test_bit(WL1271_FLAG_SUSPENDED, &wl->flags)) {
+ /* don't enqueue a work right now. mark it as pending */
+ set_bit(WL1271_FLAG_PENDING_WORK, &wl->flags);
+ wl1271_debug(DEBUG_IRQ, "should not enqueue work");
+ disable_irq_nosync(wl->irq);
+ pm_wakeup_event(wl1271_sdio_wl_to_dev(wl), 0);
+ spin_unlock_irqrestore(&wl->wl_lock, flags);
+ return IRQ_HANDLED;
+ }
spin_unlock_irqrestore(&wl->wl_lock, flags);
return IRQ_WAKE_THREAD;
@@ -268,6 +278,7 @@ static int __devinit wl1271_probe(struct sdio_func *func,
}
enable_irq_wake(wl->irq);
+ device_init_wakeup(wl1271_sdio_wl_to_dev(wl), 1);
disable_irq(wl->irq);
@@ -305,6 +316,7 @@ static void __devexit wl1271_remove(struct sdio_func *func)
pm_runtime_get_noresume(&func->dev);
wl1271_unregister_hw(wl);
+ device_init_wakeup(wl1271_sdio_wl_to_dev(wl), 0);
disable_irq_wake(wl->irq);
free_irq(wl->irq, wl);
wl1271_free_hw(wl);
@@ -339,6 +351,9 @@ static int wl1271_suspend(struct device *dev)
wl1271_error("error while trying to keep power");
goto out;
}
+
+ /* release host */
+ sdio_release_host(func);
}
out:
return ret;
@@ -346,6 +361,15 @@ out:
static int wl1271_resume(struct device *dev)
{
+ struct sdio_func *func = dev_to_sdio_func(dev);
+ struct wl1271 *wl = sdio_get_drvdata(func);
+
+ wl1271_debug(DEBUG_MAC80211, "wl1271 resume");
+ if (wl->wow_enabled) {
+ /* claim back host */
+ sdio_claim_host(func);
+ }
+
return 0;
}
diff --git a/drivers/net/wireless/wl12xx/wl12xx.h b/drivers/net/wireless/wl12xx/wl12xx.h
index f9d0a14..daf941d 100644
--- a/drivers/net/wireless/wl12xx/wl12xx.h
+++ b/drivers/net/wireless/wl12xx/wl12xx.h
@@ -358,6 +358,8 @@ enum wl12xx_flags {
WL1271_FLAG_AP_STARTED,
WL1271_FLAG_IF_INITIALIZED,
WL1271_FLAG_DUMMY_PACKET_PENDING,
+ WL1271_FLAG_SUSPENDED,
+ WL1271_FLAG_PENDING_WORK,
};
struct wl1271_link {
--
1.7.0.4
next prev parent reply other threads:[~2011-05-13 8:57 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-13 8:57 [PATCH v2 0/6] wl12xx: add initial wowlan support Eliad Peller
2011-05-13 8:57 ` [PATCH v2 1/6] wl12xx_sdio: set interrupt as wake_up interrupt Eliad Peller
2011-05-13 8:57 ` [PATCH v2 2/6] wl12xx: declare suspend/resume callbacks (for wowlan) Eliad Peller
2011-05-13 8:57 ` [PATCH v2 3/6] wl12xx_sdio: set MMC_PM_KEEP_POWER flag on suspend Eliad Peller
2011-05-13 8:57 ` Eliad Peller [this message]
2011-05-13 8:57 ` [PATCH v2 5/6] wl12xx_sdio: declare support for NL80211_WOW_TRIGGER_ANYTHING trigger Eliad Peller
2011-05-13 8:57 ` [PATCH v2 6/6] wl12xx: enter/exit psm on wowlan suspend/resume Eliad Peller
2011-05-13 12:14 ` [PATCH v2 0/6] wl12xx: add initial wowlan support Luciano Coelho
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1305277033-6662-5-git-send-email-eliad@wizery.com \
--to=eliad@wizery.com \
--cc=coelho@ti.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).