From: Wey-Yi Guy <wey-yi.w.guy@intel.com>
To: linville@tuxdriver.com
Cc: linux-wireless@vger.kernel.org,
ipw3945-devel@lists.sourceforge.net,
Johannes Berg <johannes.berg@intel.com>,
Wey-Yi Guy <wey-yi.w.guy@intel.com>
Subject: [PATCH 11/13] iwlagn: remove set but unused vars
Date: Fri, 13 May 2011 12:13:28 -0700 [thread overview]
Message-ID: <1305314010-18073-12-git-send-email-wey-yi.w.guy@intel.com> (raw)
In-Reply-To: <1305314010-18073-1-git-send-email-wey-yi.w.guy@intel.com>
From: Johannes Berg <johannes.berg@intel.com>
gcc is warning that a few variables in rate
scaling are set but never otherwise used.
This pointed out a few simplifications.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
---
drivers/net/wireless/iwlwifi/iwl-agn-rs.c | 28 ++++++++++------------------
drivers/net/wireless/iwlwifi/iwl-eeprom.c | 7 +++----
2 files changed, 13 insertions(+), 22 deletions(-)
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
index 432f839..c38ba7c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
@@ -2199,11 +2199,11 @@ static void rs_stay_in_table(struct iwl_lq_sta *lq_sta, bool force_search)
* setup rate table in uCode
* return rate_n_flags as used in the table
*/
-static u32 rs_update_rate_tbl(struct iwl_priv *priv,
- struct iwl_rxon_context *ctx,
- struct iwl_lq_sta *lq_sta,
- struct iwl_scale_tbl_info *tbl,
- int index, u8 is_green)
+static void rs_update_rate_tbl(struct iwl_priv *priv,
+ struct iwl_rxon_context *ctx,
+ struct iwl_lq_sta *lq_sta,
+ struct iwl_scale_tbl_info *tbl,
+ int index, u8 is_green)
{
u32 rate;
@@ -2211,8 +2211,6 @@ static u32 rs_update_rate_tbl(struct iwl_priv *priv,
rate = rate_n_flags_from_tbl(priv, tbl, index, is_green);
rs_fill_link_cmd(priv, lq_sta, rate);
iwl_send_lq_cmd(priv, ctx, &lq_sta->lq, CMD_ASYNC, false);
-
- return rate;
}
/*
@@ -2241,7 +2239,6 @@ static void rs_rate_scale_perform(struct iwl_priv *priv,
u8 update_lq = 0;
struct iwl_scale_tbl_info *tbl, *tbl1;
u16 rate_scale_index_msk = 0;
- u32 rate;
u8 is_green = 0;
u8 active_tbl = 0;
u8 done_search = 0;
@@ -2328,8 +2325,8 @@ static void rs_rate_scale_perform(struct iwl_priv *priv,
tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
/* get "active" rate info */
index = iwl_hwrate_to_plcp_idx(tbl->current_rate);
- rate = rs_update_rate_tbl(priv, ctx, lq_sta,
- tbl, index, is_green);
+ rs_update_rate_tbl(priv, ctx, lq_sta, tbl,
+ index, is_green);
}
return;
}
@@ -2570,8 +2567,7 @@ static void rs_rate_scale_perform(struct iwl_priv *priv,
lq_update:
/* Replace uCode's rate table for the destination station. */
if (update_lq)
- rate = rs_update_rate_tbl(priv, ctx, lq_sta,
- tbl, index, is_green);
+ rs_update_rate_tbl(priv, ctx, lq_sta, tbl, index, is_green);
if (iwl_tx_ant_restriction(priv) == IWL_ANT_OK_MULTI) {
/* Should we stay with this modulation mode,
@@ -3270,14 +3266,10 @@ static const struct file_operations rs_sta_dbgfs_stats_table_ops = {
static ssize_t rs_sta_dbgfs_rate_scale_data_read(struct file *file,
char __user *user_buf, size_t count, loff_t *ppos)
{
- char buff[120];
- int desc = 0;
-
struct iwl_lq_sta *lq_sta = file->private_data;
- struct iwl_priv *priv;
struct iwl_scale_tbl_info *tbl = &lq_sta->lq_info[lq_sta->active_tbl];
-
- priv = lq_sta->drv;
+ char buff[120];
+ int desc = 0;
if (is_Ht(tbl->lq_type))
desc += sprintf(buff+desc,
diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.c b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
index c839796..47a56bc 100644
--- a/drivers/net/wireless/iwlwifi/iwl-eeprom.c
+++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
@@ -216,15 +216,14 @@ static int iwl_eeprom_verify_signature(struct iwl_priv *priv)
static void iwl_set_otp_access(struct iwl_priv *priv, enum iwl_access_mode mode)
{
- u32 otpgp;
+ iwl_read32(priv, CSR_OTP_GP_REG);
- otpgp = iwl_read32(priv, CSR_OTP_GP_REG);
if (mode == IWL_OTP_ACCESS_ABSOLUTE)
iwl_clear_bit(priv, CSR_OTP_GP_REG,
- CSR_OTP_GP_REG_OTP_ACCESS_MODE);
+ CSR_OTP_GP_REG_OTP_ACCESS_MODE);
else
iwl_set_bit(priv, CSR_OTP_GP_REG,
- CSR_OTP_GP_REG_OTP_ACCESS_MODE);
+ CSR_OTP_GP_REG_OTP_ACCESS_MODE);
}
static int iwlcore_get_nvm_type(struct iwl_priv *priv, u32 hw_rev)
--
1.7.0.4
next prev parent reply other threads:[~2011-05-13 19:38 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-13 19:13 [PATCH 00/13] update for 2.6.40 Wey-Yi Guy
2011-05-13 19:13 ` [PATCH 01/13] iwlagn: prepare for multi-TB commands Wey-Yi Guy
2011-05-13 19:13 ` [PATCH 02/13] iwlagn: clean up TXQ indirection Wey-Yi Guy
2011-05-13 19:13 ` [PATCH 03/13] iwlagn: remove unused pad argument Wey-Yi Guy
2011-05-13 19:13 ` [PATCH 04/13] iwlagn: support multiple TBs per command Wey-Yi Guy
2011-05-13 19:13 ` [PATCH 05/13] iwlagn: more ucode error log info Wey-Yi Guy
2011-05-13 19:13 ` [PATCH 06/13] iwlagn: add testmode trace command Wey-Yi Guy
2011-05-13 19:13 ` [PATCH 07/13] iwlagn: add eeprom command to testmode Wey-Yi Guy
2011-05-13 19:13 ` [PATCH 08/13] iwlagn: add testmode set fixed rate command Wey-Yi Guy
2011-05-13 19:13 ` [PATCH 09/13] iwlagn: clear STATUS_HCMD_ACTIVE bit if fail enqueue Wey-Yi Guy
2011-05-13 19:13 ` [PATCH 10/13] iwlagn: always send RXON with disassociate flag before associate Wey-Yi Guy
2011-05-13 19:13 ` Wey-Yi Guy [this message]
2011-05-13 19:13 ` [PATCH 12/13] iwlagn: change default beacon interval Wey-Yi Guy
2011-05-13 19:13 ` [PATCH 13/13] iwlagn: remove unused old_assoc parameter Wey-Yi Guy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1305314010-18073-12-git-send-email-wey-yi.w.guy@intel.com \
--to=wey-yi.w.guy@intel.com \
--cc=ipw3945-devel@lists.sourceforge.net \
--cc=johannes.berg@intel.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).