From: "Roland Vossen" <rvossen@broadcom.com>
To: gregkh@suse.de
Cc: devel@linuxdriverproject.org, linux-wireless@vger.kernel.org
Subject: [PATCH 70/83] staging: brcm80211: moved register read/write macro's
Date: Wed, 1 Jun 2011 13:45:55 +0200 [thread overview]
Message-ID: <1306928768-7501-70-git-send-email-rvossen@broadcom.com> (raw)
In-Reply-To: <1306928768-7501-1-git-send-email-rvossen@broadcom.com>
Code cleanup. R_REG()/W_REG() macro's are overly complex. Copied
the macro's to both fullmac and softmac. Next patches will simplify
both copies of the macro's.
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
---
drivers/staging/brcm80211/brcmfmac/bcmsdh_linux.c | 1 +
drivers/staging/brcm80211/brcmfmac/bcmsdh_sdmmc.c | 1 +
.../brcm80211/brcmfmac/bcmsdh_sdmmc_linux.c | 1 +
drivers/staging/brcm80211/brcmfmac/dhd_sdio.c | 126 ++++++++++++++++++++
drivers/staging/brcm80211/brcmsmac/aiutils.c | 1 +
drivers/staging/brcm80211/brcmsmac/bcmotp.c | 1 +
drivers/staging/brcm80211/brcmsmac/nicpci.c | 1 +
drivers/staging/brcm80211/brcmsmac/wlc_pmu.c | 1 +
drivers/staging/brcm80211/brcmsmac/wlc_types.h | 123 +++++++++++++++++++
drivers/staging/brcm80211/include/brcmu_utils.h | 123 -------------------
10 files changed, 256 insertions(+), 123 deletions(-)
diff --git a/drivers/staging/brcm80211/brcmfmac/bcmsdh_linux.c b/drivers/staging/brcm80211/brcmfmac/bcmsdh_linux.c
index e7638f4..5812b5b 100644
--- a/drivers/staging/brcm80211/brcmfmac/bcmsdh_linux.c
+++ b/drivers/staging/brcm80211/brcmfmac/bcmsdh_linux.c
@@ -28,6 +28,7 @@
#include <bcmdefs.h>
#include <bcmdevs.h>
#include <brcmu_utils.h>
+#include <bcmsdh.h>
#include <brcmu_wifi.h>
#if defined(OOB_INTR_ONLY)
diff --git a/drivers/staging/brcm80211/brcmfmac/bcmsdh_sdmmc.c b/drivers/staging/brcm80211/brcmfmac/bcmsdh_sdmmc.c
index 8dadfb6..9abd620 100644
--- a/drivers/staging/brcm80211/brcmfmac/bcmsdh_sdmmc.c
+++ b/drivers/staging/brcm80211/brcmfmac/bcmsdh_sdmmc.c
@@ -20,6 +20,7 @@
#include <bcmdevs.h>
#include <brcmu_utils.h>
#include <brcmu_wifi.h>
+#include <bcmsdh.h>
#include <bcmsdbus.h> /* bcmsdh to/from specific controller APIs */
#include <sdiovar.h> /* ioctl/iovars */
diff --git a/drivers/staging/brcm80211/brcmfmac/bcmsdh_sdmmc_linux.c b/drivers/staging/brcm80211/brcmfmac/bcmsdh_sdmmc_linux.c
index e1b2592..2da07e2 100644
--- a/drivers/staging/brcm80211/brcmfmac/bcmsdh_sdmmc_linux.c
+++ b/drivers/staging/brcm80211/brcmfmac/bcmsdh_sdmmc_linux.c
@@ -20,6 +20,7 @@
#include <bcmdefs.h>
#include <brcmu_utils.h>
#include <brcmu_wifi.h>
+#include <bcmsdh.h>
#include <bcmsdbus.h> /* bcmsdh to/from specific controller APIs */
#include <sdiovar.h> /* to get msglevel bit values */
diff --git a/drivers/staging/brcm80211/brcmfmac/dhd_sdio.c b/drivers/staging/brcm80211/brcmfmac/dhd_sdio.c
index 0bff0ed..8da6589 100644
--- a/drivers/staging/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/staging/brcm80211/brcmfmac/dhd_sdio.c
@@ -30,6 +30,132 @@
#include <bcmdevs.h>
#include <bcmsoc.h>
+
+/* register access macros */
+#if defined(BCMSDIO)
+#ifdef BRCM_FULLMAC
+#include <bcmsdh.h>
+#endif
+#endif
+
+#if defined(BCMSDIO)
+#define SELECT_BUS_WRITE(mmap_op, bus_op) bus_op
+#define SELECT_BUS_READ(mmap_op, bus_op) bus_op
+#else
+#define SELECT_BUS_WRITE(mmap_op, bus_op) mmap_op
+#define SELECT_BUS_READ(mmap_op, bus_op) mmap_op
+#endif
+
+/* register access macros */
+#ifndef __BIG_ENDIAN
+#ifndef __mips__
+#define R_REG(r) (\
+ SELECT_BUS_READ(sizeof(*(r)) == sizeof(u8) ? \
+ readb((volatile u8*)(r)) : \
+ sizeof(*(r)) == sizeof(u16) ? readw((volatile u16*)(r)) : \
+ readl((volatile u32*)(r)), bcmsdh_reg_read(NULL, (unsigned long)r, sizeof(*r))) \
+)
+#else /* __mips__ */
+#define R_REG(r) (\
+ SELECT_BUS_READ( \
+ ({ \
+ __typeof(*(r)) __osl_v; \
+ __asm__ __volatile__("sync"); \
+ switch (sizeof(*(r))) { \
+ case sizeof(u8): \
+ __osl_v = readb((volatile u8*)(r)); \
+ break; \
+ case sizeof(u16): \
+ __osl_v = readw((volatile u16*)(r)); \
+ break; \
+ case sizeof(u32): \
+ __osl_v = \
+ readl((volatile u32*)(r)); \
+ break; \
+ } \
+ __asm__ __volatile__("sync"); \
+ __osl_v; \
+ }), \
+ ({ \
+ __typeof(*(r)) __osl_v; \
+ __asm__ __volatile__("sync"); \
+ __osl_v = bcmsdh_reg_read(NULL, (unsigned long)r, sizeof(*r)); \
+ __asm__ __volatile__("sync"); \
+ __osl_v; \
+ })) \
+)
+#endif /* __mips__ */
+
+#define W_REG(r, v) do { \
+ SELECT_BUS_WRITE( \
+ switch (sizeof(*(r))) { \
+ case sizeof(u8): \
+ writeb((u8)(v), (volatile u8*)(r)); break; \
+ case sizeof(u16): \
+ writew((u16)(v), (volatile u16*)(r)); break; \
+ case sizeof(u32): \
+ writel((u32)(v), (volatile u32*)(r)); break; \
+ }, \
+ bcmsdh_reg_write(NULL, (unsigned long)r, sizeof(*r), (v))); \
+ } while (0)
+#else /* __BIG_ENDIAN */
+#define R_REG(r) (\
+ SELECT_BUS_READ( \
+ ({ \
+ __typeof(*(r)) __osl_v; \
+ switch (sizeof(*(r))) { \
+ case sizeof(u8): \
+ __osl_v = \
+ readb((volatile u8*)((r)^3)); \
+ break; \
+ case sizeof(u16): \
+ __osl_v = \
+ readw((volatile u16*)((r)^2)); \
+ break; \
+ case sizeof(u32): \
+ __osl_v = readl((volatile u32*)(r)); \
+ break; \
+ } \
+ __osl_v; \
+ }), \
+ bcmsdh_reg_read(NULL, (unsigned long)r, sizeof(*r))) \
+)
+#define W_REG(r, v) do { \
+ SELECT_BUS_WRITE( \
+ switch (sizeof(*(r))) { \
+ case sizeof(u8): \
+ writeb((u8)(v), \
+ (volatile u8*)((r)^3)); break; \
+ case sizeof(u16): \
+ writew((u16)(v), \
+ (volatile u16*)((r)^2)); break; \
+ case sizeof(u32): \
+ writel((u32)(v), \
+ (volatile u32*)(r)); break; \
+ }, \
+ bcmsdh_reg_write(NULL, (unsigned long)r, sizeof(*r), v)); \
+ } while (0)
+#endif /* __BIG_ENDIAN */
+
+#ifdef __mips__
+/*
+ * bcm4716 (which includes 4717 & 4718), plus 4706 on PCIe can reorder
+ * transactions. As a fix, a read after write is performed on certain places
+ * in the code. Older chips and the newer 5357 family don't require this fix.
+ */
+#define W_REG_FLUSH(r, v) ({ W_REG((r), (v)); (void)R_REG(r); })
+#else
+#define W_REG_FLUSH(r, v) W_REG((r), (v))
+#endif /* __mips__ */
+
+#define AND_REG(r, v) W_REG((r), R_REG(r) & (v))
+#define OR_REG(r, v) W_REG((r), R_REG(r) | (v))
+
+#define SET_REG(r, mask, val) \
+ W_REG((r), ((R_REG(r) & ~(mask)) | (val)))
+
+
+
#ifdef DHD_DEBUG
/* ARM trap handling */
diff --git a/drivers/staging/brcm80211/brcmsmac/aiutils.c b/drivers/staging/brcm80211/brcmsmac/aiutils.c
index bc1c52d..7a8bab7 100644
--- a/drivers/staging/brcm80211/brcmsmac/aiutils.c
+++ b/drivers/staging/brcm80211/brcmsmac/aiutils.c
@@ -18,6 +18,7 @@
#include <linux/kernel.h>
#include <linux/string.h>
#include <bcmdefs.h>
+#include "wlc_types.h"
#include <linux/module.h>
#include <linux/pci.h>
#include <brcmu_utils.h>
diff --git a/drivers/staging/brcm80211/brcmsmac/bcmotp.c b/drivers/staging/brcm80211/brcmsmac/bcmotp.c
index 4a0deec..baed204 100644
--- a/drivers/staging/brcm80211/brcmsmac/bcmotp.c
+++ b/drivers/staging/brcm80211/brcmsmac/bcmotp.c
@@ -23,6 +23,7 @@
#include <bcmdefs.h>
#include <bcmdevs.h>
+#include "wlc_types.h"
#include <brcmu_utils.h>
#include <aiutils.h>
#include <bcmsoc.h>
diff --git a/drivers/staging/brcm80211/brcmsmac/nicpci.c b/drivers/staging/brcm80211/brcmsmac/nicpci.c
index 6e61ca1..3ffad2e 100644
--- a/drivers/staging/brcm80211/brcmsmac/nicpci.c
+++ b/drivers/staging/brcm80211/brcmsmac/nicpci.c
@@ -18,6 +18,7 @@
#include <linux/string.h>
#include <linux/pci.h>
#include <bcmdefs.h>
+#include "wlc_types.h"
#include <brcmu_utils.h>
#include <aiutils.h>
#include <bcmsoc.h>
diff --git a/drivers/staging/brcm80211/brcmsmac/wlc_pmu.c b/drivers/staging/brcm80211/brcmsmac/wlc_pmu.c
index f10a137..720839b 100644
--- a/drivers/staging/brcm80211/brcmsmac/wlc_pmu.c
+++ b/drivers/staging/brcm80211/brcmsmac/wlc_pmu.c
@@ -19,6 +19,7 @@
#include <linux/io.h>
#include <bcmdevs.h>
+#include "wlc_types.h"
#include <chipcommon.h>
#include <brcmu_utils.h>
#include "wlc_scb.h"
diff --git a/drivers/staging/brcm80211/brcmsmac/wlc_types.h b/drivers/staging/brcm80211/brcmsmac/wlc_types.h
index 3442d32..12c35bd 100644
--- a/drivers/staging/brcm80211/brcmsmac/wlc_types.h
+++ b/drivers/staging/brcm80211/brcmsmac/wlc_types.h
@@ -41,6 +41,129 @@ do { \
#define WL_ERROR_ON() (brcm_msg_level & LOG_ERROR_VAL)
+/* register access macros */
+#if defined(BCMSDIO)
+#ifdef BRCM_FULLMAC
+#include <bcmsdh.h>
+#endif
+#endif
+
+#if defined(BCMSDIO)
+#define SELECT_BUS_WRITE(mmap_op, bus_op) bus_op
+#define SELECT_BUS_READ(mmap_op, bus_op) bus_op
+#else
+#define SELECT_BUS_WRITE(mmap_op, bus_op) mmap_op
+#define SELECT_BUS_READ(mmap_op, bus_op) mmap_op
+#endif
+
+/* register access macros */
+#ifndef __BIG_ENDIAN
+#ifndef __mips__
+#define R_REG(r) (\
+ SELECT_BUS_READ(sizeof(*(r)) == sizeof(u8) ? \
+ readb((volatile u8*)(r)) : \
+ sizeof(*(r)) == sizeof(u16) ? readw((volatile u16*)(r)) : \
+ readl((volatile u32*)(r)), bcmsdh_reg_read(NULL, (unsigned long)r, sizeof(*r))) \
+)
+#else /* __mips__ */
+#define R_REG(r) (\
+ SELECT_BUS_READ( \
+ ({ \
+ __typeof(*(r)) __osl_v; \
+ __asm__ __volatile__("sync"); \
+ switch (sizeof(*(r))) { \
+ case sizeof(u8): \
+ __osl_v = readb((volatile u8*)(r)); \
+ break; \
+ case sizeof(u16): \
+ __osl_v = readw((volatile u16*)(r)); \
+ break; \
+ case sizeof(u32): \
+ __osl_v = \
+ readl((volatile u32*)(r)); \
+ break; \
+ } \
+ __asm__ __volatile__("sync"); \
+ __osl_v; \
+ }), \
+ ({ \
+ __typeof(*(r)) __osl_v; \
+ __asm__ __volatile__("sync"); \
+ __osl_v = bcmsdh_reg_read(NULL, (unsigned long)r, sizeof(*r)); \
+ __asm__ __volatile__("sync"); \
+ __osl_v; \
+ })) \
+)
+#endif /* __mips__ */
+
+#define W_REG(r, v) do { \
+ SELECT_BUS_WRITE( \
+ switch (sizeof(*(r))) { \
+ case sizeof(u8): \
+ writeb((u8)(v), (volatile u8*)(r)); break; \
+ case sizeof(u16): \
+ writew((u16)(v), (volatile u16*)(r)); break; \
+ case sizeof(u32): \
+ writel((u32)(v), (volatile u32*)(r)); break; \
+ }, \
+ bcmsdh_reg_write(NULL, (unsigned long)r, sizeof(*r), (v))); \
+ } while (0)
+#else /* __BIG_ENDIAN */
+#define R_REG(r) (\
+ SELECT_BUS_READ( \
+ ({ \
+ __typeof(*(r)) __osl_v; \
+ switch (sizeof(*(r))) { \
+ case sizeof(u8): \
+ __osl_v = \
+ readb((volatile u8*)((r)^3)); \
+ break; \
+ case sizeof(u16): \
+ __osl_v = \
+ readw((volatile u16*)((r)^2)); \
+ break; \
+ case sizeof(u32): \
+ __osl_v = readl((volatile u32*)(r)); \
+ break; \
+ } \
+ __osl_v; \
+ }), \
+ bcmsdh_reg_read(NULL, (unsigned long)r, sizeof(*r))) \
+)
+#define W_REG(r, v) do { \
+ SELECT_BUS_WRITE( \
+ switch (sizeof(*(r))) { \
+ case sizeof(u8): \
+ writeb((u8)(v), \
+ (volatile u8*)((r)^3)); break; \
+ case sizeof(u16): \
+ writew((u16)(v), \
+ (volatile u16*)((r)^2)); break; \
+ case sizeof(u32): \
+ writel((u32)(v), \
+ (volatile u32*)(r)); break; \
+ }, \
+ bcmsdh_reg_write(NULL, (unsigned long)r, sizeof(*r), v)); \
+ } while (0)
+#endif /* __BIG_ENDIAN */
+
+#ifdef __mips__
+/*
+ * bcm4716 (which includes 4717 & 4718), plus 4706 on PCIe can reorder
+ * transactions. As a fix, a read after write is performed on certain places
+ * in the code. Older chips and the newer 5357 family don't require this fix.
+ */
+#define W_REG_FLUSH(r, v) ({ W_REG((r), (v)); (void)R_REG(r); })
+#else
+#define W_REG_FLUSH(r, v) W_REG((r), (v))
+#endif /* __mips__ */
+
+#define AND_REG(r, v) W_REG((r), R_REG(r) & (v))
+#define OR_REG(r, v) W_REG((r), R_REG(r) | (v))
+
+#define SET_REG(r, mask, val) \
+ W_REG((r), ((R_REG(r) & ~(mask)) | (val)))
+
/* forward declarations */
struct sk_buff;
struct brcms_info;
diff --git a/drivers/staging/brcm80211/include/brcmu_utils.h b/drivers/staging/brcm80211/include/brcmu_utils.h
index 260d0b6..94ae604 100644
--- a/drivers/staging/brcm80211/include/brcmu_utils.h
+++ b/drivers/staging/brcm80211/include/brcmu_utils.h
@@ -235,21 +235,6 @@ extern int brcmu_iovar_lencheck(const struct brcmu_iovar *table, void *arg,
#define REG_MAP(pa, size) (void *)(0)
#endif
-/* register access macros */
-#if defined(BCMSDIO)
-#ifdef BRCM_FULLMAC
-#include <bcmsdh.h>
-#endif
-#endif
-
-#if defined(BCMSDIO)
-#define SELECT_BUS_WRITE(mmap_op, bus_op) bus_op
-#define SELECT_BUS_READ(mmap_op, bus_op) bus_op
-#else
-#define SELECT_BUS_WRITE(mmap_op, bus_op) mmap_op
-#define SELECT_BUS_READ(mmap_op, bus_op) mmap_op
-#endif
-
/* the largest reasonable packet buffer driver uses for ethernet MTU in bytes */
#define PKTBUFSZ 2048
@@ -259,114 +244,6 @@ extern int brcmu_iovar_lencheck(const struct brcmu_iovar *table, void *arg,
#include <linux/string.h> /* for mem*, str* */
#endif
-/* register access macros */
-#ifndef __BIG_ENDIAN
-#ifndef __mips__
-#define R_REG(r) (\
- SELECT_BUS_READ(sizeof(*(r)) == sizeof(u8) ? \
- readb((volatile u8*)(r)) : \
- sizeof(*(r)) == sizeof(u16) ? readw((volatile u16*)(r)) : \
- readl((volatile u32*)(r)), bcmsdh_reg_read(NULL, (unsigned long)r, sizeof(*r))) \
-)
-#else /* __mips__ */
-#define R_REG(r) (\
- SELECT_BUS_READ( \
- ({ \
- __typeof(*(r)) __osl_v; \
- __asm__ __volatile__("sync"); \
- switch (sizeof(*(r))) { \
- case sizeof(u8): \
- __osl_v = readb((volatile u8*)(r)); \
- break; \
- case sizeof(u16): \
- __osl_v = readw((volatile u16*)(r)); \
- break; \
- case sizeof(u32): \
- __osl_v = \
- readl((volatile u32*)(r)); \
- break; \
- } \
- __asm__ __volatile__("sync"); \
- __osl_v; \
- }), \
- ({ \
- __typeof(*(r)) __osl_v; \
- __asm__ __volatile__("sync"); \
- __osl_v = bcmsdh_reg_read(NULL, (unsigned long)r, sizeof(*r)); \
- __asm__ __volatile__("sync"); \
- __osl_v; \
- })) \
-)
-#endif /* __mips__ */
-
-#define W_REG(r, v) do { \
- SELECT_BUS_WRITE( \
- switch (sizeof(*(r))) { \
- case sizeof(u8): \
- writeb((u8)(v), (volatile u8*)(r)); break; \
- case sizeof(u16): \
- writew((u16)(v), (volatile u16*)(r)); break; \
- case sizeof(u32): \
- writel((u32)(v), (volatile u32*)(r)); break; \
- }, \
- bcmsdh_reg_write(NULL, (unsigned long)r, sizeof(*r), (v))); \
- } while (0)
-#else /* __BIG_ENDIAN */
-#define R_REG(r) (\
- SELECT_BUS_READ( \
- ({ \
- __typeof(*(r)) __osl_v; \
- switch (sizeof(*(r))) { \
- case sizeof(u8): \
- __osl_v = \
- readb((volatile u8*)((r)^3)); \
- break; \
- case sizeof(u16): \
- __osl_v = \
- readw((volatile u16*)((r)^2)); \
- break; \
- case sizeof(u32): \
- __osl_v = readl((volatile u32*)(r)); \
- break; \
- } \
- __osl_v; \
- }), \
- bcmsdh_reg_read(NULL, (unsigned long)r, sizeof(*r))) \
-)
-#define W_REG(r, v) do { \
- SELECT_BUS_WRITE( \
- switch (sizeof(*(r))) { \
- case sizeof(u8): \
- writeb((u8)(v), \
- (volatile u8*)((r)^3)); break; \
- case sizeof(u16): \
- writew((u16)(v), \
- (volatile u16*)((r)^2)); break; \
- case sizeof(u32): \
- writel((u32)(v), \
- (volatile u32*)(r)); break; \
- }, \
- bcmsdh_reg_write(NULL, (unsigned long)r, sizeof(*r), v)); \
- } while (0)
-#endif /* __BIG_ENDIAN */
-
-#ifdef __mips__
-/*
- * bcm4716 (which includes 4717 & 4718), plus 4706 on PCIe can reorder
- * transactions. As a fix, a read after write is performed on certain places
- * in the code. Older chips and the newer 5357 family don't require this fix.
- */
-#define W_REG_FLUSH(r, v) ({ W_REG((r), (v)); (void)R_REG(r); })
-#else
-#define W_REG_FLUSH(r, v) W_REG((r), (v))
-#endif /* __mips__ */
-
-#define AND_REG(r, v) W_REG((r), R_REG(r) & (v))
-#define OR_REG(r, v) W_REG((r), R_REG(r) | (v))
-
-#define SET_REG(r, mask, val) \
- W_REG((r), ((R_REG(r) & ~(mask)) | (val)))
-
#ifndef setbit
#ifndef NBBY /* the BSD family defines NBBY */
#define NBBY 8 /* 8 bits per byte */
--
1.7.4.1
next prev parent reply other threads:[~2011-06-01 11:46 UTC|newest]
Thread overview: 115+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-01 11:44 [PATCH 01/83] staging: brcm80211: removed unused Broadcom specific ioctls codes Roland Vossen
2011-06-01 11:44 ` [PATCH 02/83] staging: brcm80211: removed iovar layer from softmac Roland Vossen
2011-06-01 11:44 ` [PATCH 03/83] staging: brcm80211: cleanup struct wl_info Roland Vossen
2011-06-01 11:44 ` [PATCH 04/83] staging: brcm80211: removed unused timeout fields in wlc_protection Roland Vossen
2011-06-01 11:44 ` [PATCH 05/83] staging: brcm80211: remove WLC_WATCHDOG_TBTT macro Roland Vossen
2011-06-01 11:44 ` [PATCH 06/83] staging: brcm80211: cleanup struct wlc_info definition Roland Vossen
2011-06-01 11:44 ` [PATCH 07/83] staging: brcm80211: fix compiler warning introduced Roland Vossen
2011-06-01 11:44 ` [PATCH 08/83] staging: brcm80211: replaced #ifdef __mips__ sections by W_REG_FLUSH Roland Vossen
2011-06-01 12:27 ` Jonas Gorski
2011-06-01 17:17 ` Roland Vossen
2011-06-01 11:44 ` [PATCH 09/83] staging: brcm80211: emptied wlioctl.h Roland Vossen
2011-06-01 11:44 ` [PATCH 10/83] staging: brcm80211: removed wlioctl.h and dhdioctl.h Roland Vossen
2011-06-01 11:44 ` [PATCH 11/83] staging: brcm80211: updated MAINTAINERS, README and TODO files Roland Vossen
2011-06-01 11:44 ` [PATCH 12/83] staging: brcm80211: remove iovars IOV_BLOCKMODE Roland Vossen
2011-06-01 11:44 ` [PATCH 13/83] staging: brcm80211: remove iovars IOV_DMA Roland Vossen
2011-06-01 11:44 ` [PATCH 14/83] staging: brcm80211: remove iovars IOV_NUMLOCALINTS Roland Vossen
2011-06-01 11:45 ` [PATCH 15/83] staging: brcm80211: remove iovars IOV_HOSTREG Roland Vossen
2011-06-01 11:45 ` [PATCH 16/83] staging: brcm80211: remove iovars IOV_DIVISOR Roland Vossen
2011-06-01 11:45 ` [PATCH 17/83] staging: brcm80211: remove iovars IOV_POWER Roland Vossen
2011-06-01 11:45 ` [PATCH 18/83] staging: brcm80211: remove iovars IOV_CLOCK Roland Vossen
2011-06-01 11:45 ` [PATCH 19/83] staging: brcm80211: remove iovars IOV_SDMODE Roland Vossen
2011-06-01 11:45 ` [PATCH 20/83] staging: brcm80211: remove iovars IOV_HISPEED Roland Vossen
2011-06-01 11:45 ` [PATCH 21/83] staging: brcm80211: added support for more bcm43224 based boards Roland Vossen
2011-06-01 11:45 ` [PATCH 22/83] staging: brcm80211: removed 'hnd' from filenames Roland Vossen
2011-06-01 11:45 ` [PATCH 23/83] staging: brcm80211: removed 'hnd' from everything but function names Roland Vossen
2011-06-01 11:45 ` [PATCH 24/83] staging: brcm80211: merged two header files into dhd_sdio.c Roland Vossen
2011-06-01 11:45 ` [PATCH 25/83] staging: brcm80211: removed unused stuff from proto/802.11.h Roland Vossen
2011-06-01 11:45 ` [PATCH 26/83] staging: brcm80211: emptied include/802.11.h Roland Vossen
2011-06-01 11:45 ` [PATCH 27/83] staging: brcm80211: removed 802.11.h Roland Vossen
2011-06-01 11:45 ` [PATCH 28/83] staging: brcm80211: cleaned bcmeth.h and bcmevent.h Roland Vossen
2011-06-01 11:45 ` [PATCH 29/83] staging: brcm80211: removed include/proto dir Roland Vossen
2011-06-01 11:45 ` [PATCH 30/83] staging: brcm80211: remove SDIO related definitions from nicpci.h Roland Vossen
2011-06-01 11:45 ` [PATCH 31/83] staging: brcm80211: remove usage of bcmsrom_tbl.h Roland Vossen
2011-06-01 11:45 ` [PATCH 32/83] staging: brcm80211: remove extern variable definitions in bcmsrom.c Roland Vossen
2011-06-01 11:45 ` [PATCH 33/83] staging: brcm80211: remove inclusion of bcmsrom_fmt.h Roland Vossen
2011-06-01 11:45 ` [PATCH 34/83] staging: brcm80211: cleaned sb* header files Roland Vossen
2011-06-01 11:45 ` [PATCH 35/83] staging: brcm80211: moved header files to more specific directory Roland Vossen
2011-06-02 0:08 ` Julian Calaby
2011-06-02 8:32 ` Arend van Spriel
2011-06-02 10:42 ` Julian Calaby
2011-06-01 11:45 ` [PATCH 36/83] staging: brcm80211: cleaned bcmdefs.h Roland Vossen
2011-06-01 11:45 ` [PATCH 37/83] staging: brcm80211: remove usage of pcicfg.h from brcmsmac driver Roland Vossen
2011-06-01 11:45 ` [PATCH 38/83] staging: brcm80211: move PCI related header files to appropriate driver folder Roland Vossen
2011-06-01 23:44 ` Julian Calaby
2011-06-01 11:45 ` [PATCH 39/83] staging: brcm80211: remove functions from nicpci.h Roland Vossen
2011-06-01 11:45 ` [PATCH 40/83] staging: brcm80211: remove unused functions from nicpci.c Roland Vossen
2011-06-01 11:45 ` [PATCH 41/83] staging: brcm80211: add braces to SI_INFO macro definition Roland Vossen
2011-06-01 11:45 ` [PATCH 42/83] staging: brcm80211: remove dependency on pci core difinitions from aiutils.c Roland Vossen
2011-06-01 23:18 ` Julian Calaby
2011-06-02 8:38 ` Arend van Spriel
2011-06-01 11:45 ` [PATCH 43/83] staging: brcm80211: remove pci core defintion files Roland Vossen
2011-06-01 11:45 ` [PATCH 44/83] staging: brcm80211: replaced typedef si_t with struct si_pub Roland Vossen
2011-06-01 23:58 ` Julian Calaby
2011-06-03 16:37 ` Roland Vossen
2011-06-04 0:51 ` Julian Calaby
2011-06-05 8:36 ` Roland Vossen
2011-06-05 9:20 ` Julian Calaby
2011-06-05 19:23 ` julie Sullivan
2011-06-06 1:34 ` Henry Ptasinski
2011-06-06 9:10 ` Roland Vossen
2011-06-06 7:31 ` Roland Vossen
2011-06-06 12:14 ` Julian Calaby
2011-06-08 12:20 ` Roland Vossen
2011-06-01 11:45 ` [PATCH 45/83] staging: brcm80211: deleted sbconfig.h, renamed sbcc.h Roland Vossen
2011-06-01 11:45 ` [PATCH 46/83] staging: brcm80211: moved sbdma.h into brcmsmac/bcmdma.h Roland Vossen
2011-06-01 11:45 ` [PATCH 47/83] staging: brcm80211: macro cleanup Roland Vossen
2011-06-01 11:45 ` [PATCH 48/83] staging: brcm80211: remove phy_version.h Roland Vossen
2011-06-01 11:45 ` [PATCH 49/83] staging: brcm80211: remove BCMEMBEDIMAGE related codes from fullmac Roland Vossen
2011-06-01 11:45 ` [PATCH 50/83] staging: brcm80211: absorb bcmcdc.h into dhd_cdc.c Roland Vossen
2011-06-01 23:37 ` Julian Calaby
2011-06-03 17:50 ` Franky Lin
2011-06-01 11:45 ` [PATCH 51/83] staging: brcm80211: clean up dhd.h in fullmac Roland Vossen
2011-06-01 11:45 ` [PATCH 52/83] staging: brcm80211: absorb bcmsdpcm.h " Roland Vossen
2011-06-01 11:45 ` [PATCH 53/83] staging: brcm80211: absorb msgtrace.h " Roland Vossen
2011-06-01 11:45 ` [PATCH 54/83] staging: brcm80211: combine sbsdpcmdev.h and sbsdio.h Roland Vossen
2011-06-01 23:22 ` Julian Calaby
2011-06-01 11:45 ` [PATCH 55/83] staging: brmc80211: remove sdio.h from fullmac Roland Vossen
2011-06-01 11:45 ` [PATCH 56/83] staging: brcm80211: remove sdioh.h " Roland Vossen
2011-06-01 11:45 ` [PATCH 57/83] staging: brcm80211: clean up wl_cfg80211.h in fullmac Roland Vossen
2011-06-01 11:45 ` [PATCH 58/83] staging: brcm80211: clean up wl_iw.h " Roland Vossen
2011-06-01 11:45 ` [PATCH 59/83] staging: brcm80211: removed wl_ (vendor specific acronym) Roland Vossen
2011-06-01 11:45 ` [PATCH 60/83] staging: brcm80211: renamed files to get rid of wl_ file name prefix Roland Vossen
2011-06-01 11:45 ` [PATCH 61/83] staging: brcm80211: removed wl_dbg.h Roland Vossen
2011-06-01 11:45 ` [PATCH 62/83] staging: brcm80211: removed wl_export.h Roland Vossen
2011-06-01 11:45 ` [PATCH 63/83] staging: brcm80211: removed unused code from bcmotp.c Roland Vossen
2011-06-01 11:45 ` [PATCH 64/83] staging: brcm80211: removed Broadcom specific acronym 'hnd' Roland Vossen
2011-06-01 11:45 ` [PATCH 65/83] staging: brcm80211: removed lmac remnants Roland Vossen
2011-06-01 11:45 ` [PATCH 66/83] staging: brcm80211: cleaned up prefix for utility functions Roland Vossen
2011-06-01 11:45 ` [PATCH 67/83] staging: brcm80211: renamed utility module related files Roland Vossen
2011-06-01 11:45 ` [PATCH 68/83] staging: brcm80211: remove nvram related source files Roland Vossen
2011-06-01 11:45 ` [PATCH 69/83] staging: brcm80211: removed OSL_WRITE_REG and OSL_READ_REG macros Roland Vossen
2011-06-01 11:45 ` Roland Vossen [this message]
2011-06-01 11:45 ` [PATCH 71/83] staging: brcm80211: further simplified register access macro's Roland Vossen
2011-06-02 2:45 ` Julian Calaby
2011-06-03 16:39 ` Roland Vossen
2011-06-01 11:45 ` [PATCH 72/83] staging: brcm80211: cleanup after R_REG/W_REG patches Roland Vossen
2011-06-01 11:45 ` [PATCH 73/83] staging: brcm80211: prepared header files for file rename Roland Vossen
2011-06-01 11:45 ` [PATCH 74/83] staging: brcm80211: renamed files in brcmsmac and include directories Roland Vossen
2011-06-01 11:46 ` [PATCH 75/83] staging: brcm80211: deleted header file include/aidmp.h Roland Vossen
2011-06-01 11:46 ` [PATCH 76/83] staging: brcm80211: cleaned include/brcm_hw_ids.h Roland Vossen
2011-06-01 11:46 ` [PATCH 77/83] staging: brcm80211: moved /include/sdio_host.h to /brcmfmac dir Roland Vossen
2011-06-01 11:46 ` [PATCH 78/83] staging: brcm80211: removed unused definitions from include/soc.h Roland Vossen
2011-06-01 11:46 ` [PATCH 79/83] staging: brcm80211: moved /include/srom.h into /brcmsmac dir Roland Vossen
2011-06-01 11:46 ` [PATCH 80/83] staging: brcm80211: deleted brcmsmac/cfg.h and brcmsmac/bsscfg.h Roland Vossen
2011-06-01 11:46 ` [PATCH 81/83] staging: brcm80211: removed keys.h Roland Vossen
2011-06-01 11:46 ` [PATCH 82/83] staging: brcm80211: renamed file Roland Vossen
2011-06-01 11:46 ` [PATCH 83/83] staging: brcm80211: updated TODO with current state of affairs Roland Vossen
2011-06-01 11:59 ` [PATCH 01/83] staging: brcm80211: removed unused Broadcom specific ioctls codes Rafał Miłecki
2011-06-01 16:23 ` Henry Ptasinski
2011-06-01 16:28 ` Rafał Miłecki
2011-06-02 3:06 ` Julian Calaby
2011-06-03 16:58 ` Roland Vossen
2011-06-04 0:54 ` Julian Calaby
2011-06-03 17:04 ` Henry Ptasinski
2011-06-04 1:00 ` Julian Calaby
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1306928768-7501-70-git-send-email-rvossen@broadcom.com \
--to=rvossen@broadcom.com \
--cc=devel@linuxdriverproject.org \
--cc=gregkh@suse.de \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).