From: "Roland Vossen" <rvossen@broadcom.com>
To: gregkh@suse.de
Cc: devel@linuxdriverproject.org, linux-wireless@vger.kernel.org
Subject: [PATCH 08/83] staging: brcm80211: replaced #ifdef __mips__ sections by W_REG_FLUSH
Date: Wed, 1 Jun 2011 13:44:53 +0200 [thread overview]
Message-ID: <1306928768-7501-8-git-send-email-rvossen@broadcom.com> (raw)
In-Reply-To: <1306928768-7501-1-git-send-email-rvossen@broadcom.com>
Code cleanup. A read-after-write construct is present in the code to ensure
write order for certain Broadcom chips. Those chips are: bcm4706, bcm4716,
bcm4717, bcm4718. All these chips contain a MIPS processor. This patch gets
rid of several #ifdef __mips__ sections by defining a new macro in a header
file. This patch does not introduce behavioral changes and is purely meant
for code cleanup. The __mips__ define will be made more specific in a future
patch.
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
---
.../staging/brcm80211/brcmsmac/phy/wlc_phy_cmn.c | 63 ++++----------------
drivers/staging/brcm80211/include/bcmutils.h | 11 ++++
2 files changed, 24 insertions(+), 50 deletions(-)
diff --git a/drivers/staging/brcm80211/brcmsmac/phy/wlc_phy_cmn.c b/drivers/staging/brcm80211/brcmsmac/phy/wlc_phy_cmn.c
index f45628a..07a5bcb 100644
--- a/drivers/staging/brcm80211/brcmsmac/phy/wlc_phy_cmn.c
+++ b/drivers/staging/brcm80211/brcmsmac/phy/wlc_phy_cmn.c
@@ -247,16 +247,10 @@ u16 read_radio_reg(phy_info_t *pi, u16 addr)
if ((D11REV_GE(pi->sh->corerev, 24)) ||
(D11REV_IS(pi->sh->corerev, 22)
&& (pi->pubpi.phy_type != PHY_TYPE_SSN))) {
- W_REG(&pi->regs->radioregaddr, addr);
-#ifdef __mips__
- (void)R_REG(&pi->regs->radioregaddr);
-#endif
+ W_REG_FLUSH(&pi->regs->radioregaddr, addr);
data = R_REG(&pi->regs->radioregdata);
} else {
- W_REG(&pi->regs->phy4waddr, addr);
-#ifdef __mips__
- (void)R_REG(&pi->regs->phy4waddr);
-#endif
+ W_REG_FLUSH(&pi->regs->phy4waddr, addr);
#ifdef __ARM_ARCH_4T__
__asm__(" .align 4 ");
@@ -281,16 +275,10 @@ void write_radio_reg(phy_info_t *pi, u16 addr, u16 val)
(D11REV_IS(pi->sh->corerev, 22)
&& (pi->pubpi.phy_type != PHY_TYPE_SSN))) {
- W_REG(&pi->regs->radioregaddr, addr);
-#ifdef __mips__
- (void)R_REG(&pi->regs->radioregaddr);
-#endif
+ W_REG_FLUSH(&pi->regs->radioregaddr, addr);
W_REG(&pi->regs->radioregdata, val);
} else {
- W_REG(&pi->regs->phy4waddr, addr);
-#ifdef __mips__
- (void)R_REG(&pi->regs->phy4waddr);
-#endif
+ W_REG_FLUSH(&pi->regs->phy4waddr, addr);
W_REG(&pi->regs->phy4wdatalo, val);
}
@@ -312,29 +300,17 @@ static u32 read_radio_id(phy_info_t *pi)
if (D11REV_GE(pi->sh->corerev, 24)) {
u32 b0, b1, b2;
- W_REG(&pi->regs->radioregaddr, 0);
-#ifdef __mips__
- (void)R_REG(&pi->regs->radioregaddr);
-#endif
+ W_REG_FLUSH(&pi->regs->radioregaddr, 0);
b0 = (u32) R_REG(&pi->regs->radioregdata);
- W_REG(&pi->regs->radioregaddr, 1);
-#ifdef __mips__
- (void)R_REG(&pi->regs->radioregaddr);
-#endif
+ W_REG_FLUSH(&pi->regs->radioregaddr, 1);
b1 = (u32) R_REG(&pi->regs->radioregdata);
- W_REG(&pi->regs->radioregaddr, 2);
-#ifdef __mips__
- (void)R_REG(&pi->regs->radioregaddr);
-#endif
+ W_REG_FLUSH(&pi->regs->radioregaddr, 2);
b2 = (u32) R_REG(&pi->regs->radioregdata);
id = ((b0 & 0xf) << 28) | (((b2 << 8) | b1) << 12) | ((b0 >> 4)
& 0xf);
} else {
- W_REG(&pi->regs->phy4waddr, RADIO_IDCODE);
-#ifdef __mips__
- (void)R_REG(&pi->regs->phy4waddr);
-#endif
+ W_REG_FLUSH(&pi->regs->phy4waddr, RADIO_IDCODE);
id = (u32) R_REG(&pi->regs->phy4wdatalo);
id |= (u32) R_REG(&pi->regs->phy4wdatahi) << 16;
}
@@ -397,10 +373,7 @@ u16 read_phy_reg(phy_info_t *pi, u16 addr)
regs = pi->regs;
- W_REG(®s->phyregaddr, addr);
-#ifdef __mips__
- (void)R_REG(®s->phyregaddr);
-#endif
+ W_REG_FLUSH(®s->phyregaddr, addr);
pi->phy_wreg = 0;
return R_REG(®s->phyregdata);
@@ -413,8 +386,7 @@ void write_phy_reg(phy_info_t *pi, u16 addr, u16 val)
regs = pi->regs;
#ifdef __mips__
- W_REG(®s->phyregaddr, addr);
- (void)R_REG(®s->phyregaddr);
+ W_REG_FLUSH(®s->phyregaddr, addr);
W_REG(®s->phyregdata, val);
if (addr == 0x72)
(void)R_REG(®s->phyregdata);
@@ -436,10 +408,7 @@ void and_phy_reg(phy_info_t *pi, u16 addr, u16 val)
regs = pi->regs;
- W_REG(®s->phyregaddr, addr);
-#ifdef __mips__
- (void)R_REG(®s->phyregaddr);
-#endif
+ W_REG_FLUSH(®s->phyregaddr, addr);
W_REG(®s->phyregdata, (R_REG(®s->phyregdata) & val));
pi->phy_wreg = 0;
@@ -451,10 +420,7 @@ void or_phy_reg(phy_info_t *pi, u16 addr, u16 val)
regs = pi->regs;
- W_REG(®s->phyregaddr, addr);
-#ifdef __mips__
- (void)R_REG(®s->phyregaddr);
-#endif
+ W_REG_FLUSH(®s->phyregaddr, addr);
W_REG(®s->phyregdata, (R_REG(®s->phyregdata) | val));
pi->phy_wreg = 0;
@@ -466,10 +432,7 @@ void mod_phy_reg(phy_info_t *pi, u16 addr, u16 mask, u16 val)
regs = pi->regs;
- W_REG(®s->phyregaddr, addr);
-#ifdef __mips__
- (void)R_REG(®s->phyregaddr);
-#endif
+ W_REG_FLUSH(®s->phyregaddr, addr);
W_REG(®s->phyregdata,
((R_REG(®s->phyregdata) & ~mask) | (val & mask)));
diff --git a/drivers/staging/brcm80211/include/bcmutils.h b/drivers/staging/brcm80211/include/bcmutils.h
index 17683f2..d7f531e 100644
--- a/drivers/staging/brcm80211/include/bcmutils.h
+++ b/drivers/staging/brcm80211/include/bcmutils.h
@@ -366,6 +366,17 @@ extern void bcm_prpkt(const char *msg, struct sk_buff *p0);
} while (0)
#endif /* __BIG_ENDIAN */
+#ifdef __mips__
+/*
+ * bcm4716 (which includes 4717 & 4718), plus 4706 on PCIe can reorder
+ * transactions. As a fix, a read after write is performed on certain places
+ * in the code. Older chips and the newer 5357 family don't require this fix.
+ */
+#define W_REG_FLUSH(r, v) ({ W_REG((r), (v)); (void)R_REG(r); })
+#else
+#define W_REG_FLUSH(r, v) W_REG((r), (v))
+#endif /* __mips__ */
+
#define AND_REG(r, v) W_REG((r), R_REG(r) & (v))
#define OR_REG(r, v) W_REG((r), R_REG(r) | (v))
--
1.7.4.1
next prev parent reply other threads:[~2011-06-01 11:46 UTC|newest]
Thread overview: 115+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-01 11:44 [PATCH 01/83] staging: brcm80211: removed unused Broadcom specific ioctls codes Roland Vossen
2011-06-01 11:44 ` [PATCH 02/83] staging: brcm80211: removed iovar layer from softmac Roland Vossen
2011-06-01 11:44 ` [PATCH 03/83] staging: brcm80211: cleanup struct wl_info Roland Vossen
2011-06-01 11:44 ` [PATCH 04/83] staging: brcm80211: removed unused timeout fields in wlc_protection Roland Vossen
2011-06-01 11:44 ` [PATCH 05/83] staging: brcm80211: remove WLC_WATCHDOG_TBTT macro Roland Vossen
2011-06-01 11:44 ` [PATCH 06/83] staging: brcm80211: cleanup struct wlc_info definition Roland Vossen
2011-06-01 11:44 ` [PATCH 07/83] staging: brcm80211: fix compiler warning introduced Roland Vossen
2011-06-01 11:44 ` Roland Vossen [this message]
2011-06-01 12:27 ` [PATCH 08/83] staging: brcm80211: replaced #ifdef __mips__ sections by W_REG_FLUSH Jonas Gorski
2011-06-01 17:17 ` Roland Vossen
2011-06-01 11:44 ` [PATCH 09/83] staging: brcm80211: emptied wlioctl.h Roland Vossen
2011-06-01 11:44 ` [PATCH 10/83] staging: brcm80211: removed wlioctl.h and dhdioctl.h Roland Vossen
2011-06-01 11:44 ` [PATCH 11/83] staging: brcm80211: updated MAINTAINERS, README and TODO files Roland Vossen
2011-06-01 11:44 ` [PATCH 12/83] staging: brcm80211: remove iovars IOV_BLOCKMODE Roland Vossen
2011-06-01 11:44 ` [PATCH 13/83] staging: brcm80211: remove iovars IOV_DMA Roland Vossen
2011-06-01 11:44 ` [PATCH 14/83] staging: brcm80211: remove iovars IOV_NUMLOCALINTS Roland Vossen
2011-06-01 11:45 ` [PATCH 15/83] staging: brcm80211: remove iovars IOV_HOSTREG Roland Vossen
2011-06-01 11:45 ` [PATCH 16/83] staging: brcm80211: remove iovars IOV_DIVISOR Roland Vossen
2011-06-01 11:45 ` [PATCH 17/83] staging: brcm80211: remove iovars IOV_POWER Roland Vossen
2011-06-01 11:45 ` [PATCH 18/83] staging: brcm80211: remove iovars IOV_CLOCK Roland Vossen
2011-06-01 11:45 ` [PATCH 19/83] staging: brcm80211: remove iovars IOV_SDMODE Roland Vossen
2011-06-01 11:45 ` [PATCH 20/83] staging: brcm80211: remove iovars IOV_HISPEED Roland Vossen
2011-06-01 11:45 ` [PATCH 21/83] staging: brcm80211: added support for more bcm43224 based boards Roland Vossen
2011-06-01 11:45 ` [PATCH 22/83] staging: brcm80211: removed 'hnd' from filenames Roland Vossen
2011-06-01 11:45 ` [PATCH 23/83] staging: brcm80211: removed 'hnd' from everything but function names Roland Vossen
2011-06-01 11:45 ` [PATCH 24/83] staging: brcm80211: merged two header files into dhd_sdio.c Roland Vossen
2011-06-01 11:45 ` [PATCH 25/83] staging: brcm80211: removed unused stuff from proto/802.11.h Roland Vossen
2011-06-01 11:45 ` [PATCH 26/83] staging: brcm80211: emptied include/802.11.h Roland Vossen
2011-06-01 11:45 ` [PATCH 27/83] staging: brcm80211: removed 802.11.h Roland Vossen
2011-06-01 11:45 ` [PATCH 28/83] staging: brcm80211: cleaned bcmeth.h and bcmevent.h Roland Vossen
2011-06-01 11:45 ` [PATCH 29/83] staging: brcm80211: removed include/proto dir Roland Vossen
2011-06-01 11:45 ` [PATCH 30/83] staging: brcm80211: remove SDIO related definitions from nicpci.h Roland Vossen
2011-06-01 11:45 ` [PATCH 31/83] staging: brcm80211: remove usage of bcmsrom_tbl.h Roland Vossen
2011-06-01 11:45 ` [PATCH 32/83] staging: brcm80211: remove extern variable definitions in bcmsrom.c Roland Vossen
2011-06-01 11:45 ` [PATCH 33/83] staging: brcm80211: remove inclusion of bcmsrom_fmt.h Roland Vossen
2011-06-01 11:45 ` [PATCH 34/83] staging: brcm80211: cleaned sb* header files Roland Vossen
2011-06-01 11:45 ` [PATCH 35/83] staging: brcm80211: moved header files to more specific directory Roland Vossen
2011-06-02 0:08 ` Julian Calaby
2011-06-02 8:32 ` Arend van Spriel
2011-06-02 10:42 ` Julian Calaby
2011-06-01 11:45 ` [PATCH 36/83] staging: brcm80211: cleaned bcmdefs.h Roland Vossen
2011-06-01 11:45 ` [PATCH 37/83] staging: brcm80211: remove usage of pcicfg.h from brcmsmac driver Roland Vossen
2011-06-01 11:45 ` [PATCH 38/83] staging: brcm80211: move PCI related header files to appropriate driver folder Roland Vossen
2011-06-01 23:44 ` Julian Calaby
2011-06-01 11:45 ` [PATCH 39/83] staging: brcm80211: remove functions from nicpci.h Roland Vossen
2011-06-01 11:45 ` [PATCH 40/83] staging: brcm80211: remove unused functions from nicpci.c Roland Vossen
2011-06-01 11:45 ` [PATCH 41/83] staging: brcm80211: add braces to SI_INFO macro definition Roland Vossen
2011-06-01 11:45 ` [PATCH 42/83] staging: brcm80211: remove dependency on pci core difinitions from aiutils.c Roland Vossen
2011-06-01 23:18 ` Julian Calaby
2011-06-02 8:38 ` Arend van Spriel
2011-06-01 11:45 ` [PATCH 43/83] staging: brcm80211: remove pci core defintion files Roland Vossen
2011-06-01 11:45 ` [PATCH 44/83] staging: brcm80211: replaced typedef si_t with struct si_pub Roland Vossen
2011-06-01 23:58 ` Julian Calaby
2011-06-03 16:37 ` Roland Vossen
2011-06-04 0:51 ` Julian Calaby
2011-06-05 8:36 ` Roland Vossen
2011-06-05 9:20 ` Julian Calaby
2011-06-05 19:23 ` julie Sullivan
2011-06-06 1:34 ` Henry Ptasinski
2011-06-06 9:10 ` Roland Vossen
2011-06-06 7:31 ` Roland Vossen
2011-06-06 12:14 ` Julian Calaby
2011-06-08 12:20 ` Roland Vossen
2011-06-01 11:45 ` [PATCH 45/83] staging: brcm80211: deleted sbconfig.h, renamed sbcc.h Roland Vossen
2011-06-01 11:45 ` [PATCH 46/83] staging: brcm80211: moved sbdma.h into brcmsmac/bcmdma.h Roland Vossen
2011-06-01 11:45 ` [PATCH 47/83] staging: brcm80211: macro cleanup Roland Vossen
2011-06-01 11:45 ` [PATCH 48/83] staging: brcm80211: remove phy_version.h Roland Vossen
2011-06-01 11:45 ` [PATCH 49/83] staging: brcm80211: remove BCMEMBEDIMAGE related codes from fullmac Roland Vossen
2011-06-01 11:45 ` [PATCH 50/83] staging: brcm80211: absorb bcmcdc.h into dhd_cdc.c Roland Vossen
2011-06-01 23:37 ` Julian Calaby
2011-06-03 17:50 ` Franky Lin
2011-06-01 11:45 ` [PATCH 51/83] staging: brcm80211: clean up dhd.h in fullmac Roland Vossen
2011-06-01 11:45 ` [PATCH 52/83] staging: brcm80211: absorb bcmsdpcm.h " Roland Vossen
2011-06-01 11:45 ` [PATCH 53/83] staging: brcm80211: absorb msgtrace.h " Roland Vossen
2011-06-01 11:45 ` [PATCH 54/83] staging: brcm80211: combine sbsdpcmdev.h and sbsdio.h Roland Vossen
2011-06-01 23:22 ` Julian Calaby
2011-06-01 11:45 ` [PATCH 55/83] staging: brmc80211: remove sdio.h from fullmac Roland Vossen
2011-06-01 11:45 ` [PATCH 56/83] staging: brcm80211: remove sdioh.h " Roland Vossen
2011-06-01 11:45 ` [PATCH 57/83] staging: brcm80211: clean up wl_cfg80211.h in fullmac Roland Vossen
2011-06-01 11:45 ` [PATCH 58/83] staging: brcm80211: clean up wl_iw.h " Roland Vossen
2011-06-01 11:45 ` [PATCH 59/83] staging: brcm80211: removed wl_ (vendor specific acronym) Roland Vossen
2011-06-01 11:45 ` [PATCH 60/83] staging: brcm80211: renamed files to get rid of wl_ file name prefix Roland Vossen
2011-06-01 11:45 ` [PATCH 61/83] staging: brcm80211: removed wl_dbg.h Roland Vossen
2011-06-01 11:45 ` [PATCH 62/83] staging: brcm80211: removed wl_export.h Roland Vossen
2011-06-01 11:45 ` [PATCH 63/83] staging: brcm80211: removed unused code from bcmotp.c Roland Vossen
2011-06-01 11:45 ` [PATCH 64/83] staging: brcm80211: removed Broadcom specific acronym 'hnd' Roland Vossen
2011-06-01 11:45 ` [PATCH 65/83] staging: brcm80211: removed lmac remnants Roland Vossen
2011-06-01 11:45 ` [PATCH 66/83] staging: brcm80211: cleaned up prefix for utility functions Roland Vossen
2011-06-01 11:45 ` [PATCH 67/83] staging: brcm80211: renamed utility module related files Roland Vossen
2011-06-01 11:45 ` [PATCH 68/83] staging: brcm80211: remove nvram related source files Roland Vossen
2011-06-01 11:45 ` [PATCH 69/83] staging: brcm80211: removed OSL_WRITE_REG and OSL_READ_REG macros Roland Vossen
2011-06-01 11:45 ` [PATCH 70/83] staging: brcm80211: moved register read/write macro's Roland Vossen
2011-06-01 11:45 ` [PATCH 71/83] staging: brcm80211: further simplified register access macro's Roland Vossen
2011-06-02 2:45 ` Julian Calaby
2011-06-03 16:39 ` Roland Vossen
2011-06-01 11:45 ` [PATCH 72/83] staging: brcm80211: cleanup after R_REG/W_REG patches Roland Vossen
2011-06-01 11:45 ` [PATCH 73/83] staging: brcm80211: prepared header files for file rename Roland Vossen
2011-06-01 11:45 ` [PATCH 74/83] staging: brcm80211: renamed files in brcmsmac and include directories Roland Vossen
2011-06-01 11:46 ` [PATCH 75/83] staging: brcm80211: deleted header file include/aidmp.h Roland Vossen
2011-06-01 11:46 ` [PATCH 76/83] staging: brcm80211: cleaned include/brcm_hw_ids.h Roland Vossen
2011-06-01 11:46 ` [PATCH 77/83] staging: brcm80211: moved /include/sdio_host.h to /brcmfmac dir Roland Vossen
2011-06-01 11:46 ` [PATCH 78/83] staging: brcm80211: removed unused definitions from include/soc.h Roland Vossen
2011-06-01 11:46 ` [PATCH 79/83] staging: brcm80211: moved /include/srom.h into /brcmsmac dir Roland Vossen
2011-06-01 11:46 ` [PATCH 80/83] staging: brcm80211: deleted brcmsmac/cfg.h and brcmsmac/bsscfg.h Roland Vossen
2011-06-01 11:46 ` [PATCH 81/83] staging: brcm80211: removed keys.h Roland Vossen
2011-06-01 11:46 ` [PATCH 82/83] staging: brcm80211: renamed file Roland Vossen
2011-06-01 11:46 ` [PATCH 83/83] staging: brcm80211: updated TODO with current state of affairs Roland Vossen
2011-06-01 11:59 ` [PATCH 01/83] staging: brcm80211: removed unused Broadcom specific ioctls codes Rafał Miłecki
2011-06-01 16:23 ` Henry Ptasinski
2011-06-01 16:28 ` Rafał Miłecki
2011-06-02 3:06 ` Julian Calaby
2011-06-03 16:58 ` Roland Vossen
2011-06-04 0:54 ` Julian Calaby
2011-06-03 17:04 ` Henry Ptasinski
2011-06-04 1:00 ` Julian Calaby
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1306928768-7501-8-git-send-email-rvossen@broadcom.com \
--to=rvossen@broadcom.com \
--cc=devel@linuxdriverproject.org \
--cc=gregkh@suse.de \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).