From: Thomas Pedersen <thomas@cozybit.com>
To: linux-wireless@vger.kernel.org
Cc: Javier Cardona <javier@cozybit.com>,
johannes@sipsolutions.net, linville@tuxdriver.com
Subject: [PATCH 7/9] mac80211: Consolidate {mesh,mpp}_path_flush into one function
Date: Wed, 24 Aug 2011 18:40:50 -0700 [thread overview]
Message-ID: <1314236452-7226-8-git-send-email-thomas@cozybit.com> (raw)
In-Reply-To: <1314236452-7226-1-git-send-email-thomas@cozybit.com>
From: Javier Cardona <javier@cozybit.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
---
net/mac80211/mesh_pathtbl.c | 65 +++++++++++++++++-------------------------
1 files changed, 26 insertions(+), 39 deletions(-)
diff --git a/net/mac80211/mesh_pathtbl.c b/net/mac80211/mesh_pathtbl.c
index e941de2..9d9e1ac 100644
--- a/net/mac80211/mesh_pathtbl.c
+++ b/net/mac80211/mesh_pathtbl.c
@@ -790,35 +790,6 @@ void mesh_plink_broken(struct sta_info *sta)
rcu_read_unlock();
}
-/**
- * mesh_path_flush_by_nexthop - Deletes mesh paths if their next hop matches
- *
- * @sta - mesh peer to match
- *
- * RCU notes: this function is called when a mesh plink transitions from
- * PLINK_ESTAB to any other state, since PLINK_ESTAB state is the only one that
- * allows path creation. This will happen before the sta can be freed (because
- * sta_info_destroy() calls this) so any reader in a rcu read block will be
- * protected against the plink disappearing.
- */
-void mesh_path_flush_by_nexthop(struct sta_info *sta)
-{
- struct mesh_table *tbl;
- struct mesh_path *mpath;
- struct mpath_node *node;
- struct hlist_node *p;
- int i;
-
- rcu_read_lock();
- tbl = rcu_dereference(mesh_paths);
- for_each_mesh_entry(tbl, p, node, i) {
- mpath = node->mpath;
- if (rcu_dereference(mpath->next_hop) == sta)
- mesh_path_del(mpath->dst, mpath->sdata);
- }
- rcu_read_unlock();
-}
-
static void mesh_path_node_reclaim(struct rcu_head *rp)
{
struct mpath_node *node = container_of(rp, struct mpath_node, rcu);
@@ -845,7 +816,18 @@ static void __mesh_path_del(struct mesh_table *tbl, struct mpath_node *node)
atomic_dec(&tbl->entries);
}
-static void mesh_path_flush(struct ieee80211_sub_if_data *sdata)
+/**
+ * mesh_path_flush_by_nexthop - Deletes mesh paths if their next hop matches
+ *
+ * @sta - mesh peer to match
+ *
+ * RCU notes: this function is called when a mesh plink transitions from
+ * PLINK_ESTAB to any other state, since PLINK_ESTAB state is the only one that
+ * allows path creation. This will happen before the sta can be freed (because
+ * sta_info_destroy() calls this) so any reader in a rcu read block will be
+ * protected against the plink disappearing.
+ */
+void mesh_path_flush_by_nexthop(struct sta_info *sta)
{
struct mesh_table *tbl;
struct mesh_path *mpath;
@@ -857,7 +839,7 @@ static void mesh_path_flush(struct ieee80211_sub_if_data *sdata)
tbl = rcu_dereference(mesh_paths);
for_each_mesh_entry(tbl, p, node, i) {
mpath = node->mpath;
- if (mpath->sdata == sdata) {
+ if (rcu_dereference(mpath->next_hop) == sta) {
spin_lock_bh(&tbl->hashwlock[i]);
__mesh_path_del(tbl, node);
spin_unlock_bh(&tbl->hashwlock[i]);
@@ -866,24 +848,23 @@ static void mesh_path_flush(struct ieee80211_sub_if_data *sdata)
rcu_read_unlock();
}
-static void mpp_path_flush(struct ieee80211_sub_if_data *sdata)
+/* Needs to be called with the rcu read lock taken */
+static void table_flush_by_iface(struct mesh_table *tbl,
+ struct ieee80211_sub_if_data *sdata)
{
- struct mesh_table *tbl;
struct mesh_path *mpath;
struct mpath_node *node;
struct hlist_node *p;
int i;
- read_lock_bh(&pathtbl_resize_lock);
- tbl = rcu_dereference_protected(mpp_paths,
- lockdep_is_held(pathtbl_resize_lock));
for_each_mesh_entry(tbl, p, node, i) {
mpath = node->mpath;
+ if (mpath->sdata != sdata)
+ continue;
spin_lock_bh(&tbl->hashwlock[i]);
__mesh_path_del(tbl, node);
spin_unlock_bh(&tbl->hashwlock[i]);
}
- read_unlock_bh(&pathtbl_resize_lock);
}
/**
@@ -896,8 +877,14 @@ static void mpp_path_flush(struct ieee80211_sub_if_data *sdata)
*/
void mesh_path_flush_by_iface(struct ieee80211_sub_if_data *sdata)
{
- mesh_path_flush(sdata);
- mpp_path_flush(sdata);
+ struct mesh_table *tbl;
+
+ rcu_read_lock();
+ tbl = rcu_dereference(mesh_paths);
+ table_flush_by_iface(tbl, sdata);
+ tbl = rcu_dereference(mpp_paths);
+ table_flush_by_iface(tbl, sdata);
+ rcu_read_unlock();
}
/**
--
1.7.4.1
next prev parent reply other threads:[~2011-08-25 1:41 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-25 1:40 [PATCH 0/9] mesh fixes Thomas Pedersen
2011-08-25 1:40 ` [PATCH 1/9] mac80211: Fix RCU pointer dereference in mesh_path_discard_frame() Thomas Pedersen
2011-08-25 2:08 ` Johannes Berg
2011-08-25 18:16 ` Javier Cardona
2011-08-25 18:21 ` Johannes Berg
2011-08-25 18:45 ` Javier Cardona
2011-08-25 18:48 ` Johannes Berg
2011-08-25 19:04 ` Javier Cardona
2011-08-25 1:40 ` [PATCH 2/9] mac80211: Limit amount of HWMP frames and forwarded data packets in queues on mesh interfaces Thomas Pedersen
2011-08-25 5:08 ` Johannes Berg
2011-08-25 17:46 ` Javier Cardona
2011-08-25 1:40 ` [PATCH 3/9] mac80211: Remove mesh paths when an interface is removed Thomas Pedersen
2011-08-25 1:40 ` [PATCH 4/9] mac80211: Improve mpath state locking Thomas Pedersen
2011-08-25 1:40 ` [PATCH 5/9] mac80211: Remove redundant mesh path expiration checks Thomas Pedersen
2011-08-25 1:40 ` [PATCH 6/9] mac80211: Don't iterate twice over all mpaths when once in sufficient Thomas Pedersen
2011-08-25 1:40 ` Thomas Pedersen [this message]
2011-08-25 1:40 ` [PATCH 8/9] mac80211: Don't take the mesh path resize lock when deleting an mpath Thomas Pedersen
2011-08-25 1:40 ` [PATCH 9/9] mac80211: Consolidate mesh path duplicated functions Thomas Pedersen
2011-08-27 0:18 ` [PATCH v2 0/8] mesh fixes Javier Cardona
2011-08-27 0:18 ` [PATCH v2 1/8] mac80211: Fix RCU pointer dereference in mesh_path_discard_frame() Javier Cardona
2011-08-27 0:18 ` [PATCH v2 2/8] mac80211: Remove mesh paths when an interface is removed Javier Cardona
2011-08-27 0:18 ` [PATCH v2 3/8] mac80211: Improve mpath state locking Javier Cardona
2011-08-27 0:18 ` [PATCH v2 4/8] mac80211: Remove redundant mesh path expiration checks Javier Cardona
2011-08-27 0:18 ` [PATCH v2 5/8] mac80211: Don't iterate twice over all mpaths when once in sufficient Javier Cardona
2011-08-27 0:18 ` [PATCH v2 6/8] mac80211: Consolidate {mesh,mpp}_path_flush into one function Javier Cardona
2011-08-29 13:49 ` Johannes Berg
2011-08-29 18:36 ` Javier Cardona
2011-08-29 18:38 ` Johannes Berg
2011-08-27 0:18 ` [PATCH v2 7/8] mac80211: Don't take the mesh path resize lock when deleting an mpath Javier Cardona
2011-08-29 13:49 ` Johannes Berg
2011-08-27 0:18 ` [PATCH v2 8/8] mac80211: Consolidate mesh path duplicated functions Javier Cardona
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1314236452-7226-8-git-send-email-thomas@cozybit.com \
--to=thomas@cozybit.com \
--cc=javier@cozybit.com \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).