From: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
To: <johannes@sipsolutions.net>
Cc: <linville@tuxdriver.com>, <linux-wireless@vger.kernel.org>,
Rajkumar Manoharan <rmanohar@qca.qualcomm.com>,
Jouni Malinen <jouni@qca.qualcomm.com>
Subject: [PATCH 1/2] nl80211/cfg80211: Add support to disable CCK rate for management frame
Date: Fri, 23 Sep 2011 20:42:58 +0530 [thread overview]
Message-ID: <1316790779-8955-1-git-send-email-rmanohar@qca.qualcomm.com> (raw)
Add a new nl80211 attribute to specify whether to send the management
frames in CCK rate or not. As of now the wpa_supplicant is disabling
CCK rate at P2P init itself. So this patch helps to send P2P probe
request/probe response/action frames being sent at non CCK rate in 2GHz
without disabling 11b rates.
This attribute is used with NL80211_CMD_TRIGGER_SCAN and
NL80211_CMD_FRAME commands to disable CCK rate for management frame
transmission.
Cc: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
---
include/linux/nl80211.h | 13 +++++++++++++
include/net/cfg80211.h | 5 ++++-
net/mac80211/cfg.c | 3 ++-
net/wireless/core.h | 3 ++-
net/wireless/mlme.c | 5 +++--
net/wireless/nl80211.c | 9 ++++++++-
6 files changed, 32 insertions(+), 6 deletions(-)
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 460b12a..c73582f 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -238,6 +238,8 @@
*
* @NL80211_CMD_GET_SCAN: get scan results
* @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters
+ * %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the
+ * probe requests at CCK rate or not.
* @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to
* NL80211_CMD_GET_SCAN and on the "scan" multicast group)
* @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons,
@@ -432,6 +434,8 @@
* specified using %NL80211_ATTR_DURATION. When called, this operation
* returns a cookie (%NL80211_ATTR_COOKIE) that will be included with the
* TX status event pertaining to the TX request.
+ * %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the
+ * management frames at CCK rate or not in 2GHz band.
* @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this
* command may be used with the corresponding cookie to cancel the wait
* time if it is known that it is no longer necessary.
@@ -1078,6 +1082,13 @@ enum nl80211_commands {
* @NL80211_ATTR_PMKSA_CANDIDATE: Nested attribute containing the PMKSA caching
* candidate information, see &enum nl80211_pmksa_candidate_attr.
*
+ * @NL80211_ATTR_TX_NO_CCK_RATE: Indicates whether to use CCK rate or not
+ * for management frames transmission. In order to avoid p2p probe/action
+ * frames are being transmitted at CCK rate in 2GHz band, the user space
+ * applications use this attribute.
+ * This attribute is used with %NL80211_CMD_TRIGGER_SCAN and
+ * %NL80211_CMD_FRAME commands.
+ *
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
@@ -1298,6 +1309,8 @@ enum nl80211_attrs {
NL80211_ATTR_PMKSA_CANDIDATE,
+ NL80211_ATTR_TX_NO_CCK_RATE,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index ccfdf3f..c1dd56b 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -860,6 +860,7 @@ struct cfg80211_ssid {
* @wiphy: the wiphy this was for
* @dev: the interface
* @aborted: (internal) scan request was notified as aborted
+ * @no_cck: used to send probe requests at non CCK rate in 2GHz band
*/
struct cfg80211_scan_request {
struct cfg80211_ssid *ssids;
@@ -874,6 +875,7 @@ struct cfg80211_scan_request {
struct wiphy *wiphy;
struct net_device *dev;
bool aborted;
+ bool no_cck;
/* keep last */
struct ieee80211_channel *channels[0];
@@ -1560,7 +1562,8 @@ struct cfg80211_ops {
struct ieee80211_channel *chan, bool offchan,
enum nl80211_channel_type channel_type,
bool channel_type_valid, unsigned int wait,
- const u8 *buf, size_t len, u64 *cookie);
+ const u8 *buf, size_t len, bool no_cck,
+ u64 *cookie);
int (*mgmt_tx_cancel_wait)(struct wiphy *wiphy,
struct net_device *dev,
u64 cookie);
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index b57ddf9..9cba010 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -1869,7 +1869,8 @@ static int ieee80211_mgmt_tx(struct wiphy *wiphy, struct net_device *dev,
struct ieee80211_channel *chan, bool offchan,
enum nl80211_channel_type channel_type,
bool channel_type_valid, unsigned int wait,
- const u8 *buf, size_t len, u64 *cookie)
+ const u8 *buf, size_t len, bool no_cck,
+ u64 *cookie)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = sdata->local;
diff --git a/net/wireless/core.h b/net/wireless/core.h
index 796a4bd..a472d60 100644
--- a/net/wireless/core.h
+++ b/net/wireless/core.h
@@ -375,7 +375,8 @@ int cfg80211_mlme_mgmt_tx(struct cfg80211_registered_device *rdev,
struct ieee80211_channel *chan, bool offchan,
enum nl80211_channel_type channel_type,
bool channel_type_valid, unsigned int wait,
- const u8 *buf, size_t len, u64 *cookie);
+ const u8 *buf, size_t len, bool no_cck,
+ u64 *cookie);
/* SME */
int __cfg80211_connect(struct cfg80211_registered_device *rdev,
diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c
index 61adea5..21fc970 100644
--- a/net/wireless/mlme.c
+++ b/net/wireless/mlme.c
@@ -900,7 +900,8 @@ int cfg80211_mlme_mgmt_tx(struct cfg80211_registered_device *rdev,
struct ieee80211_channel *chan, bool offchan,
enum nl80211_channel_type channel_type,
bool channel_type_valid, unsigned int wait,
- const u8 *buf, size_t len, u64 *cookie)
+ const u8 *buf, size_t len, bool no_cck,
+ u64 *cookie)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
const struct ieee80211_mgmt *mgmt;
@@ -991,7 +992,7 @@ int cfg80211_mlme_mgmt_tx(struct cfg80211_registered_device *rdev,
/* Transmit the Action frame as requested by user space */
return rdev->ops->mgmt_tx(&rdev->wiphy, dev, chan, offchan,
channel_type, channel_type_valid,
- wait, buf, len, cookie);
+ wait, buf, len, no_cck, cookie);
}
bool cfg80211_rx_mgmt(struct net_device *dev, int freq, const u8 *buf,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index c26a1da..eba88c7e 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -191,6 +191,7 @@ static const struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] = {
.len = IEEE80211_MAX_DATA_LEN },
[NL80211_ATTR_ROAM_SUPPORT] = { .type = NLA_FLAG },
[NL80211_ATTR_SCHED_SCAN_MATCH] = { .type = NLA_NESTED },
+ [NL80211_ATTR_TX_NO_CCK_RATE] = { .type = NLA_FLAG },
};
/* policy for the key attributes */
@@ -3620,6 +3621,9 @@ static int nl80211_trigger_scan(struct sk_buff *skb, struct genl_info *info)
}
}
+ request->no_cck =
+ nla_get_flag(info->attrs[NL80211_ATTR_TX_NO_CCK_RATE]);
+
request->dev = dev;
request->wiphy = &rdev->wiphy;
@@ -5192,6 +5196,7 @@ static int nl80211_tx_mgmt(struct sk_buff *skb, struct genl_info *info)
struct sk_buff *msg;
unsigned int wait = 0;
bool offchan;
+ bool no_cck;
if (!info->attrs[NL80211_ATTR_FRAME] ||
!info->attrs[NL80211_ATTR_WIPHY_FREQ])
@@ -5228,6 +5233,8 @@ static int nl80211_tx_mgmt(struct sk_buff *skb, struct genl_info *info)
offchan = info->attrs[NL80211_ATTR_OFFCHANNEL_TX_OK];
+ no_cck = nla_get_flag(info->attrs[NL80211_ATTR_TX_NO_CCK_RATE]);
+
freq = nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_FREQ]);
chan = rdev_freq_to_chan(rdev, freq, channel_type);
if (chan == NULL)
@@ -5248,7 +5255,7 @@ static int nl80211_tx_mgmt(struct sk_buff *skb, struct genl_info *info)
channel_type_valid, wait,
nla_data(info->attrs[NL80211_ATTR_FRAME]),
nla_len(info->attrs[NL80211_ATTR_FRAME]),
- &cookie);
+ no_cck, &cookie);
if (err)
goto free_msg;
--
1.7.6.3
next reply other threads:[~2011-09-23 15:12 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-23 15:12 Rajkumar Manoharan [this message]
2011-09-23 15:12 ` [PATCH 2/2] mac80211: Send the management frame at requested rate Rajkumar Manoharan
2011-09-25 8:58 ` Eliad Peller
2011-09-25 9:21 ` Rajkumar Manoharan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1316790779-8955-1-git-send-email-rmanohar@qca.qualcomm.com \
--to=rmanohar@qca.qualcomm.com \
--cc=johannes@sipsolutions.net \
--cc=jouni@qca.qualcomm.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox