From: "Franky Lin" <frankyl@broadcom.com>
To: gregkh@suse.de
Cc: devel@linuxdriverproject.org, linux-wireless@vger.kernel.org
Subject: [PATCH v3 02/25] staging: brcm80211: removed unused argument from softmac functions
Date: Thu, 29 Sep 2011 15:34:13 -0700 [thread overview]
Message-ID: <1317335676-3424-3-git-send-email-frankyl@broadcom.com> (raw)
In-Reply-To: <1317335676-3424-1-git-send-email-frankyl@broadcom.com>
From: Roland Vossen <rvossen@broadcom.com>
Parameter 's2' was unused. Affected function was only used internally
to main.c and has been made static and moved above its callers.
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
---
drivers/staging/brcm80211/brcmsmac/main.c | 380 ++++++++++++++---------------
drivers/staging/brcm80211/brcmsmac/main.h | 2 -
2 files changed, 188 insertions(+), 194 deletions(-)
diff --git a/drivers/staging/brcm80211/brcmsmac/main.c b/drivers/staging/brcm80211/brcmsmac/main.c
index d6b43ff..d160212 100644
--- a/drivers/staging/brcm80211/brcmsmac/main.c
+++ b/drivers/staging/brcm80211/brcmsmac/main.c
@@ -830,9 +830,193 @@ brcms_b_recv(struct brcms_hardware *wlc_hw, uint fifo, bool bound)
return n >= bound_limit;
}
+static void brcms_c_war16165(struct brcms_c_info *wlc, bool tx)
+{
+ if (tx) {
+ /* the post-increment is used in STAY_AWAKE macro */
+ if (wlc->txpend16165war++ == 0)
+ brcms_c_set_ps_ctrl(wlc);
+ } else {
+ wlc->txpend16165war--;
+ if (wlc->txpend16165war == 0)
+ brcms_c_set_ps_ctrl(wlc);
+ }
+}
+
+/* process an individual struct tx_status */
static bool
-brcms_b_dotxstatus(struct brcms_hardware *wlc_hw, struct tx_status *txs,
- u32 s2)
+brcms_c_dotxstatus(struct brcms_c_info *wlc, struct tx_status *txs)
+{
+ struct sk_buff *p;
+ uint queue;
+ struct d11txh *txh;
+ struct scb *scb = NULL;
+ bool free_pdu;
+ int tx_rts, tx_frame_count, tx_rts_count;
+ uint totlen, supr_status;
+ bool lastframe;
+ struct ieee80211_hdr *h;
+ u16 mcl;
+ struct ieee80211_tx_info *tx_info;
+ struct ieee80211_tx_rate *txrate;
+ int i;
+
+ /* discard intermediate indications for ucode with one legitimate case:
+ * e.g. if "useRTS" is set. ucode did a successful rts/cts exchange,
+ * but the subsequent tx of DATA failed. so it will start rts/cts
+ * from the beginning (resetting the rts transmission count)
+ */
+ if (!(txs->status & TX_STATUS_AMPDU)
+ && (txs->status & TX_STATUS_INTERMEDIATE)) {
+ wiphy_err(wlc->wiphy, "%s: INTERMEDIATE but not AMPDU\n",
+ __func__);
+ return false;
+ }
+
+ queue = txs->frameid & TXFID_QUEUE_MASK;
+ if (queue >= NFIFO) {
+ p = NULL;
+ goto fatal;
+ }
+
+ p = dma_getnexttxp(wlc->hw->di[queue], DMA_RANGE_TRANSMITTED);
+ if (wlc->war16165)
+ brcms_c_war16165(wlc, false);
+ if (p == NULL)
+ goto fatal;
+
+ txh = (struct d11txh *) (p->data);
+ mcl = le16_to_cpu(txh->MacTxControlLow);
+
+ if (txs->phyerr) {
+ if (brcm_msg_level & LOG_ERROR_VAL) {
+ wiphy_err(wlc->wiphy, "phyerr 0x%x, rate 0x%x\n",
+ txs->phyerr, txh->MainRates);
+ brcms_c_print_txdesc(txh);
+ }
+ brcms_c_print_txstatus(txs);
+ }
+
+ if (txs->frameid != cpu_to_le16(txh->TxFrameID))
+ goto fatal;
+ tx_info = IEEE80211_SKB_CB(p);
+ h = (struct ieee80211_hdr *)((u8 *) (txh + 1) + D11_PHY_HDR_LEN);
+
+ if (tx_info->control.sta)
+ scb = (struct scb *)tx_info->control.sta->drv_priv;
+
+ if (tx_info->flags & IEEE80211_TX_CTL_AMPDU) {
+ brcms_c_ampdu_dotxstatus(wlc->ampdu, scb, p, txs);
+ return false;
+ }
+
+ supr_status = txs->status & TX_STATUS_SUPR_MASK;
+ if (supr_status == TX_STATUS_SUPR_BADCH)
+ BCMMSG(wlc->wiphy,
+ "%s: Pkt tx suppressed, possibly channel %d\n",
+ __func__, CHSPEC_CHANNEL(wlc->default_bss->chanspec));
+
+ tx_rts = cpu_to_le16(txh->MacTxControlLow) & TXC_SENDRTS;
+ tx_frame_count =
+ (txs->status & TX_STATUS_FRM_RTX_MASK) >> TX_STATUS_FRM_RTX_SHIFT;
+ tx_rts_count =
+ (txs->status & TX_STATUS_RTS_RTX_MASK) >> TX_STATUS_RTS_RTX_SHIFT;
+
+ lastframe = !ieee80211_has_morefrags(h->frame_control);
+
+ if (!lastframe) {
+ wiphy_err(wlc->wiphy, "Not last frame!\n");
+ } else {
+ /*
+ * Set information to be consumed by Minstrel ht.
+ *
+ * The "fallback limit" is the number of tx attempts a given
+ * MPDU is sent at the "primary" rate. Tx attempts beyond that
+ * limit are sent at the "secondary" rate.
+ * A 'short frame' does not exceed RTS treshold.
+ */
+ u16 sfbl, /* Short Frame Rate Fallback Limit */
+ lfbl, /* Long Frame Rate Fallback Limit */
+ fbl;
+
+ if (queue < AC_COUNT) {
+ sfbl = GFIELD(wlc->wme_retries[wme_fifo2ac[queue]],
+ EDCF_SFB);
+ lfbl = GFIELD(wlc->wme_retries[wme_fifo2ac[queue]],
+ EDCF_LFB);
+ } else {
+ sfbl = wlc->SFBL;
+ lfbl = wlc->LFBL;
+ }
+
+ txrate = tx_info->status.rates;
+ if (txrate[0].flags & IEEE80211_TX_RC_USE_RTS_CTS)
+ fbl = lfbl;
+ else
+ fbl = sfbl;
+
+ ieee80211_tx_info_clear_status(tx_info);
+
+ if ((tx_frame_count > fbl) && (txrate[1].idx >= 0)) {
+ /*
+ * rate selection requested a fallback rate
+ * and we used it
+ */
+ txrate[0].count = fbl;
+ txrate[1].count = tx_frame_count - fbl;
+ } else {
+ /*
+ * rate selection did not request fallback rate, or
+ * we didn't need it
+ */
+ txrate[0].count = tx_frame_count;
+ /*
+ * rc80211_minstrel.c:minstrel_tx_status() expects
+ * unused rates to be marked with idx = -1
+ */
+ txrate[1].idx = -1;
+ txrate[1].count = 0;
+ }
+
+ /* clear the rest of the rates */
+ for (i = 2; i < IEEE80211_TX_MAX_RATES; i++) {
+ txrate[i].idx = -1;
+ txrate[i].count = 0;
+ }
+
+ if (txs->status & TX_STATUS_ACK_RCV)
+ tx_info->flags |= IEEE80211_TX_STAT_ACK;
+ }
+
+ totlen = brcmu_pkttotlen(p);
+ free_pdu = true;
+
+ brcms_c_txfifo_complete(wlc, queue, 1);
+
+ if (lastframe) {
+ p->next = NULL;
+ p->prev = NULL;
+ /* remove PLCP & Broadcom tx descriptor header */
+ skb_pull(p, D11_PHY_HDR_LEN);
+ skb_pull(p, D11_TXH_LEN);
+ ieee80211_tx_status_irqsafe(wlc->pub->ieee_hw, p);
+ } else {
+ wiphy_err(wlc->wiphy, "%s: Not last frame => not calling "
+ "tx_status\n", __func__);
+ }
+
+ return false;
+
+ fatal:
+ if (p)
+ brcmu_pkt_buf_free_skb(p);
+
+ return true;
+
+}
+
+static bool
+brcms_b_dotxstatus(struct brcms_hardware *wlc_hw, struct tx_status *txs)
{
/* discard intermediate indications for ucode with one legitimate case:
* e.g. if "useRTS" is set. ucode did a successful rts/cts exchange,
@@ -843,7 +1027,7 @@ brcms_b_dotxstatus(struct brcms_hardware *wlc_hw, struct tx_status *txs,
&& (txs->status & TX_STATUS_INTERMEDIATE))
return false;
- return brcms_c_dotxstatus(wlc_hw->wlc, txs, s2);
+ return brcms_c_dotxstatus(wlc_hw->wlc, txs);
}
/* process tx completion events in BMAC
@@ -885,7 +1069,7 @@ brcms_b_txstatus(struct brcms_hardware *wlc_hw, bool bound, bool *fatal)
txs->phyerr = (s2 & TXS_PTX_MASK) >> TXS_PTX_SHIFT;
txs->lasttxtime = 0;
- *fatal = brcms_b_dotxstatus(wlc_hw, txs, s2);
+ *fatal = brcms_b_dotxstatus(wlc_hw, txs);
/* !give others some time to run! */
if (++n >= max_tx_num)
@@ -7654,19 +7838,6 @@ void brcms_c_send_q(struct brcms_c_info *wlc)
in_send_q = false;
}
-static void brcms_c_war16165(struct brcms_c_info *wlc, bool tx)
-{
- if (tx) {
- /* the post-increment is used in STAY_AWAKE macro */
- if (wlc->txpend16165war++ == 0)
- brcms_c_set_ps_ctrl(wlc);
- } else {
- wlc->txpend16165war--;
- if (wlc->txpend16165war == 0)
- brcms_c_set_ps_ctrl(wlc);
- }
-}
-
void
brcms_c_txfifo(struct brcms_c_info *wlc, uint fifo, struct sk_buff *p,
bool commit, s8 txpktpend)
@@ -7978,181 +8149,6 @@ void brcms_c_tbtt(struct brcms_c_info *wlc)
wlc->qvalid |= MCMD_DIRFRMQVAL;
}
-/* process an individual struct tx_status */
-bool
-brcms_c_dotxstatus(struct brcms_c_info *wlc, struct tx_status *txs, u32 frm_tx2)
-{
- struct sk_buff *p;
- uint queue;
- struct d11txh *txh;
- struct scb *scb = NULL;
- bool free_pdu;
- int tx_rts, tx_frame_count, tx_rts_count;
- uint totlen, supr_status;
- bool lastframe;
- struct ieee80211_hdr *h;
- u16 mcl;
- struct ieee80211_tx_info *tx_info;
- struct ieee80211_tx_rate *txrate;
- int i;
-
- /* Compiler reference to avoid unused variable warning */
- (void)(frm_tx2);
-
- /* discard intermediate indications for ucode with one legitimate case:
- * e.g. if "useRTS" is set. ucode did a successful rts/cts exchange,
- * but the subsequent tx of DATA failed. so it will start rts/cts
- * from the beginning (resetting the rts transmission count)
- */
- if (!(txs->status & TX_STATUS_AMPDU)
- && (txs->status & TX_STATUS_INTERMEDIATE)) {
- wiphy_err(wlc->wiphy, "%s: INTERMEDIATE but not AMPDU\n",
- __func__);
- return false;
- }
-
- queue = txs->frameid & TXFID_QUEUE_MASK;
- if (queue >= NFIFO) {
- p = NULL;
- goto fatal;
- }
-
- p = dma_getnexttxp(wlc->hw->di[queue], DMA_RANGE_TRANSMITTED);
- if (wlc->war16165)
- brcms_c_war16165(wlc, false);
- if (p == NULL)
- goto fatal;
-
- txh = (struct d11txh *) (p->data);
- mcl = le16_to_cpu(txh->MacTxControlLow);
-
- if (txs->phyerr) {
- if (brcm_msg_level & LOG_ERROR_VAL) {
- wiphy_err(wlc->wiphy, "phyerr 0x%x, rate 0x%x\n",
- txs->phyerr, txh->MainRates);
- brcms_c_print_txdesc(txh);
- }
- brcms_c_print_txstatus(txs);
- }
-
- if (txs->frameid != cpu_to_le16(txh->TxFrameID))
- goto fatal;
- tx_info = IEEE80211_SKB_CB(p);
- h = (struct ieee80211_hdr *)((u8 *) (txh + 1) + D11_PHY_HDR_LEN);
-
- if (tx_info->control.sta)
- scb = (struct scb *)tx_info->control.sta->drv_priv;
-
- if (tx_info->flags & IEEE80211_TX_CTL_AMPDU) {
- brcms_c_ampdu_dotxstatus(wlc->ampdu, scb, p, txs);
- return false;
- }
-
- supr_status = txs->status & TX_STATUS_SUPR_MASK;
- if (supr_status == TX_STATUS_SUPR_BADCH)
- BCMMSG(wlc->wiphy,
- "%s: Pkt tx suppressed, possibly channel %d\n",
- __func__, CHSPEC_CHANNEL(wlc->default_bss->chanspec));
-
- tx_rts = cpu_to_le16(txh->MacTxControlLow) & TXC_SENDRTS;
- tx_frame_count =
- (txs->status & TX_STATUS_FRM_RTX_MASK) >> TX_STATUS_FRM_RTX_SHIFT;
- tx_rts_count =
- (txs->status & TX_STATUS_RTS_RTX_MASK) >> TX_STATUS_RTS_RTX_SHIFT;
-
- lastframe = !ieee80211_has_morefrags(h->frame_control);
-
- if (!lastframe) {
- wiphy_err(wlc->wiphy, "Not last frame!\n");
- } else {
- /*
- * Set information to be consumed by Minstrel ht.
- *
- * The "fallback limit" is the number of tx attempts a given
- * MPDU is sent at the "primary" rate. Tx attempts beyond that
- * limit are sent at the "secondary" rate.
- * A 'short frame' does not exceed RTS treshold.
- */
- u16 sfbl, /* Short Frame Rate Fallback Limit */
- lfbl, /* Long Frame Rate Fallback Limit */
- fbl;
-
- if (queue < AC_COUNT) {
- sfbl = GFIELD(wlc->wme_retries[wme_fifo2ac[queue]],
- EDCF_SFB);
- lfbl = GFIELD(wlc->wme_retries[wme_fifo2ac[queue]],
- EDCF_LFB);
- } else {
- sfbl = wlc->SFBL;
- lfbl = wlc->LFBL;
- }
-
- txrate = tx_info->status.rates;
- if (txrate[0].flags & IEEE80211_TX_RC_USE_RTS_CTS)
- fbl = lfbl;
- else
- fbl = sfbl;
-
- ieee80211_tx_info_clear_status(tx_info);
-
- if ((tx_frame_count > fbl) && (txrate[1].idx >= 0)) {
- /*
- * rate selection requested a fallback rate
- * and we used it
- */
- txrate[0].count = fbl;
- txrate[1].count = tx_frame_count - fbl;
- } else {
- /*
- * rate selection did not request fallback rate, or
- * we didn't need it
- */
- txrate[0].count = tx_frame_count;
- /*
- * rc80211_minstrel.c:minstrel_tx_status() expects
- * unused rates to be marked with idx = -1
- */
- txrate[1].idx = -1;
- txrate[1].count = 0;
- }
-
- /* clear the rest of the rates */
- for (i = 2; i < IEEE80211_TX_MAX_RATES; i++) {
- txrate[i].idx = -1;
- txrate[i].count = 0;
- }
-
- if (txs->status & TX_STATUS_ACK_RCV)
- tx_info->flags |= IEEE80211_TX_STAT_ACK;
- }
-
- totlen = brcmu_pkttotlen(p);
- free_pdu = true;
-
- brcms_c_txfifo_complete(wlc, queue, 1);
-
- if (lastframe) {
- p->next = NULL;
- p->prev = NULL;
- /* remove PLCP & Broadcom tx descriptor header */
- skb_pull(p, D11_PHY_HDR_LEN);
- skb_pull(p, D11_TXH_LEN);
- ieee80211_tx_status_irqsafe(wlc->pub->ieee_hw, p);
- } else {
- wiphy_err(wlc->wiphy, "%s: Not last frame => not calling "
- "tx_status\n", __func__);
- }
-
- return false;
-
- fatal:
- if (p)
- brcmu_pkt_buf_free_skb(p);
-
- return true;
-
-}
-
void
brcms_c_txfifo_complete(struct brcms_c_info *wlc, uint fifo, s8 txpktpend)
{
diff --git a/drivers/staging/brcm80211/brcmsmac/main.h b/drivers/staging/brcm80211/brcmsmac/main.h
index aa0bf03..1572e46 100644
--- a/drivers/staging/brcm80211/brcmsmac/main.h
+++ b/drivers/staging/brcm80211/brcmsmac/main.h
@@ -702,8 +702,6 @@ struct brcms_bss_cfg {
extern void brcms_c_fatal_error(struct brcms_c_info *wlc);
extern void brcms_b_rpc_watchdog(struct brcms_c_info *wlc);
extern void brcms_c_recv(struct brcms_c_info *wlc, struct sk_buff *p);
-extern bool brcms_c_dotxstatus(struct brcms_c_info *wlc, struct tx_status *txs,
- u32 frm_tx2);
extern void brcms_c_txfifo(struct brcms_c_info *wlc, uint fifo,
struct sk_buff *p,
bool commit, s8 txpktpend);
--
1.7.1
next prev parent reply other threads:[~2011-09-29 22:34 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-27 17:45 [PATCH v2 00/26] staging: brcm80211: 8th reaction for mainline patch #2 Franky Lin
2011-09-27 17:45 ` [PATCH v2 01/26] staging: brcm80211: remove uncoditional code blocks from brcmsmac Franky Lin
2011-09-27 17:45 ` [PATCH v2 02/26] staging: brcm80211: removed unused argument from softmac functions Franky Lin
2011-09-27 17:45 ` [PATCH v2 03/26] staging: brcm80211: deleted unused array of bss configurations in softmac Franky Lin
2011-09-27 17:45 ` [PATCH v2 04/26] staging: brcm80211: removed redundant wlc->cfg struct member Franky Lin
2011-09-27 17:45 ` [PATCH v2 05/26] staging: brcm80211: removed global var from aiutils.c Franky Lin
2011-09-27 17:45 ` [PATCH v2 06/26] staging: brcm80211: removed global vars in softmac ucode handling Franky Lin
2011-09-27 17:45 ` [PATCH v2 07/26] staging: brcm80211: removed unused softmac workaround Franky Lin
2011-09-27 17:45 ` [PATCH v2 08/26] staging: brcm80211: remove ht_cap field from brcms_c_info structure Franky Lin
2011-09-27 17:45 ` [PATCH v2 09/26] staging: brcm80211: use fragment number provided in transmit frame Franky Lin
2011-09-27 17:45 ` [PATCH v2 10/26] staging: brcm80211: remove unused function si_pmu_ilp_clock() Franky Lin
2011-09-27 17:45 ` [PATCH v2 11/26] staging: brcm80211: make device initializer table for wme constant Franky Lin
2011-09-27 17:45 ` [PATCH v2 12/26] staging: brcm80211: remove dongle firmware related debug code Franky Lin
2011-09-27 17:45 ` [PATCH v2 13/26] staging: brcm80211: remove unnecessary mac80211 callbacks Franky Lin
2011-09-27 17:45 ` [PATCH v2 14/26] staging: brcm80211: removed band related global vars from softmac Franky Lin
2011-09-27 17:45 ` [PATCH v2 15/26] staging: brcm80211: removed global var global_scb " Franky Lin
2011-09-27 17:45 ` [PATCH v2 16/26] staging: brcm80211: various global var related changes in softmac Franky Lin
2011-09-27 17:45 ` [PATCH v2 17/26] staging: brcm80211: removed global variable in softmac otp Franky Lin
2011-09-27 17:45 ` [PATCH v2 18/26] staging: brcm80211: changing interface to n-phy rssi compute function Franky Lin
2011-09-27 17:45 ` [PATCH v2 19/26] staging: brcm80211: change interface for common " Franky Lin
2011-09-27 17:45 ` [PATCH v2 20/26] staging: brcm80211: convert endianess before handling the frame Franky Lin
2011-09-27 17:45 ` [PATCH v2 21/26] staging: brcm80211: use endian annotated structures in brcmsmac Franky Lin
2011-09-27 17:45 ` [PATCH v2 22/26] staging: brcm80211: move rssi computation to place we need it Franky Lin
2011-09-27 17:45 ` [PATCH v2 23/26] staging: brcm80211: use d11rxhdr structure in brcms_c_recover_tsf64() Franky Lin
2011-09-27 17:45 ` [PATCH v2 24/26] staging: brcm80211: declared global vars in softmac phy as const Franky Lin
2011-09-27 18:35 ` Larry Finger
2011-09-27 21:10 ` Arend van Spriel
2011-09-28 5:12 ` Larry Finger
2011-09-27 17:45 ` [PATCH v2 25/26] staging: brcm80211: simple changes to softmac phy variables Franky Lin
2011-09-27 17:45 ` [PATCH v2 26/26] staging: brcm80211: declared global vars in softmac phy as const Franky Lin
2011-09-29 22:34 ` [PATCH v3 00/25] staging: brcm80211: 8th reaction for mainline patch #2 Franky Lin
2011-09-29 22:34 ` [PATCH v3 01/25] staging: brcm80211: remove uncoditional code blocks from brcmsmac Franky Lin
2011-09-29 22:34 ` Franky Lin [this message]
2011-09-29 22:34 ` [PATCH v3 03/25] staging: brcm80211: deleted unused array of bss configurations in softmac Franky Lin
2011-09-29 22:34 ` [PATCH v3 04/25] staging: brcm80211: removed redundant wlc->cfg struct member Franky Lin
2011-09-29 22:34 ` [PATCH v3 05/25] staging: brcm80211: removed global var from aiutils.c Franky Lin
2011-09-29 22:34 ` [PATCH v3 06/25] staging: brcm80211: removed global vars in softmac ucode handling Franky Lin
2011-09-29 22:34 ` [PATCH v3 07/25] staging: brcm80211: removed unused softmac workaround Franky Lin
2011-09-29 22:34 ` [PATCH v3 08/25] staging: brcm80211: remove ht_cap field from brcms_c_info structure Franky Lin
2011-09-29 22:34 ` [PATCH v3 09/25] staging: brcm80211: use fragment number provided in transmit frame Franky Lin
2011-09-29 22:34 ` [PATCH v3 10/25] staging: brcm80211: remove unused function si_pmu_ilp_clock() Franky Lin
2011-09-29 22:34 ` [PATCH v3 11/25] staging: brcm80211: make device initializer table for wme constant Franky Lin
2011-09-29 22:34 ` [PATCH v3 12/25] staging: brcm80211: remove dongle firmware related debug code Franky Lin
2011-09-29 22:34 ` [PATCH v3 13/25] staging: brcm80211: remove unnecessary mac80211 callbacks Franky Lin
2011-09-29 22:34 ` [PATCH v3 14/25] staging: brcm80211: removed band related global vars from softmac Franky Lin
2011-09-29 22:34 ` [PATCH v3 15/25] staging: brcm80211: removed global var global_scb " Franky Lin
2011-09-29 22:34 ` [PATCH v3 16/25] staging: brcm80211: various global var related changes in softmac Franky Lin
2011-09-29 22:34 ` [PATCH v3 17/25] staging: brcm80211: removed global variable in softmac otp Franky Lin
2011-09-29 22:34 ` [PATCH v3 18/25] staging: brcm80211: changing interface to n-phy rssi compute function Franky Lin
2011-09-29 22:34 ` [PATCH v3 19/25] staging: brcm80211: change interface for common " Franky Lin
2011-09-29 22:34 ` [PATCH v3 20/25] staging: brcm80211: convert endianess before handling the frame Franky Lin
2011-09-29 22:34 ` [PATCH v3 21/25] staging: brcm80211: use endian annotated structures in brcmsmac Franky Lin
2011-10-10 14:35 ` Rafał Miłecki
2011-09-29 22:34 ` [PATCH v3 22/25] staging: brcm80211: move rssi computation to place we need it Franky Lin
2011-09-29 22:34 ` [PATCH v3 23/25] staging: brcm80211: use d11rxhdr structure in brcms_c_recover_tsf64() Franky Lin
2011-09-29 22:34 ` [PATCH v3 24/25] staging: brcm80211: simple changes to softmac phy variables Franky Lin
2011-09-29 22:34 ` [PATCH v3 25/25] staging: brcm80211: declared global vars in softmac phy as const Franky Lin
2011-10-03 23:23 ` [PATCH v3 00/25] staging: brcm80211: 8th reaction for mainline patch #2 Greg KH
2011-10-03 23:33 ` Franky Lin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1317335676-3424-3-git-send-email-frankyl@broadcom.com \
--to=frankyl@broadcom.com \
--cc=devel@linuxdriverproject.org \
--cc=gregkh@suse.de \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).