From: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
To: <linville@tuxdriver.com>
Cc: <linux-wireless@vger.kernel.org>,
Rajkumar Manoharan <rmanohar@qca.qualcomm.com>,
<stable@kernel.org>
Subject: [PATCH] ath9k_hw: Fix regression of register offset for AR9003 chips
Date: Thu, 20 Oct 2011 14:22:43 +0530 [thread overview]
Message-ID: <1319100763-9081-1-git-send-email-rmanohar@qca.qualcomm.com> (raw)
My recent commits (3782c69d, 324c74a) introduced regression
for register offset selection that based on the macversion.
Not using parentheses in proper manner for ternary operator
leads to select wrong offset for the registers.
This issue was observed with AR9462 chip that immediate disconnect
after the association with the following message
ieee80211 phy3: wlan0: Failed to send nullfunc to AP 00:23:69:12:ea:47
after 500ms, disconnecting.
Cc: stable@kernel.org
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
---
drivers/net/wireless/ath/ath9k/ar9003_phy.h | 24 ++++++++++++------------
1 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.h b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
index 2f4023e..70e0103 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
@@ -572,14 +572,14 @@
#define AR_PHY_TXGAIN_TABLE (AR_SM_BASE + 0x300)
-#define AR_PHY_TX_IQCAL_CONTROL_0 (AR_SM_BASE + AR_SREV_9485(ah) ? \
- 0x3c4 : 0x444)
-#define AR_PHY_TX_IQCAL_CONTROL_1 (AR_SM_BASE + AR_SREV_9485(ah) ? \
- 0x3c8 : 0x448)
-#define AR_PHY_TX_IQCAL_START (AR_SM_BASE + AR_SREV_9485(ah) ? \
- 0x3c4 : 0x440)
-#define AR_PHY_TX_IQCAL_STATUS_B0 (AR_SM_BASE + AR_SREV_9485(ah) ? \
- 0x3f0 : 0x48c)
+#define AR_PHY_TX_IQCAL_CONTROL_0 (AR_SM_BASE + (AR_SREV_9485(ah) ? \
+ 0x3c4 : 0x444))
+#define AR_PHY_TX_IQCAL_CONTROL_1 (AR_SM_BASE + (AR_SREV_9485(ah) ? \
+ 0x3c8 : 0x448))
+#define AR_PHY_TX_IQCAL_START (AR_SM_BASE + (AR_SREV_9485(ah) ? \
+ 0x3c4 : 0x440))
+#define AR_PHY_TX_IQCAL_STATUS_B0 (AR_SM_BASE + (AR_SREV_9485(ah) ? \
+ 0x3f0 : 0x48c))
#define AR_PHY_TX_IQCAL_CORR_COEFF_B0(_i) (AR_SM_BASE + \
(AR_SREV_9485(ah) ? \
0x3d0 : 0x450) + ((_i) << 2))
@@ -931,10 +931,10 @@
#define AR_PHY_AIC_SRAM_ADDR_B1 (AR_SM1_BASE + 0x5f0)
#define AR_PHY_AIC_SRAM_DATA_B1 (AR_SM1_BASE + 0x5f4)
-#define AR_PHY_RTT_TABLE_SW_INTF_B(i) (0x384 + (i) ? \
- AR_SM1_BASE : AR_SM_BASE)
-#define AR_PHY_RTT_TABLE_SW_INTF_1_B(i) (0x388 + (i) ? \
- AR_SM1_BASE : AR_SM_BASE)
+#define AR_PHY_RTT_TABLE_SW_INTF_B(i) (0x384 + ((i) ? \
+ AR_SM1_BASE : AR_SM_BASE))
+#define AR_PHY_RTT_TABLE_SW_INTF_1_B(i) (0x388 + ((i) ? \
+ AR_SM1_BASE : AR_SM_BASE))
/*
* Channel 2 Register Map
*/
--
1.7.7
reply other threads:[~2011-10-20 8:52 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1319100763-9081-1-git-send-email-rmanohar@qca.qualcomm.com \
--to=rmanohar@qca.qualcomm.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=stable@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox