From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from na3sys009aog101.obsmtp.com ([74.125.149.67]:55502 "HELO na3sys009aog101.obsmtp.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with SMTP id S1755103Ab1KQElp (ORCPT ); Wed, 16 Nov 2011 23:41:45 -0500 From: Bing Zhao To: linux-bluetooth@vger.kernel.org Cc: linux-wireless@vger.kernel.org, Gustavo Padovan , Bing Zhao , Frank Huang Subject: [PATCH] Bluetooth: btmrvl: support Marvell Bluetooth device SD8797 Date: Wed, 16 Nov 2011 20:40:42 -0800 Message-Id: <1321504842-11199-1-git-send-email-bzhao@marvell.com> (sfid-20111117_054152_670843_7EEEE9CA) Sender: linux-wireless-owner@vger.kernel.org List-ID: The SD8797 firmware image is shared with mwifiex driver. Whoever gets loaded first will be responsible for firmware downloading. Signed-off-by: Bing Zhao Signed-off-by: Frank Huang --- drivers/bluetooth/Kconfig | 6 +++--- drivers/bluetooth/btmrvl_sdio.c | 15 +++++++++++++-- 2 files changed, 16 insertions(+), 5 deletions(-) diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig index 11b41fd..5ccf142 100644 --- a/drivers/bluetooth/Kconfig +++ b/drivers/bluetooth/Kconfig @@ -188,7 +188,7 @@ config BT_MRVL The core driver to support Marvell Bluetooth devices. This driver is required if you want to support - Marvell Bluetooth devices, such as 8688/8787. + Marvell Bluetooth devices, such as 8688/8787/8797. Say Y here to compile Marvell Bluetooth driver into the kernel or say M to compile it as module. @@ -201,8 +201,8 @@ config BT_MRVL_SDIO The driver for Marvell Bluetooth chipsets with SDIO interface. This driver is required if you want to use Marvell Bluetooth - devices with SDIO interface. Currently SD8688/SD8787 chipsets are - supported. + devices with SDIO interface. Currently SD8688/SD8787/SD8797 + chipsets are supported. Say Y here to compile support for Marvell BT-over-SDIO driver into the kernel or say M to compile it as module. diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c index c827d73..37b5639 100644 --- a/drivers/bluetooth/btmrvl_sdio.c +++ b/drivers/bluetooth/btmrvl_sdio.c @@ -64,7 +64,7 @@ static const struct btmrvl_sdio_card_reg btmrvl_reg_8688 = { .io_port_1 = 0x01, .io_port_2 = 0x02, }; -static const struct btmrvl_sdio_card_reg btmrvl_reg_8787 = { +static const struct btmrvl_sdio_card_reg btmrvl_reg_87xx = { .cfg = 0x00, .host_int_mask = 0x02, .host_intstatus = 0x03, @@ -91,7 +91,14 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8688 = { static const struct btmrvl_sdio_device btmrvl_sdio_sd8787 = { .helper = NULL, .firmware = "mrvl/sd8787_uapsta.bin", - .reg = &btmrvl_reg_8787, + .reg = &btmrvl_reg_87xx, + .sd_blksz_fw_dl = 256, +}; + +static const struct btmrvl_sdio_device btmrvl_sdio_sd8797 = { + .helper = NULL, + .firmware = "mrvl/sd8797_uapsta.bin", + .reg = &btmrvl_reg_87xx, .sd_blksz_fw_dl = 256, }; @@ -102,6 +109,9 @@ static const struct sdio_device_id btmrvl_sdio_ids[] = { /* Marvell SD8787 Bluetooth device */ { SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x911A), .driver_data = (unsigned long) &btmrvl_sdio_sd8787 }, + /* Marvell SD8797 Bluetooth device */ + { SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x912A), + .driver_data = (unsigned long) &btmrvl_sdio_sd8797 }, { } /* Terminating entry */ }; @@ -1075,3 +1085,4 @@ MODULE_LICENSE("GPL v2"); MODULE_FIRMWARE("sd8688_helper.bin"); MODULE_FIRMWARE("sd8688.bin"); MODULE_FIRMWARE("mrvl/sd8787_uapsta.bin"); +MODULE_FIRMWARE("mrvl/sd8797_uapsta.bin"); -- 1.7.4.1