Linux wireless drivers development
 help / color / mirror / Atom feed
From: Luciano Coelho <coelho@ti.com>
To: Julian Calaby <julian.calaby@gmail.com>
Cc: linux-wireless@vger.kernel.org
Subject: Re: [PATCH 2/2] wl12xx: add operation to retrieve the MAC address from Fuse ROM
Date: Tue, 17 Jan 2012 05:48:22 +0200	[thread overview]
Message-ID: <1326772102.4598.63.camel@cumari> (raw)
In-Reply-To: <CAGRGNgVfJeEji1EtU5u_GfHN9sgKGEkDRg9ko7JdkMqUUFvFyw@mail.gmail.com>

On Tue, 2012-01-17 at 11:46 +1100, Julian Calaby wrote: 
> Hi Luciano,
> 
> On Tue, Jan 17, 2012 at 01:23, Luciano Coelho <coelho@ti.com> wrote:
> > Add a testmode command to retrieve the MAC address that is stored in
> > the Fuse ROM in newer PGs.  In old PGs this operation is not
> > supported.
> >
> > Signed-off-by: Luciano Coelho <coelho@ti.com>
> > ---
> >  drivers/net/wireless/wl12xx/boot.c     |    3 +-
> >  drivers/net/wireless/wl12xx/boot.h     |   10 ----
> >  drivers/net/wireless/wl12xx/reg.h      |   15 ++++++
> >  drivers/net/wireless/wl12xx/testmode.c |   87 ++++++++++++++++++++++++++++++++
> >  4 files changed, 104 insertions(+), 11 deletions(-)
> >
> > diff --git a/drivers/net/wireless/wl12xx/testmode.c b/drivers/net/wireless/wl12xx/testmode.c
> > index 25093c0..613e0b3 100644
> > --- a/drivers/net/wireless/wl12xx/testmode.c
> > +++ b/drivers/net/wireless/wl12xx/testmode.c
> > @@ -264,6 +266,89 @@ static int wl1271_tm_cmd_recover(struct wl1271 *wl, struct nlattr *tb[])
> >        return 0;
> >  }
> >
> > +static bool wl12xx_tm_mac_in_fuse(struct wl1271 *wl)
> > +{
> > +       bool supported = false;
> > +       u8 major, minor;
> > +
> > +       if (wl->chip.id == CHIP_ID_1283_PG20) {
> > +               major = (wl->hw_pg_ver & WL128X_PG_MAJOR_VER_MASK) >>
> > +                       WL128X_PG_MAJOR_VER_OFFSET;
> > +               minor = (wl->hw_pg_ver & WL128X_PG_MINOR_VER_MASK) >>
> > +                       WL128X_PG_MINOR_VER_OFFSET;
> > +
> > +               /* in wl128x we have the MAC address if the PG is >= (2, 1) */
> > +               if (major > 2 || (major == 2 && minor >= 1))
> > +                       supported = true;
> > +       } else {
> > +               major = (wl->hw_pg_ver & WL127X_PG_MAJOR_VER_MASK) >>
> > +                       WL127X_PG_MAJOR_VER_OFFSET;
> > +               minor = (wl->hw_pg_ver & WL127X_PG_MINOR_VER_MASK) >>
> > +                       WL127X_PG_MINOR_VER_OFFSET;
> > +
> > +               /* in wl127x we have the MAC address if the PG is >= (3, 1) */
> > +               if (major == 3 && minor >= 1)
> 
> Is this test correct? Do only major == 3 PGs support this command?

Yes, major == 3 and minor greater than or equal to 1.  Actually, there
can't be a major greater than 3, because it's only 2 bits, so 3 is the
maximum value.

-- 
Cheers,
Luca.


  reply	other threads:[~2012-01-17  3:48 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-01-16 14:23 [PATCH 0/2] wl12xx: read MAC from fuse rom Luciano Coelho
2012-01-16 14:23 ` [PATCH 1/2] wl12xx: move partition table definition to io.c Luciano Coelho
2012-01-16 14:23 ` [PATCH 2/2] wl12xx: add operation to retrieve the MAC address from Fuse ROM Luciano Coelho
2012-01-17  0:46   ` Julian Calaby
2012-01-17  3:48     ` Luciano Coelho [this message]
2012-01-17  3:51       ` Julian Calaby
2012-01-17  4:02         ` Luciano Coelho

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1326772102.4598.63.camel@cumari \
    --to=coelho@ti.com \
    --cc=julian.calaby@gmail.com \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox