From: Wey-Yi Guy <wey-yi.w.guy@intel.com>
To: linville@tuxdriver.com
Cc: linux-wireless@vger.kernel.org,
Emmanuel Grumbach <emmanuel.grumbach@intel.com>,
Wey-Yi Guy <wey-yi.w.guy@intel.com>
Subject: [PATCH 16/28] iwlwifi: consolidate the start_device flow
Date: Thu, 2 Feb 2012 15:09:07 -0800 [thread overview]
Message-ID: <1328224159-18134-17-git-send-email-wey-yi.w.guy@intel.com> (raw)
In-Reply-To: <1328224159-18134-1-git-send-email-wey-yi.w.guy@intel.com>
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Now there is only one transport function that launch a specific fw:
trans_ops->start_fw. This one replaces trans_ops->start_device and
trans_ops->kick_nic. The code that actually loads the fw to the
device has been moved to the transport specific code.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
---
drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c | 4 -
drivers/net/wireless/iwlwifi/iwl-trans-pcie.c | 88 +++++++++++++++++++---
drivers/net/wireless/iwlwifi/iwl-trans.h | 44 +++++------
drivers/net/wireless/iwlwifi/iwl-ucode.c | 87 ++--------------------
4 files changed, 103 insertions(+), 120 deletions(-)
diff --git a/drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c b/drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c
index ebea243..731f287 100644
--- a/drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c
@@ -1130,11 +1130,7 @@ void iwl_irq_tasklet(struct iwl_trans *trans)
isr_stats->tx++;
handled |= CSR_INT_BIT_FH_TX;
/* Wake up uCode load routine, now that load is complete */
-#ifdef CONFIG_IWLWIFI_IDI
- trans->shrd->trans->ucode_write_complete = 1;
-#else
trans->ucode_write_complete = 1;
-#endif
wake_up(&trans->shrd->wait_command_queue);
}
diff --git a/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c b/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c
index 362444a..1030a25 100644
--- a/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c
+++ b/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c
@@ -64,6 +64,7 @@
#include <linux/pci-aspm.h>
#include <linux/interrupt.h>
#include <linux/debugfs.h>
+#include <linux/sched.h>
#include <linux/bitops.h>
#include <linux/gfp.h>
@@ -895,7 +896,79 @@ static const u8 iwlagn_pan_ac_to_queue[] = {
7, 6, 5, 4,
};
-static int iwl_trans_pcie_start_device(struct iwl_trans *trans)
+/*
+ * ucode
+ */
+static int iwl_load_section(struct iwl_trans *trans, const char *name,
+ struct fw_desc *image, u32 dst_addr)
+{
+ dma_addr_t phy_addr = image->p_addr;
+ u32 byte_cnt = image->len;
+ int ret;
+
+ trans->ucode_write_complete = 0;
+
+ iwl_write_direct32(trans,
+ FH_TCSR_CHNL_TX_CONFIG_REG(FH_SRVC_CHNL),
+ FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_PAUSE);
+
+ iwl_write_direct32(trans,
+ FH_SRVC_CHNL_SRAM_ADDR_REG(FH_SRVC_CHNL), dst_addr);
+
+ iwl_write_direct32(trans,
+ FH_TFDIB_CTRL0_REG(FH_SRVC_CHNL),
+ phy_addr & FH_MEM_TFDIB_DRAM_ADDR_LSB_MSK);
+
+ iwl_write_direct32(trans,
+ FH_TFDIB_CTRL1_REG(FH_SRVC_CHNL),
+ (iwl_get_dma_hi_addr(phy_addr)
+ << FH_MEM_TFDIB_REG1_ADDR_BITSHIFT) | byte_cnt);
+
+ iwl_write_direct32(trans,
+ FH_TCSR_CHNL_TX_BUF_STS_REG(FH_SRVC_CHNL),
+ 1 << FH_TCSR_CHNL_TX_BUF_STS_REG_POS_TB_NUM |
+ 1 << FH_TCSR_CHNL_TX_BUF_STS_REG_POS_TB_IDX |
+ FH_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_VALID);
+
+ iwl_write_direct32(trans,
+ FH_TCSR_CHNL_TX_CONFIG_REG(FH_SRVC_CHNL),
+ FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE |
+ FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_DISABLE |
+ FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_ENDTFD);
+
+ IWL_DEBUG_FW(trans, "%s uCode section being loaded...\n", name);
+ ret = wait_event_timeout(trans->shrd->wait_command_queue,
+ trans->ucode_write_complete, 5 * HZ);
+ if (!ret) {
+ IWL_ERR(trans, "Could not load the %s uCode section\n",
+ name);
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+static int iwl_load_given_ucode(struct iwl_trans *trans, struct fw_img *image)
+{
+ int ret = 0;
+
+ ret = iwl_load_section(trans, "INST", &image->code,
+ IWLAGN_RTC_INST_LOWER_BOUND);
+ if (ret)
+ return ret;
+
+ ret = iwl_load_section(trans, "DATA", &image->data,
+ IWLAGN_RTC_DATA_LOWER_BOUND);
+ if (ret)
+ return ret;
+
+ /* Remove all resets to allow NIC to operate */
+ iwl_write32(trans, CSR_RESET, 0);
+
+ return 0;
+}
+
+static int iwl_trans_pcie_start_fw(struct iwl_trans *trans, struct fw_img *fw)
{
int ret;
struct iwl_trans_pcie *trans_pcie =
@@ -951,6 +1024,9 @@ static int iwl_trans_pcie_start_device(struct iwl_trans *trans)
iwl_write32(trans, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
iwl_write32(trans, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
+ /* Load the given image to the HW */
+ iwl_load_given_ucode(trans, fw);
+
return 0;
}
@@ -1353,12 +1429,6 @@ static int iwl_trans_pcie_tx(struct iwl_trans *trans, struct sk_buff *skb,
return 0;
}
-static void iwl_trans_pcie_kick_nic(struct iwl_trans *trans)
-{
- /* Remove all resets to allow NIC to operate */
- iwl_write32(trans, CSR_RESET, 0);
-}
-
static int iwl_trans_pcie_start_hw(struct iwl_trans *trans)
{
struct iwl_trans_pcie *trans_pcie =
@@ -2086,7 +2156,7 @@ const struct iwl_trans_ops trans_ops_pcie = {
.start_hw = iwl_trans_pcie_start_hw,
.stop_hw = iwl_trans_pcie_stop_hw,
.fw_alive = iwl_trans_pcie_fw_alive,
- .start_device = iwl_trans_pcie_start_device,
+ .start_fw = iwl_trans_pcie_start_fw,
.stop_device = iwl_trans_pcie_stop_device,
.wake_any_queue = iwl_trans_pcie_wake_any_queue,
@@ -2100,8 +2170,6 @@ const struct iwl_trans_ops trans_ops_pcie = {
.tx_agg_alloc = iwl_trans_pcie_tx_agg_alloc,
.tx_agg_setup = iwl_trans_pcie_tx_agg_setup,
- .kick_nic = iwl_trans_pcie_kick_nic,
-
.free = iwl_trans_pcie_free,
.stop_queue = iwl_trans_pcie_stop_queue,
diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h
index d0b6146..4d1ae65 100644
--- a/drivers/net/wireless/iwlwifi/iwl-trans.h
+++ b/drivers/net/wireless/iwlwifi/iwl-trans.h
@@ -131,13 +131,25 @@ struct iwl_host_cmd {
u8 id;
};
+/* one for each uCode image (inst/data, boot/init/runtime) */
+struct fw_desc {
+ dma_addr_t p_addr; /* hardware address */
+ void *v_addr; /* software address */
+ u32 len; /* size in bytes */
+};
+
+struct fw_img {
+ struct fw_desc code; /* firmware code image */
+ struct fw_desc data; /* firmware data image */
+};
+
/**
* struct iwl_trans_ops - transport specific operations
* @start_hw: starts the HW- from that point on, the HW can send interrupts
* @stop_hw: stops the HW- from that point on, the HW will be in low power but
* will still issue interrupt if the HW RF kill is triggered.
- * @start_device: allocates and inits all the resources for the transport
- * layer.
+ * @start_fw: allocates and inits all the resources for the transport
+ * layer. Also kick a fw image. This handler may sleep.
* @fw_alive: called when the fw sends alive notification
* @wake_any_queue: wake all the queues of a specfic context IWL_RXON_CTX_*
* @stop_device:stops the whole device (embedded CPU put to reset)
@@ -148,7 +160,6 @@ struct iwl_host_cmd {
* @tx_agg_setup: setup a tx queue for AMPDU - will be called once the HW is
* ready and a successful ADDBA response has been received.
* @tx_agg_disable: de-configure a Tx queue to send AMPDUs
- * @kick_nic: remove the RESET from the embedded CPU and let it run
* @free: release all the ressource for the transport layer itself such as
* irq, tasklet etc...
* @stop_queue: stop a specific queue
@@ -166,7 +177,7 @@ struct iwl_trans_ops {
int (*start_hw)(struct iwl_trans *iwl_trans);
void (*stop_hw)(struct iwl_trans *iwl_trans);
- int (*start_device)(struct iwl_trans *trans);
+ int (*start_fw)(struct iwl_trans *trans, struct fw_img *fw);
void (*fw_alive)(struct iwl_trans *trans);
void (*stop_device)(struct iwl_trans *trans);
@@ -191,8 +202,6 @@ struct iwl_trans_ops {
enum iwl_rxon_context_id ctx, int sta_id, int tid,
int frame_limit, u16 ssn);
- void (*kick_nic)(struct iwl_trans *trans);
-
void (*free)(struct iwl_trans *trans);
void (*stop_queue)(struct iwl_trans *trans, int q, const char *msg);
@@ -209,18 +218,6 @@ struct iwl_trans_ops {
u32 (*read32)(struct iwl_trans *trans, u32 ofs);
};
-/* one for each uCode image (inst/data, boot/init/runtime) */
-struct fw_desc {
- dma_addr_t p_addr; /* hardware address */
- void *v_addr; /* software address */
- u32 len; /* size in bytes */
-};
-
-struct fw_img {
- struct fw_desc code; /* firmware code image */
- struct fw_desc data; /* firmware data image */
-};
-
/* Opaque calibration results */
struct iwl_calib_result {
struct list_head list;
@@ -284,9 +281,11 @@ static inline void iwl_trans_fw_alive(struct iwl_trans *trans)
trans->ops->fw_alive(trans);
}
-static inline int iwl_trans_start_device(struct iwl_trans *trans)
+static inline int iwl_trans_start_fw(struct iwl_trans *trans, struct fw_img *fw)
{
- return trans->ops->start_device(trans);
+ might_sleep();
+
+ return trans->ops->start_fw(trans, fw);
}
static inline void iwl_trans_stop_device(struct iwl_trans *trans)
@@ -347,11 +346,6 @@ static inline void iwl_trans_tx_agg_setup(struct iwl_trans *trans,
trans->ops->tx_agg_setup(trans, ctx, sta_id, tid, frame_limit, ssn);
}
-static inline void iwl_trans_kick_nic(struct iwl_trans *trans)
-{
- trans->ops->kick_nic(trans);
-}
-
static inline void iwl_trans_free(struct iwl_trans *trans)
{
trans->ops->free(trans);
diff --git a/drivers/net/wireless/iwlwifi/iwl-ucode.c b/drivers/net/wireless/iwlwifi/iwl-ucode.c
index 793524a..87ce587 100644
--- a/drivers/net/wireless/iwlwifi/iwl-ucode.c
+++ b/drivers/net/wireless/iwlwifi/iwl-ucode.c
@@ -120,58 +120,6 @@ int iwl_alloc_fw_desc(struct iwl_trans *trans, struct fw_desc *desc,
return 0;
}
-/*
- * ucode
- */
-static int iwl_load_section(struct iwl_trans *trans, const char *name,
- struct fw_desc *image, u32 dst_addr)
-{
- dma_addr_t phy_addr = image->p_addr;
- u32 byte_cnt = image->len;
- int ret;
-
- trans->ucode_write_complete = 0;
-
- iwl_write_direct32(trans,
- FH_TCSR_CHNL_TX_CONFIG_REG(FH_SRVC_CHNL),
- FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_PAUSE);
-
- iwl_write_direct32(trans,
- FH_SRVC_CHNL_SRAM_ADDR_REG(FH_SRVC_CHNL), dst_addr);
-
- iwl_write_direct32(trans,
- FH_TFDIB_CTRL0_REG(FH_SRVC_CHNL),
- phy_addr & FH_MEM_TFDIB_DRAM_ADDR_LSB_MSK);
-
- iwl_write_direct32(trans,
- FH_TFDIB_CTRL1_REG(FH_SRVC_CHNL),
- (iwl_get_dma_hi_addr(phy_addr)
- << FH_MEM_TFDIB_REG1_ADDR_BITSHIFT) | byte_cnt);
-
- iwl_write_direct32(trans,
- FH_TCSR_CHNL_TX_BUF_STS_REG(FH_SRVC_CHNL),
- 1 << FH_TCSR_CHNL_TX_BUF_STS_REG_POS_TB_NUM |
- 1 << FH_TCSR_CHNL_TX_BUF_STS_REG_POS_TB_IDX |
- FH_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_VALID);
-
- iwl_write_direct32(trans,
- FH_TCSR_CHNL_TX_CONFIG_REG(FH_SRVC_CHNL),
- FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE |
- FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_DISABLE |
- FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_ENDTFD);
-
- IWL_DEBUG_FW(trans, "%s uCode section being loaded...\n", name);
- ret = wait_event_timeout(trans->shrd->wait_command_queue,
- trans->ucode_write_complete, 5 * HZ);
- if (!ret) {
- IWL_ERR(trans, "Could not load the %s uCode section\n",
- name);
- return -ETIMEDOUT;
- }
-
- return 0;
-}
-
static inline struct fw_img *iwl_get_ucode_image(struct iwl_trans *trans,
enum iwl_ucode_type ucode_type)
{
@@ -188,28 +136,6 @@ static inline struct fw_img *iwl_get_ucode_image(struct iwl_trans *trans,
return NULL;
}
-static int iwl_load_given_ucode(struct iwl_trans *trans,
- enum iwl_ucode_type ucode_type)
-{
- int ret = 0;
- struct fw_img *image = iwl_get_ucode_image(trans, ucode_type);
-
-
- if (!image) {
- IWL_ERR(trans, "Invalid ucode requested (%d)\n",
- ucode_type);
- return -EINVAL;
- }
-
- ret = iwl_load_section(trans, "INST", &image->code,
- IWLAGN_RTC_INST_LOWER_BOUND);
- if (ret)
- return ret;
-
- return iwl_load_section(trans, "DATA", &image->data,
- IWLAGN_RTC_DATA_LOWER_BOUND);
-}
-
/*
* Calibration
*/
@@ -646,28 +572,27 @@ int iwl_load_ucode_wait_alive(struct iwl_trans *trans,
{
struct iwl_notification_wait alive_wait;
struct iwl_alive_data alive_data;
+ struct fw_img *fw;
int ret;
enum iwl_ucode_type old_type;
- ret = iwl_trans_start_device(trans);
- if (ret)
- return ret;
-
iwl_init_notification_wait(trans->shrd, &alive_wait, REPLY_ALIVE,
iwl_alive_fn, &alive_data);
old_type = trans->shrd->ucode_type;
trans->shrd->ucode_type = ucode_type;
+ fw = iwl_get_ucode_image(trans, ucode_type);
- ret = iwl_load_given_ucode(trans, ucode_type);
+ if (!fw)
+ return -EINVAL;
+
+ ret = iwl_trans_start_fw(trans, fw);
if (ret) {
trans->shrd->ucode_type = old_type;
iwl_remove_notification(trans->shrd, &alive_wait);
return ret;
}
- iwl_trans_kick_nic(trans);
-
/*
* Some things may run in the background now, but we
* just wait for the ALIVE notification here.
--
1.7.0.4
next prev parent reply other threads:[~2012-02-03 0:16 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-02 23:08 [PATCH 00/28] update for 3.4: iwlwifi 2012-02-02 Wey-Yi Guy
2012-02-02 23:08 ` [PATCH 01/28] iwlwifi: add fw_alive to transport layer API, kill tx_start Wey-Yi Guy
2012-02-02 23:08 ` [PATCH 02/28] iwlwifi: Connect IDI transport to driver Wey-Yi Guy
2012-02-02 23:08 ` [PATCH 03/28] iwlwifi: separate the APM from the EEPROM Wey-Yi Guy
2012-02-02 23:08 ` [PATCH 04/28] iwlwifi: move the shrd memory from priv Wey-Yi Guy
2012-02-02 23:08 ` [PATCH 05/28] iwlwifi: allocate the transport from the bus layer Wey-Yi Guy
2012-02-02 23:08 ` [PATCH 06/28] iwlwifi: move the bus configuration to transport Wey-Yi Guy
2012-02-02 23:08 ` [PATCH 07/28] iwlwifi: the read / write register ops move " Wey-Yi Guy
2012-02-02 23:08 ` [PATCH 08/28] iwlwifi: give trans to all the read / write functions Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 09/28] iwlwifi: remove the pointer to dev from the bus layer Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 10/28] iwlwifi: don't use the bus for ucode fw_desc any more Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 11/28] iwlwifi: rename trans_ops->request_irq to trans_ops->start_hw Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 12/28] iwlwifi: move prepare_card_hw to start_hw Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 13/28] iwlwifi: move apm_init " Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 14/28] iwlwifi: introduce trans_ops->stop_hw Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 15/28] iwlwifi: move the RF kill logic from iwl_probe to transport Wey-Yi Guy
2012-02-02 23:09 ` Wey-Yi Guy [this message]
2012-02-02 23:09 ` [PATCH 17/28] iwlwifi: kill bus_apm_config Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 18/28] iwlwifi: kill bus_is_pm_supported Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 19/28] iwlwifi: kill bus_get_hw_id_string Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 20/28] iwlwifi: kill bus_get_hw_id Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 21/28] iwlwifi: move hw_rev to transport layer Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 22/28] iwlwifi: stop_hw replace enable_rfkill_int Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 23/28] iwlwifi: debug print in tx_queue_set_status is more clear Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 24/28] iwlwifi: clarify comment Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 25/28] iwlwifi: move bcast_sta_id init to common routine Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 26/28] iwlwifi: move all ucode routines to iwl-ucode.c Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 27/28] iwlwifi: release IRQ in error path Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 28/28] iwlwifi: range check to testmode direct reg access Wey-Yi Guy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1328224159-18134-17-git-send-email-wey-yi.w.guy@intel.com \
--to=wey-yi.w.guy@intel.com \
--cc=emmanuel.grumbach@intel.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).