From: Wey-Yi Guy <wey-yi.w.guy@intel.com>
To: linville@tuxdriver.com
Cc: linux-wireless@vger.kernel.org,
Emmanuel Grumbach <emmanuel.grumbach@intel.com>,
Wey-Yi Guy <wey-yi.w.guy@intel.com>
Subject: [PATCH 17/28] iwlwifi: kill bus_apm_config
Date: Thu, 2 Feb 2012 15:09:08 -0800 [thread overview]
Message-ID: <1328224159-18134-18-git-send-email-wey-yi.w.guy@intel.com> (raw)
In-Reply-To: <1328224159-18134-1-git-send-email-wey-yi.w.guy@intel.com>
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
This handler was called from the transport layer only. Merge it
to the transport's apm_init.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
---
drivers/net/wireless/iwlwifi/iwl-bus.h | 7 ---
drivers/net/wireless/iwlwifi/iwl-pci.c | 29 --------------
drivers/net/wireless/iwlwifi/iwl-trans-pcie.c | 50 +++++++++++++++++++++++--
3 files changed, 46 insertions(+), 40 deletions(-)
diff --git a/drivers/net/wireless/iwlwifi/iwl-bus.h b/drivers/net/wireless/iwlwifi/iwl-bus.h
index 2065c5b..d385f69 100644
--- a/drivers/net/wireless/iwlwifi/iwl-bus.h
+++ b/drivers/net/wireless/iwlwifi/iwl-bus.h
@@ -121,13 +121,11 @@ struct iwl_bus;
/**
* struct iwl_bus_ops - bus specific operations
* @get_pm_support: must returns true if the bus can go to sleep
- * @apm_config: will be called during the config of the APM
* @get_hw_id_string: prints the hw_id in the provided buffer
* @get_hw_id: get hw_id in u32
*/
struct iwl_bus_ops {
bool (*get_pm_support)(struct iwl_bus *bus);
- void (*apm_config)(struct iwl_bus *bus);
void (*get_hw_id_string)(struct iwl_bus *bus, char buf[], int buf_len);
u32 (*get_hw_id)(struct iwl_bus *bus);
};
@@ -156,11 +154,6 @@ static inline bool bus_get_pm_support(struct iwl_bus *bus)
return bus->ops->get_pm_support(bus);
}
-static inline void bus_apm_config(struct iwl_bus *bus)
-{
- bus->ops->apm_config(bus);
-}
-
static inline void bus_get_hw_id_string(struct iwl_bus *bus, char buf[],
int buf_len)
{
diff --git a/drivers/net/wireless/iwlwifi/iwl-pci.c b/drivers/net/wireless/iwlwifi/iwl-pci.c
index 6451739..353022d 100644
--- a/drivers/net/wireless/iwlwifi/iwl-pci.c
+++ b/drivers/net/wireless/iwlwifi/iwl-pci.c
@@ -106,34 +106,6 @@ static bool iwl_pci_is_pm_supported(struct iwl_bus *bus)
return !(lctl & PCI_CFG_LINK_CTRL_VAL_L0S_EN);
}
-static void iwl_pci_apm_config(struct iwl_bus *bus)
-{
- /*
- * HW bug W/A for instability in PCIe bus L0S->L1 transition.
- * Check if BIOS (or OS) enabled L1-ASPM on this device.
- * If so (likely), disable L0S, so device moves directly L0->L1;
- * costs negligible amount of power savings.
- * If not (unlikely), enable L0S, so there is at least some
- * power savings, even without L1.
- */
- u16 lctl = iwl_pciexp_link_ctrl(bus);
-
- if ((lctl & PCI_CFG_LINK_CTRL_VAL_L1_EN) ==
- PCI_CFG_LINK_CTRL_VAL_L1_EN) {
- /* L1-ASPM enabled; disable(!) L0S */
- iwl_set_bit(trans(bus), CSR_GIO_REG,
- CSR_GIO_REG_VAL_L0S_ENABLED);
- dev_printk(KERN_INFO, trans(bus)->dev,
- "L1 Enabled; Disabling L0S\n");
- } else {
- /* L1-ASPM disabled; enable(!) L0S */
- iwl_clear_bit(trans(bus), CSR_GIO_REG,
- CSR_GIO_REG_VAL_L0S_ENABLED);
- dev_printk(KERN_INFO, trans(bus)->dev,
- "L1 Disabled; Enabling L0S\n");
- }
-}
-
static void iwl_pci_get_hw_id_string(struct iwl_bus *bus, char buf[],
int buf_len)
{
@@ -152,7 +124,6 @@ static u32 iwl_pci_get_hw_id(struct iwl_bus *bus)
static const struct iwl_bus_ops bus_ops_pci = {
.get_pm_support = iwl_pci_is_pm_supported,
- .apm_config = iwl_pci_apm_config,
.get_hw_id_string = iwl_pci_get_hw_id_string,
.get_hw_id = iwl_pci_get_hw_id,
};
diff --git a/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c b/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c
index 1030a25..c9fe888 100644
--- a/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c
+++ b/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c
@@ -633,6 +633,51 @@ static void iwl_set_pwr_vmain(struct iwl_trans *trans)
~APMG_PS_CTRL_MSK_PWR_SRC);
}
+/* PCI registers */
+#define PCI_CFG_RETRY_TIMEOUT 0x041
+#define PCI_CFG_LINK_CTRL_VAL_L0S_EN 0x01
+#define PCI_CFG_LINK_CTRL_VAL_L1_EN 0x02
+
+static u16 iwl_pciexp_link_ctrl(struct iwl_trans *trans)
+{
+ int pos;
+ u16 pci_lnk_ctl;
+ struct iwl_trans_pcie *trans_pcie =
+ IWL_TRANS_GET_PCIE_TRANS(trans);
+
+ struct pci_dev *pci_dev = trans_pcie->pci_dev;
+
+ pos = pci_pcie_cap(pci_dev);
+ pci_read_config_word(pci_dev, pos + PCI_EXP_LNKCTL, &pci_lnk_ctl);
+ return pci_lnk_ctl;
+}
+
+static void iwl_apm_config(struct iwl_trans *trans)
+{
+ /*
+ * HW bug W/A for instability in PCIe bus L0S->L1 transition.
+ * Check if BIOS (or OS) enabled L1-ASPM on this device.
+ * If so (likely), disable L0S, so device moves directly L0->L1;
+ * costs negligible amount of power savings.
+ * If not (unlikely), enable L0S, so there is at least some
+ * power savings, even without L1.
+ */
+ u16 lctl = iwl_pciexp_link_ctrl(trans);
+
+ if ((lctl & PCI_CFG_LINK_CTRL_VAL_L1_EN) ==
+ PCI_CFG_LINK_CTRL_VAL_L1_EN) {
+ /* L1-ASPM enabled; disable(!) L0S */
+ iwl_set_bit(trans, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
+ dev_printk(KERN_INFO, trans->dev,
+ "L1 Enabled; Disabling L0S\n");
+ } else {
+ /* L1-ASPM disabled; enable(!) L0S */
+ iwl_clear_bit(trans, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
+ dev_printk(KERN_INFO, trans->dev,
+ "L1 Disabled; Enabling L0S\n");
+ }
+}
+
/*
* Start up NIC's basic functionality after it has been reset
* (e.g. after platform boot, or shutdown via iwl_apm_stop())
@@ -669,7 +714,7 @@ static int iwl_apm_init(struct iwl_trans *trans)
iwl_set_bit(trans, CSR_HW_IF_CONFIG_REG,
CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A);
- bus_apm_config(bus(trans));
+ iwl_apm_config(trans);
/* Configure analog phase-lock-loop before activating to D0A */
if (cfg(trans)->base_params->pll_cfg_val)
@@ -2187,9 +2232,6 @@ const struct iwl_trans_ops trans_ops_pcie = {
.read32 = iwl_trans_pcie_read32,
};
-/* PCI registers */
-#define PCI_CFG_RETRY_TIMEOUT 0x041
-
struct iwl_trans *iwl_trans_pcie_alloc(struct iwl_shared *shrd,
struct pci_dev *pdev,
const struct pci_device_id *ent)
--
1.7.0.4
next prev parent reply other threads:[~2012-02-03 0:16 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-02 23:08 [PATCH 00/28] update for 3.4: iwlwifi 2012-02-02 Wey-Yi Guy
2012-02-02 23:08 ` [PATCH 01/28] iwlwifi: add fw_alive to transport layer API, kill tx_start Wey-Yi Guy
2012-02-02 23:08 ` [PATCH 02/28] iwlwifi: Connect IDI transport to driver Wey-Yi Guy
2012-02-02 23:08 ` [PATCH 03/28] iwlwifi: separate the APM from the EEPROM Wey-Yi Guy
2012-02-02 23:08 ` [PATCH 04/28] iwlwifi: move the shrd memory from priv Wey-Yi Guy
2012-02-02 23:08 ` [PATCH 05/28] iwlwifi: allocate the transport from the bus layer Wey-Yi Guy
2012-02-02 23:08 ` [PATCH 06/28] iwlwifi: move the bus configuration to transport Wey-Yi Guy
2012-02-02 23:08 ` [PATCH 07/28] iwlwifi: the read / write register ops move " Wey-Yi Guy
2012-02-02 23:08 ` [PATCH 08/28] iwlwifi: give trans to all the read / write functions Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 09/28] iwlwifi: remove the pointer to dev from the bus layer Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 10/28] iwlwifi: don't use the bus for ucode fw_desc any more Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 11/28] iwlwifi: rename trans_ops->request_irq to trans_ops->start_hw Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 12/28] iwlwifi: move prepare_card_hw to start_hw Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 13/28] iwlwifi: move apm_init " Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 14/28] iwlwifi: introduce trans_ops->stop_hw Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 15/28] iwlwifi: move the RF kill logic from iwl_probe to transport Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 16/28] iwlwifi: consolidate the start_device flow Wey-Yi Guy
2012-02-02 23:09 ` Wey-Yi Guy [this message]
2012-02-02 23:09 ` [PATCH 18/28] iwlwifi: kill bus_is_pm_supported Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 19/28] iwlwifi: kill bus_get_hw_id_string Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 20/28] iwlwifi: kill bus_get_hw_id Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 21/28] iwlwifi: move hw_rev to transport layer Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 22/28] iwlwifi: stop_hw replace enable_rfkill_int Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 23/28] iwlwifi: debug print in tx_queue_set_status is more clear Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 24/28] iwlwifi: clarify comment Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 25/28] iwlwifi: move bcast_sta_id init to common routine Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 26/28] iwlwifi: move all ucode routines to iwl-ucode.c Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 27/28] iwlwifi: release IRQ in error path Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 28/28] iwlwifi: range check to testmode direct reg access Wey-Yi Guy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1328224159-18134-18-git-send-email-wey-yi.w.guy@intel.com \
--to=wey-yi.w.guy@intel.com \
--cc=emmanuel.grumbach@intel.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).