From: Wey-Yi Guy <wey-yi.w.guy@intel.com>
To: linville@tuxdriver.com
Cc: linux-wireless@vger.kernel.org,
Emmanuel Grumbach <emmanuel.grumbach@intel.com>,
Wey-Yi Guy <wey-yi.w.guy@intel.com>
Subject: [PATCH 18/28] iwlwifi: kill bus_is_pm_supported
Date: Thu, 2 Feb 2012 15:09:09 -0800 [thread overview]
Message-ID: <1328224159-18134-19-git-send-email-wey-yi.w.guy@intel.com> (raw)
In-Reply-To: <1328224159-18134-1-git-send-email-wey-yi.w.guy@intel.com>
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Get this information from the transport layer which is now in charge
of the APM too.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
---
drivers/net/wireless/iwlwifi/iwl-bus.h | 7 -------
drivers/net/wireless/iwlwifi/iwl-pci.c | 20 --------------------
drivers/net/wireless/iwlwifi/iwl-power.c | 2 +-
drivers/net/wireless/iwlwifi/iwl-trans-pcie.c | 1 +
drivers/net/wireless/iwlwifi/iwl-trans.h | 2 ++
5 files changed, 4 insertions(+), 28 deletions(-)
diff --git a/drivers/net/wireless/iwlwifi/iwl-bus.h b/drivers/net/wireless/iwlwifi/iwl-bus.h
index d385f69..2b0b48e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-bus.h
+++ b/drivers/net/wireless/iwlwifi/iwl-bus.h
@@ -120,12 +120,10 @@ struct iwl_bus;
/**
* struct iwl_bus_ops - bus specific operations
- * @get_pm_support: must returns true if the bus can go to sleep
* @get_hw_id_string: prints the hw_id in the provided buffer
* @get_hw_id: get hw_id in u32
*/
struct iwl_bus_ops {
- bool (*get_pm_support)(struct iwl_bus *bus);
void (*get_hw_id_string)(struct iwl_bus *bus, char buf[], int buf_len);
u32 (*get_hw_id)(struct iwl_bus *bus);
};
@@ -149,11 +147,6 @@ struct iwl_bus {
char bus_specific[0] __attribute__((__aligned__(sizeof(void *))));
};
-static inline bool bus_get_pm_support(struct iwl_bus *bus)
-{
- return bus->ops->get_pm_support(bus);
-}
-
static inline void bus_get_hw_id_string(struct iwl_bus *bus, char buf[],
int buf_len)
{
diff --git a/drivers/net/wireless/iwlwifi/iwl-pci.c b/drivers/net/wireless/iwlwifi/iwl-pci.c
index 353022d..0c16efe 100644
--- a/drivers/net/wireless/iwlwifi/iwl-pci.c
+++ b/drivers/net/wireless/iwlwifi/iwl-pci.c
@@ -87,25 +87,6 @@ struct iwl_pci_bus {
#define IWL_BUS_GET_PCI_DEV(_iwl_bus) \
((IWL_BUS_GET_PCI_BUS(_iwl_bus))->pci_dev)
-static u16 iwl_pciexp_link_ctrl(struct iwl_bus *bus)
-{
- int pos;
- u16 pci_lnk_ctl;
-
- struct pci_dev *pci_dev = IWL_BUS_GET_PCI_DEV(bus);
-
- pos = pci_pcie_cap(pci_dev);
- pci_read_config_word(pci_dev, pos + PCI_EXP_LNKCTL, &pci_lnk_ctl);
- return pci_lnk_ctl;
-}
-
-static bool iwl_pci_is_pm_supported(struct iwl_bus *bus)
-{
- u16 lctl = iwl_pciexp_link_ctrl(bus);
-
- return !(lctl & PCI_CFG_LINK_CTRL_VAL_L0S_EN);
-}
-
static void iwl_pci_get_hw_id_string(struct iwl_bus *bus, char buf[],
int buf_len)
{
@@ -123,7 +104,6 @@ static u32 iwl_pci_get_hw_id(struct iwl_bus *bus)
}
static const struct iwl_bus_ops bus_ops_pci = {
- .get_pm_support = iwl_pci_is_pm_supported,
.get_hw_id_string = iwl_pci_get_hw_id_string,
.get_hw_id = iwl_pci_get_hw_id,
};
diff --git a/drivers/net/wireless/iwlwifi/iwl-power.c b/drivers/net/wireless/iwlwifi/iwl-power.c
index c7394ef..fd008c4 100644
--- a/drivers/net/wireless/iwlwifi/iwl-power.c
+++ b/drivers/net/wireless/iwlwifi/iwl-power.c
@@ -436,7 +436,7 @@ int iwl_power_update_mode(struct iwl_priv *priv, bool force)
/* initialize to default */
void iwl_power_initialize(struct iwl_priv *priv)
{
- priv->power_data.bus_pm = bus_get_pm_support(bus(priv));
+ priv->power_data.bus_pm = trans(priv)->pm_support;
priv->power_data.debug_sleep_level_override = -1;
diff --git a/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c b/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c
index c9fe888..8ebb5a5 100644
--- a/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c
+++ b/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c
@@ -676,6 +676,7 @@ static void iwl_apm_config(struct iwl_trans *trans)
dev_printk(KERN_INFO, trans->dev,
"L1 Disabled; Enabling L0S\n");
}
+ trans->pm_support = !(lctl & PCI_CFG_LINK_CTRL_VAL_L0S_EN);
}
/*
diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h
index 4d1ae65..7f6963f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-trans.h
+++ b/drivers/net/wireless/iwlwifi/iwl-trans.h
@@ -239,6 +239,7 @@ struct iwl_calib_result {
* @ucode_init: init ucode image
* @ucode_wowlan: wake on wireless ucode image (optional)
* @nvm_device_type: indicates OTP or eeprom
+ * @pm_support: set to true in start_hw if link pm is supported
* @calib_results: list head for init calibration results
*/
struct iwl_trans {
@@ -257,6 +258,7 @@ struct iwl_trans {
/* eeprom related variables */
int nvm_device_type;
+ bool pm_support;
/* init calibration results */
struct list_head calib_results;
--
1.7.0.4
next prev parent reply other threads:[~2012-02-03 0:16 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-02 23:08 [PATCH 00/28] update for 3.4: iwlwifi 2012-02-02 Wey-Yi Guy
2012-02-02 23:08 ` [PATCH 01/28] iwlwifi: add fw_alive to transport layer API, kill tx_start Wey-Yi Guy
2012-02-02 23:08 ` [PATCH 02/28] iwlwifi: Connect IDI transport to driver Wey-Yi Guy
2012-02-02 23:08 ` [PATCH 03/28] iwlwifi: separate the APM from the EEPROM Wey-Yi Guy
2012-02-02 23:08 ` [PATCH 04/28] iwlwifi: move the shrd memory from priv Wey-Yi Guy
2012-02-02 23:08 ` [PATCH 05/28] iwlwifi: allocate the transport from the bus layer Wey-Yi Guy
2012-02-02 23:08 ` [PATCH 06/28] iwlwifi: move the bus configuration to transport Wey-Yi Guy
2012-02-02 23:08 ` [PATCH 07/28] iwlwifi: the read / write register ops move " Wey-Yi Guy
2012-02-02 23:08 ` [PATCH 08/28] iwlwifi: give trans to all the read / write functions Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 09/28] iwlwifi: remove the pointer to dev from the bus layer Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 10/28] iwlwifi: don't use the bus for ucode fw_desc any more Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 11/28] iwlwifi: rename trans_ops->request_irq to trans_ops->start_hw Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 12/28] iwlwifi: move prepare_card_hw to start_hw Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 13/28] iwlwifi: move apm_init " Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 14/28] iwlwifi: introduce trans_ops->stop_hw Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 15/28] iwlwifi: move the RF kill logic from iwl_probe to transport Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 16/28] iwlwifi: consolidate the start_device flow Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 17/28] iwlwifi: kill bus_apm_config Wey-Yi Guy
2012-02-02 23:09 ` Wey-Yi Guy [this message]
2012-02-02 23:09 ` [PATCH 19/28] iwlwifi: kill bus_get_hw_id_string Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 20/28] iwlwifi: kill bus_get_hw_id Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 21/28] iwlwifi: move hw_rev to transport layer Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 22/28] iwlwifi: stop_hw replace enable_rfkill_int Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 23/28] iwlwifi: debug print in tx_queue_set_status is more clear Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 24/28] iwlwifi: clarify comment Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 25/28] iwlwifi: move bcast_sta_id init to common routine Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 26/28] iwlwifi: move all ucode routines to iwl-ucode.c Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 27/28] iwlwifi: release IRQ in error path Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 28/28] iwlwifi: range check to testmode direct reg access Wey-Yi Guy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1328224159-18134-19-git-send-email-wey-yi.w.guy@intel.com \
--to=wey-yi.w.guy@intel.com \
--cc=emmanuel.grumbach@intel.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).