From: Wey-Yi Guy <wey-yi.w.guy@intel.com>
To: linville@tuxdriver.com
Cc: linux-wireless@vger.kernel.org,
Gregory Greenman <gregory.greenman@intel.com>,
Wey-Yi Guy <wey-yi.w.guy@intel.com>
Subject: [PATCH 02/28] iwlwifi: Connect IDI transport to driver.
Date: Thu, 2 Feb 2012 15:08:53 -0800 [thread overview]
Message-ID: <1328224159-18134-3-git-send-email-wey-yi.w.guy@intel.com> (raw)
In-Reply-To: <1328224159-18134-1-git-send-email-wey-yi.w.guy@intel.com>
From: Gregory Greenman <gregory.greenman@intel.com>
This patch connects IDI transport to driver. It does so
by using a number of ifdefs at this stage.
IDI is a new transport that is under development.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
---
drivers/net/wireless/iwlwifi/iwl-pci.c | 4 ++++
drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c | 13 ++++++++++++-
drivers/net/wireless/iwlwifi/iwl-trans-pcie.c | 7 ++++++-
drivers/net/wireless/iwlwifi/iwl-trans.h | 1 +
4 files changed, 23 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/iwlwifi/iwl-pci.c b/drivers/net/wireless/iwlwifi/iwl-pci.c
index 03702a2..2c46063 100644
--- a/drivers/net/wireless/iwlwifi/iwl-pci.c
+++ b/drivers/net/wireless/iwlwifi/iwl-pci.c
@@ -454,7 +454,11 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
bus->irq = pdev->irq;
bus->ops = &bus_ops_pci;
+#ifdef CONFIG_IWLWIFI_IDI
+ err = iwl_probe(bus, &trans_ops_idi, cfg);
+#else
err = iwl_probe(bus, &trans_ops_pcie, cfg);
+#endif
if (err)
goto out_disable_msi;
return 0;
diff --git a/drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c b/drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c
index 2822b7e..b94c953 100644
--- a/drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c
@@ -35,6 +35,10 @@
#include "iwl-io.h"
#include "iwl-trans-pcie-int.h"
+#ifdef CONFIG_IWLWIFI_IDI
+#include "iwl-amfh.h"
+#endif
+
/******************************************************************************
*
* RX path functions
@@ -1100,8 +1104,11 @@ void iwl_irq_tasklet(struct iwl_trans *trans)
/* Disable periodic interrupt; we use it as just a one-shot. */
iwl_write8(bus(trans), CSR_INT_PERIODIC_REG,
CSR_INT_PERIODIC_DIS);
+#ifdef CONFIG_IWLWIFI_IDI
+ iwl_amfh_rx_handler();
+#else
iwl_rx_handle(trans);
-
+#endif
/*
* Enable periodic interrupt in 8 msec only if we received
* real RX interrupt (instead of just periodic int), to catch
@@ -1123,7 +1130,11 @@ void iwl_irq_tasklet(struct iwl_trans *trans)
isr_stats->tx++;
handled |= CSR_INT_BIT_FH_TX;
/* Wake up uCode load routine, now that load is complete */
+#ifdef CONFIG_IWLWIFI_IDI
+ trans->shrd->trans->ucode_write_complete = 1;
+#else
trans->ucode_write_complete = 1;
+#endif
wake_up(&trans->shrd->wait_command_queue);
}
diff --git a/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c b/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c
index affa56f..0b4280c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c
+++ b/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c
@@ -647,8 +647,10 @@ static int iwl_nic_init(struct iwl_trans *trans)
iwl_nic_config(priv(trans));
+#ifndef CONFIG_IWLWIFI_IDI
/* Allocate the RX queue, or reset if it is already allocated */
iwl_rx_init(trans);
+#endif
/* Allocate or reset and init all Tx and Command queues */
if (iwl_tx_init(trans))
@@ -1016,8 +1018,9 @@ static void iwl_trans_pcie_stop_device(struct iwl_trans *trans)
*/
if (test_bit(STATUS_DEVICE_ENABLED, &trans->shrd->status)) {
iwl_trans_tx_stop(trans);
+#ifndef CONFIG_IWLWIFI_IDI
iwl_trans_rx_stop(trans);
-
+#endif
/* Power-down device's busmaster DMA clocks */
iwl_write_prph(bus(trans), APMG_CLK_DIS_REG,
APMG_CLK_VAL_DMA_CLK_RQT);
@@ -1298,7 +1301,9 @@ static void iwl_trans_pcie_free(struct iwl_trans *trans)
{
iwl_calib_free_results(trans);
iwl_trans_pcie_tx_free(trans);
+#ifndef CONFIG_IWLWIFI_IDI
iwl_trans_pcie_rx_free(trans);
+#endif
free_irq(bus(trans)->irq, trans);
iwl_free_isr_ict(trans);
trans->shrd->trans = NULL;
diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h
index 9795a23..2a6649c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-trans.h
+++ b/drivers/net/wireless/iwlwifi/iwl-trans.h
@@ -383,6 +383,7 @@ static inline int iwl_trans_resume(struct iwl_trans *trans)
* Transport layers implementations
******************************************************/
extern const struct iwl_trans_ops trans_ops_pcie;
+extern const struct iwl_trans_ops trans_ops_idi;
int iwl_alloc_fw_desc(struct iwl_bus *bus, struct fw_desc *desc,
const void *data, size_t len);
--
1.7.0.4
next prev parent reply other threads:[~2012-02-03 0:16 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-02 23:08 [PATCH 00/28] update for 3.4: iwlwifi 2012-02-02 Wey-Yi Guy
2012-02-02 23:08 ` [PATCH 01/28] iwlwifi: add fw_alive to transport layer API, kill tx_start Wey-Yi Guy
2012-02-02 23:08 ` Wey-Yi Guy [this message]
2012-02-02 23:08 ` [PATCH 03/28] iwlwifi: separate the APM from the EEPROM Wey-Yi Guy
2012-02-02 23:08 ` [PATCH 04/28] iwlwifi: move the shrd memory from priv Wey-Yi Guy
2012-02-02 23:08 ` [PATCH 05/28] iwlwifi: allocate the transport from the bus layer Wey-Yi Guy
2012-02-02 23:08 ` [PATCH 06/28] iwlwifi: move the bus configuration to transport Wey-Yi Guy
2012-02-02 23:08 ` [PATCH 07/28] iwlwifi: the read / write register ops move " Wey-Yi Guy
2012-02-02 23:08 ` [PATCH 08/28] iwlwifi: give trans to all the read / write functions Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 09/28] iwlwifi: remove the pointer to dev from the bus layer Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 10/28] iwlwifi: don't use the bus for ucode fw_desc any more Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 11/28] iwlwifi: rename trans_ops->request_irq to trans_ops->start_hw Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 12/28] iwlwifi: move prepare_card_hw to start_hw Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 13/28] iwlwifi: move apm_init " Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 14/28] iwlwifi: introduce trans_ops->stop_hw Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 15/28] iwlwifi: move the RF kill logic from iwl_probe to transport Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 16/28] iwlwifi: consolidate the start_device flow Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 17/28] iwlwifi: kill bus_apm_config Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 18/28] iwlwifi: kill bus_is_pm_supported Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 19/28] iwlwifi: kill bus_get_hw_id_string Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 20/28] iwlwifi: kill bus_get_hw_id Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 21/28] iwlwifi: move hw_rev to transport layer Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 22/28] iwlwifi: stop_hw replace enable_rfkill_int Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 23/28] iwlwifi: debug print in tx_queue_set_status is more clear Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 24/28] iwlwifi: clarify comment Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 25/28] iwlwifi: move bcast_sta_id init to common routine Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 26/28] iwlwifi: move all ucode routines to iwl-ucode.c Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 27/28] iwlwifi: release IRQ in error path Wey-Yi Guy
2012-02-02 23:09 ` [PATCH 28/28] iwlwifi: range check to testmode direct reg access Wey-Yi Guy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1328224159-18134-3-git-send-email-wey-yi.w.guy@intel.com \
--to=wey-yi.w.guy@intel.com \
--cc=gregory.greenman@intel.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).