* [PATCH] Add AD-HOC support to the rtl8187 based on the rtl8180 source
@ 2012-02-23 18:50 Attila Fazekas
2012-02-23 23:49 ` Larry Finger
2012-03-05 23:59 ` Larry Finger
0 siblings, 2 replies; 3+ messages in thread
From: Attila Fazekas @ 2012-02-23 18:50 UTC (permalink / raw)
To: linux-wireless, linville; +Cc: Attila Fazekas
Add AD-HOC support to the rtl8187 based on the rtl8180 source
Signed-off-by: Attila Fazekas <turul64@gmail.com>
---
drivers/net/wireless/rtl818x/rtl8187/dev.c | 110 +++++++++++++++++++----
drivers/net/wireless/rtl818x/rtl8187/rtl8187.h | 9 ++
2 files changed, 100 insertions(+), 19 deletions(-)
diff --git a/drivers/net/wireless/rtl818x/rtl8187/dev.c b/drivers/net/wireless/rtl818x/rtl8187/dev.c
index 638fbef..cf53ac9 100644
--- a/drivers/net/wireless/rtl818x/rtl8187/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8187/dev.c
@@ -8,7 +8,7 @@
* Copyright 2005 Andrea Merello <andreamrl@tiscali.it>, et al.
*
* The driver was extended to the RTL8187B in 2008 by:
- * Herton Ronaldo Krzesinski <herton@mandriva.com.br>
+ * Herton Ronaldo Krzesinski <herton@mandriva.com.br>
* Hin-Tak Leung <htl10@users.sourceforge.net>
* Larry Finger <Larry.Finger@lwfinger.net>
*
@@ -232,6 +232,7 @@ static void rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
{
struct rtl8187_priv *priv = dev->priv;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ struct ieee80211_hdr *tx_hdr = (struct ieee80211_hdr *)(skb->data);
unsigned int ep;
void *buf;
struct urb *urb;
@@ -249,7 +250,7 @@ static void rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
flags |= RTL818X_TX_DESC_FLAG_NO_ENC;
flags |= ieee80211_get_tx_rate(dev, info)->hw_value << 24;
- if (ieee80211_has_morefrags(((struct ieee80211_hdr *)skb->data)->frame_control))
+ if (ieee80211_has_morefrags(tx_hdr->frame_control))
flags |= RTL818X_TX_DESC_FLAG_MOREFRAG;
if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) {
flags |= RTL818X_TX_DESC_FLAG_RTS;
@@ -261,6 +262,13 @@ static void rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19;
}
+ if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
+ if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
+ priv->seqno += 0x10;
+ tx_hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
+ tx_hdr->seq_ctrl |= cpu_to_le16(priv->seqno);
+ }
+
if (!priv->is_rtl8187b) {
struct rtl8187_tx_hdr *hdr =
(struct rtl8187_tx_hdr *)skb_push(skb, sizeof(*hdr));
@@ -274,8 +282,6 @@ static void rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
} else {
/* fc needs to be calculated before skb_push() */
unsigned int epmap[4] = { 6, 7, 5, 4 };
- struct ieee80211_hdr *tx_hdr =
- (struct ieee80211_hdr *)(skb->data);
u16 fc = le16_to_cpu(tx_hdr->frame_control);
struct rtl8187b_tx_hdr *hdr =
@@ -1031,10 +1037,61 @@ static void rtl8187_stop(struct ieee80211_hw *dev)
cancel_delayed_work_sync(&priv->work);
}
+static u64 rtl8187_get_tsf(struct ieee80211_hw *dev, struct ieee80211_vif *vif)
+{
+ struct rtl8187_priv *priv = dev->priv;
+
+ return rtl818x_ioread32(priv, &priv->map->TSFT[0]) |
+ (u64)(rtl818x_ioread32(priv, &priv->map->TSFT[1])) << 32;
+}
+
+
+static void rtl8187_beacon_work(struct work_struct *work)
+{
+ struct rtl8187_vif *vif_priv =
+ container_of(work, struct rtl8187_vif, beacon_work.work);
+ struct ieee80211_vif *vif =
+ container_of((void *)vif_priv, struct ieee80211_vif, drv_priv);
+ struct ieee80211_hw *dev = vif_priv->dev;
+ struct ieee80211_mgmt *mgmt;
+ struct sk_buff *skb;
+
+ /* don't overflow the tx ring */
+ if (ieee80211_queue_stopped(dev, 0))
+ goto resched;
+
+ /* grab a fresh beacon */
+ skb = ieee80211_beacon_get(dev, vif);
+ if (!skb)
+ goto resched;
+
+ /*
+ * update beacon timestamp w/ TSF value
+ * TODO: make hardware update beacon timestamp
+ */
+ mgmt = (struct ieee80211_mgmt *)skb->data;
+ mgmt->u.beacon.timestamp = cpu_to_le64(rtl8187_get_tsf(dev, vif));
+
+ /* TODO: use actual beacon queue */
+ skb_set_queue_mapping(skb, 0);
+
+ rtl8187_tx(dev, skb);
+
+resched:
+ /*
+ * schedule next beacon
+ * TODO: use hardware support for beacon timing
+ */
+ schedule_delayed_work(&vif_priv->beacon_work,
+ usecs_to_jiffies(1024 * vif->bss_conf.beacon_int));
+}
+
+
static int rtl8187_add_interface(struct ieee80211_hw *dev,
struct ieee80211_vif *vif)
{
struct rtl8187_priv *priv = dev->priv;
+ struct rtl8187_vif *vif_priv;
int i;
int ret = -EOPNOTSUPP;
@@ -1044,6 +1101,7 @@ static int rtl8187_add_interface(struct ieee80211_hw *dev,
switch (vif->type) {
case NL80211_IFTYPE_STATION:
+ case NL80211_IFTYPE_ADHOC:
break;
default:
goto exit;
@@ -1052,6 +1110,13 @@ static int rtl8187_add_interface(struct ieee80211_hw *dev,
ret = 0;
priv->vif = vif;
+ /* Initialize driver private area */
+ vif_priv = (struct rtl8187_vif *)&vif->drv_priv;
+ vif_priv->dev = dev;
+ INIT_DELAYED_WORK(&vif_priv->beacon_work, rtl8187_beacon_work);
+ vif_priv->enable_beacon = false;
+
+
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
for (i = 0; i < ETH_ALEN; i++)
rtl818x_iowrite8(priv, &priv->map->MAC[i],
@@ -1175,9 +1240,12 @@ static void rtl8187_bss_info_changed(struct ieee80211_hw *dev,
u32 changed)
{
struct rtl8187_priv *priv = dev->priv;
+ struct rtl8187_vif *vif_priv;
int i;
u8 reg;
+ vif_priv = (struct rtl8187_vif *)&vif->drv_priv;
+
if (changed & BSS_CHANGED_BSSID) {
mutex_lock(&priv->conf_mutex);
for (i = 0; i < ETH_ALEN; i++)
@@ -1189,8 +1257,12 @@ static void rtl8187_bss_info_changed(struct ieee80211_hw *dev,
else
reg = 0;
- if (is_valid_ether_addr(info->bssid))
- reg |= RTL818X_MSR_INFRA;
+ if (is_valid_ether_addr(info->bssid)) {
+ if (vif->type == NL80211_IFTYPE_ADHOC)
+ reg |= RTL818X_MSR_ADHOC;
+ else
+ reg |= RTL818X_MSR_INFRA;
+ }
else
reg |= RTL818X_MSR_NO_LINK;
@@ -1202,6 +1274,16 @@ static void rtl8187_bss_info_changed(struct ieee80211_hw *dev,
if (changed & (BSS_CHANGED_ERP_SLOT | BSS_CHANGED_ERP_PREAMBLE))
rtl8187_conf_erp(priv, info->use_short_slot,
info->use_short_preamble);
+
+ if (changed & BSS_CHANGED_BEACON_ENABLED)
+ vif_priv->enable_beacon = info->enable_beacon;
+
+ if (changed & (BSS_CHANGED_BEACON_ENABLED | BSS_CHANGED_BEACON)) {
+ cancel_delayed_work_sync(&vif_priv->beacon_work);
+ if (vif_priv->enable_beacon)
+ schedule_work(&vif_priv->beacon_work.work);
+ }
+
}
static u64 rtl8187_prepare_multicast(struct ieee80211_hw *dev,
@@ -1279,13 +1361,6 @@ static int rtl8187_conf_tx(struct ieee80211_hw *dev,
return 0;
}
-static u64 rtl8187_get_tsf(struct ieee80211_hw *dev, struct ieee80211_vif *vif)
-{
- struct rtl8187_priv *priv = dev->priv;
-
- return rtl818x_ioread32(priv, &priv->map->TSFT[0]) |
- (u64)(rtl818x_ioread32(priv, &priv->map->TSFT[1])) << 32;
-}
static const struct ieee80211_ops rtl8187_ops = {
.tx = rtl8187_tx,
@@ -1514,12 +1589,9 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
if (reg & 0xFF00)
priv->rfkill_mask = RFKILL_MASK_8198;
}
-
- /*
- * XXX: Once this driver supports anything that requires
- * beacons it must implement IEEE80211_TX_CTL_ASSIGN_SEQ.
- */
- dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
+ dev->vif_data_size = sizeof(struct rtl8187_vif);
+ dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_ADHOC) ;
if ((id->driver_info == DEVICE_RTL8187) && priv->is_rtl8187b)
printk(KERN_INFO "rtl8187: inconsistency between id with OEM"
diff --git a/drivers/net/wireless/rtl818x/rtl8187/rtl8187.h b/drivers/net/wireless/rtl818x/rtl8187/rtl8187.h
index f1cc907..e19a20a 100644
--- a/drivers/net/wireless/rtl818x/rtl8187/rtl8187.h
+++ b/drivers/net/wireless/rtl818x/rtl8187/rtl8187.h
@@ -89,6 +89,14 @@ enum {
DEVICE_RTL8187B
};
+struct rtl8187_vif {
+ struct ieee80211_hw *dev;
+
+ /* beaconing */
+ struct delayed_work beacon_work;
+ bool enable_beacon;
+};
+
struct rtl8187_priv {
/* common between rtl818x drivers */
struct rtl818x_csr *map;
@@ -141,6 +149,7 @@ struct rtl8187_priv {
__le32 bits32;
} *io_dmabuf;
bool rfkill_off;
+ u16 seqno;
};
void rtl8187_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data);
--
1.7.4.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] Add AD-HOC support to the rtl8187 based on the rtl8180 source
2012-02-23 18:50 [PATCH] Add AD-HOC support to the rtl8187 based on the rtl8180 source Attila Fazekas
@ 2012-02-23 23:49 ` Larry Finger
2012-03-05 23:59 ` Larry Finger
1 sibling, 0 replies; 3+ messages in thread
From: Larry Finger @ 2012-02-23 23:49 UTC (permalink / raw)
To: Attila Fazekas; +Cc: linux-wireless, linville
On 02/23/2012 12:50 PM, Attila Fazekas wrote:
> Add AD-HOC support to the rtl8187 based on the rtl8180 source
>
> Signed-off-by: Attila Fazekas<turul64@gmail.com>
You fixed the line wrapping problem. Good.
The subject of the mail should be "[PATCH] rtl8187: Add ....". That way the git
log has the component being changed in the title of the submit. If the driver
being patched is in the staging tree, then the line is "[PATCH] staging:
drivername: title". When submitting a revised version, then use "[PATCH v2] ...".
When I tested this patch, I was not able to even see beacons this time with
either an RTL8187L or RTL8187B. Could you please send me the commands or script
that you are using to set up the ad-hoc connection?
Thanks,
Larry
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] Add AD-HOC support to the rtl8187 based on the rtl8180 source
2012-02-23 18:50 [PATCH] Add AD-HOC support to the rtl8187 based on the rtl8180 source Attila Fazekas
2012-02-23 23:49 ` Larry Finger
@ 2012-03-05 23:59 ` Larry Finger
1 sibling, 0 replies; 3+ messages in thread
From: Larry Finger @ 2012-03-05 23:59 UTC (permalink / raw)
To: Attila Fazekas; +Cc: linux-wireless, linville
On 02/23/2012 12:50 PM, Attila Fazekas wrote:
> Add AD-HOC support to the rtl8187 based on the rtl8180 source
>
> Signed-off-by: Attila Fazekas<turul64@gmail.com>
> ---
> drivers/net/wireless/rtl818x/rtl8187/dev.c | 110 +++++++++++++++++++----
> drivers/net/wireless/rtl818x/rtl8187/rtl8187.h | 9 ++
> 2 files changed, 100 insertions(+), 19 deletions(-)
ACKed-by: Larry Finger <Larry.Finger@lwfinger.net>
Sorry, it took me so long to test this. I was able to make an ad-hoc connection
between an RTL8187L and an RTL8187B. The beacon interval is very long, which is
why I was unable to see them earlier.
Do you know what sets that interval? Is it in the driver?
Larry
>
> diff --git a/drivers/net/wireless/rtl818x/rtl8187/dev.c b/drivers/net/wireless/rtl818x/rtl8187/dev.c
> index 638fbef..cf53ac9 100644
> --- a/drivers/net/wireless/rtl818x/rtl8187/dev.c
> +++ b/drivers/net/wireless/rtl818x/rtl8187/dev.c
> @@ -8,7 +8,7 @@
> * Copyright 2005 Andrea Merello<andreamrl@tiscali.it>, et al.
> *
> * The driver was extended to the RTL8187B in 2008 by:
> - * Herton Ronaldo Krzesinski<herton@mandriva.com.br>
> + * Herton Ronaldo Krzesinski<herton@mandriva.com.br>
> * Hin-Tak Leung<htl10@users.sourceforge.net>
> * Larry Finger<Larry.Finger@lwfinger.net>
> *
> @@ -232,6 +232,7 @@ static void rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
> {
> struct rtl8187_priv *priv = dev->priv;
> struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
> + struct ieee80211_hdr *tx_hdr = (struct ieee80211_hdr *)(skb->data);
> unsigned int ep;
> void *buf;
> struct urb *urb;
> @@ -249,7 +250,7 @@ static void rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
> flags |= RTL818X_TX_DESC_FLAG_NO_ENC;
>
> flags |= ieee80211_get_tx_rate(dev, info)->hw_value<< 24;
> - if (ieee80211_has_morefrags(((struct ieee80211_hdr *)skb->data)->frame_control))
> + if (ieee80211_has_morefrags(tx_hdr->frame_control))
> flags |= RTL818X_TX_DESC_FLAG_MOREFRAG;
> if (info->control.rates[0].flags& IEEE80211_TX_RC_USE_RTS_CTS) {
> flags |= RTL818X_TX_DESC_FLAG_RTS;
> @@ -261,6 +262,13 @@ static void rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
> flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value<< 19;
> }
>
> + if (info->flags& IEEE80211_TX_CTL_ASSIGN_SEQ) {
> + if (info->flags& IEEE80211_TX_CTL_FIRST_FRAGMENT)
> + priv->seqno += 0x10;
> + tx_hdr->seq_ctrl&= cpu_to_le16(IEEE80211_SCTL_FRAG);
> + tx_hdr->seq_ctrl |= cpu_to_le16(priv->seqno);
> + }
> +
> if (!priv->is_rtl8187b) {
> struct rtl8187_tx_hdr *hdr =
> (struct rtl8187_tx_hdr *)skb_push(skb, sizeof(*hdr));
> @@ -274,8 +282,6 @@ static void rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
> } else {
> /* fc needs to be calculated before skb_push() */
> unsigned int epmap[4] = { 6, 7, 5, 4 };
> - struct ieee80211_hdr *tx_hdr =
> - (struct ieee80211_hdr *)(skb->data);
> u16 fc = le16_to_cpu(tx_hdr->frame_control);
>
> struct rtl8187b_tx_hdr *hdr =
> @@ -1031,10 +1037,61 @@ static void rtl8187_stop(struct ieee80211_hw *dev)
> cancel_delayed_work_sync(&priv->work);
> }
>
> +static u64 rtl8187_get_tsf(struct ieee80211_hw *dev, struct ieee80211_vif *vif)
> +{
> + struct rtl8187_priv *priv = dev->priv;
> +
> + return rtl818x_ioread32(priv,&priv->map->TSFT[0]) |
> + (u64)(rtl818x_ioread32(priv,&priv->map->TSFT[1]))<< 32;
> +}
> +
> +
> +static void rtl8187_beacon_work(struct work_struct *work)
> +{
> + struct rtl8187_vif *vif_priv =
> + container_of(work, struct rtl8187_vif, beacon_work.work);
> + struct ieee80211_vif *vif =
> + container_of((void *)vif_priv, struct ieee80211_vif, drv_priv);
> + struct ieee80211_hw *dev = vif_priv->dev;
> + struct ieee80211_mgmt *mgmt;
> + struct sk_buff *skb;
> +
> + /* don't overflow the tx ring */
> + if (ieee80211_queue_stopped(dev, 0))
> + goto resched;
> +
> + /* grab a fresh beacon */
> + skb = ieee80211_beacon_get(dev, vif);
> + if (!skb)
> + goto resched;
> +
> + /*
> + * update beacon timestamp w/ TSF value
> + * TODO: make hardware update beacon timestamp
> + */
> + mgmt = (struct ieee80211_mgmt *)skb->data;
> + mgmt->u.beacon.timestamp = cpu_to_le64(rtl8187_get_tsf(dev, vif));
> +
> + /* TODO: use actual beacon queue */
> + skb_set_queue_mapping(skb, 0);
> +
> + rtl8187_tx(dev, skb);
> +
> +resched:
> + /*
> + * schedule next beacon
> + * TODO: use hardware support for beacon timing
> + */
> + schedule_delayed_work(&vif_priv->beacon_work,
> + usecs_to_jiffies(1024 * vif->bss_conf.beacon_int));
> +}
> +
> +
> static int rtl8187_add_interface(struct ieee80211_hw *dev,
> struct ieee80211_vif *vif)
> {
> struct rtl8187_priv *priv = dev->priv;
> + struct rtl8187_vif *vif_priv;
> int i;
> int ret = -EOPNOTSUPP;
>
> @@ -1044,6 +1101,7 @@ static int rtl8187_add_interface(struct ieee80211_hw *dev,
>
> switch (vif->type) {
> case NL80211_IFTYPE_STATION:
> + case NL80211_IFTYPE_ADHOC:
> break;
> default:
> goto exit;
> @@ -1052,6 +1110,13 @@ static int rtl8187_add_interface(struct ieee80211_hw *dev,
> ret = 0;
> priv->vif = vif;
>
> + /* Initialize driver private area */
> + vif_priv = (struct rtl8187_vif *)&vif->drv_priv;
> + vif_priv->dev = dev;
> + INIT_DELAYED_WORK(&vif_priv->beacon_work, rtl8187_beacon_work);
> + vif_priv->enable_beacon = false;
> +
> +
> rtl818x_iowrite8(priv,&priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
> for (i = 0; i< ETH_ALEN; i++)
> rtl818x_iowrite8(priv,&priv->map->MAC[i],
> @@ -1175,9 +1240,12 @@ static void rtl8187_bss_info_changed(struct ieee80211_hw *dev,
> u32 changed)
> {
> struct rtl8187_priv *priv = dev->priv;
> + struct rtl8187_vif *vif_priv;
> int i;
> u8 reg;
>
> + vif_priv = (struct rtl8187_vif *)&vif->drv_priv;
> +
> if (changed& BSS_CHANGED_BSSID) {
> mutex_lock(&priv->conf_mutex);
> for (i = 0; i< ETH_ALEN; i++)
> @@ -1189,8 +1257,12 @@ static void rtl8187_bss_info_changed(struct ieee80211_hw *dev,
> else
> reg = 0;
>
> - if (is_valid_ether_addr(info->bssid))
> - reg |= RTL818X_MSR_INFRA;
> + if (is_valid_ether_addr(info->bssid)) {
> + if (vif->type == NL80211_IFTYPE_ADHOC)
> + reg |= RTL818X_MSR_ADHOC;
> + else
> + reg |= RTL818X_MSR_INFRA;
> + }
> else
> reg |= RTL818X_MSR_NO_LINK;
>
> @@ -1202,6 +1274,16 @@ static void rtl8187_bss_info_changed(struct ieee80211_hw *dev,
> if (changed& (BSS_CHANGED_ERP_SLOT | BSS_CHANGED_ERP_PREAMBLE))
> rtl8187_conf_erp(priv, info->use_short_slot,
> info->use_short_preamble);
> +
> + if (changed& BSS_CHANGED_BEACON_ENABLED)
> + vif_priv->enable_beacon = info->enable_beacon;
> +
> + if (changed& (BSS_CHANGED_BEACON_ENABLED | BSS_CHANGED_BEACON)) {
> + cancel_delayed_work_sync(&vif_priv->beacon_work);
> + if (vif_priv->enable_beacon)
> + schedule_work(&vif_priv->beacon_work.work);
> + }
> +
> }
>
> static u64 rtl8187_prepare_multicast(struct ieee80211_hw *dev,
> @@ -1279,13 +1361,6 @@ static int rtl8187_conf_tx(struct ieee80211_hw *dev,
> return 0;
> }
>
> -static u64 rtl8187_get_tsf(struct ieee80211_hw *dev, struct ieee80211_vif *vif)
> -{
> - struct rtl8187_priv *priv = dev->priv;
> -
> - return rtl818x_ioread32(priv,&priv->map->TSFT[0]) |
> - (u64)(rtl818x_ioread32(priv,&priv->map->TSFT[1]))<< 32;
> -}
>
> static const struct ieee80211_ops rtl8187_ops = {
> .tx = rtl8187_tx,
> @@ -1514,12 +1589,9 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
> if (reg& 0xFF00)
> priv->rfkill_mask = RFKILL_MASK_8198;
> }
> -
> - /*
> - * XXX: Once this driver supports anything that requires
> - * beacons it must implement IEEE80211_TX_CTL_ASSIGN_SEQ.
> - */
> - dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
> + dev->vif_data_size = sizeof(struct rtl8187_vif);
> + dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
> + BIT(NL80211_IFTYPE_ADHOC) ;
>
> if ((id->driver_info == DEVICE_RTL8187)&& priv->is_rtl8187b)
> printk(KERN_INFO "rtl8187: inconsistency between id with OEM"
> diff --git a/drivers/net/wireless/rtl818x/rtl8187/rtl8187.h b/drivers/net/wireless/rtl818x/rtl8187/rtl8187.h
> index f1cc907..e19a20a 100644
> --- a/drivers/net/wireless/rtl818x/rtl8187/rtl8187.h
> +++ b/drivers/net/wireless/rtl818x/rtl8187/rtl8187.h
> @@ -89,6 +89,14 @@ enum {
> DEVICE_RTL8187B
> };
>
> +struct rtl8187_vif {
> + struct ieee80211_hw *dev;
> +
> + /* beaconing */
> + struct delayed_work beacon_work;
> + bool enable_beacon;
> +};
> +
> struct rtl8187_priv {
> /* common between rtl818x drivers */
> struct rtl818x_csr *map;
> @@ -141,6 +149,7 @@ struct rtl8187_priv {
> __le32 bits32;
> } *io_dmabuf;
> bool rfkill_off;
> + u16 seqno;
> };
>
> void rtl8187_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data);
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2012-03-05 23:59 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-02-23 18:50 [PATCH] Add AD-HOC support to the rtl8187 based on the rtl8180 source Attila Fazekas
2012-02-23 23:49 ` Larry Finger
2012-03-05 23:59 ` Larry Finger
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).