From: Dmitry Tarnyagin <dmitry.tarnyagin@stericsson.com>
To: linux-wireless@vger.kernel.org
Subject: [PATCH 21/21] cw1200: Kconfig + Makefile for the driver.
Date: Fri, 2 Mar 2012 02:41:35 +0100 [thread overview]
Message-ID: <1330652495-25837-22-git-send-email-dmitry.tarnyagin@stericsson.com> (raw)
In-Reply-To: <1330652495-25837-1-git-send-email-dmitry.tarnyagin@stericsson.com>
The patch contains build system files for the cw1200 driver.
Signed-off-by: Dmitry Tarnyagin <dmitry.tarnyagin@stericsson.com>
---
drivers/staging/Kconfig | 2 +
drivers/staging/Makefile | 1 +
drivers/staging/cw1200/Kconfig | 143 +++++++++++++++++++++++++++++++++++++++
drivers/staging/cw1200/Makefile | 19 +++++
4 files changed, 165 insertions(+), 0 deletions(-)
create mode 100644 drivers/staging/cw1200/Kconfig
create mode 100644 drivers/staging/cw1200/Makefile
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index f1abfb1..7134785 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -134,4 +134,6 @@ source "drivers/staging/ramster/Kconfig"
source "drivers/staging/ozwpan/Kconfig"
+source "drivers/staging/cw1200/Kconfig"
+
endif # STAGING
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index ffe7d44..09a9f22 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -57,3 +57,4 @@ obj-$(CONFIG_ANDROID) += android/
obj-$(CONFIG_PHONE) += telephony/
obj-$(CONFIG_RAMSTER) += ramster/
obj-$(CONFIG_USB_WPAN_HCD) += ozwpan/
+obj-$(CONFIG_CW1200) += cw1200/
diff --git a/drivers/staging/cw1200/Kconfig b/drivers/staging/cw1200/Kconfig
new file mode 100644
index 0000000..1afd9b0
--- /dev/null
+++ b/drivers/staging/cw1200/Kconfig
@@ -0,0 +1,143 @@
+config CW1200
+ tristate "CW1200 WLAN support"
+ select MAC80211
+ select CFG80211
+ help
+
+ This is an experimental driver for the cw1200 chip-set.
+ Enabling this option enables the generic driver without
+ any platform support.
+
+ Please select the appropriate platform below.
+
+if CW1200
+
+config CW1200_STANDALONE
+ bool "Build a standalone cw1200 driver"
+ depends on CW1200
+ help
+ Say Y here if you would like to build a standalone cw1200 driver,
+ not associated with any platform. Likely you wil not be able to use
+ it for any purposes.
+ If unsure, say N.
+
+config CW1200_NON_POWER_OF_TWO_BLOCKSIZES
+ bool "Platform supports non-power-of-two SDIO transfer"
+ depends on CW1200
+ help
+ Say N here only if you are running the driver on a platform
+ which does not have support for non-power-of-two SDIO transfer.
+ If unsure, say Y.
+
+config CW1200_USE_GPIO_IRQ
+ bool "Use GPIO interrupt"
+ depends on CW1200 && !CW1200_STANDALONE
+ help
+ Say Y here if you want to include GPIO IRQ support instead of SDIO IRQ.
+ If unsure, say N.
+
+config CW1200_5GHZ_SUPPORT
+ bool "5GHz band support"
+ depends on CW1200
+ help
+ Say Y if your device supports 5GHz band. Should be disabled for
+ CW1100 silicon.
+ If unsure, say N.
+
+config CW1200_USE_STE_EXTENSIONS
+ bool "STE extensions"
+ depends on CW1200
+ help
+ Say Y if you want to include experimental code or code with
+ not resolved dependency.
+ If unsure, say N.
+
+config CW1200_WAPI_SUPPORT
+ bool "WAPI support"
+ depends on CW1200_USE_STE_EXTENSIONS
+ help
+ Say Y if your compat-wireless support WAPI.
+ If unsure, say N.
+
+config CW1200_DISABLE_BEACON_HINTS
+ bool "Disable 11d beacon hints"
+ depends on CW1200
+ help
+ Say Y if you want to disable 11d beacon hints.
+ If unsure, say N.
+
+config CW1200_U5500_SUPPORT
+ bool "Enable U5500 support"
+ depends on CW1200 && !CW1200_STANDALONE
+ help
+ Say Y if you want to enable wlan on u5500 platform support.
+ If unsure, say N.
+
+menu "Driver debug features"
+ depends on CW1200
+
+config CW1200_DEBUGFS
+ bool "Expose driver internals to DebugFS (DEVELOPMENT)"
+ help
+ Say Y if you want to expose driver internals to DebugFS.
+ If unsure, say N.
+
+config CW1200_BH_DEBUG
+ bool "Enable low-level device communication logs (DEVELOPMENT)"
+ help
+ Say Y if you want to enable BH logs.
+ If unsure, say N.
+
+config CW1200_WSM_DEBUG
+ bool "Enable WSM API debug messages (DEVELOPMENT)"
+ help
+ Say Y if you want to enable WSM logs.
+ If unsure, say N.
+
+config CW1200_WSM_DUMPS
+ bool "Verbose WSM API logging (DEVELOPMENT)"
+ help
+ Say Y if you want to enable WSM dumps.
+ If unsure, say N.
+
+config CW1200_WSM_DUMPS_SHORT
+ depends on CW1200_WSM_DUMPS
+ bool "Dump only first x bytes (default 20) (DEVELOPMENT)"
+ help
+ Say Y if you want to limit amount of data printed in WSM dumps.
+ If unsure, say N.
+
+config CW1200_TXRX_DEBUG
+ bool "Enable TX/RX debug messages (DEVELOPMENT)"
+ help
+ Say Y if you want to enable TX logs.
+ If unsure, say N.
+
+config CW1200_TX_POLICY_DEBUG
+ bool "Enable TX policy debug (DEVELOPMENT)"
+ help
+ Say Y if you want to enable TX policy logs.
+ If unsure, say N.
+
+config CW1200_STA_DEBUG
+ bool "Enable STA/AP debug (DEVELOPMENT)"
+ help
+ Say Y if you want to enable STA logs.
+ If unsure, say N.
+
+config CW1200_DUMP_ON_ERROR
+ bool "Dump kernel in case of critical error (DEVELOPMENT)"
+ help
+ Say Y only if you know for sure what are you doing.
+ If unsure, say N.
+
+endmenu
+
+config CW1200_ITP
+ bool "Enable ITP DebugFS"
+ depends on CW1200_DEBUGFS
+ help
+ Say Y if you want to include ITP code.
+ If unsure, say N.
+
+endif
diff --git a/drivers/staging/cw1200/Makefile b/drivers/staging/cw1200/Makefile
new file mode 100644
index 0000000..01a3290
--- /dev/null
+++ b/drivers/staging/cw1200/Makefile
@@ -0,0 +1,19 @@
+cw1200_core-y := \
+ fwio.o \
+ txrx.o \
+ main.o \
+ queue.o \
+ hwio.o \
+ bh.o \
+ wsm.o \
+ sta.o \
+ ap.o \
+ scan.o
+cw1200_core-$(CONFIG_CW1200_DEBUGFS) += debug.o
+cw1200_core-$(CONFIG_CW1200_ITP) += itp.o
+cw1200_core-$(CONFIG_PM) += pm.o
+
+cw1200_wlan-y := cw1200_sdio.o
+
+obj-$(CONFIG_CW1200) += cw1200_core.o
+obj-$(CONFIG_CW1200) += cw1200_wlan.o
--
1.7.9
next prev parent reply other threads:[~2012-03-02 1:41 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <d53e019b1a0bcd29c2c367fbe5665413f2d33938-submit>
2012-03-02 1:41 ` [PATCH 00/21] cw1200: mac80211-based driver for ST-Ericsson CW1200 device Dmitry Tarnyagin
2012-03-02 1:41 ` [PATCH 01/21] cw1200: cw1200.h, private driver data Dmitry Tarnyagin
2012-03-02 1:41 ` [PATCH 02/21] cw1200: cw1200_plat.h, definition of the driver'ss platform data Dmitry Tarnyagin
2012-03-02 1:41 ` [PATCH 03/21] cw1200: sbus.h, common device interface abstraction Dmitry Tarnyagin
2012-03-02 1:41 ` [PATCH 04/21] cw1200: cw1200_sdio.c, implementation of SDIO wrapper for the driver Dmitry Tarnyagin
2012-03-02 1:41 ` [PATCH 05/21] cw1200: hwio.*, device reg/mem map and low-level i/o primitives Dmitry Tarnyagin
2012-03-02 1:41 ` [PATCH 06/21] cw1200: fwio.*, firmware downloading code for the cw1200 driver Dmitry Tarnyagin
2012-03-02 1:41 ` [PATCH 07/21] cw1200: queue.*, implementation of TX queues of " Dmitry Tarnyagin
2012-03-02 8:33 ` Johannes Berg
2012-03-02 15:32 ` Dmitry Tarnyagin
2012-03-02 1:41 ` [PATCH 08/21] cw1200: wsm.*, implementation of device high-level interface Dmitry Tarnyagin
2012-03-02 8:34 ` Johannes Berg
2012-03-02 8:41 ` Joe Perches
2012-03-02 1:41 ` [PATCH 09/21] cw1200: txrx.*, implementation of datapath Dmitry Tarnyagin
2012-05-07 12:53 ` Bob Copeland
2012-05-08 7:09 ` Dmitry Tarnyagin
2012-05-08 12:54 ` Bob Copeland
2012-03-02 1:41 ` [PATCH 10/21] cw1200: ht.h, small helper header with HT definitions Dmitry Tarnyagin
2012-03-02 1:41 ` [PATCH 11/21] cw1200: bh.*, device serving thread Dmitry Tarnyagin
2012-03-02 1:41 ` [PATCH 12/21] cw1200: sta.*, mac80211 STA callbacks Dmitry Tarnyagin
2012-03-02 1:41 ` [PATCH 13/21] cw1200: ap.*, mac80211 AP callbacks Dmitry Tarnyagin
2012-03-02 1:41 ` [PATCH 14/21] cw1200: scan.*, mac80211 hw_scan callback Dmitry Tarnyagin
2012-03-02 1:41 ` [PATCH 15/21] cw1200: debug.*, implementation of the driver's debugfs Dmitry Tarnyagin
2012-03-02 1:41 ` [PATCH 16/21] cw1200: itp.*, internal device test and calibration code Dmitry Tarnyagin
2012-03-02 1:41 ` [PATCH 17/21] cw1200: pm.*, power management code Dmitry Tarnyagin
2012-03-02 1:41 ` [PATCH 18/21] cw1200: main.c, core initialization code Dmitry Tarnyagin
2012-03-02 1:41 ` [PATCH 19/21] cw1200: TODO list Dmitry Tarnyagin
2012-03-02 8:51 ` Johannes Berg
2012-03-02 1:41 ` [PATCH 20/21] cw1200: Credits Dmitry Tarnyagin
2012-03-02 1:41 ` Dmitry Tarnyagin [this message]
2012-03-02 8:50 ` [PATCH 21/21] cw1200: Kconfig + Makefile for the driver Johannes Berg
2012-03-02 15:45 ` Dmitry Tarnyagin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1330652495-25837-22-git-send-email-dmitry.tarnyagin@stericsson.com \
--to=dmitry.tarnyagin@stericsson.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).