From: Johannes Berg <johannes@sipsolutions.net>
To: John Linville <linville@tuxdriver.com>
Cc: linux-wireless <linux-wireless@vger.kernel.org>,
Ben Greear <greearb@candelatech.com>
Subject: [PATCH 3.4] nl80211: ensure interface is up in various APIs
Date: Mon, 02 Apr 2012 10:51:55 +0200 [thread overview]
Message-ID: <1333356715.3498.0.camel@jlt3.sipsolutions.net> (raw)
From: Johannes Berg <johannes.berg@intel.com>
The nl80211 handling code should ensure as much as
it can that the interface is in a valid state, it
can certainly ensure the interface is running.
Not doing so can cause calls through mac80211 into
the driver that result in warnings and unspecified
behaviour in the driver.
Cc: stable@vger.kernel.org
Reported-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
net/wireless/nl80211.c | 31 ++++++++++++++++++-------------
1 file changed, 18 insertions(+), 13 deletions(-)
--- a/net/wireless/nl80211.c 2012-03-30 16:58:41.000000000 +0200
+++ b/net/wireless/nl80211.c 2012-04-02 10:48:26.000000000 +0200
@@ -1294,6 +1294,11 @@ static int nl80211_set_wiphy(struct sk_b
goto bad_res;
}
+ if (!netif_running(netdev)) {
+ result = -ENETDOWN;
+ goto bad_res;
+ }
+
nla_for_each_nested(nl_txq_params,
info->attrs[NL80211_ATTR_WIPHY_TXQ_PARAMS],
rem_txq_params) {
@@ -6384,7 +6389,7 @@ static struct genl_ops nl80211_ops[] = {
.doit = nl80211_get_key,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
- .internal_flags = NL80211_FLAG_NEED_NETDEV |
+ .internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
@@ -6416,7 +6421,7 @@ static struct genl_ops nl80211_ops[] = {
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
.doit = nl80211_set_beacon,
- .internal_flags = NL80211_FLAG_NEED_NETDEV |
+ .internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
@@ -6424,7 +6429,7 @@ static struct genl_ops nl80211_ops[] = {
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
.doit = nl80211_start_ap,
- .internal_flags = NL80211_FLAG_NEED_NETDEV |
+ .internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
@@ -6432,7 +6437,7 @@ static struct genl_ops nl80211_ops[] = {
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
.doit = nl80211_stop_ap,
- .internal_flags = NL80211_FLAG_NEED_NETDEV |
+ .internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
@@ -6448,7 +6453,7 @@ static struct genl_ops nl80211_ops[] = {
.doit = nl80211_set_station,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
- .internal_flags = NL80211_FLAG_NEED_NETDEV |
+ .internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
@@ -6464,7 +6469,7 @@ static struct genl_ops nl80211_ops[] = {
.doit = nl80211_del_station,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
- .internal_flags = NL80211_FLAG_NEED_NETDEV |
+ .internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
@@ -6497,7 +6502,7 @@ static struct genl_ops nl80211_ops[] = {
.doit = nl80211_del_mpath,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
- .internal_flags = NL80211_FLAG_NEED_NETDEV |
+ .internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
@@ -6505,7 +6510,7 @@ static struct genl_ops nl80211_ops[] = {
.doit = nl80211_set_bss,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
- .internal_flags = NL80211_FLAG_NEED_NETDEV |
+ .internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
@@ -6531,7 +6536,7 @@ static struct genl_ops nl80211_ops[] = {
.doit = nl80211_get_mesh_config,
.policy = nl80211_policy,
/* can be retrieved by unprivileged users */
- .internal_flags = NL80211_FLAG_NEED_NETDEV |
+ .internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
@@ -6664,7 +6669,7 @@ static struct genl_ops nl80211_ops[] = {
.doit = nl80211_setdel_pmksa,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
- .internal_flags = NL80211_FLAG_NEED_NETDEV |
+ .internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
@@ -6672,7 +6677,7 @@ static struct genl_ops nl80211_ops[] = {
.doit = nl80211_setdel_pmksa,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
- .internal_flags = NL80211_FLAG_NEED_NETDEV |
+ .internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
@@ -6680,7 +6685,7 @@ static struct genl_ops nl80211_ops[] = {
.doit = nl80211_flush_pmksa,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
- .internal_flags = NL80211_FLAG_NEED_NETDEV |
+ .internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
@@ -6840,7 +6845,7 @@ static struct genl_ops nl80211_ops[] = {
.doit = nl80211_probe_client,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
- .internal_flags = NL80211_FLAG_NEED_NETDEV |
+ .internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
reply other threads:[~2012-04-02 8:52 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1333356715.3498.0.camel@jlt3.sipsolutions.net \
--to=johannes@sipsolutions.net \
--cc=greearb@candelatech.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).