* ath9k coalescence parameters
@ 2012-04-05 13:40 Guido Gavilanes
0 siblings, 0 replies; only message in thread
From: Guido Gavilanes @ 2012-04-05 13:40 UTC (permalink / raw)
To: linux-wireless
Hello guys,
I have seen that for ethtool, it is possible to change rx-usecs or
rx-frames of the NIC to control the interrupt frequency.
I intend to minimize the idle times between the packet rx and packet
processing by the cpu, so I am trying 2 alternatives:
1) Find a way to set up the interrupt frequency by setting the number of
packets (or time passed) before the netcard generates the interrupt; is
this possible?
2) Disabling power saving (since I see it has consequences on interrupt
handling), but it seems it is not supported in AP mode. Is there a way
to achieve this?
I have been googling for the topic without success...
Thank you!!
Guido
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2012-04-05 13:40 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-04-05 13:40 ath9k coalescence parameters Guido Gavilanes
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).