* [PATCH] libertas CS: convert to asynchronous firmware loading
@ 2012-04-18 19:09 Daniel Drake
2012-04-19 15:23 ` Dan Williams
0 siblings, 1 reply; 2+ messages in thread
From: Daniel Drake @ 2012-04-18 19:09 UTC (permalink / raw)
To: linville; +Cc: linux-wireless, dcbw, libertas-dev
Signed-off-by: Daniel Drake <dsd@laptop.org>
Tested-by: Dan Williams <dcbw@redhat.com>
---
drivers/net/wireless/libertas/if_cs.c | 92 ++++++++++++++++++---------------
1 files changed, 51 insertions(+), 41 deletions(-)
diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c
index bb3deb3..c211b86 100644
--- a/drivers/net/wireless/libertas/if_cs.c
+++ b/drivers/net/wireless/libertas/if_cs.c
@@ -738,6 +738,52 @@ done:
return ret;
}
+static void if_cs_prog_firmware(struct lbs_private *priv, int ret,
+ const struct firmware *helper,
+ const struct firmware *mainfw)
+{
+ struct if_cs_card *card = priv->card;
+
+ if (ret) {
+ pr_err("failed to find firmware (%d)\n", ret);
+ return;
+ }
+
+ /* Load the firmware */
+ ret = if_cs_prog_helper(card, helper);
+ if (ret == 0 && (card->model != MODEL_8305))
+ ret = if_cs_prog_real(card, mainfw);
+ if (ret)
+ goto out;
+
+ /* Now actually get the IRQ */
+ ret = request_irq(card->p_dev->irq, if_cs_interrupt,
+ IRQF_SHARED, DRV_NAME, card);
+ if (ret) {
+ pr_err("error in request_irq\n");
+ goto out;
+ }
+
+ /*
+ * Clear any interrupt cause that happened while sending
+ * firmware/initializing card
+ */
+ if_cs_write16(card, IF_CS_CARD_INT_CAUSE, IF_CS_BIT_MASK);
+ if_cs_enable_ints(card);
+
+ /* And finally bring the card up */
+ priv->fw_ready = 1;
+ if (lbs_start_card(priv) != 0) {
+ pr_err("could not activate card\n");
+ free_irq(card->p_dev->irq, card);
+ }
+
+out:
+ if (helper)
+ release_firmware(helper);
+ if (mainfw)
+ release_firmware(mainfw);
+}
/********************************************************************/
@@ -809,8 +855,6 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
unsigned int prod_id;
struct lbs_private *priv;
struct if_cs_card *card;
- const struct firmware *helper = NULL;
- const struct firmware *mainfw = NULL;
lbs_deb_enter(LBS_DEB_CS);
@@ -890,20 +934,6 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
goto out2;
}
- ret = lbs_get_firmware(&p_dev->dev, card->model, &fw_table[0],
- &helper, &mainfw);
- if (ret) {
- pr_err("failed to find firmware (%d)\n", ret);
- goto out2;
- }
-
- /* Load the firmware early, before calling into libertas.ko */
- ret = if_cs_prog_helper(card, helper);
- if (ret == 0 && (card->model != MODEL_8305))
- ret = if_cs_prog_real(card, mainfw);
- if (ret)
- goto out2;
-
/* Make this card known to the libertas driver */
priv = lbs_add_card(card, &p_dev->dev);
if (!priv) {
@@ -911,37 +941,22 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
goto out2;
}
- /* Finish setting up fields in lbs_private */
+ /* Set up fields in lbs_private */
card->priv = priv;
priv->card = card;
priv->hw_host_to_card = if_cs_host_to_card;
priv->enter_deep_sleep = NULL;
priv->exit_deep_sleep = NULL;
priv->reset_deep_sleep_wakeup = NULL;
- priv->fw_ready = 1;
- /* Now actually get the IRQ */
- ret = request_irq(p_dev->irq, if_cs_interrupt,
- IRQF_SHARED, DRV_NAME, card);
+ /* Get firmware */
+ ret = lbs_get_firmware_async(priv, &p_dev->dev, card->model, fw_table,
+ if_cs_prog_firmware);
if (ret) {
- pr_err("error in request_irq\n");
- goto out3;
- }
-
- /*
- * Clear any interrupt cause that happened while sending
- * firmware/initializing card
- */
- if_cs_write16(card, IF_CS_CARD_INT_CAUSE, IF_CS_BIT_MASK);
- if_cs_enable_ints(card);
-
- /* And finally bring the card up */
- if (lbs_start_card(priv) != 0) {
- pr_err("could not activate card\n");
+ pr_err("failed to find firmware (%d)\n", ret);
goto out3;
}
- ret = 0;
goto out;
out3:
@@ -951,11 +966,6 @@ out2:
out1:
pcmcia_disable_device(p_dev);
out:
- if (helper)
- release_firmware(helper);
- if (mainfw)
- release_firmware(mainfw);
-
lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret);
return ret;
}
--
1.7.7.6
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] libertas CS: convert to asynchronous firmware loading
2012-04-18 19:09 [PATCH] libertas CS: convert to asynchronous firmware loading Daniel Drake
@ 2012-04-19 15:23 ` Dan Williams
0 siblings, 0 replies; 2+ messages in thread
From: Dan Williams @ 2012-04-19 15:23 UTC (permalink / raw)
To: Daniel Drake; +Cc: linville, linux-wireless, libertas-dev
On Wed, 2012-04-18 at 20:09 +0100, Daniel Drake wrote:
> Signed-off-by: Daniel Drake <dsd@laptop.org>
> Tested-by: Dan Williams <dcbw@redhat.com>
Acked-by: Dan Williams <dcbw@redhat.com>
> ---
> drivers/net/wireless/libertas/if_cs.c | 92 ++++++++++++++++++---------------
> 1 files changed, 51 insertions(+), 41 deletions(-)
>
> diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c
> index bb3deb3..c211b86 100644
> --- a/drivers/net/wireless/libertas/if_cs.c
> +++ b/drivers/net/wireless/libertas/if_cs.c
> @@ -738,6 +738,52 @@ done:
> return ret;
> }
>
> +static void if_cs_prog_firmware(struct lbs_private *priv, int ret,
> + const struct firmware *helper,
> + const struct firmware *mainfw)
> +{
> + struct if_cs_card *card = priv->card;
> +
> + if (ret) {
> + pr_err("failed to find firmware (%d)\n", ret);
> + return;
> + }
> +
> + /* Load the firmware */
> + ret = if_cs_prog_helper(card, helper);
> + if (ret == 0 && (card->model != MODEL_8305))
> + ret = if_cs_prog_real(card, mainfw);
> + if (ret)
> + goto out;
> +
> + /* Now actually get the IRQ */
> + ret = request_irq(card->p_dev->irq, if_cs_interrupt,
> + IRQF_SHARED, DRV_NAME, card);
> + if (ret) {
> + pr_err("error in request_irq\n");
> + goto out;
> + }
> +
> + /*
> + * Clear any interrupt cause that happened while sending
> + * firmware/initializing card
> + */
> + if_cs_write16(card, IF_CS_CARD_INT_CAUSE, IF_CS_BIT_MASK);
> + if_cs_enable_ints(card);
> +
> + /* And finally bring the card up */
> + priv->fw_ready = 1;
> + if (lbs_start_card(priv) != 0) {
> + pr_err("could not activate card\n");
> + free_irq(card->p_dev->irq, card);
> + }
> +
> +out:
> + if (helper)
> + release_firmware(helper);
> + if (mainfw)
> + release_firmware(mainfw);
> +}
>
>
> /********************************************************************/
> @@ -809,8 +855,6 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
> unsigned int prod_id;
> struct lbs_private *priv;
> struct if_cs_card *card;
> - const struct firmware *helper = NULL;
> - const struct firmware *mainfw = NULL;
>
> lbs_deb_enter(LBS_DEB_CS);
>
> @@ -890,20 +934,6 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
> goto out2;
> }
>
> - ret = lbs_get_firmware(&p_dev->dev, card->model, &fw_table[0],
> - &helper, &mainfw);
> - if (ret) {
> - pr_err("failed to find firmware (%d)\n", ret);
> - goto out2;
> - }
> -
> - /* Load the firmware early, before calling into libertas.ko */
> - ret = if_cs_prog_helper(card, helper);
> - if (ret == 0 && (card->model != MODEL_8305))
> - ret = if_cs_prog_real(card, mainfw);
> - if (ret)
> - goto out2;
> -
> /* Make this card known to the libertas driver */
> priv = lbs_add_card(card, &p_dev->dev);
> if (!priv) {
> @@ -911,37 +941,22 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
> goto out2;
> }
>
> - /* Finish setting up fields in lbs_private */
> + /* Set up fields in lbs_private */
> card->priv = priv;
> priv->card = card;
> priv->hw_host_to_card = if_cs_host_to_card;
> priv->enter_deep_sleep = NULL;
> priv->exit_deep_sleep = NULL;
> priv->reset_deep_sleep_wakeup = NULL;
> - priv->fw_ready = 1;
>
> - /* Now actually get the IRQ */
> - ret = request_irq(p_dev->irq, if_cs_interrupt,
> - IRQF_SHARED, DRV_NAME, card);
> + /* Get firmware */
> + ret = lbs_get_firmware_async(priv, &p_dev->dev, card->model, fw_table,
> + if_cs_prog_firmware);
> if (ret) {
> - pr_err("error in request_irq\n");
> - goto out3;
> - }
> -
> - /*
> - * Clear any interrupt cause that happened while sending
> - * firmware/initializing card
> - */
> - if_cs_write16(card, IF_CS_CARD_INT_CAUSE, IF_CS_BIT_MASK);
> - if_cs_enable_ints(card);
> -
> - /* And finally bring the card up */
> - if (lbs_start_card(priv) != 0) {
> - pr_err("could not activate card\n");
> + pr_err("failed to find firmware (%d)\n", ret);
> goto out3;
> }
>
> - ret = 0;
> goto out;
>
> out3:
> @@ -951,11 +966,6 @@ out2:
> out1:
> pcmcia_disable_device(p_dev);
> out:
> - if (helper)
> - release_firmware(helper);
> - if (mainfw)
> - release_firmware(mainfw);
> -
> lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret);
> return ret;
> }
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2012-04-19 15:23 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-04-18 19:09 [PATCH] libertas CS: convert to asynchronous firmware loading Daniel Drake
2012-04-19 15:23 ` Dan Williams
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).