From: Bing Zhao <bzhao@marvell.com>
To: linux-wireless@vger.kernel.org
Cc: "John W. Linville" <linville@tuxdriver.com>,
Avinash Patil <patila@marvell.com>,
Yogesh Powar <yogeshp@marvell.com>,
Kiran Divekar <dkiran@marvell.com>,
Amitkumar Karwar <akarwar@marvell.com>,
Stone Piao <piaoyun@marvell.com>,
Frank Huang <frankh@marvell.com>, Bing Zhao <bzhao@marvell.com>,
harvey yang <harvey.huawei.yang@gmail.com>
Subject: [PATCH 07/18] mwifiex: add bss start and bss stop commands for AP
Date: Thu, 3 May 2012 00:22:29 -0700 [thread overview]
Message-ID: <1336029760-22565-8-git-send-email-bzhao@marvell.com> (raw)
In-Reply-To: <1336029760-22565-1-git-send-email-bzhao@marvell.com>
From: Avinash Patil <patila@marvell.com>
1. separate file for preparing uAP command buffer
2. definition of bss_start and bss_stop commands being sent to
firmware
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: Kiran Divekar <dkiran@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
---
drivers/net/wireless/mwifiex/Makefile | 1 +
drivers/net/wireless/mwifiex/cmdevt.c | 16 ++++++++-
drivers/net/wireless/mwifiex/fw.h | 3 ++
drivers/net/wireless/mwifiex/main.h | 3 ++
drivers/net/wireless/mwifiex/sta_cmdresp.c | 8 +++++
drivers/net/wireless/mwifiex/uap_cmd.c | 46 ++++++++++++++++++++++++++++
6 files changed, 75 insertions(+), 2 deletions(-)
create mode 100644 drivers/net/wireless/mwifiex/uap_cmd.c
diff --git a/drivers/net/wireless/mwifiex/Makefile b/drivers/net/wireless/mwifiex/Makefile
index 5c1a46b..3ec71ae 100644
--- a/drivers/net/wireless/mwifiex/Makefile
+++ b/drivers/net/wireless/mwifiex/Makefile
@@ -29,6 +29,7 @@ mwifiex-y += scan.o
mwifiex-y += join.o
mwifiex-y += sta_ioctl.o
mwifiex-y += sta_cmd.o
+mwifiex-y += uap_cmd.o
mwifiex-y += sta_cmdresp.o
mwifiex-y += sta_event.o
mwifiex-y += sta_tx.o
diff --git a/drivers/net/wireless/mwifiex/cmdevt.c b/drivers/net/wireless/mwifiex/cmdevt.c
index d9f30c5..51e023e 100644
--- a/drivers/net/wireless/mwifiex/cmdevt.c
+++ b/drivers/net/wireless/mwifiex/cmdevt.c
@@ -545,8 +545,20 @@ int mwifiex_send_cmd_async(struct mwifiex_private *priv, uint16_t cmd_no,
/* Prepare command */
if (cmd_no) {
- ret = mwifiex_sta_prepare_cmd(priv, cmd_no, cmd_action,
- cmd_oid, data_buf, cmd_ptr);
+ switch (cmd_no) {
+ case HostCmd_CMD_UAP_SYS_CONFIG:
+ case HostCmd_CMD_UAP_BSS_START:
+ case HostCmd_CMD_UAP_BSS_STOP:
+ ret = mwifiex_uap_prepare_cmd(priv, cmd_no, cmd_action,
+ cmd_oid, data_buf,
+ cmd_ptr);
+ break;
+ default:
+ ret = mwifiex_sta_prepare_cmd(priv, cmd_no, cmd_action,
+ cmd_oid, data_buf,
+ cmd_ptr);
+ break;
+ }
} else {
ret = mwifiex_cmd_host_cmd(priv, cmd_ptr, data_buf);
cmd_node->cmd_flag |= CMD_F_HOSTCMD;
diff --git a/drivers/net/wireless/mwifiex/fw.h b/drivers/net/wireless/mwifiex/fw.h
index 3996918..5caa826 100644
--- a/drivers/net/wireless/mwifiex/fw.h
+++ b/drivers/net/wireless/mwifiex/fw.h
@@ -210,6 +210,9 @@ enum MWIFIEX_802_11_PRIVACY_FILTER {
#define HostCmd_CMD_RSSI_INFO 0x00a4
#define HostCmd_CMD_FUNC_INIT 0x00a9
#define HostCmd_CMD_FUNC_SHUTDOWN 0x00aa
+#define HostCmd_CMD_UAP_SYS_CONFIG 0x00b0
+#define HostCmd_CMD_UAP_BSS_START 0x00b1
+#define HostCmd_CMD_UAP_BSS_STOP 0x00b2
#define HostCmd_CMD_11N_CFG 0x00cd
#define HostCmd_CMD_11N_ADDBA_REQ 0x00ce
#define HostCmd_CMD_11N_ADDBA_RSP 0x00cf
diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index ed978de..24db86f 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -762,6 +762,9 @@ int mwifiex_process_rx_packet(struct mwifiex_adapter *adapter,
int mwifiex_sta_prepare_cmd(struct mwifiex_private *, uint16_t cmd_no,
u16 cmd_action, u32 cmd_oid,
void *data_buf, void *cmd_buf);
+int mwifiex_uap_prepare_cmd(struct mwifiex_private *priv, uint16_t cmd_no,
+ u16 cmd_action, u32 cmd_oid,
+ void *data_buf, void *cmd_buf);
int mwifiex_process_sta_cmdresp(struct mwifiex_private *, u16 cmdresp_no,
struct host_cmd_ds_command *resp);
int mwifiex_process_sta_rx_packet(struct mwifiex_adapter *,
diff --git a/drivers/net/wireless/mwifiex/sta_cmdresp.c b/drivers/net/wireless/mwifiex/sta_cmdresp.c
index 3aa5424..a79ed9b 100644
--- a/drivers/net/wireless/mwifiex/sta_cmdresp.c
+++ b/drivers/net/wireless/mwifiex/sta_cmdresp.c
@@ -944,6 +944,14 @@ int mwifiex_process_sta_cmdresp(struct mwifiex_private *priv, u16 cmdresp_no,
case HostCmd_CMD_802_11_SUBSCRIBE_EVENT:
ret = mwifiex_ret_subsc_evt(priv, resp, data_buf);
break;
+ case HostCmd_CMD_UAP_SYS_CONFIG:
+ break;
+ case HostCmd_CMD_UAP_BSS_START:
+ priv->bss_started = 1;
+ break;
+ case HostCmd_CMD_UAP_BSS_STOP:
+ priv->bss_started = 0;
+ break;
default:
dev_err(adapter->dev, "CMD_RESP: unknown cmd response %#x\n",
resp->command);
diff --git a/drivers/net/wireless/mwifiex/uap_cmd.c b/drivers/net/wireless/mwifiex/uap_cmd.c
new file mode 100644
index 0000000..74187b2
--- /dev/null
+++ b/drivers/net/wireless/mwifiex/uap_cmd.c
@@ -0,0 +1,46 @@
+/*
+ * Marvell Wireless LAN device driver: AP specific command handling
+ *
+ * Copyright (C) 2012, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License"). You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available by writing to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
+ * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED. The License provides additional details about
+ * this warranty disclaimer.
+ */
+
+#include "main.h"
+
+/* This function prepares the AP specific commands before sending them
+ * to the firmware.
+ * This is a generic function which calls specific command preparation
+ * routines based upon the command number.
+ */
+int mwifiex_uap_prepare_cmd(struct mwifiex_private *priv, u16 cmd_no,
+ u16 cmd_action, u32 cmd_oid,
+ void *data_buf, void *cmd_buf)
+{
+ struct host_cmd_ds_command *cmd = cmd_buf;
+
+ switch (cmd_no) {
+ case HostCmd_CMD_UAP_BSS_START:
+ case HostCmd_CMD_UAP_BSS_STOP:
+ cmd->command = cpu_to_le16(cmd_no);
+ cmd->size = cpu_to_le16(S_DS_GEN);
+ break;
+ default:
+ dev_err(priv->adapter->dev,
+ "PREP_CMD: unknown cmd- %#x\n", cmd_no);
+ return -1;
+ }
+
+ return 0;
+}
--
1.7.0.2
next prev parent reply other threads:[~2012-05-03 7:23 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-03 7:22 [PATCH 00/18] mwifiex: add AP support Bing Zhao
2012-05-03 7:22 ` [PATCH 01/18] mwifiex: allocate space for one more mwifiex_private structure Bing Zhao
2012-05-03 7:22 ` [PATCH 02/18] mwifiex: handle station specific commands on STA interface only Bing Zhao
2012-05-03 7:22 ` [PATCH 03/18] mwifiex: support for creation of AP interface Bing Zhao
2012-05-03 7:22 ` [PATCH 04/18] mwifiex: multi-interface support for mwifiex Bing Zhao
2012-05-03 7:22 ` [PATCH 05/18] mwifiex: save adapter pointer in wiphy_priv Bing Zhao
2012-05-03 7:22 ` [PATCH 06/18] mwifiex: append peer mac address TLV in key material command to firmware Bing Zhao
2012-05-03 7:22 ` Bing Zhao [this message]
2012-05-03 7:22 ` [PATCH 08/18] mwifiex: add AP command sys_config and set channel Bing Zhao
2012-05-03 7:22 ` [PATCH 09/18] mwifiex: stop BSS in deauthentication handling Bing Zhao
2012-05-03 7:22 ` [PATCH 10/18] mwifiex: handle interface type changes correctly Bing Zhao
2012-05-03 7:22 ` [PATCH 11/18] mwifiex: common set_wiphy_params cfg80211 handler for AP and STA interface Bing Zhao
2012-05-03 7:22 ` [PATCH 12/18] mwifiex: add cfg80211 start_ap and stop_ap handlers Bing Zhao
2012-05-03 7:22 ` [PATCH 13/18] mwifiex: add AP event handling framework Bing Zhao
2012-05-03 7:22 ` [PATCH 14/18] mwifiex: add WPA2 support for AP Bing Zhao
2012-05-03 7:22 ` [PATCH 15/18] mwifiex: rearrange AP sys configure code Bing Zhao
2012-05-03 7:22 ` [PATCH 16/18] mwifiex: add custom IE framework Bing Zhao
2012-05-03 7:22 ` [PATCH 17/18] mwifiex: parse beacon, probe response and assoc response IEs from start_ap Bing Zhao
2012-05-03 14:19 ` Johannes Berg
2012-05-03 19:43 ` Bing Zhao
2012-05-08 19:43 ` Bing Zhao
2012-05-03 7:22 ` [PATCH 18/18] mwifiex: delete IEs when stop_ap Bing Zhao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1336029760-22565-8-git-send-email-bzhao@marvell.com \
--to=bzhao@marvell.com \
--cc=akarwar@marvell.com \
--cc=dkiran@marvell.com \
--cc=frankh@marvell.com \
--cc=harvey.huawei.yang@gmail.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=patila@marvell.com \
--cc=piaoyun@marvell.com \
--cc=yogeshp@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).