From: Arik Nemtsov <arik@wizery.com>
To: <linux-wireless@vger.kernel.org>
Cc: Luciano Coelho <coelho@ti.com>, Arik Nemtsov <arik@wizery.com>
Subject: [PATCH 36/78] wl18xx: read clock frequency and do top init accordingly
Date: Thu, 10 May 2012 12:13:41 +0300 [thread overview]
Message-ID: <1336641263-5761-37-git-send-email-arik@wizery.com> (raw)
In-Reply-To: <1336641263-5761-1-git-send-email-arik@wizery.com>
From: Luciano Coelho <coelho@ti.com>
Instead of using hardcoded values for a single frequency, we need to
read the frequency and use the appropriate values for it in the top
initialization.
Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
---
drivers/net/wireless/ti/wl18xx/Makefile | 2 +-
drivers/net/wireless/ti/wl18xx/io.c | 60 +++++++++++++++++++++++++++++++
drivers/net/wireless/ti/wl18xx/io.h | 28 +++++++++++++++
drivers/net/wireless/ti/wl18xx/main.c | 51 ++++++++++++++++++++++++--
drivers/net/wireless/ti/wl18xx/reg.h | 22 ++++++++++++
drivers/net/wireless/ti/wl18xx/wl18xx.h | 22 ++++++++++++
6 files changed, 181 insertions(+), 4 deletions(-)
create mode 100644 drivers/net/wireless/ti/wl18xx/io.c
create mode 100644 drivers/net/wireless/ti/wl18xx/io.h
diff --git a/drivers/net/wireless/ti/wl18xx/Makefile b/drivers/net/wireless/ti/wl18xx/Makefile
index 764d598..abd881f 100644
--- a/drivers/net/wireless/ti/wl18xx/Makefile
+++ b/drivers/net/wireless/ti/wl18xx/Makefile
@@ -1,3 +1,3 @@
-wl18xx-objs = main.o acx.o tx.o
+wl18xx-objs = main.o acx.o tx.o io.o
obj-$(CONFIG_WL18XX) += wl18xx.o
diff --git a/drivers/net/wireless/ti/wl18xx/io.c b/drivers/net/wireless/ti/wl18xx/io.c
new file mode 100644
index 0000000..598c057
--- /dev/null
+++ b/drivers/net/wireless/ti/wl18xx/io.c
@@ -0,0 +1,60 @@
+/*
+ * This file is part of wl18xx
+ *
+ * Copyright (C) 2011 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "../wlcore/wlcore.h"
+#include "../wlcore/io.h"
+
+#include "io.h"
+
+void wl18xx_top_reg_write(struct wl1271 *wl, int addr, u16 val)
+{
+ u32 tmp;
+
+ if (WARN_ON(addr % 2))
+ return;
+
+ if ((addr % 4) == 0) {
+ tmp = wl1271_read32(wl, addr);
+ tmp = (tmp & 0xffff0000) | val;
+ wl1271_write32(wl, addr, tmp);
+ } else {
+ tmp = wl1271_read32(wl, addr - 2);
+ tmp = (tmp & 0xffff) | (val << 16);
+ wl1271_write32(wl, addr - 2, tmp);
+ }
+}
+
+u16 wl18xx_top_reg_read(struct wl1271 *wl, int addr)
+{
+ u32 val;
+
+ if (WARN_ON(addr % 2))
+ return 0;
+
+ if ((addr % 4) == 0) {
+ /* address is 4-bytes aligned */
+ val = wl1271_read32(wl, addr);
+ return val & 0xffff;
+ } else {
+ val = wl1271_read32(wl, addr - 2);
+ return (val & 0xffff0000) >> 16;
+ }
+}
diff --git a/drivers/net/wireless/ti/wl18xx/io.h b/drivers/net/wireless/ti/wl18xx/io.h
new file mode 100644
index 0000000..be4e126
--- /dev/null
+++ b/drivers/net/wireless/ti/wl18xx/io.h
@@ -0,0 +1,28 @@
+/*
+ * This file is part of wl18xx
+ *
+ * Copyright (C) 2011 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL18XX_IO_H__
+#define __WL18XX_IO_H__
+
+void wl18xx_top_reg_write(struct wl1271 *wl, int addr, u16 val);
+u16 wl18xx_top_reg_read(struct wl1271 *wl, int addr);
+
+#endif /* __WL18XX_IO_H__ */
diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c
index 0f07886..ce13249 100644
--- a/drivers/net/wireless/ti/wl18xx/main.c
+++ b/drivers/net/wireless/ti/wl18xx/main.c
@@ -37,6 +37,7 @@
#include "acx.h"
#include "tx.h"
#include "wl18xx.h"
+#include "io.h"
#define WL18XX_RX_CHECKSUM_MASK 0x40
@@ -561,6 +562,18 @@ static const int wl18xx_rtable[REG_TABLE_LEN] = {
[REG_RAW_FW_STATUS_ADDR] = WL18XX_FW_STATUS_ADDR,
};
+static const struct wl18xx_clk_cfg wl18xx_clk_table[NUM_CLOCK_CONFIGS] = {
+ [CLOCK_CONFIG_16_2_M] = { 7, 104, 801, 4, true },
+ [CLOCK_CONFIG_16_368_M] = { 9, 132, 3751, 4, true },
+ [CLOCK_CONFIG_16_8_M] = { 7, 100, 0, 0, false },
+ [CLOCK_CONFIG_19_2_M] = { 8, 100, 0, 0, false },
+ [CLOCK_CONFIG_26_M] = { 13, 120, 0, 0, false },
+ [CLOCK_CONFIG_32_736_M] = { 9, 132, 3751, 4, true },
+ [CLOCK_CONFIG_33_6_M] = { 7, 100, 0, 0, false },
+ [CLOCK_CONFIG_38_468_M] = { 8, 100, 0, 0, false },
+ [CLOCK_CONFIG_52_M] = { 13, 120, 0, 0, false },
+};
+
/* TODO: maybe move to a new header file? */
#define WL18XX_FW_NAME "ti-connectivity/wl18xx-fw.bin"
@@ -592,15 +605,47 @@ out:
static void wl18xx_set_clk(struct wl1271 *wl)
{
struct wl18xx_priv *priv = wl->priv;
+ u32 clk_freq;
/* write the translated board type to SCR_PAD2 */
wl1271_write32(wl, WL18XX_SCR_PAD2,
wl18xx_board_type_to_scrpad2[priv->board_type]);
wlcore_set_partition(wl, &wl->ptable[PART_TOP_PRCM_ELP_SOC]);
- wl1271_write32(wl, 0x00A02360, 0xD0078);
- wl1271_write32(wl, 0x00A0236c, 0x12);
- wl1271_write32(wl, 0x00A02390, 0x20118);
+
+ /* TODO: PG2: apparently we need to read the clk type */
+
+ clk_freq = wl18xx_top_reg_read(wl, PRIMARY_CLK_DETECT);
+ wl1271_debug(DEBUG_BOOT, "clock freq %d (%d, %d, %d, %d, %s)", clk_freq,
+ wl18xx_clk_table[clk_freq].n, wl18xx_clk_table[clk_freq].m,
+ wl18xx_clk_table[clk_freq].p, wl18xx_clk_table[clk_freq].q,
+ wl18xx_clk_table[clk_freq].swallow ? "swallow" : "spit");
+
+ wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_N, wl18xx_clk_table[clk_freq].n);
+ wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_M, wl18xx_clk_table[clk_freq].m);
+
+ if (wl18xx_clk_table[clk_freq].swallow) {
+ /* first the 16 lower bits */
+ wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_Q_FACTOR_CFG_1,
+ wl18xx_clk_table[clk_freq].q &
+ PLLSH_WCS_PLL_Q_FACTOR_CFG_1_MASK);
+ /* then the 16 higher bits, masked out */
+ wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_Q_FACTOR_CFG_2,
+ (wl18xx_clk_table[clk_freq].q >> 16) &
+ PLLSH_WCS_PLL_Q_FACTOR_CFG_2_MASK);
+
+ /* first the 16 lower bits */
+ wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_P_FACTOR_CFG_1,
+ wl18xx_clk_table[clk_freq].p &
+ PLLSH_WCS_PLL_P_FACTOR_CFG_1_MASK);
+ /* then the 16 higher bits, masked out */
+ wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_P_FACTOR_CFG_2,
+ (wl18xx_clk_table[clk_freq].p >> 16) &
+ PLLSH_WCS_PLL_P_FACTOR_CFG_2_MASK);
+ } else {
+ wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_SWALLOW_EN,
+ PLLSH_WCS_PLL_SWALLOW_EN_VAL2);
+ }
}
static void wl18xx_boot_soft_reset(struct wl1271 *wl)
diff --git a/drivers/net/wireless/ti/wl18xx/reg.h b/drivers/net/wireless/ti/wl18xx/reg.h
index e0170ae..1ea3393 100644
--- a/drivers/net/wireless/ti/wl18xx/reg.h
+++ b/drivers/net/wireless/ti/wl18xx/reg.h
@@ -107,6 +107,28 @@
#define WL18XX_WELP_ARM_COMMAND (WL18XX_REGISTERS_BASE + 0x7100)
#define WL18XX_ENABLE (WL18XX_REGISTERS_BASE + 0x01543C)
+/* PRCM registers */
+#define PLATFORM_DETECTION 0xA0E3E0
+#define OCS_EN 0xA02080
+#define PRIMARY_CLK_DETECT 0xA020A6
+#define PLLSH_WCS_PLL_N 0xA02362
+#define PLLSH_WCS_PLL_M 0xA02360
+#define PLLSH_WCS_PLL_Q_FACTOR_CFG_1 0xA02364
+#define PLLSH_WCS_PLL_Q_FACTOR_CFG_2 0xA02366
+#define PLLSH_WCS_PLL_P_FACTOR_CFG_1 0xA02368
+#define PLLSH_WCS_PLL_P_FACTOR_CFG_2 0xA0236A
+#define PLLSH_WCS_PLL_SWALLOW_EN 0xA0236C
+#define PLLSH_WL_PLL_EN 0xA02392
+
+#define PLLSH_WCS_PLL_Q_FACTOR_CFG_1_MASK 0xFFFF
+#define PLLSH_WCS_PLL_Q_FACTOR_CFG_2_MASK 0x007F
+#define PLLSH_WCS_PLL_P_FACTOR_CFG_1_MASK 0xFFFF
+#define PLLSH_WCS_PLL_P_FACTOR_CFG_2_MASK 0x000F
+
+#define PLLSH_WCS_PLL_SWALLOW_EN_VAL1 0x1
+#define PLLSH_WCS_PLL_SWALLOW_EN_VAL2 0x12
+
+
#define WL18XX_CMD_MBOX_ADDRESS 0xB007B4
#define WL18XX_FW_STATUS_ADDR 0x50F8
diff --git a/drivers/net/wireless/ti/wl18xx/wl18xx.h b/drivers/net/wireless/ti/wl18xx/wl18xx.h
index 5bcc7f0..75abb5b 100644
--- a/drivers/net/wireless/ti/wl18xx/wl18xx.h
+++ b/drivers/net/wireless/ti/wl18xx/wl18xx.h
@@ -56,4 +56,26 @@ struct wl18xx_fw_status_priv {
u8 padding[2];
};
+struct wl18xx_clk_cfg {
+ u32 n;
+ u32 m;
+ u32 p;
+ u32 q;
+ bool swallow;
+};
+
+enum {
+ CLOCK_CONFIG_16_2_M = 1,
+ CLOCK_CONFIG_16_368_M,
+ CLOCK_CONFIG_16_8_M,
+ CLOCK_CONFIG_19_2_M,
+ CLOCK_CONFIG_26_M,
+ CLOCK_CONFIG_32_736_M,
+ CLOCK_CONFIG_33_6_M,
+ CLOCK_CONFIG_38_468_M,
+ CLOCK_CONFIG_52_M,
+
+ NUM_CLOCK_CONFIGS,
+};
+
#endif /* __WL18XX_PRIV_H__ */
--
1.7.9.5
next prev parent reply other threads:[~2012-05-10 9:15 UTC|newest]
Thread overview: 86+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-10 9:13 [PATCH 00/78] 18xx chip support Arik Nemtsov
2012-05-10 9:13 ` [PATCH 01/78] wl18xx: add new module Arik Nemtsov
2012-05-10 9:13 ` [PATCH 02/78] wlcore_sdio/wl18xx: use SDIO revision number to identify wl18xx chips Arik Nemtsov
2012-05-10 9:13 ` [PATCH 03/78] wl18xx: add empty operations struct Arik Nemtsov
2012-05-10 9:13 ` [PATCH 04/78] wl18xx: add partition table Arik Nemtsov
2012-05-10 9:13 ` [PATCH 05/78] wl18xx: add register table Arik Nemtsov
2012-05-10 9:13 ` [PATCH 06/78] wl18xx: add identify chip operation Arik Nemtsov
2012-05-10 9:13 ` [PATCH 07/78] wl18xx: add some boot operations and hw-specific configurations Arik Nemtsov
2012-05-10 9:13 ` [PATCH 08/78] wl18xx: add trigger command and ack event operations Arik Nemtsov
2012-05-10 9:13 ` [PATCH 09/78] wl18xx: create per-chip-family private storage Arik Nemtsov
2012-05-10 9:13 ` [PATCH 10/78] wl18xx: set the number of Tx descriptors Arik Nemtsov
2012-05-10 9:13 ` [PATCH 11/78] wl18xx: set normal/GEM Tx spare block counts Arik Nemtsov
2012-05-10 9:13 ` [PATCH 12/78] wl18xx: implement hw op for calculating hw block count per packet Arik Nemtsov
2012-05-10 9:13 ` [PATCH 13/78] wl18xx: implement hw op for setting blocks in hw_tx_desc Arik Nemtsov
2012-05-10 9:13 ` [PATCH 14/78] wl18xx: implement hw op for setting frame length in tx_hw_desc Arik Nemtsov
2012-05-10 9:13 ` [PATCH 15/78] wl18xx: define HW-rate translation elements/tables Arik Nemtsov
2012-05-10 9:13 ` [PATCH 16/78] wl18xx: add fw_status private data Arik Nemtsov
2012-05-10 9:13 ` [PATCH 17/78] wl18xx: set Rx block-size alignment quirk Arik Nemtsov
2012-05-10 9:13 ` [PATCH 18/78] wl18xx: implement hw op for getting rx buffer data alignment Arik Nemtsov
2012-05-10 9:13 ` [PATCH 19/78] wl18xx: implement hw op for getting rx packet data length Arik Nemtsov
2012-05-10 9:13 ` [PATCH 20/78] wl18xx: implement immediate Tx completion Arik Nemtsov
2012-05-10 9:13 ` [PATCH 21/78] wl18xx: add hw_init operation Arik Nemtsov
2012-05-10 9:13 ` [PATCH 22/78] wlcore/wl18xx: add hw op for setting Tx HW checksum Arik Nemtsov
2012-05-10 9:13 ` [PATCH 23/78] wlcore/wl18xx: add hw op for Rx " Arik Nemtsov
2012-05-10 9:13 ` [PATCH 24/78] wl18xx: add runtime configuration parameters Arik Nemtsov
2012-05-10 9:13 ` [PATCH 25/78] wlcore: track current channel type per vif Arik Nemtsov
2012-05-10 9:13 ` [PATCH 26/78] wl18xx: send channel type to FW on role start Arik Nemtsov
2012-05-10 9:13 ` [PATCH 27/78] wl18xx: ipmlement ap_rate_mask hw op Arik Nemtsov
2012-05-10 9:13 ` [PATCH 28/78] wlcore: support peer MIMO rates Arik Nemtsov
2012-05-10 9:13 ` [PATCH 29/78] wlcore/wl18xx: enable MIMO/wide-chan rates in AP-mode rate config Arik Nemtsov
2012-05-10 9:13 ` [PATCH 30/78] wl18xx: set HT capabilities Arik Nemtsov
2012-05-10 9:13 ` [PATCH 31/78] wl18xx: add module param for overriding HT caps Arik Nemtsov
2012-05-10 9:13 ` [PATCH 32/78] wl18xx: add board type module argument Arik Nemtsov
2012-05-10 9:13 ` [PATCH 33/78] wl18xx: translate and write the board type to SCR_PAD2 Arik Nemtsov
2012-05-10 9:13 ` [PATCH 34/78] wl18xx: read FW pc on recovery Arik Nemtsov
2012-05-10 9:13 ` [PATCH 35/78] wl18xx: disable FW log functionality Arik Nemtsov
2012-05-10 9:13 ` Arik Nemtsov [this message]
2012-05-10 9:13 ` [PATCH 37/78] wlcore: rename wl12xx.h to wlcore_i.h Arik Nemtsov
2012-05-10 9:13 ` [PATCH 38/78] wlcore/wl12xx: move ref_clock and tcxo_clock elements to wl12xx Arik Nemtsov
2012-05-10 9:13 ` [PATCH 39/78] wl18xx: implement hw op to read PG version Arik Nemtsov
2012-05-10 9:13 ` [PATCH 40/78] wlcore/wl12xx: move rx_mem_pool_addr element to wl12xx Arik Nemtsov
2012-05-10 9:13 ` [PATCH 41/78] wl18xx: init Tx-released index to 0 on HW init Arik Nemtsov
2012-05-10 9:13 ` [PATCH 42/78] wl18xx: don't upload NVS to FW Arik Nemtsov
2012-05-10 9:13 ` [PATCH 43/78] wl18xx: change board type enum according to new FW Arik Nemtsov
2012-05-10 9:13 ` [PATCH 44/78] wlcore/wl12xx: add plt_init op and move the code to wl12xx Arik Nemtsov
2012-05-10 9:13 ` [PATCH 45/78] wl18xx: add plt_init operation Arik Nemtsov
2012-05-10 9:13 ` [PATCH 46/78] wl18xx: change the low_band_component_type for HDK boards Arik Nemtsov
2012-05-10 9:13 ` [PATCH 47/78] wl18xx: add number of antennas and dc2dc type as module params Arik Nemtsov
2012-05-10 9:13 ` [PATCH 48/78] wl18xx: add module parameter to disable TCP checksum Arik Nemtsov
2012-05-10 9:13 ` [PATCH 49/78] wlcore/wl12xx/18xx: split fw_status struct into two Arik Nemtsov
2012-05-10 9:13 ` [PATCH 50/78] wl18xx: derive the MAC address from the BD_ADDR in fuse ROM Arik Nemtsov
2012-05-10 9:13 ` [PATCH 51/78] wl18xx: add a module parameter to control 11a support Arik Nemtsov
2012-05-10 9:13 ` [PATCH 52/78] wlcore: add module parameter to dump SDIO reads and writes Arik Nemtsov
2012-05-10 9:13 ` [PATCH 53/78] wl18xx: copy the default configuration before checking the board_type Arik Nemtsov
2012-05-10 9:13 ` [PATCH 54/78] wl18xx: changed default board_type to HDK Arik Nemtsov
2012-05-10 9:14 ` [PATCH 55/78] wlcore: add space for private area when allocating fw_status Arik Nemtsov
2012-05-10 9:14 ` [PATCH 56/78] wl18xx: change low_band_component_type value for COM8 Arik Nemtsov
2012-05-10 9:14 ` [PATCH 57/78] wlcore: reorder identify_chip and get_hw_info Arik Nemtsov
2012-05-10 9:14 ` [PATCH 58/78] wl18xx: disable MCS_13 for wl18xx PG 1.0 Arik Nemtsov
2012-05-10 9:14 ` [PATCH 59/78] wlcore: update beacon and probe_resp templates when rates change Arik Nemtsov
2012-05-10 9:14 ` [PATCH 60/78] wlcore: use all AP basic rates as default Arik Nemtsov
2012-05-10 9:14 ` [PATCH 61/78] wlcore: abstract debugfs fw_stats to be handled by the lower drivers Arik Nemtsov
2012-05-10 9:14 ` [PATCH 62/78] wlcore: add debugfs macro to help print fw statistics arrays Arik Nemtsov
2012-05-10 9:14 ` [PATCH 63/78] wl12xx: implement fw status debugfs entries Arik Nemtsov
2012-05-10 9:14 ` [PATCH 64/78] wl18xx: " Arik Nemtsov
2012-05-10 9:14 ` [PATCH 65/78] wlcore: create private static_data area and add operation to parse it Arik Nemtsov
2012-05-10 9:14 ` [PATCH 66/78] wl18xx: print the PHY firmware version from the private static data Arik Nemtsov
2012-05-10 9:14 ` [PATCH 67/78] wlcore: print the interrupt status when recovery is triggered Arik Nemtsov
2012-05-10 9:14 ` [PATCH 68/78] wl18xx: don't use MIMO when ht_mode is set to wide Arik Nemtsov
2012-05-10 9:14 ` [PATCH 69/78] wlcore: use proper values for supported local rates Arik Nemtsov
2012-05-10 9:14 ` [PATCH 70/78] wl18xx: add module parameter to force SISO 20MHz Arik Nemtsov
2012-05-10 9:14 ` [PATCH 71/78] wl18xx: add power limit reference value to mac_and_phy settings Arik Nemtsov
2012-05-10 9:14 ` [PATCH 72/78] wl18xx: export low/high band component values as module params Arik Nemtsov
2012-05-10 9:14 ` [PATCH 73/78] wl18xx: export pwr_limit_reference_11_abg value as a module parameter Arik Nemtsov
2012-05-10 9:14 ` [PATCH 74/78] wlcore/wl12xx/wl18xx: move lower driver debugfs to a subdir Arik Nemtsov
2012-05-10 9:14 ` [PATCH 75/78] wlcore: increase aggregation buffer size by one page Arik Nemtsov
2012-05-10 9:14 ` [PATCH 76/78] wl18xx: increase tx_ba_win_size to 64 Arik Nemtsov
2012-05-10 9:14 ` [PATCH 77/78] wl18xx: use new fw stats structures Arik Nemtsov
2012-05-10 9:14 ` [PATCH 78/78] wl18xx: change default tcp_checksum to false Arik Nemtsov
2012-05-10 9:50 ` [PATCH 00/78] 18xx chip support Kalle Valo
2012-05-10 10:11 ` Arik Nemtsov
2012-05-10 10:15 ` Kalle Valo
2012-05-10 10:25 ` Arik Nemtsov
2012-05-11 5:57 ` Luciano Coelho
2012-05-11 9:03 ` Kalle Valo
2012-06-05 14:04 ` Luciano Coelho
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1336641263-5761-37-git-send-email-arik@wizery.com \
--to=arik@wizery.com \
--cc=coelho@ti.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).