From: Arik Nemtsov <arik@wizery.com>
To: <linux-wireless@vger.kernel.org>
Cc: Luciano Coelho <coelho@ti.com>, Arik Nemtsov <arik@wizery.com>
Subject: [PATCH 38/78] wlcore/wl12xx: move ref_clock and tcxo_clock elements to wl12xx
Date: Thu, 10 May 2012 12:13:43 +0300 [thread overview]
Message-ID: <1336641263-5761-39-git-send-email-arik@wizery.com> (raw)
In-Reply-To: <1336641263-5761-1-git-send-email-arik@wizery.com>
From: Luciano Coelho <coelho@ti.com>
Only wl12xx needs to get the ref_clock anc tcxo_clock values from the
platform data. Move these elements from the wl1271 structure to
wl12xx's private data.
Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
---
drivers/net/wireless/ti/wl12xx/cmd.c | 8 ++-
drivers/net/wireless/ti/wl12xx/main.c | 88 +++++++++++++++++++++++++-----
drivers/net/wireless/ti/wl12xx/wl12xx.h | 3 +
drivers/net/wireless/ti/wlcore/debugfs.c | 3 +-
drivers/net/wireless/ti/wlcore/main.c | 2 -
drivers/net/wireless/ti/wlcore/wlcore.h | 3 -
6 files changed, 82 insertions(+), 25 deletions(-)
diff --git a/drivers/net/wireless/ti/wl12xx/cmd.c b/drivers/net/wireless/ti/wl12xx/cmd.c
index 8ffaeb5..50ba748 100644
--- a/drivers/net/wireless/ti/wl12xx/cmd.c
+++ b/drivers/net/wireless/ti/wl12xx/cmd.c
@@ -65,6 +65,7 @@ int wl1271_cmd_general_parms(struct wl1271 *wl)
struct wl1271_general_parms_cmd *gen_parms;
struct wl1271_ini_general_params *gp =
&((struct wl1271_nvs_file *)wl->nvs)->general_params;
+ struct wl12xx_priv *priv = wl->priv;
bool answer = false;
int ret;
@@ -88,7 +89,7 @@ int wl1271_cmd_general_parms(struct wl1271 *wl)
answer = true;
/* Override the REF CLK from the NVS with the one from platform data */
- gen_parms->general_params.ref_clock = wl->ref_clock;
+ gen_parms->general_params.ref_clock = priv->ref_clock;
ret = wl1271_cmd_test(wl, gen_parms, sizeof(*gen_parms), answer);
if (ret < 0) {
@@ -118,6 +119,7 @@ int wl128x_cmd_general_parms(struct wl1271 *wl)
struct wl128x_general_parms_cmd *gen_parms;
struct wl128x_ini_general_params *gp =
&((struct wl128x_nvs_file *)wl->nvs)->general_params;
+ struct wl12xx_priv *priv = wl->priv;
bool answer = false;
int ret;
@@ -141,8 +143,8 @@ int wl128x_cmd_general_parms(struct wl1271 *wl)
answer = true;
/* Replace REF and TCXO CLKs with the ones from platform data */
- gen_parms->general_params.ref_clock = wl->ref_clock;
- gen_parms->general_params.tcxo_ref_clock = wl->tcxo_clock;
+ gen_parms->general_params.ref_clock = priv->ref_clock;
+ gen_parms->general_params.tcxo_ref_clock = priv->tcxo_clock;
ret = wl1271_cmd_test(wl, gen_parms, sizeof(*gen_parms), answer);
if (ret < 0) {
diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c
index ad760a3..962d85d 100644
--- a/drivers/net/wireless/ti/wl12xx/main.c
+++ b/drivers/net/wireless/ti/wl12xx/main.c
@@ -40,6 +40,9 @@
#include "cmd.h"
#include "acx.h"
+static char *fref_param;
+static char *tcxo_param;
+
static struct wlcore_conf wl12xx_conf = {
.sg = {
.params = {
@@ -773,6 +776,7 @@ static int wl128x_configure_mcs_pll(struct wl1271 *wl, int clk)
u16 spare_reg;
u16 pll_config;
u8 input_freq;
+ struct wl12xx_priv *priv = wl->priv;
/* Mask bits [3:1] in the sys_clk_cfg register */
spare_reg = wl12xx_top_reg_read(wl, WL_SPARE_REG);
@@ -782,8 +786,8 @@ static int wl128x_configure_mcs_pll(struct wl1271 *wl, int clk)
wl12xx_top_reg_write(wl, WL_SPARE_REG, spare_reg);
/* Handle special cases of the TCXO clock */
- if (wl->tcxo_clock == WL12XX_TCXOCLOCK_16_8 ||
- wl->tcxo_clock == WL12XX_TCXOCLOCK_33_6)
+ if (priv->tcxo_clock == WL12XX_TCXOCLOCK_16_8 ||
+ priv->tcxo_clock == WL12XX_TCXOCLOCK_33_6)
return wl128x_manually_configure_mcs_pll(wl);
/* Set the input frequency according to the selected clock source */
@@ -808,11 +812,12 @@ static int wl128x_configure_mcs_pll(struct wl1271 *wl, int clk)
*/
static int wl128x_boot_clk(struct wl1271 *wl, int *selected_clock)
{
+ struct wl12xx_priv *priv = wl->priv;
u16 sys_clk_cfg;
/* For XTAL-only modes, FREF will be used after switching from TCXO */
- if (wl->ref_clock == WL12XX_REFCLOCK_26_XTAL ||
- wl->ref_clock == WL12XX_REFCLOCK_38_XTAL) {
+ if (priv->ref_clock == WL12XX_REFCLOCK_26_XTAL ||
+ priv->ref_clock == WL12XX_REFCLOCK_38_XTAL) {
if (!wl128x_switch_tcxo_to_fref(wl))
return -EINVAL;
goto fref_clk;
@@ -826,8 +831,8 @@ static int wl128x_boot_clk(struct wl1271 *wl, int *selected_clock)
goto fref_clk;
/* If TCXO is either 32.736MHz or 16.368MHz, switch to FREF */
- if (wl->tcxo_clock == WL12XX_TCXOCLOCK_16_368 ||
- wl->tcxo_clock == WL12XX_TCXOCLOCK_32_736) {
+ if (priv->tcxo_clock == WL12XX_TCXOCLOCK_16_368 ||
+ priv->tcxo_clock == WL12XX_TCXOCLOCK_32_736) {
if (!wl128x_switch_tcxo_to_fref(wl))
return -EINVAL;
goto fref_clk;
@@ -836,14 +841,14 @@ static int wl128x_boot_clk(struct wl1271 *wl, int *selected_clock)
/* TCXO clock is selected */
if (!wl128x_is_tcxo_valid(wl))
return -EINVAL;
- *selected_clock = wl->tcxo_clock;
+ *selected_clock = priv->tcxo_clock;
goto config_mcs_pll;
fref_clk:
/* FREF clock is selected */
if (!wl128x_is_fref_valid(wl))
return -EINVAL;
- *selected_clock = wl->ref_clock;
+ *selected_clock = priv->ref_clock;
config_mcs_pll:
return wl128x_configure_mcs_pll(wl, *selected_clock);
@@ -851,25 +856,26 @@ config_mcs_pll:
static int wl127x_boot_clk(struct wl1271 *wl)
{
+ struct wl12xx_priv *priv = wl->priv;
u32 pause;
u32 clk;
if (WL127X_PG_GET_MAJOR(wl->hw_pg_ver) < 3)
wl->quirks |= WLCORE_QUIRK_END_OF_TRANSACTION;
- if (wl->ref_clock == CONF_REF_CLK_19_2_E ||
- wl->ref_clock == CONF_REF_CLK_38_4_E ||
- wl->ref_clock == CONF_REF_CLK_38_4_M_XTAL)
+ if (priv->ref_clock == CONF_REF_CLK_19_2_E ||
+ priv->ref_clock == CONF_REF_CLK_38_4_E ||
+ priv->ref_clock == CONF_REF_CLK_38_4_M_XTAL)
/* ref clk: 19.2/38.4/38.4-XTAL */
clk = 0x3;
- else if (wl->ref_clock == CONF_REF_CLK_26_E ||
- wl->ref_clock == CONF_REF_CLK_52_E)
+ else if (priv->ref_clock == CONF_REF_CLK_26_E ||
+ priv->ref_clock == CONF_REF_CLK_52_E)
/* ref clk: 26/52 */
clk = 0x5;
else
return -EINVAL;
- if (wl->ref_clock != CONF_REF_CLK_19_2_E) {
+ if (priv->ref_clock != CONF_REF_CLK_19_2_E) {
u16 val;
/* Set clock type (open drain) */
val = wl12xx_top_reg_read(wl, OCP_REG_CLK_TYPE);
@@ -939,6 +945,7 @@ static int wl1271_boot_soft_reset(struct wl1271 *wl)
static int wl12xx_pre_boot(struct wl1271 *wl)
{
+ struct wl12xx_priv *priv = wl->priv;
int ret = 0;
u32 clk;
int selected_clock = -1;
@@ -970,7 +977,7 @@ static int wl12xx_pre_boot(struct wl1271 *wl)
if (wl->chip.id == CHIP_ID_1283_PG20)
clk |= ((selected_clock & 0x3) << 1) << 4;
else
- clk |= (wl->ref_clock << 1) << 4;
+ clk |= (priv->ref_clock << 1) << 4;
wl1271_write32(wl, WL12XX_DRPW_SCRATCH_START, clk);
@@ -1333,6 +1340,7 @@ static struct ieee80211_sta_ht_cap wl12xx_ht_cap = {
static int __devinit wl12xx_probe(struct platform_device *pdev)
{
+ struct wl12xx_platform_data *pdata = pdev->dev.platform_data;
struct wl1271 *wl;
struct ieee80211_hw *hw;
struct wl12xx_priv *priv;
@@ -1344,6 +1352,7 @@ static int __devinit wl12xx_probe(struct platform_device *pdev)
}
wl = hw->priv;
+ priv = wl->priv;
wl->ops = &wl12xx_ops;
wl->ptable = wl12xx_ptable;
wl->rtable = wl12xx_rtable;
@@ -1357,6 +1366,48 @@ static int __devinit wl12xx_probe(struct platform_device *pdev)
memcpy(&wl->ht_cap, &wl12xx_ht_cap, sizeof(wl12xx_ht_cap));
wl12xx_conf_init(wl);
+ if (!fref_param) {
+ priv->ref_clock = pdata->board_ref_clock;
+ } else {
+ if (!strcmp(fref_param, "19.2"))
+ priv->ref_clock = WL12XX_REFCLOCK_19;
+ else if (!strcmp(fref_param, "26"))
+ priv->ref_clock = WL12XX_REFCLOCK_26;
+ else if (!strcmp(fref_param, "26x"))
+ priv->ref_clock = WL12XX_REFCLOCK_26_XTAL;
+ else if (!strcmp(fref_param, "38.4"))
+ priv->ref_clock = WL12XX_REFCLOCK_38;
+ else if (!strcmp(fref_param, "38.4x"))
+ priv->ref_clock = WL12XX_REFCLOCK_38_XTAL;
+ else if (!strcmp(fref_param, "52"))
+ priv->ref_clock = WL12XX_REFCLOCK_52;
+ else
+ wl1271_error("Invalid fref parameter %s", fref_param);
+ }
+
+ if (!tcxo_param) {
+ priv->tcxo_clock = pdata->board_tcxo_clock;
+ } else {
+ if (!strcmp(tcxo_param, "19.2"))
+ priv->tcxo_clock = WL12XX_TCXOCLOCK_19_2;
+ else if (!strcmp(tcxo_param, "26"))
+ priv->tcxo_clock = WL12XX_TCXOCLOCK_26;
+ else if (!strcmp(tcxo_param, "38.4"))
+ priv->tcxo_clock = WL12XX_TCXOCLOCK_38_4;
+ else if (!strcmp(tcxo_param, "52"))
+ priv->tcxo_clock = WL12XX_TCXOCLOCK_52;
+ else if (!strcmp(tcxo_param, "16.368"))
+ priv->tcxo_clock = WL12XX_TCXOCLOCK_16_368;
+ else if (!strcmp(tcxo_param, "32.736"))
+ priv->tcxo_clock = WL12XX_TCXOCLOCK_32_736;
+ else if (!strcmp(tcxo_param, "16.8"))
+ priv->tcxo_clock = WL12XX_TCXOCLOCK_16_8;
+ else if (!strcmp(tcxo_param, "33.6"))
+ priv->tcxo_clock = WL12XX_TCXOCLOCK_33_6;
+ else
+ wl1271_error("Invalid tcxo parameter %s", tcxo_param);
+ }
+
return wlcore_probe(wl, pdev);
}
@@ -1388,6 +1439,13 @@ static void __exit wl12xx_exit(void)
}
module_exit(wl12xx_exit);
+module_param_named(fref, fref_param, charp, 0);
+MODULE_PARM_DESC(fref, "FREF clock: 19.2, 26, 26x, 38.4, 38.4x, 52");
+
+module_param_named(tcxo, tcxo_param, charp, 0);
+MODULE_PARM_DESC(tcxo,
+ "TCXO clock: 19.2, 26, 38.4, 52, 16.368, 32.736, 16.8, 33.6");
+
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Luciano Coelho <coelho@ti.com>");
MODULE_FIRMWARE(WL127X_FW_NAME_SINGLE);
diff --git a/drivers/net/wireless/ti/wl12xx/wl12xx.h b/drivers/net/wireless/ti/wl12xx/wl12xx.h
index 74cd332..0d81c1e 100644
--- a/drivers/net/wireless/ti/wl12xx/wl12xx.h
+++ b/drivers/net/wireless/ti/wl12xx/wl12xx.h
@@ -26,6 +26,9 @@
struct wl12xx_priv {
struct wl12xx_priv_conf conf;
+
+ int ref_clock;
+ int tcxo_clock;
};
#endif /* __WL12XX_PRIV_H__ */
diff --git a/drivers/net/wireless/ti/wlcore/debugfs.c b/drivers/net/wireless/ti/wlcore/debugfs.c
index d5aea1f..d377519 100644
--- a/drivers/net/wireless/ti/wlcore/debugfs.c
+++ b/drivers/net/wireless/ti/wlcore/debugfs.c
@@ -535,8 +535,7 @@ static ssize_t driver_state_read(struct file *file, char __user *user_buf,
DRIVER_STATE_PRINT_LHEX(ap_ps_map);
DRIVER_STATE_PRINT_HEX(quirks);
DRIVER_STATE_PRINT_HEX(irq);
- DRIVER_STATE_PRINT_HEX(ref_clock);
- DRIVER_STATE_PRINT_HEX(tcxo_clock);
+ /* TODO: ref_clock and tcxo_clock were moved to wl12xx priv */
DRIVER_STATE_PRINT_HEX(hw_pg_ver);
DRIVER_STATE_PRINT_HEX(platform_quirks);
DRIVER_STATE_PRINT_HEX(chip.id);
diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index cbe94ed..414ffa8 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -5294,8 +5294,6 @@ int __devinit wlcore_probe(struct wl1271 *wl, struct platform_device *pdev)
wlcore_adjust_conf(wl);
wl->irq = platform_get_irq(pdev, 0);
- wl->ref_clock = pdata->board_ref_clock;
- wl->tcxo_clock = pdata->board_tcxo_clock;
wl->platform_quirks = pdata->platform_quirks;
wl->set_power = pdata->set_power;
wl->dev = &pdev->dev;
diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h
index 8f724da..89abbce 100644
--- a/drivers/net/wireless/ti/wlcore/wlcore.h
+++ b/drivers/net/wireless/ti/wlcore/wlcore.h
@@ -130,7 +130,6 @@ struct wl1271 {
void (*set_power)(bool enable);
int irq;
- int ref_clock;
spinlock_t wl_lock;
@@ -288,8 +287,6 @@ struct wl1271 {
/* bands supported by this instance of wl12xx */
struct ieee80211_supported_band bands[IEEE80211_NUM_BANDS];
- int tcxo_clock;
-
/*
* wowlan trigger was configured during suspend.
* (currently, only "ANY" trigger is supported)
--
1.7.9.5
next prev parent reply other threads:[~2012-05-10 9:15 UTC|newest]
Thread overview: 86+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-10 9:13 [PATCH 00/78] 18xx chip support Arik Nemtsov
2012-05-10 9:13 ` [PATCH 01/78] wl18xx: add new module Arik Nemtsov
2012-05-10 9:13 ` [PATCH 02/78] wlcore_sdio/wl18xx: use SDIO revision number to identify wl18xx chips Arik Nemtsov
2012-05-10 9:13 ` [PATCH 03/78] wl18xx: add empty operations struct Arik Nemtsov
2012-05-10 9:13 ` [PATCH 04/78] wl18xx: add partition table Arik Nemtsov
2012-05-10 9:13 ` [PATCH 05/78] wl18xx: add register table Arik Nemtsov
2012-05-10 9:13 ` [PATCH 06/78] wl18xx: add identify chip operation Arik Nemtsov
2012-05-10 9:13 ` [PATCH 07/78] wl18xx: add some boot operations and hw-specific configurations Arik Nemtsov
2012-05-10 9:13 ` [PATCH 08/78] wl18xx: add trigger command and ack event operations Arik Nemtsov
2012-05-10 9:13 ` [PATCH 09/78] wl18xx: create per-chip-family private storage Arik Nemtsov
2012-05-10 9:13 ` [PATCH 10/78] wl18xx: set the number of Tx descriptors Arik Nemtsov
2012-05-10 9:13 ` [PATCH 11/78] wl18xx: set normal/GEM Tx spare block counts Arik Nemtsov
2012-05-10 9:13 ` [PATCH 12/78] wl18xx: implement hw op for calculating hw block count per packet Arik Nemtsov
2012-05-10 9:13 ` [PATCH 13/78] wl18xx: implement hw op for setting blocks in hw_tx_desc Arik Nemtsov
2012-05-10 9:13 ` [PATCH 14/78] wl18xx: implement hw op for setting frame length in tx_hw_desc Arik Nemtsov
2012-05-10 9:13 ` [PATCH 15/78] wl18xx: define HW-rate translation elements/tables Arik Nemtsov
2012-05-10 9:13 ` [PATCH 16/78] wl18xx: add fw_status private data Arik Nemtsov
2012-05-10 9:13 ` [PATCH 17/78] wl18xx: set Rx block-size alignment quirk Arik Nemtsov
2012-05-10 9:13 ` [PATCH 18/78] wl18xx: implement hw op for getting rx buffer data alignment Arik Nemtsov
2012-05-10 9:13 ` [PATCH 19/78] wl18xx: implement hw op for getting rx packet data length Arik Nemtsov
2012-05-10 9:13 ` [PATCH 20/78] wl18xx: implement immediate Tx completion Arik Nemtsov
2012-05-10 9:13 ` [PATCH 21/78] wl18xx: add hw_init operation Arik Nemtsov
2012-05-10 9:13 ` [PATCH 22/78] wlcore/wl18xx: add hw op for setting Tx HW checksum Arik Nemtsov
2012-05-10 9:13 ` [PATCH 23/78] wlcore/wl18xx: add hw op for Rx " Arik Nemtsov
2012-05-10 9:13 ` [PATCH 24/78] wl18xx: add runtime configuration parameters Arik Nemtsov
2012-05-10 9:13 ` [PATCH 25/78] wlcore: track current channel type per vif Arik Nemtsov
2012-05-10 9:13 ` [PATCH 26/78] wl18xx: send channel type to FW on role start Arik Nemtsov
2012-05-10 9:13 ` [PATCH 27/78] wl18xx: ipmlement ap_rate_mask hw op Arik Nemtsov
2012-05-10 9:13 ` [PATCH 28/78] wlcore: support peer MIMO rates Arik Nemtsov
2012-05-10 9:13 ` [PATCH 29/78] wlcore/wl18xx: enable MIMO/wide-chan rates in AP-mode rate config Arik Nemtsov
2012-05-10 9:13 ` [PATCH 30/78] wl18xx: set HT capabilities Arik Nemtsov
2012-05-10 9:13 ` [PATCH 31/78] wl18xx: add module param for overriding HT caps Arik Nemtsov
2012-05-10 9:13 ` [PATCH 32/78] wl18xx: add board type module argument Arik Nemtsov
2012-05-10 9:13 ` [PATCH 33/78] wl18xx: translate and write the board type to SCR_PAD2 Arik Nemtsov
2012-05-10 9:13 ` [PATCH 34/78] wl18xx: read FW pc on recovery Arik Nemtsov
2012-05-10 9:13 ` [PATCH 35/78] wl18xx: disable FW log functionality Arik Nemtsov
2012-05-10 9:13 ` [PATCH 36/78] wl18xx: read clock frequency and do top init accordingly Arik Nemtsov
2012-05-10 9:13 ` [PATCH 37/78] wlcore: rename wl12xx.h to wlcore_i.h Arik Nemtsov
2012-05-10 9:13 ` Arik Nemtsov [this message]
2012-05-10 9:13 ` [PATCH 39/78] wl18xx: implement hw op to read PG version Arik Nemtsov
2012-05-10 9:13 ` [PATCH 40/78] wlcore/wl12xx: move rx_mem_pool_addr element to wl12xx Arik Nemtsov
2012-05-10 9:13 ` [PATCH 41/78] wl18xx: init Tx-released index to 0 on HW init Arik Nemtsov
2012-05-10 9:13 ` [PATCH 42/78] wl18xx: don't upload NVS to FW Arik Nemtsov
2012-05-10 9:13 ` [PATCH 43/78] wl18xx: change board type enum according to new FW Arik Nemtsov
2012-05-10 9:13 ` [PATCH 44/78] wlcore/wl12xx: add plt_init op and move the code to wl12xx Arik Nemtsov
2012-05-10 9:13 ` [PATCH 45/78] wl18xx: add plt_init operation Arik Nemtsov
2012-05-10 9:13 ` [PATCH 46/78] wl18xx: change the low_band_component_type for HDK boards Arik Nemtsov
2012-05-10 9:13 ` [PATCH 47/78] wl18xx: add number of antennas and dc2dc type as module params Arik Nemtsov
2012-05-10 9:13 ` [PATCH 48/78] wl18xx: add module parameter to disable TCP checksum Arik Nemtsov
2012-05-10 9:13 ` [PATCH 49/78] wlcore/wl12xx/18xx: split fw_status struct into two Arik Nemtsov
2012-05-10 9:13 ` [PATCH 50/78] wl18xx: derive the MAC address from the BD_ADDR in fuse ROM Arik Nemtsov
2012-05-10 9:13 ` [PATCH 51/78] wl18xx: add a module parameter to control 11a support Arik Nemtsov
2012-05-10 9:13 ` [PATCH 52/78] wlcore: add module parameter to dump SDIO reads and writes Arik Nemtsov
2012-05-10 9:13 ` [PATCH 53/78] wl18xx: copy the default configuration before checking the board_type Arik Nemtsov
2012-05-10 9:13 ` [PATCH 54/78] wl18xx: changed default board_type to HDK Arik Nemtsov
2012-05-10 9:14 ` [PATCH 55/78] wlcore: add space for private area when allocating fw_status Arik Nemtsov
2012-05-10 9:14 ` [PATCH 56/78] wl18xx: change low_band_component_type value for COM8 Arik Nemtsov
2012-05-10 9:14 ` [PATCH 57/78] wlcore: reorder identify_chip and get_hw_info Arik Nemtsov
2012-05-10 9:14 ` [PATCH 58/78] wl18xx: disable MCS_13 for wl18xx PG 1.0 Arik Nemtsov
2012-05-10 9:14 ` [PATCH 59/78] wlcore: update beacon and probe_resp templates when rates change Arik Nemtsov
2012-05-10 9:14 ` [PATCH 60/78] wlcore: use all AP basic rates as default Arik Nemtsov
2012-05-10 9:14 ` [PATCH 61/78] wlcore: abstract debugfs fw_stats to be handled by the lower drivers Arik Nemtsov
2012-05-10 9:14 ` [PATCH 62/78] wlcore: add debugfs macro to help print fw statistics arrays Arik Nemtsov
2012-05-10 9:14 ` [PATCH 63/78] wl12xx: implement fw status debugfs entries Arik Nemtsov
2012-05-10 9:14 ` [PATCH 64/78] wl18xx: " Arik Nemtsov
2012-05-10 9:14 ` [PATCH 65/78] wlcore: create private static_data area and add operation to parse it Arik Nemtsov
2012-05-10 9:14 ` [PATCH 66/78] wl18xx: print the PHY firmware version from the private static data Arik Nemtsov
2012-05-10 9:14 ` [PATCH 67/78] wlcore: print the interrupt status when recovery is triggered Arik Nemtsov
2012-05-10 9:14 ` [PATCH 68/78] wl18xx: don't use MIMO when ht_mode is set to wide Arik Nemtsov
2012-05-10 9:14 ` [PATCH 69/78] wlcore: use proper values for supported local rates Arik Nemtsov
2012-05-10 9:14 ` [PATCH 70/78] wl18xx: add module parameter to force SISO 20MHz Arik Nemtsov
2012-05-10 9:14 ` [PATCH 71/78] wl18xx: add power limit reference value to mac_and_phy settings Arik Nemtsov
2012-05-10 9:14 ` [PATCH 72/78] wl18xx: export low/high band component values as module params Arik Nemtsov
2012-05-10 9:14 ` [PATCH 73/78] wl18xx: export pwr_limit_reference_11_abg value as a module parameter Arik Nemtsov
2012-05-10 9:14 ` [PATCH 74/78] wlcore/wl12xx/wl18xx: move lower driver debugfs to a subdir Arik Nemtsov
2012-05-10 9:14 ` [PATCH 75/78] wlcore: increase aggregation buffer size by one page Arik Nemtsov
2012-05-10 9:14 ` [PATCH 76/78] wl18xx: increase tx_ba_win_size to 64 Arik Nemtsov
2012-05-10 9:14 ` [PATCH 77/78] wl18xx: use new fw stats structures Arik Nemtsov
2012-05-10 9:14 ` [PATCH 78/78] wl18xx: change default tcp_checksum to false Arik Nemtsov
2012-05-10 9:50 ` [PATCH 00/78] 18xx chip support Kalle Valo
2012-05-10 10:11 ` Arik Nemtsov
2012-05-10 10:15 ` Kalle Valo
2012-05-10 10:25 ` Arik Nemtsov
2012-05-11 5:57 ` Luciano Coelho
2012-05-11 9:03 ` Kalle Valo
2012-06-05 14:04 ` Luciano Coelho
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1336641263-5761-39-git-send-email-arik@wizery.com \
--to=arik@wizery.com \
--cc=coelho@ti.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).