From: Arik Nemtsov <arik@wizery.com>
To: <linux-wireless@vger.kernel.org>
Cc: Luciano Coelho <coelho@ti.com>, Arik Nemtsov <arik@wizery.com>
Subject: [PATCH 49/78] wlcore/wl12xx/18xx: split fw_status struct into two
Date: Thu, 10 May 2012 12:13:54 +0300 [thread overview]
Message-ID: <1336641263-5761-50-git-send-email-arik@wizery.com> (raw)
In-Reply-To: <1336641263-5761-1-git-send-email-arik@wizery.com>
The number of RX packet descriptors may vary from chip to chip and
in different firmware versions. Unfortunately, the array that
contains the actual descriptors is in the middle of the fw_status
structure. To manage this, we split the struct into two so we can
calculate the offset of what comes after the array and access the last
elements more easily.
[Changed the STATUS_LEN macro to be placement agnostic - Arik]
Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
---
drivers/net/wireless/ti/wl12xx/main.c | 4 +-
drivers/net/wireless/ti/wl18xx/main.c | 1 +
drivers/net/wireless/ti/wl18xx/tx.c | 2 +-
drivers/net/wireless/ti/wlcore/main.c | 64 ++++++++++++++++-------------
drivers/net/wireless/ti/wlcore/rx.c | 10 ++---
drivers/net/wireless/ti/wlcore/rx.h | 4 +-
drivers/net/wireless/ti/wlcore/wlcore.h | 5 ++-
drivers/net/wireless/ti/wlcore/wlcore_i.h | 18 ++++++--
8 files changed, 66 insertions(+), 42 deletions(-)
diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c
index 1d097c1..82e0c6a 100644
--- a/drivers/net/wireless/ti/wl12xx/main.c
+++ b/drivers/net/wireless/ti/wl12xx/main.c
@@ -1156,7 +1156,8 @@ static u32 wl12xx_get_rx_packet_len(struct wl1271 *wl, void *rx_data,
static void wl12xx_tx_delayed_compl(struct wl1271 *wl)
{
- if (wl->fw_status->tx_results_counter == (wl->tx_results_count & 0xff))
+ if (wl->fw_status_1->tx_results_counter ==
+ (wl->tx_results_count & 0xff))
return;
wl1271_tx_complete(wl);
@@ -1414,6 +1415,7 @@ static int __devinit wl12xx_probe(struct platform_device *pdev)
wl->ptable = wl12xx_ptable;
wl->rtable = wl12xx_rtable;
wl->num_tx_desc = 16;
+ wl->num_rx_desc = 8;
wl->normal_tx_spare = WL12XX_TX_HW_BLOCK_SPARE_DEFAULT;
wl->gem_tx_spare = WL12XX_TX_HW_BLOCK_GEM_SPARE;
wl->band_rate_to_idx = wl12xx_band_rate_to_idx;
diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c
index b76b6ac..df407be 100644
--- a/drivers/net/wireless/ti/wl18xx/main.c
+++ b/drivers/net/wireless/ti/wl18xx/main.c
@@ -1041,6 +1041,7 @@ int __devinit wl18xx_probe(struct platform_device *pdev)
wl->ptable = wl18xx_ptable;
wl->rtable = wl18xx_rtable;
wl->num_tx_desc = 32;
+ wl->num_rx_desc = 16;
wl->normal_tx_spare = WL18XX_TX_HW_BLOCK_SPARE;
wl->gem_tx_spare = WL18XX_TX_HW_GEM_BLOCK_SPARE;
wl->band_rate_to_idx = wl18xx_band_rate_to_idx;
diff --git a/drivers/net/wireless/ti/wl18xx/tx.c b/drivers/net/wireless/ti/wl18xx/tx.c
index 4e12f56..4de00b9 100644
--- a/drivers/net/wireless/ti/wl18xx/tx.c
+++ b/drivers/net/wireless/ti/wl18xx/tx.c
@@ -94,7 +94,7 @@ static void wl18xx_tx_complete_packet(struct wl1271 *wl, u8 tx_stat_byte)
void wl18xx_tx_immediate_complete(struct wl1271 *wl)
{
struct wl18xx_fw_status_priv *status_priv =
- (struct wl18xx_fw_status_priv *)wl->fw_status->priv;
+ (struct wl18xx_fw_status_priv *)wl->fw_status_2->priv;
struct wl18xx_priv *priv = wl->priv;
u8 i;
diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index 3aadf74..3e3dce9 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -347,7 +347,7 @@ static void wl12xx_irq_ps_regulate_link(struct wl1271 *wl,
static void wl12xx_irq_update_links_status(struct wl1271 *wl,
struct wl12xx_vif *wlvif,
- struct wl_fw_status *status)
+ struct wl_fw_status_2 *status)
{
struct wl1271_link *lnk;
u32 cur_fw_ps_map;
@@ -379,7 +379,8 @@ static void wl12xx_irq_update_links_status(struct wl1271 *wl,
}
static void wl12xx_fw_status(struct wl1271 *wl,
- struct wl_fw_status *status)
+ struct wl_fw_status_1 *status_1,
+ struct wl_fw_status_2 *status_2)
{
struct wl12xx_vif *wlvif;
struct timespec ts;
@@ -388,37 +389,38 @@ static void wl12xx_fw_status(struct wl1271 *wl,
int i;
size_t status_len;
- status_len = sizeof(*status) + wl->fw_status_priv_len;
+ status_len = WLCORE_FW_STATUS_1_LEN(wl->num_rx_desc) +
+ sizeof(*status_2) + wl->fw_status_priv_len;
- wlcore_raw_read_data(wl, REG_RAW_FW_STATUS_ADDR, status,
+ wlcore_raw_read_data(wl, REG_RAW_FW_STATUS_ADDR, status_1,
status_len, false);
wl1271_debug(DEBUG_IRQ, "intr: 0x%x (fw_rx_counter = %d, "
"drv_rx_counter = %d, tx_results_counter = %d)",
- status->intr,
- status->fw_rx_counter,
- status->drv_rx_counter,
- status->tx_results_counter);
+ status_1->intr,
+ status_1->fw_rx_counter,
+ status_1->drv_rx_counter,
+ status_1->tx_results_counter);
for (i = 0; i < NUM_TX_QUEUES; i++) {
/* prevent wrap-around in freed-packets counter */
wl->tx_allocated_pkts[i] -=
- (status->counters.tx_released_pkts[i] -
+ (status_2->counters.tx_released_pkts[i] -
wl->tx_pkts_freed[i]) & 0xff;
- wl->tx_pkts_freed[i] = status->counters.tx_released_pkts[i];
+ wl->tx_pkts_freed[i] = status_2->counters.tx_released_pkts[i];
}
/* prevent wrap-around in total blocks counter */
if (likely(wl->tx_blocks_freed <=
- le32_to_cpu(status->total_released_blks)))
- freed_blocks = le32_to_cpu(status->total_released_blks) -
+ le32_to_cpu(status_2->total_released_blks)))
+ freed_blocks = le32_to_cpu(status_2->total_released_blks) -
wl->tx_blocks_freed;
else
freed_blocks = 0x100000000LL - wl->tx_blocks_freed +
- le32_to_cpu(status->total_released_blks);
+ le32_to_cpu(status_2->total_released_blks);
- wl->tx_blocks_freed = le32_to_cpu(status->total_released_blks);
+ wl->tx_blocks_freed = le32_to_cpu(status_2->total_released_blks);
wl->tx_allocated_blocks -= freed_blocks;
@@ -434,7 +436,7 @@ static void wl12xx_fw_status(struct wl1271 *wl,
cancel_delayed_work(&wl->tx_watchdog_work);
}
- avail = le32_to_cpu(status->tx_total) - wl->tx_allocated_blocks;
+ avail = le32_to_cpu(status_2->tx_total) - wl->tx_allocated_blocks;
/*
* The FW might change the total number of TX memblocks before
@@ -453,13 +455,13 @@ static void wl12xx_fw_status(struct wl1271 *wl,
/* for AP update num of allocated TX blocks per link and ps status */
wl12xx_for_each_wlvif_ap(wl, wlvif) {
- wl12xx_irq_update_links_status(wl, wlvif, status);
+ wl12xx_irq_update_links_status(wl, wlvif, status_2);
}
/* update the host-chipset time offset */
getnstimeofday(&ts);
wl->time_offset = (timespec_to_ns(&ts) >> 10) -
- (s64)le32_to_cpu(status->fw_localtime);
+ (s64)le32_to_cpu(status_2->fw_localtime);
}
static void wl1271_flush_deferred_work(struct wl1271 *wl)
@@ -528,11 +530,11 @@ static irqreturn_t wl1271_irq(int irq, void *cookie)
clear_bit(WL1271_FLAG_IRQ_RUNNING, &wl->flags);
smp_mb__after_clear_bit();
- wl12xx_fw_status(wl, wl->fw_status);
+ wl12xx_fw_status(wl, wl->fw_status_1, wl->fw_status_2);
wlcore_hw_tx_immediate_compl(wl);
- intr = le32_to_cpu(wl->fw_status->intr);
+ intr = le32_to_cpu(wl->fw_status_1->intr);
intr &= WL1271_INTR_MASK;
if (!intr) {
done = true;
@@ -551,7 +553,7 @@ static irqreturn_t wl1271_irq(int irq, void *cookie)
if (likely(intr & WL1271_ACX_INTR_DATA)) {
wl1271_debug(DEBUG_IRQ, "WL1271_ACX_INTR_DATA");
- wl12xx_rx(wl, wl->fw_status);
+ wl12xx_rx(wl, wl->fw_status_1);
/* Check if any tx blocks were freed */
spin_lock_irqsave(&wl->wl_lock, flags);
@@ -786,8 +788,8 @@ static void wl12xx_read_fwlog_panic(struct wl1271 *wl)
wl12xx_cmd_stop_fwlog(wl);
/* Read the first memory block address */
- wl12xx_fw_status(wl, wl->fw_status);
- first_addr = le32_to_cpu(wl->fw_status->log_start_addr);
+ wl12xx_fw_status(wl, wl->fw_status_1, wl->fw_status_2);
+ first_addr = le32_to_cpu(wl->fw_status_2->log_start_addr);
if (!first_addr)
goto out;
@@ -901,13 +903,18 @@ static void wl1271_fw_wakeup(struct wl1271 *wl)
static int wl1271_setup(struct wl1271 *wl)
{
- wl->fw_status = kmalloc(sizeof(*wl->fw_status), GFP_KERNEL);
- if (!wl->fw_status)
+ wl->fw_status_1 = kmalloc(WLCORE_FW_STATUS_1_LEN(wl->num_rx_desc) +
+ sizeof(*wl->fw_status_2), GFP_KERNEL);
+ if (!wl->fw_status_1)
return -ENOMEM;
+ wl->fw_status_2 = (struct wl_fw_status_2 *)
+ (((u8 *) wl->fw_status_1) +
+ WLCORE_FW_STATUS_1_LEN(wl->num_rx_desc));
+
wl->tx_res_if = kmalloc(sizeof(*wl->tx_res_if), GFP_KERNEL);
if (!wl->tx_res_if) {
- kfree(wl->fw_status);
+ kfree(wl->fw_status_1);
return -ENOMEM;
}
@@ -1745,8 +1752,9 @@ static void wl1271_op_stop(struct ieee80211_hw *hw)
wl1271_debugfs_reset(wl);
- kfree(wl->fw_status);
- wl->fw_status = NULL;
+ kfree(wl->fw_status_1);
+ wl->fw_status_1 = NULL;
+ wl->fw_status_2 = NULL;
kfree(wl->tx_res_if);
wl->tx_res_if = NULL;
kfree(wl->target_mem_map);
@@ -5180,7 +5188,7 @@ int wlcore_free_hw(struct wl1271 *wl)
kfree(wl->nvs);
wl->nvs = NULL;
- kfree(wl->fw_status);
+ kfree(wl->fw_status_1);
kfree(wl->tx_res_if);
destroy_workqueue(wl->freezable_wq);
diff --git a/drivers/net/wireless/ti/wlcore/rx.c b/drivers/net/wireless/ti/wlcore/rx.c
index e2c5df6..406eed2 100644
--- a/drivers/net/wireless/ti/wlcore/rx.c
+++ b/drivers/net/wireless/ti/wlcore/rx.c
@@ -200,12 +200,12 @@ static int wl1271_rx_handle_data(struct wl1271 *wl, u8 *data, u32 length,
return is_data;
}
-void wl12xx_rx(struct wl1271 *wl, struct wl_fw_status *status)
+void wl12xx_rx(struct wl1271 *wl, struct wl_fw_status_1 *status)
{
unsigned long active_hlids[BITS_TO_LONGS(WL12XX_MAX_LINKS)] = {0};
u32 buf_size;
- u32 fw_rx_counter = status->fw_rx_counter & NUM_RX_PKT_DESC_MOD_MASK;
- u32 drv_rx_counter = wl->rx_counter & NUM_RX_PKT_DESC_MOD_MASK;
+ u32 fw_rx_counter = status->fw_rx_counter % wl->num_rx_desc;
+ u32 drv_rx_counter = wl->rx_counter % wl->num_rx_desc;
u32 rx_counter;
u32 pkt_len, align_pkt_len;
u32 pkt_offset, des;
@@ -224,7 +224,7 @@ void wl12xx_rx(struct wl1271 *wl, struct wl_fw_status *status)
break;
buf_size += align_pkt_len;
rx_counter++;
- rx_counter &= NUM_RX_PKT_DESC_MOD_MASK;
+ rx_counter %= wl->num_rx_desc;
}
if (buf_size == 0) {
@@ -264,7 +264,7 @@ void wl12xx_rx(struct wl1271 *wl, struct wl_fw_status *status)
wl->rx_counter++;
drv_rx_counter++;
- drv_rx_counter &= NUM_RX_PKT_DESC_MOD_MASK;
+ drv_rx_counter %= wl->num_rx_desc;
pkt_offset += wlcore_rx_get_align_buf_size(wl, pkt_len);
}
}
diff --git a/drivers/net/wireless/ti/wlcore/rx.h b/drivers/net/wireless/ti/wlcore/rx.h
index 277936e..9be7801 100644
--- a/drivers/net/wireless/ti/wlcore/rx.h
+++ b/drivers/net/wireless/ti/wlcore/rx.h
@@ -38,8 +38,6 @@
#define RX_DESC_PACKETID_SHIFT 11
#define RX_MAX_PACKET_ID 3
-#define NUM_RX_PKT_DESC_MOD_MASK 7
-
#define RX_DESC_VALID_FCS 0x0001
#define RX_DESC_MATCH_RXADDR1 0x0002
#define RX_DESC_MCAST 0x0004
@@ -139,7 +137,7 @@ struct wl1271_rx_descriptor {
u8 reserved;
} __packed;
-void wl12xx_rx(struct wl1271 *wl, struct wl_fw_status *status);
+void wl12xx_rx(struct wl1271 *wl, struct wl_fw_status_1 *status);
u8 wl1271_rate_to_idx(int rate, enum ieee80211_band band);
int wl1271_rx_filter_enable(struct wl1271 *wl,
int index, bool enable,
diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h
index 1fc3c77..9ca3829 100644
--- a/drivers/net/wireless/ti/wlcore/wlcore.h
+++ b/drivers/net/wireless/ti/wlcore/wlcore.h
@@ -269,7 +269,8 @@ struct wl1271 {
u32 buffer_cmd;
u32 buffer_busyword[WL1271_BUSY_WORD_CNT];
- struct wl_fw_status *fw_status;
+ struct wl_fw_status_1 *fw_status_1;
+ struct wl_fw_status_2 *fw_status_2;
struct wl1271_tx_hw_res_if *tx_res_if;
/* Current chipset configuration */
@@ -337,6 +338,8 @@ struct wl1271 {
/* number of TX descriptors the HW supports. */
u32 num_tx_desc;
+ /* number of RX descriptors the HW supports. */
+ u32 num_rx_desc;
/* spare Tx blocks for normal/GEM operating modes */
u32 normal_tx_spare;
diff --git a/drivers/net/wireless/ti/wlcore/wlcore_i.h b/drivers/net/wireless/ti/wlcore/wlcore_i.h
index 53263a9..0422753 100644
--- a/drivers/net/wireless/ti/wlcore/wlcore_i.h
+++ b/drivers/net/wireless/ti/wlcore/wlcore_i.h
@@ -141,7 +141,6 @@ struct wl1271_stats {
};
#define NUM_TX_QUEUES 4
-#define NUM_RX_PKT_DESC 8
#define AP_MAX_STATIONS 8
@@ -159,13 +158,26 @@ struct wl_fw_packet_counters {
} __packed;
/* FW status registers */
-struct wl_fw_status {
+struct wl_fw_status_1 {
__le32 intr;
u8 fw_rx_counter;
u8 drv_rx_counter;
u8 reserved;
u8 tx_results_counter;
- __le32 rx_pkt_descs[NUM_RX_PKT_DESC];
+ __le32 rx_pkt_descs[0];
+} __packed;
+
+/*
+ * Each HW arch has a different number of Rx descriptors.
+ * The length of the status depends on it, since it holds an array
+ * of descriptors.
+ */
+#define WLCORE_FW_STATUS_1_LEN(num_rx_desc) \
+ (sizeof(struct wl_fw_status_1) + \
+ (sizeof(((struct wl_fw_status_1 *)0)->rx_pkt_descs[0])) * \
+ num_rx_desc)
+
+struct wl_fw_status_2 {
__le32 fw_localtime;
/*
--
1.7.9.5
next prev parent reply other threads:[~2012-05-10 9:16 UTC|newest]
Thread overview: 86+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-10 9:13 [PATCH 00/78] 18xx chip support Arik Nemtsov
2012-05-10 9:13 ` [PATCH 01/78] wl18xx: add new module Arik Nemtsov
2012-05-10 9:13 ` [PATCH 02/78] wlcore_sdio/wl18xx: use SDIO revision number to identify wl18xx chips Arik Nemtsov
2012-05-10 9:13 ` [PATCH 03/78] wl18xx: add empty operations struct Arik Nemtsov
2012-05-10 9:13 ` [PATCH 04/78] wl18xx: add partition table Arik Nemtsov
2012-05-10 9:13 ` [PATCH 05/78] wl18xx: add register table Arik Nemtsov
2012-05-10 9:13 ` [PATCH 06/78] wl18xx: add identify chip operation Arik Nemtsov
2012-05-10 9:13 ` [PATCH 07/78] wl18xx: add some boot operations and hw-specific configurations Arik Nemtsov
2012-05-10 9:13 ` [PATCH 08/78] wl18xx: add trigger command and ack event operations Arik Nemtsov
2012-05-10 9:13 ` [PATCH 09/78] wl18xx: create per-chip-family private storage Arik Nemtsov
2012-05-10 9:13 ` [PATCH 10/78] wl18xx: set the number of Tx descriptors Arik Nemtsov
2012-05-10 9:13 ` [PATCH 11/78] wl18xx: set normal/GEM Tx spare block counts Arik Nemtsov
2012-05-10 9:13 ` [PATCH 12/78] wl18xx: implement hw op for calculating hw block count per packet Arik Nemtsov
2012-05-10 9:13 ` [PATCH 13/78] wl18xx: implement hw op for setting blocks in hw_tx_desc Arik Nemtsov
2012-05-10 9:13 ` [PATCH 14/78] wl18xx: implement hw op for setting frame length in tx_hw_desc Arik Nemtsov
2012-05-10 9:13 ` [PATCH 15/78] wl18xx: define HW-rate translation elements/tables Arik Nemtsov
2012-05-10 9:13 ` [PATCH 16/78] wl18xx: add fw_status private data Arik Nemtsov
2012-05-10 9:13 ` [PATCH 17/78] wl18xx: set Rx block-size alignment quirk Arik Nemtsov
2012-05-10 9:13 ` [PATCH 18/78] wl18xx: implement hw op for getting rx buffer data alignment Arik Nemtsov
2012-05-10 9:13 ` [PATCH 19/78] wl18xx: implement hw op for getting rx packet data length Arik Nemtsov
2012-05-10 9:13 ` [PATCH 20/78] wl18xx: implement immediate Tx completion Arik Nemtsov
2012-05-10 9:13 ` [PATCH 21/78] wl18xx: add hw_init operation Arik Nemtsov
2012-05-10 9:13 ` [PATCH 22/78] wlcore/wl18xx: add hw op for setting Tx HW checksum Arik Nemtsov
2012-05-10 9:13 ` [PATCH 23/78] wlcore/wl18xx: add hw op for Rx " Arik Nemtsov
2012-05-10 9:13 ` [PATCH 24/78] wl18xx: add runtime configuration parameters Arik Nemtsov
2012-05-10 9:13 ` [PATCH 25/78] wlcore: track current channel type per vif Arik Nemtsov
2012-05-10 9:13 ` [PATCH 26/78] wl18xx: send channel type to FW on role start Arik Nemtsov
2012-05-10 9:13 ` [PATCH 27/78] wl18xx: ipmlement ap_rate_mask hw op Arik Nemtsov
2012-05-10 9:13 ` [PATCH 28/78] wlcore: support peer MIMO rates Arik Nemtsov
2012-05-10 9:13 ` [PATCH 29/78] wlcore/wl18xx: enable MIMO/wide-chan rates in AP-mode rate config Arik Nemtsov
2012-05-10 9:13 ` [PATCH 30/78] wl18xx: set HT capabilities Arik Nemtsov
2012-05-10 9:13 ` [PATCH 31/78] wl18xx: add module param for overriding HT caps Arik Nemtsov
2012-05-10 9:13 ` [PATCH 32/78] wl18xx: add board type module argument Arik Nemtsov
2012-05-10 9:13 ` [PATCH 33/78] wl18xx: translate and write the board type to SCR_PAD2 Arik Nemtsov
2012-05-10 9:13 ` [PATCH 34/78] wl18xx: read FW pc on recovery Arik Nemtsov
2012-05-10 9:13 ` [PATCH 35/78] wl18xx: disable FW log functionality Arik Nemtsov
2012-05-10 9:13 ` [PATCH 36/78] wl18xx: read clock frequency and do top init accordingly Arik Nemtsov
2012-05-10 9:13 ` [PATCH 37/78] wlcore: rename wl12xx.h to wlcore_i.h Arik Nemtsov
2012-05-10 9:13 ` [PATCH 38/78] wlcore/wl12xx: move ref_clock and tcxo_clock elements to wl12xx Arik Nemtsov
2012-05-10 9:13 ` [PATCH 39/78] wl18xx: implement hw op to read PG version Arik Nemtsov
2012-05-10 9:13 ` [PATCH 40/78] wlcore/wl12xx: move rx_mem_pool_addr element to wl12xx Arik Nemtsov
2012-05-10 9:13 ` [PATCH 41/78] wl18xx: init Tx-released index to 0 on HW init Arik Nemtsov
2012-05-10 9:13 ` [PATCH 42/78] wl18xx: don't upload NVS to FW Arik Nemtsov
2012-05-10 9:13 ` [PATCH 43/78] wl18xx: change board type enum according to new FW Arik Nemtsov
2012-05-10 9:13 ` [PATCH 44/78] wlcore/wl12xx: add plt_init op and move the code to wl12xx Arik Nemtsov
2012-05-10 9:13 ` [PATCH 45/78] wl18xx: add plt_init operation Arik Nemtsov
2012-05-10 9:13 ` [PATCH 46/78] wl18xx: change the low_band_component_type for HDK boards Arik Nemtsov
2012-05-10 9:13 ` [PATCH 47/78] wl18xx: add number of antennas and dc2dc type as module params Arik Nemtsov
2012-05-10 9:13 ` [PATCH 48/78] wl18xx: add module parameter to disable TCP checksum Arik Nemtsov
2012-05-10 9:13 ` Arik Nemtsov [this message]
2012-05-10 9:13 ` [PATCH 50/78] wl18xx: derive the MAC address from the BD_ADDR in fuse ROM Arik Nemtsov
2012-05-10 9:13 ` [PATCH 51/78] wl18xx: add a module parameter to control 11a support Arik Nemtsov
2012-05-10 9:13 ` [PATCH 52/78] wlcore: add module parameter to dump SDIO reads and writes Arik Nemtsov
2012-05-10 9:13 ` [PATCH 53/78] wl18xx: copy the default configuration before checking the board_type Arik Nemtsov
2012-05-10 9:13 ` [PATCH 54/78] wl18xx: changed default board_type to HDK Arik Nemtsov
2012-05-10 9:14 ` [PATCH 55/78] wlcore: add space for private area when allocating fw_status Arik Nemtsov
2012-05-10 9:14 ` [PATCH 56/78] wl18xx: change low_band_component_type value for COM8 Arik Nemtsov
2012-05-10 9:14 ` [PATCH 57/78] wlcore: reorder identify_chip and get_hw_info Arik Nemtsov
2012-05-10 9:14 ` [PATCH 58/78] wl18xx: disable MCS_13 for wl18xx PG 1.0 Arik Nemtsov
2012-05-10 9:14 ` [PATCH 59/78] wlcore: update beacon and probe_resp templates when rates change Arik Nemtsov
2012-05-10 9:14 ` [PATCH 60/78] wlcore: use all AP basic rates as default Arik Nemtsov
2012-05-10 9:14 ` [PATCH 61/78] wlcore: abstract debugfs fw_stats to be handled by the lower drivers Arik Nemtsov
2012-05-10 9:14 ` [PATCH 62/78] wlcore: add debugfs macro to help print fw statistics arrays Arik Nemtsov
2012-05-10 9:14 ` [PATCH 63/78] wl12xx: implement fw status debugfs entries Arik Nemtsov
2012-05-10 9:14 ` [PATCH 64/78] wl18xx: " Arik Nemtsov
2012-05-10 9:14 ` [PATCH 65/78] wlcore: create private static_data area and add operation to parse it Arik Nemtsov
2012-05-10 9:14 ` [PATCH 66/78] wl18xx: print the PHY firmware version from the private static data Arik Nemtsov
2012-05-10 9:14 ` [PATCH 67/78] wlcore: print the interrupt status when recovery is triggered Arik Nemtsov
2012-05-10 9:14 ` [PATCH 68/78] wl18xx: don't use MIMO when ht_mode is set to wide Arik Nemtsov
2012-05-10 9:14 ` [PATCH 69/78] wlcore: use proper values for supported local rates Arik Nemtsov
2012-05-10 9:14 ` [PATCH 70/78] wl18xx: add module parameter to force SISO 20MHz Arik Nemtsov
2012-05-10 9:14 ` [PATCH 71/78] wl18xx: add power limit reference value to mac_and_phy settings Arik Nemtsov
2012-05-10 9:14 ` [PATCH 72/78] wl18xx: export low/high band component values as module params Arik Nemtsov
2012-05-10 9:14 ` [PATCH 73/78] wl18xx: export pwr_limit_reference_11_abg value as a module parameter Arik Nemtsov
2012-05-10 9:14 ` [PATCH 74/78] wlcore/wl12xx/wl18xx: move lower driver debugfs to a subdir Arik Nemtsov
2012-05-10 9:14 ` [PATCH 75/78] wlcore: increase aggregation buffer size by one page Arik Nemtsov
2012-05-10 9:14 ` [PATCH 76/78] wl18xx: increase tx_ba_win_size to 64 Arik Nemtsov
2012-05-10 9:14 ` [PATCH 77/78] wl18xx: use new fw stats structures Arik Nemtsov
2012-05-10 9:14 ` [PATCH 78/78] wl18xx: change default tcp_checksum to false Arik Nemtsov
2012-05-10 9:50 ` [PATCH 00/78] 18xx chip support Kalle Valo
2012-05-10 10:11 ` Arik Nemtsov
2012-05-10 10:15 ` Kalle Valo
2012-05-10 10:25 ` Arik Nemtsov
2012-05-11 5:57 ` Luciano Coelho
2012-05-11 9:03 ` Kalle Valo
2012-06-05 14:04 ` Luciano Coelho
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1336641263-5761-50-git-send-email-arik@wizery.com \
--to=arik@wizery.com \
--cc=coelho@ti.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).