From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail-wg0-f44.google.com ([74.125.82.44]:61669 "EHLO mail-wg0-f44.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1758487Ab2EJJQe (ORCPT ); Thu, 10 May 2012 05:16:34 -0400 Received: by mail-wg0-f44.google.com with SMTP id dr13so1110716wgb.1 for ; Thu, 10 May 2012 02:16:33 -0700 (PDT) From: Arik Nemtsov To: Cc: Luciano Coelho , Arik Nemtsov Subject: [PATCH 56/78] wl18xx: change low_band_component_type value for COM8 Date: Thu, 10 May 2012 12:14:01 +0300 Message-Id: <1336641263-5761-57-git-send-email-arik@wizery.com> (sfid-20120510_111905_025605_83A571EE) In-Reply-To: <1336641263-5761-1-git-send-email-arik@wizery.com> References: <1336641263-5761-1-git-send-email-arik@wizery.com> Sender: linux-wireless-owner@vger.kernel.org List-ID: From: Luciano Coelho Like HDK, COM8 uses 0x06 for the low_band_component_type as well. Hardcode the value for COM8 until this configuration can be done in the external configuration binary (to be implemented). Signed-off-by: Luciano Coelho Signed-off-by: Arik Nemtsov --- drivers/net/wireless/ti/wl18xx/main.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index aa227a1..6047a6d 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -1086,6 +1086,8 @@ int __devinit wl18xx_probe(struct platform_device *pdev) priv->board_type = BOARD_TYPE_EVB_18XX; } else if (!strcmp(board_type_param, "com8")) { priv->board_type = BOARD_TYPE_COM8_18XX; + /* HACK! Just for now we hardcode COM8 to 0x06 */ + priv->conf.phy.low_band_component_type = 0x06; } else { wl1271_error("invalid board type '%s'", board_type_param); wlcore_free_hw(wl); -- 1.7.9.5