From: Arik Nemtsov <arik@wizery.com>
To: <linux-wireless@vger.kernel.org>
Cc: Luciano Coelho <coelho@ti.com>, Arik Nemtsov <arik@wizery.com>
Subject: [PATCH 74/78] wlcore/wl12xx/wl18xx: move lower driver debugfs to a subdir
Date: Thu, 10 May 2012 12:14:19 +0300 [thread overview]
Message-ID: <1336641263-5761-75-git-send-email-arik@wizery.com> (raw)
In-Reply-To: <1336641263-5761-1-git-send-email-arik@wizery.com>
From: Luciano Coelho <coelho@ti.com>
Instead of adding more files from the lower drivers into the same
directory in debugfs as wlcore, we now add a subdirectory for the
lower driver. This makes things a bit easier, because we can quickly
see where the debugfs entry is implemented and what is specific to the
lower driver.
Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
---
drivers/net/wireless/ti/wl12xx/debugfs.c | 10 ++++++++--
drivers/net/wireless/ti/wl12xx/main.c | 7 +------
drivers/net/wireless/ti/wl18xx/debugfs.c | 10 ++++++++--
drivers/net/wireless/ti/wl18xx/main.c | 7 +------
4 files changed, 18 insertions(+), 16 deletions(-)
diff --git a/drivers/net/wireless/ti/wl12xx/debugfs.c b/drivers/net/wireless/ti/wl12xx/debugfs.c
index 311703d..0521cbf 100644
--- a/drivers/net/wireless/ti/wl12xx/debugfs.c
+++ b/drivers/net/wireless/ti/wl12xx/debugfs.c
@@ -126,9 +126,15 @@ int wl12xx_debugfs_add_files(struct wl1271 *wl,
struct dentry *rootdir)
{
int ret = 0;
- struct dentry *entry, *stats;
+ struct dentry *entry, *stats, *moddir;
- stats = debugfs_create_dir("wl12xx_fw_stats", rootdir);
+ moddir = debugfs_create_dir(KBUILD_MODNAME, rootdir);
+ if (!moddir || IS_ERR(moddir)) {
+ entry = moddir;
+ goto err;
+ }
+
+ stats = debugfs_create_dir("fw_stats", moddir);
if (!stats || IS_ERR(stats)) {
entry = stats;
goto err;
diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c
index 2ac8407..ba5afa4 100644
--- a/drivers/net/wireless/ti/wl12xx/main.c
+++ b/drivers/net/wireless/ti/wl12xx/main.c
@@ -1360,11 +1360,6 @@ out:
return ret;
}
-static int wl12xx_debugfs_init(struct wl1271 *wl, struct dentry *rootdir)
-{
- return wl12xx_debugfs_add_files(wl, rootdir);
-}
-
static struct wlcore_ops wl12xx_ops = {
.identify_chip = wl12xx_identify_chip,
.identify_fw = wl12xx_identify_fw,
@@ -1387,7 +1382,7 @@ static struct wlcore_ops wl12xx_ops = {
.set_tx_desc_csum = wl12xx_set_tx_desc_csum,
.set_rx_csum = NULL,
.ap_get_mimo_wide_rate_mask = NULL,
- .debugfs_init = wl12xx_debugfs_init,
+ .debugfs_init = wl12xx_debugfs_add_files,
};
static struct ieee80211_sta_ht_cap wl12xx_ht_cap = {
diff --git a/drivers/net/wireless/ti/wl18xx/debugfs.c b/drivers/net/wireless/ti/wl18xx/debugfs.c
index 8354dfc..f4127bf 100644
--- a/drivers/net/wireless/ti/wl18xx/debugfs.c
+++ b/drivers/net/wireless/ti/wl18xx/debugfs.c
@@ -181,9 +181,15 @@ int wl18xx_debugfs_add_files(struct wl1271 *wl,
struct dentry *rootdir)
{
int ret = 0;
- struct dentry *entry, *stats;
+ struct dentry *entry, *stats, *moddir;
- stats = debugfs_create_dir("wl18xx_fw_stats", rootdir);
+ moddir = debugfs_create_dir(KBUILD_MODNAME, rootdir);
+ if (!moddir || IS_ERR(moddir)) {
+ entry = moddir;
+ goto err;
+ }
+
+ stats = debugfs_create_dir("fw_stats", moddir);
if (!stats || IS_ERR(stats)) {
entry = stats;
goto err;
diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c
index 524f44c..27cd9b8 100644
--- a/drivers/net/wireless/ti/wl18xx/main.c
+++ b/drivers/net/wireless/ti/wl18xx/main.c
@@ -1022,11 +1022,6 @@ static void wl18xx_get_mac(struct wl1271 *wl)
wlcore_set_partition(wl, &wl->ptable[PART_DOWN]);
}
-static int wl18xx_debugfs_init(struct wl1271 *wl, struct dentry *rootdir)
-{
- return wl18xx_debugfs_add_files(wl, rootdir);
-}
-
static int wl18xx_handle_static_data(struct wl1271 *wl,
struct wl1271_static_data *static_data)
{
@@ -1058,7 +1053,7 @@ static struct wlcore_ops wl18xx_ops = {
.sta_get_ap_rate_mask = wl18xx_sta_get_ap_rate_mask,
.ap_get_mimo_wide_rate_mask = wl18xx_ap_get_mimo_wide_rate_mask,
.get_mac = wl18xx_get_mac,
- .debugfs_init = wl18xx_debugfs_init,
+ .debugfs_init = wl18xx_debugfs_add_files,
.handle_static_data = wl18xx_handle_static_data,
};
--
1.7.9.5
next prev parent reply other threads:[~2012-05-10 9:17 UTC|newest]
Thread overview: 86+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-10 9:13 [PATCH 00/78] 18xx chip support Arik Nemtsov
2012-05-10 9:13 ` [PATCH 01/78] wl18xx: add new module Arik Nemtsov
2012-05-10 9:13 ` [PATCH 02/78] wlcore_sdio/wl18xx: use SDIO revision number to identify wl18xx chips Arik Nemtsov
2012-05-10 9:13 ` [PATCH 03/78] wl18xx: add empty operations struct Arik Nemtsov
2012-05-10 9:13 ` [PATCH 04/78] wl18xx: add partition table Arik Nemtsov
2012-05-10 9:13 ` [PATCH 05/78] wl18xx: add register table Arik Nemtsov
2012-05-10 9:13 ` [PATCH 06/78] wl18xx: add identify chip operation Arik Nemtsov
2012-05-10 9:13 ` [PATCH 07/78] wl18xx: add some boot operations and hw-specific configurations Arik Nemtsov
2012-05-10 9:13 ` [PATCH 08/78] wl18xx: add trigger command and ack event operations Arik Nemtsov
2012-05-10 9:13 ` [PATCH 09/78] wl18xx: create per-chip-family private storage Arik Nemtsov
2012-05-10 9:13 ` [PATCH 10/78] wl18xx: set the number of Tx descriptors Arik Nemtsov
2012-05-10 9:13 ` [PATCH 11/78] wl18xx: set normal/GEM Tx spare block counts Arik Nemtsov
2012-05-10 9:13 ` [PATCH 12/78] wl18xx: implement hw op for calculating hw block count per packet Arik Nemtsov
2012-05-10 9:13 ` [PATCH 13/78] wl18xx: implement hw op for setting blocks in hw_tx_desc Arik Nemtsov
2012-05-10 9:13 ` [PATCH 14/78] wl18xx: implement hw op for setting frame length in tx_hw_desc Arik Nemtsov
2012-05-10 9:13 ` [PATCH 15/78] wl18xx: define HW-rate translation elements/tables Arik Nemtsov
2012-05-10 9:13 ` [PATCH 16/78] wl18xx: add fw_status private data Arik Nemtsov
2012-05-10 9:13 ` [PATCH 17/78] wl18xx: set Rx block-size alignment quirk Arik Nemtsov
2012-05-10 9:13 ` [PATCH 18/78] wl18xx: implement hw op for getting rx buffer data alignment Arik Nemtsov
2012-05-10 9:13 ` [PATCH 19/78] wl18xx: implement hw op for getting rx packet data length Arik Nemtsov
2012-05-10 9:13 ` [PATCH 20/78] wl18xx: implement immediate Tx completion Arik Nemtsov
2012-05-10 9:13 ` [PATCH 21/78] wl18xx: add hw_init operation Arik Nemtsov
2012-05-10 9:13 ` [PATCH 22/78] wlcore/wl18xx: add hw op for setting Tx HW checksum Arik Nemtsov
2012-05-10 9:13 ` [PATCH 23/78] wlcore/wl18xx: add hw op for Rx " Arik Nemtsov
2012-05-10 9:13 ` [PATCH 24/78] wl18xx: add runtime configuration parameters Arik Nemtsov
2012-05-10 9:13 ` [PATCH 25/78] wlcore: track current channel type per vif Arik Nemtsov
2012-05-10 9:13 ` [PATCH 26/78] wl18xx: send channel type to FW on role start Arik Nemtsov
2012-05-10 9:13 ` [PATCH 27/78] wl18xx: ipmlement ap_rate_mask hw op Arik Nemtsov
2012-05-10 9:13 ` [PATCH 28/78] wlcore: support peer MIMO rates Arik Nemtsov
2012-05-10 9:13 ` [PATCH 29/78] wlcore/wl18xx: enable MIMO/wide-chan rates in AP-mode rate config Arik Nemtsov
2012-05-10 9:13 ` [PATCH 30/78] wl18xx: set HT capabilities Arik Nemtsov
2012-05-10 9:13 ` [PATCH 31/78] wl18xx: add module param for overriding HT caps Arik Nemtsov
2012-05-10 9:13 ` [PATCH 32/78] wl18xx: add board type module argument Arik Nemtsov
2012-05-10 9:13 ` [PATCH 33/78] wl18xx: translate and write the board type to SCR_PAD2 Arik Nemtsov
2012-05-10 9:13 ` [PATCH 34/78] wl18xx: read FW pc on recovery Arik Nemtsov
2012-05-10 9:13 ` [PATCH 35/78] wl18xx: disable FW log functionality Arik Nemtsov
2012-05-10 9:13 ` [PATCH 36/78] wl18xx: read clock frequency and do top init accordingly Arik Nemtsov
2012-05-10 9:13 ` [PATCH 37/78] wlcore: rename wl12xx.h to wlcore_i.h Arik Nemtsov
2012-05-10 9:13 ` [PATCH 38/78] wlcore/wl12xx: move ref_clock and tcxo_clock elements to wl12xx Arik Nemtsov
2012-05-10 9:13 ` [PATCH 39/78] wl18xx: implement hw op to read PG version Arik Nemtsov
2012-05-10 9:13 ` [PATCH 40/78] wlcore/wl12xx: move rx_mem_pool_addr element to wl12xx Arik Nemtsov
2012-05-10 9:13 ` [PATCH 41/78] wl18xx: init Tx-released index to 0 on HW init Arik Nemtsov
2012-05-10 9:13 ` [PATCH 42/78] wl18xx: don't upload NVS to FW Arik Nemtsov
2012-05-10 9:13 ` [PATCH 43/78] wl18xx: change board type enum according to new FW Arik Nemtsov
2012-05-10 9:13 ` [PATCH 44/78] wlcore/wl12xx: add plt_init op and move the code to wl12xx Arik Nemtsov
2012-05-10 9:13 ` [PATCH 45/78] wl18xx: add plt_init operation Arik Nemtsov
2012-05-10 9:13 ` [PATCH 46/78] wl18xx: change the low_band_component_type for HDK boards Arik Nemtsov
2012-05-10 9:13 ` [PATCH 47/78] wl18xx: add number of antennas and dc2dc type as module params Arik Nemtsov
2012-05-10 9:13 ` [PATCH 48/78] wl18xx: add module parameter to disable TCP checksum Arik Nemtsov
2012-05-10 9:13 ` [PATCH 49/78] wlcore/wl12xx/18xx: split fw_status struct into two Arik Nemtsov
2012-05-10 9:13 ` [PATCH 50/78] wl18xx: derive the MAC address from the BD_ADDR in fuse ROM Arik Nemtsov
2012-05-10 9:13 ` [PATCH 51/78] wl18xx: add a module parameter to control 11a support Arik Nemtsov
2012-05-10 9:13 ` [PATCH 52/78] wlcore: add module parameter to dump SDIO reads and writes Arik Nemtsov
2012-05-10 9:13 ` [PATCH 53/78] wl18xx: copy the default configuration before checking the board_type Arik Nemtsov
2012-05-10 9:13 ` [PATCH 54/78] wl18xx: changed default board_type to HDK Arik Nemtsov
2012-05-10 9:14 ` [PATCH 55/78] wlcore: add space for private area when allocating fw_status Arik Nemtsov
2012-05-10 9:14 ` [PATCH 56/78] wl18xx: change low_band_component_type value for COM8 Arik Nemtsov
2012-05-10 9:14 ` [PATCH 57/78] wlcore: reorder identify_chip and get_hw_info Arik Nemtsov
2012-05-10 9:14 ` [PATCH 58/78] wl18xx: disable MCS_13 for wl18xx PG 1.0 Arik Nemtsov
2012-05-10 9:14 ` [PATCH 59/78] wlcore: update beacon and probe_resp templates when rates change Arik Nemtsov
2012-05-10 9:14 ` [PATCH 60/78] wlcore: use all AP basic rates as default Arik Nemtsov
2012-05-10 9:14 ` [PATCH 61/78] wlcore: abstract debugfs fw_stats to be handled by the lower drivers Arik Nemtsov
2012-05-10 9:14 ` [PATCH 62/78] wlcore: add debugfs macro to help print fw statistics arrays Arik Nemtsov
2012-05-10 9:14 ` [PATCH 63/78] wl12xx: implement fw status debugfs entries Arik Nemtsov
2012-05-10 9:14 ` [PATCH 64/78] wl18xx: " Arik Nemtsov
2012-05-10 9:14 ` [PATCH 65/78] wlcore: create private static_data area and add operation to parse it Arik Nemtsov
2012-05-10 9:14 ` [PATCH 66/78] wl18xx: print the PHY firmware version from the private static data Arik Nemtsov
2012-05-10 9:14 ` [PATCH 67/78] wlcore: print the interrupt status when recovery is triggered Arik Nemtsov
2012-05-10 9:14 ` [PATCH 68/78] wl18xx: don't use MIMO when ht_mode is set to wide Arik Nemtsov
2012-05-10 9:14 ` [PATCH 69/78] wlcore: use proper values for supported local rates Arik Nemtsov
2012-05-10 9:14 ` [PATCH 70/78] wl18xx: add module parameter to force SISO 20MHz Arik Nemtsov
2012-05-10 9:14 ` [PATCH 71/78] wl18xx: add power limit reference value to mac_and_phy settings Arik Nemtsov
2012-05-10 9:14 ` [PATCH 72/78] wl18xx: export low/high band component values as module params Arik Nemtsov
2012-05-10 9:14 ` [PATCH 73/78] wl18xx: export pwr_limit_reference_11_abg value as a module parameter Arik Nemtsov
2012-05-10 9:14 ` Arik Nemtsov [this message]
2012-05-10 9:14 ` [PATCH 75/78] wlcore: increase aggregation buffer size by one page Arik Nemtsov
2012-05-10 9:14 ` [PATCH 76/78] wl18xx: increase tx_ba_win_size to 64 Arik Nemtsov
2012-05-10 9:14 ` [PATCH 77/78] wl18xx: use new fw stats structures Arik Nemtsov
2012-05-10 9:14 ` [PATCH 78/78] wl18xx: change default tcp_checksum to false Arik Nemtsov
2012-05-10 9:50 ` [PATCH 00/78] 18xx chip support Kalle Valo
2012-05-10 10:11 ` Arik Nemtsov
2012-05-10 10:15 ` Kalle Valo
2012-05-10 10:25 ` Arik Nemtsov
2012-05-11 5:57 ` Luciano Coelho
2012-05-11 9:03 ` Kalle Valo
2012-06-05 14:04 ` Luciano Coelho
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1336641263-5761-75-git-send-email-arik@wizery.com \
--to=arik@wizery.com \
--cc=coelho@ti.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).