[PATCH] wl12xx/wl18xx: add erp protection IE to the beacon filter

[PATCH] wl12xx/wl18xx: add erp protection IE to the beacon filter

[Eliad Peller]

We have to reconfigure the fw when erp protection should
be enabled/disabled. Pass beacons containing changes
in the ERP protection IE, so we could analyze them.

Signed-off-by: Eliad Peller <eliad@wizery.com>
---
 drivers/net/wireless/ti/wl12xx/main.c |    6 +++++-
 drivers/net/wireless/ti/wl18xx/main.c |    6 +++++-
 2 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c
index eec5eaa..7bc8f47 100644
--- a/drivers/net/wireless/ti/wl12xx/main.c
+++ b/drivers/net/wireless/ti/wl12xx/main.c
@@ -217,7 +217,7 @@ static struct wlcore_conf wl12xx_conf = {
 		.suspend_wake_up_event       = CONF_WAKE_UP_EVENT_N_DTIM,
 		.suspend_listen_interval     = 3,
 		.bcn_filt_mode               = CONF_BCN_FILT_MODE_ENABLED,
-		.bcn_filt_ie_count           = 2,
+		.bcn_filt_ie_count           = 3,
 		.bcn_filt_ie = {
 			[0] = {
 				.ie          = WLAN_EID_CHANNEL_SWITCH,
@@ -227,6 +227,10 @@ static struct wlcore_conf wl12xx_conf = {
 				.ie          = WLAN_EID_HT_OPERATION,
 				.rule        = CONF_BCN_RULE_PASS_ON_CHANGE,
 			},
+			[2] = {
+				.ie	     = WLAN_EID_ERP_INFO,
+				.rule	     = CONF_BCN_RULE_PASS_ON_CHANGE,
+			},
 		},
 		.synch_fail_thold            = 12,
 		.bss_lose_timeout            = 400,
diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c
index 1bbf195..baf0bb4 100644
--- a/drivers/net/wireless/ti/wl18xx/main.c
+++ b/drivers/net/wireless/ti/wl18xx/main.c
@@ -340,7 +340,7 @@ static struct wlcore_conf wl18xx_conf = {
 		.suspend_wake_up_event       = CONF_WAKE_UP_EVENT_N_DTIM,
 		.suspend_listen_interval     = 3,
 		.bcn_filt_mode               = CONF_BCN_FILT_MODE_ENABLED,
-		.bcn_filt_ie_count           = 2,
+		.bcn_filt_ie_count           = 3,
 		.bcn_filt_ie = {
 			[0] = {
 				.ie          = WLAN_EID_CHANNEL_SWITCH,
@@ -350,6 +350,10 @@ static struct wlcore_conf wl18xx_conf = {
 				.ie          = WLAN_EID_HT_OPERATION,
 				.rule        = CONF_BCN_RULE_PASS_ON_CHANGE,
 			},
+			[2] = {
+				.ie	     = WLAN_EID_ERP_INFO,
+				.rule	     = CONF_BCN_RULE_PASS_ON_CHANGE,
+			},
 		},
 		.synch_fail_thold            = 12,
 		.bss_lose_timeout            = 400,
-- 
1.7.6.401.g6a319

Re: [PATCH] wl12xx/wl18xx: add erp protection IE to the beacon filter

[Luciano Coelho]

On Tue, 2012-05-15 at 16:35 +0300, Eliad Peller wrote:
> We have to reconfigure the fw when erp protection should
> be enabled/disabled. Pass beacons containing changes
> in the ERP protection IE, so we could analyze them.
> 
> Signed-off-by: Eliad Peller <eliad@wizery.com>
> ---

Applied, thanks!

--
Luca.