From: Yoni Divinsky <yoni.divinsky@ti.com>
To: <linux-wireless@vger.kernel.org>
Cc: <arik@wizery.com>, <coelho@ti.com>
Subject: [PATCH] wlcore: add role_id to all the sched_scan commands
Date: Wed, 16 May 2012 11:34:17 +0300 [thread overview]
Message-ID: <1337157258-15163-1-git-send-email-yoni.divinsky@ti.com> (raw)
Due to a need by the firmware when working in multirole
the role id needs to be added to the structs of the
following commands:
CMD_CONNECTION_SCAN_CFG, CMD_CONNECTION_SCAN_SSID_CFG,
CMD_START_PERIODIC_SCAN, CMD_STOP_PERIODIC_SCAN
Signed-off-by: Yoni Divinsky <yoni.divinsky@ti.com>
Signed-off-by: Igal Chernobelsky <igalc@ti.com>
---
drivers/net/wireless/ti/wlcore/main.c | 5 +++--
drivers/net/wireless/ti/wlcore/scan.c | 9 +++++++--
drivers/net/wireless/ti/wlcore/scan.h | 15 +++++++++------
3 files changed, 19 insertions(+), 10 deletions(-)
diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index b6718e0..2d3f8f7 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -2448,7 +2448,7 @@ static int wl1271_sta_handle_idle(struct wl1271 *wl, struct wl12xx_vif *wlvif,
} else {
/* The current firmware only supports sched_scan in idle */
if (wl->sched_scanning) {
- wl1271_scan_sched_scan_stop(wl);
+ wl1271_scan_sched_scan_stop(wl, wlvif);
ieee80211_sched_scan_stopped(wl->hw);
}
@@ -3198,6 +3198,7 @@ static void wl1271_op_sched_scan_stop(struct ieee80211_hw *hw,
struct ieee80211_vif *vif)
{
struct wl1271 *wl = hw->priv;
+ struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif);
int ret;
wl1271_debug(DEBUG_MAC80211, "wl1271_op_sched_scan_stop");
@@ -3211,7 +3212,7 @@ static void wl1271_op_sched_scan_stop(struct ieee80211_hw *hw,
if (ret < 0)
goto out;
- wl1271_scan_sched_scan_stop(wl);
+ wl1271_scan_sched_scan_stop(wl, wlvif);
wl1271_ps_elp_sleep(wl);
out:
diff --git a/drivers/net/wireless/ti/wlcore/scan.c b/drivers/net/wireless/ti/wlcore/scan.c
index 97022f4..30bedd8 100644
--- a/drivers/net/wireless/ti/wlcore/scan.c
+++ b/drivers/net/wireless/ti/wlcore/scan.c
@@ -564,6 +564,7 @@ wl1271_scan_sched_scan_channels(struct wl1271 *wl,
/* Returns the scan type to be used or a negative value on error */
static int
wl12xx_scan_sched_scan_ssid_list(struct wl1271 *wl,
+ struct wl12xx_vif *wlvif,
struct cfg80211_sched_scan_request *req)
{
struct wl1271_cmd_sched_scan_ssid_list *cmd = NULL;
@@ -592,6 +593,7 @@ wl12xx_scan_sched_scan_ssid_list(struct wl1271 *wl,
goto out;
}
+ cmd->role_id = wlvif->dev_role_id;
if (!n_match_ssids) {
/* No filter, with ssids */
type = SCAN_SSID_FILTER_DISABLED;
@@ -679,6 +681,7 @@ int wl1271_scan_sched_scan_config(struct wl1271 *wl,
if (!cfg)
return -ENOMEM;
+ cfg->role_id = wlvif->dev_role_id;
cfg->rssi_threshold = c->rssi_threshold;
cfg->snr_threshold = c->snr_threshold;
cfg->n_probe_reqs = c->num_probe_reqs;
@@ -696,7 +699,7 @@ int wl1271_scan_sched_scan_config(struct wl1271 *wl,
cfg->intervals[i] = cpu_to_le32(req->interval);
cfg->ssid_len = 0;
- ret = wl12xx_scan_sched_scan_ssid_list(wl, req);
+ ret = wl12xx_scan_sched_scan_ssid_list(wl, wlvif, req);
if (ret < 0)
goto out;
@@ -768,6 +771,7 @@ int wl1271_scan_sched_scan_start(struct wl1271 *wl, struct wl12xx_vif *wlvif)
if (!start)
return -ENOMEM;
+ start->role_id = wlvif->dev_role_id;
start->tag = WL1271_SCAN_DEFAULT_TAG;
ret = wl1271_cmd_send(wl, CMD_START_PERIODIC_SCAN, start,
@@ -789,7 +793,7 @@ void wl1271_scan_sched_scan_results(struct wl1271 *wl)
ieee80211_sched_scan_results(wl->hw);
}
-void wl1271_scan_sched_scan_stop(struct wl1271 *wl)
+void wl1271_scan_sched_scan_stop(struct wl1271 *wl, struct wl12xx_vif *wlvif)
{
struct wl1271_cmd_sched_scan_stop *stop;
int ret = 0;
@@ -803,6 +807,7 @@ void wl1271_scan_sched_scan_stop(struct wl1271 *wl)
return;
}
+ stop->role_id = wlvif->dev_role_id;
stop->tag = WL1271_SCAN_DEFAULT_TAG;
ret = wl1271_cmd_send(wl, CMD_STOP_PERIODIC_SCAN, stop,
diff --git a/drivers/net/wireless/ti/wlcore/scan.h b/drivers/net/wireless/ti/wlcore/scan.h
index ea53223..29f3c8d 100644
--- a/drivers/net/wireless/ti/wlcore/scan.h
+++ b/drivers/net/wireless/ti/wlcore/scan.h
@@ -40,7 +40,7 @@ int wl1271_scan_sched_scan_config(struct wl1271 *wl,
struct cfg80211_sched_scan_request *req,
struct ieee80211_sched_scan_ies *ies);
int wl1271_scan_sched_scan_start(struct wl1271 *wl, struct wl12xx_vif *wlvif);
-void wl1271_scan_sched_scan_stop(struct wl1271 *wl);
+void wl1271_scan_sched_scan_stop(struct wl1271 *wl, struct wl12xx_vif *wlvif);
void wl1271_scan_sched_scan_results(struct wl1271 *wl);
#define WL1271_SCAN_MAX_CHANNELS 24
@@ -188,8 +188,8 @@ struct wl1271_cmd_sched_scan_config {
u8 n_pactive_ch; /* number of pactive (passive until fw detects energy)
channels in BG band */
-
- u8 padding[2];
+ u8 role_id;
+ u8 padding[1];
struct conn_scan_ch_params channels_2[MAX_CHANNELS_2GHZ];
struct conn_scan_ch_params channels_5[MAX_CHANNELS_5GHZ];
@@ -216,21 +216,24 @@ struct wl1271_cmd_sched_scan_ssid_list {
u8 n_ssids;
struct wl1271_ssid ssids[SCHED_SCAN_MAX_SSIDS];
- u8 padding[3];
+ u8 role_id;
+ u8 padding[2];
} __packed;
struct wl1271_cmd_sched_scan_start {
struct wl1271_cmd_header header;
u8 tag;
- u8 padding[3];
+ u8 role_id;
+ u8 padding[2];
} __packed;
struct wl1271_cmd_sched_scan_stop {
struct wl1271_cmd_header header;
u8 tag;
- u8 padding[3];
+ u8 role_id;
+ u8 padding[2];
} __packed;
--
1.7.0.4
next reply other threads:[~2012-05-16 8:44 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-16 8:34 Yoni Divinsky [this message]
2012-05-16 8:34 ` [PATCH v2] wlcore: do not send stop fwlog cmd if fw is hanged Yoni Divinsky
2012-06-06 17:07 ` Luciano Coelho
2012-06-06 17:06 ` [PATCH] wlcore: add role_id to all the sched_scan commands Luciano Coelho
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1337157258-15163-1-git-send-email-yoni.divinsky@ti.com \
--to=yoni.divinsky@ti.com \
--cc=arik@wizery.com \
--cc=coelho@ti.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).