linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Johannes Berg <johannes@sipsolutions.net>
To: linux-wireless <linux-wireless@vger.kernel.org>
Cc: Kalle Valo <kvalo@qca.qualcomm.com>, Luciano Coelho <coelho@ti.com>
Subject: [RFC] cfg80211: don't allow WoWLAN support without CONFIG_PM
Date: Wed, 30 May 2012 15:45:42 +0200	[thread overview]
Message-ID: <1338385542.4511.19.camel@jlt3.sipsolutions.net> (raw)

From: Johannes Berg <johannes.berg@intel.com>

When CONFIG_PM is enabled, no device can possibly
support WoWLAN since it can't go to sleep to start
with. Due to this, mac80211 had even rejected the
hardware registration. By making all the code and
data for WoWLAN depend on CONFIG_PM we can promote
this runtime error to a compile-time error.

Add #ifdef around all WoWLAN code to remove it in
systems that don't need it as they never suspend.

Cc: Kalle Valo <kvalo@qca.qualcomm.com>
Cc: Luciano Coelho <coelho@ti.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/ath/ath6kl/cfg80211.c |    2 ++
 drivers/net/wireless/ti/wlcore/main.c      |    2 ++
 include/net/cfg80211.h                     |    2 ++
 net/mac80211/main.c                        |    7 +++----
 net/wireless/core.c                        |    4 ++++
 net/wireless/nl80211.c                     |    6 ++++++
 6 files changed, 19 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c
index b869a35..cfa24a0 100644
--- a/drivers/net/wireless/ath/ath6kl/cfg80211.c
+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c
@@ -3517,6 +3517,7 @@ int ath6kl_cfg80211_init(struct ath6kl *ar)
 	wiphy->cipher_suites = cipher_suites;
 	wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites);
 
+#ifdef CONFIG_PM
 	wiphy->wowlan.flags = WIPHY_WOWLAN_MAGIC_PKT |
 			      WIPHY_WOWLAN_DISCONNECT |
 			      WIPHY_WOWLAN_GTK_REKEY_FAILURE  |
@@ -3526,6 +3527,7 @@ int ath6kl_cfg80211_init(struct ath6kl *ar)
 	wiphy->wowlan.n_patterns = WOW_MAX_FILTERS_PER_LIST;
 	wiphy->wowlan.pattern_min_len = 1;
 	wiphy->wowlan.pattern_max_len = WOW_PATTERN_SIZE;
+#endif
 
 	wiphy->max_sched_scan_ssids = MAX_PROBED_SSID_INDEX;
 
diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index acef933..d7cd9b5 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -5301,6 +5301,7 @@ int __devinit wlcore_probe(struct wl1271 *wl, struct platform_device *pdev)
 		goto out_free_hw;
 	}
 
+#ifdef CONFIG_PM
 	ret = enable_irq_wake(wl->irq);
 	if (!ret) {
 		wl->irq_wake_enabled = true;
@@ -5315,6 +5316,7 @@ int __devinit wlcore_probe(struct wl1271 *wl, struct platform_device *pdev)
 		}
 	}
 	disable_irq(wl->irq);
+#endif
 
 	ret = wl1271_init_ieee80211(wl);
 	if (ret)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 0289d4c..f3094dd 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -2083,7 +2083,9 @@ struct wiphy {
 	char fw_version[ETHTOOL_BUSINFO_LEN];
 	u32 hw_version;
 
+#ifdef CONFIG_PM
 	struct wiphy_wowlan_support wowlan;
+#endif
 
 	u16 max_remain_on_channel_duration;
 
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index f5548e9..41a2fba 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -698,12 +698,11 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
 	     local->hw.offchannel_tx_hw_queue >= local->hw.queues))
 		return -EINVAL;
 
-	if ((hw->wiphy->wowlan.flags || hw->wiphy->wowlan.n_patterns)
 #ifdef CONFIG_PM
-	    && (!local->ops->suspend || !local->ops->resume)
-#endif
-	    )
+	if ((hw->wiphy->wowlan.flags || hw->wiphy->wowlan.n_patterns) &&
+	    (!local->ops->suspend || !local->ops->resume))
 		return -EINVAL;
+#endif
 
 	if ((hw->flags & IEEE80211_HW_SCAN_WHILE_IDLE) && !local->ops->hw_scan)
 		return -EINVAL;
diff --git a/net/wireless/core.c b/net/wireless/core.c
index a87d435..b588e4d 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -484,9 +484,11 @@ int wiphy_register(struct wiphy *wiphy)
 	int i;
 	u16 ifmodes = wiphy->interface_modes;
 
+#ifdef CONFIG_PM
 	if (WARN_ON((wiphy->wowlan.flags & WIPHY_WOWLAN_GTK_REKEY_FAILURE) &&
 		    !(wiphy->wowlan.flags & WIPHY_WOWLAN_SUPPORTS_GTK_REKEY)))
 		return -EINVAL;
+#endif
 
 	if (WARN_ON(wiphy->ap_sme_capa &&
 		    !(wiphy->flags & WIPHY_FLAG_HAVE_AP_SME)))
@@ -563,12 +565,14 @@ int wiphy_register(struct wiphy *wiphy)
 		return -EINVAL;
 	}
 
+#ifdef CONFIG_PM
 	if (rdev->wiphy.wowlan.n_patterns) {
 		if (WARN_ON(!rdev->wiphy.wowlan.pattern_min_len ||
 			    rdev->wiphy.wowlan.pattern_min_len >
 			    rdev->wiphy.wowlan.pattern_max_len))
 			return -EINVAL;
 	}
+#endif
 
 	/* check and set up bitrates */
 	ieee80211_set_bitrate_flags(wiphy);
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 206465d..4088e73 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -1018,6 +1018,7 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
 		nla_nest_end(msg, nl_ifs);
 	}
 
+#ifdef CONFIG_PM
 	if (dev->wiphy.wowlan.flags || dev->wiphy.wowlan.n_patterns) {
 		struct nlattr *nl_wowlan;
 
@@ -1058,6 +1059,7 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
 
 		nla_nest_end(msg, nl_wowlan);
 	}
+#endif
 
 	if (nl80211_put_iftypes(msg, NL80211_ATTR_SOFTWARE_IFTYPES,
 				dev->wiphy.software_iftypes))
@@ -6043,6 +6045,7 @@ static int nl80211_leave_mesh(struct sk_buff *skb, struct genl_info *info)
 	return cfg80211_leave_mesh(rdev, dev);
 }
 
+#ifdef CONFIG_PM
 static int nl80211_get_wowlan(struct sk_buff *skb, struct genl_info *info)
 {
 	struct cfg80211_registered_device *rdev = info->user_ptr[0];
@@ -6271,6 +6274,7 @@ static int nl80211_set_wowlan(struct sk_buff *skb, struct genl_info *info)
 	kfree(new_triggers.patterns);
 	return err;
 }
+#endif
 
 static int nl80211_set_rekey_data(struct sk_buff *skb, struct genl_info *info)
 {
@@ -6925,6 +6929,7 @@ static struct genl_ops nl80211_ops[] = {
 		.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
 				  NL80211_FLAG_NEED_RTNL,
 	},
+#ifdef CONFIG_PM
 	{
 		.cmd = NL80211_CMD_GET_WOWLAN,
 		.doit = nl80211_get_wowlan,
@@ -6941,6 +6946,7 @@ static struct genl_ops nl80211_ops[] = {
 		.internal_flags = NL80211_FLAG_NEED_WIPHY |
 				  NL80211_FLAG_NEED_RTNL,
 	},
+#endif
 	{
 		.cmd = NL80211_CMD_SET_REKEY_OFFLOAD,
 		.doit = nl80211_set_rekey_data,
-- 
1.7.10




             reply	other threads:[~2012-05-30 13:46 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-05-30 13:45 Johannes Berg [this message]
2012-05-30 14:45 ` [RFC] cfg80211: don't allow WoWLAN support without CONFIG_PM Eliad Peller
2012-05-30 14:47   ` Johannes Berg
2012-05-30 17:50 ` Kalle Valo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1338385542.4511.19.camel@jlt3.sipsolutions.net \
    --to=johannes@sipsolutions.net \
    --cc=coelho@ti.com \
    --cc=kvalo@qca.qualcomm.com \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).