From: Victor Goldenshtein <victorg@ti.com>
To: <linux-wireless@vger.kernel.org>
Cc: <johannes@sipsolutions.net>
Subject: [PATCH v3] mac80211: add command to get current rssi
Date: Thu, 31 May 2012 15:35:55 +0300 [thread overview]
Message-ID: <1338467755-8331-1-git-send-email-victorg@ti.com> (raw)
Get current rssi (in dBm) from the driver/FW.
Instead of reporting the signal received in the last
rx packet, which might be inaccurate if rx traffic is
low and beacon filtering is enabled, get the singal
from the driver/FW.
Signed-off-by: Victor Goldenshtein <victorg@ti.com>
---
v3:
fixed indentation in sta_set_sinfo().
updated documentation of the get_rssi().
include/net/mac80211.h | 5 +++++
net/mac80211/cfg.c | 21 +++++++++++++--------
net/mac80211/driver-ops.h | 16 ++++++++++++++++
net/mac80211/driver-trace.h | 6 ++++++
4 files changed, 40 insertions(+), 8 deletions(-)
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 4d6e6c6..efee816 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -2231,6 +2231,9 @@ enum ieee80211_rate_control_changed {
* @get_et_strings: Ethtool API to get a set of strings to describe stats
* and perhaps other supported types of ethtool data-sets.
*
+ * @get_rssi: Get current signal strength in dBm, the function is optional
+ * and can sleep.
+ *
*/
struct ieee80211_ops {
void (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb);
@@ -2370,6 +2373,8 @@ struct ieee80211_ops {
void (*get_et_strings)(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
u32 sset, u8 *data);
+ int (*get_rssi)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta, s8 *rssi_dbm);
};
/**
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 0221270..c8516aa 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -353,6 +353,7 @@ void sta_set_rate_info_tx(struct sta_info *sta,
static void sta_set_sinfo(struct sta_info *sta, struct station_info *sinfo)
{
struct ieee80211_sub_if_data *sdata = sta->sdata;
+ struct ieee80211_local *local = sdata->local;
struct timespec uptime;
sinfo->generation = sdata->local->sta_generation;
@@ -388,7 +389,9 @@ static void sta_set_sinfo(struct sta_info *sta, struct station_info *sinfo)
if ((sta->local->hw.flags & IEEE80211_HW_SIGNAL_DBM) ||
(sta->local->hw.flags & IEEE80211_HW_SIGNAL_UNSPEC)) {
sinfo->filled |= STATION_INFO_SIGNAL | STATION_INFO_SIGNAL_AVG;
- sinfo->signal = (s8)sta->last_signal;
+ if (!local->ops->get_rssi ||
+ drv_get_rssi(local, sdata, &sta->sta, &sinfo->signal))
+ sinfo->signal = (s8)sta->last_signal;
sinfo->signal_avg = (s8) -ewma_read(&sta->avg_signal);
}
@@ -517,7 +520,7 @@ static void ieee80211_get_et_stats(struct wiphy *wiphy,
* network device.
*/
- rcu_read_lock();
+ mutex_lock(&local->sta_mtx);
if (sdata->vif.type == NL80211_IFTYPE_STATION) {
sta = sta_info_get_bss(sdata, sdata->u.mgd.bssid);
@@ -546,7 +549,7 @@ static void ieee80211_get_et_stats(struct wiphy *wiphy,
data[i] = (u8)sinfo.signal_avg;
i++;
} else {
- list_for_each_entry_rcu(sta, &local->sta_list, list) {
+ list_for_each_entry(sta, &local->sta_list, list) {
/* Make sure this station belongs to the proper dev */
if (sta->sdata->dev != dev)
continue;
@@ -603,7 +606,7 @@ do_survey:
else
data[i++] = -1LL;
- rcu_read_unlock();
+ mutex_unlock(&local->sta_mtx);
if (WARN_ON(i != STA_STATS_LEN))
return;
@@ -629,10 +632,11 @@ static int ieee80211_dump_station(struct wiphy *wiphy, struct net_device *dev,
int idx, u8 *mac, struct station_info *sinfo)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct ieee80211_local *local = sdata->local;
struct sta_info *sta;
int ret = -ENOENT;
- rcu_read_lock();
+ mutex_lock(&local->sta_mtx);
sta = sta_info_get_by_idx(sdata, idx);
if (sta) {
@@ -641,7 +645,7 @@ static int ieee80211_dump_station(struct wiphy *wiphy, struct net_device *dev,
sta_set_sinfo(sta, sinfo);
}
- rcu_read_unlock();
+ mutex_unlock(&local->sta_mtx);
return ret;
}
@@ -658,10 +662,11 @@ static int ieee80211_get_station(struct wiphy *wiphy, struct net_device *dev,
u8 *mac, struct station_info *sinfo)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct ieee80211_local *local = sdata->local;
struct sta_info *sta;
int ret = -ENOENT;
- rcu_read_lock();
+ mutex_lock(&local->sta_mtx);
sta = sta_info_get_bss(sdata, mac);
if (sta) {
@@ -669,7 +674,7 @@ static int ieee80211_get_station(struct wiphy *wiphy, struct net_device *dev,
sta_set_sinfo(sta, sinfo);
}
- rcu_read_unlock();
+ mutex_unlock(&local->sta_mtx);
return ret;
}
diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h
index 6d33a0c..370c721 100644
--- a/net/mac80211/driver-ops.h
+++ b/net/mac80211/driver-ops.h
@@ -845,4 +845,20 @@ drv_allow_buffered_frames(struct ieee80211_local *local,
more_data);
trace_drv_return_void(local);
}
+
+static inline int drv_get_rssi(struct ieee80211_local *local,
+ struct ieee80211_sub_if_data *sdata,
+ struct ieee80211_sta *sta,
+ s8 *rssi_dbm)
+{
+ int ret;
+
+ might_sleep();
+
+ trace_drv_get_rssi(local, sdata);
+ ret = local->ops->get_rssi(&local->hw, &sdata->vif, sta, rssi_dbm);
+ trace_drv_return_int(local, ret);
+
+ return ret;
+}
#endif /* __MAC80211_DRIVER_OPS */
diff --git a/net/mac80211/driver-trace.h b/net/mac80211/driver-trace.h
index 6de00b2..fc91ac4 100644
--- a/net/mac80211/driver-trace.h
+++ b/net/mac80211/driver-trace.h
@@ -1218,6 +1218,12 @@ DEFINE_EVENT(release_evt, drv_allow_buffered_frames,
TP_ARGS(local, sta, tids, num_frames, reason, more_data)
);
+DEFINE_EVENT(local_sdata_evt, drv_get_rssi,
+ TP_PROTO(struct ieee80211_local *local,
+ struct ieee80211_sub_if_data *sdata),
+ TP_ARGS(local, sdata)
+);
+
/*
* Tracing for API calls that drivers call.
*/
--
1.7.5.4
next reply other threads:[~2012-05-31 12:38 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-31 12:35 Victor Goldenshtein [this message]
2012-05-31 12:48 ` [PATCH v3] mac80211: add command to get current rssi Johannes Berg
2012-05-31 13:06 ` Goldenshtein, Victor
2012-05-31 13:07 ` Johannes Berg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1338467755-8331-1-git-send-email-victorg@ti.com \
--to=victorg@ti.com \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).