From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
To: "John W . Linville" <linville@tuxdriver.com>,
Johannes Berg <johannes@sipsolutions.net>
Cc: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>,
<linux-wireless@vger.kernel.org>,
"Luis R . Rodriguez" <rodrigue@qca.qualcomm.com>
Subject: [PATCH 60g v1 4/5] wireless: 60g protocol constants
Date: Sun, 1 Jul 2012 09:45:53 +0300 [thread overview]
Message-ID: <1341125155-628-5-git-send-email-qca_vkondrat@qca.qualcomm.com> (raw)
In-Reply-To: <1341125155-628-1-git-send-email-qca_vkondrat@qca.qualcomm.com>
Provide various constants as defined by the 802.11ad:
frame types, IE's, capability bits, action categories
Introduce GCMP cipher, mandatory by 802.11ad
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
---
include/linux/ieee80211.h | 89 ++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 88 insertions(+), 1 deletion(-)
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 318fc1f..90145bd 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -47,6 +47,7 @@
#define IEEE80211_FCTL_MOREDATA 0x2000
#define IEEE80211_FCTL_PROTECTED 0x4000
#define IEEE80211_FCTL_ORDER 0x8000
+#define IEEE80211_FCTL_CTL_EXT 0x0f00
#define IEEE80211_SCTL_FRAG 0x000F
#define IEEE80211_SCTL_SEQ 0xFFF0
@@ -54,6 +55,7 @@
#define IEEE80211_FTYPE_MGMT 0x0000
#define IEEE80211_FTYPE_CTL 0x0004
#define IEEE80211_FTYPE_DATA 0x0008
+#define IEEE80211_FTYPE_EXT 0x000c
/* management */
#define IEEE80211_STYPE_ASSOC_REQ 0x0000
@@ -70,6 +72,7 @@
#define IEEE80211_STYPE_ACTION 0x00D0
/* control */
+#define IEEE80211_STYPE_CTL_EXT 0x0060
#define IEEE80211_STYPE_BACK_REQ 0x0080
#define IEEE80211_STYPE_BACK 0x0090
#define IEEE80211_STYPE_PSPOLL 0x00A0
@@ -97,6 +100,18 @@
#define IEEE80211_STYPE_QOS_CFPOLL 0x00E0
#define IEEE80211_STYPE_QOS_CFACKPOLL 0x00F0
+/* extension, added by 802.11ad */
+#define IEEE80211_STYPE_DMG_BEACON 0x0000
+
+/* control extension - for IEEE80211_FTYPE_CTL | IEEE80211_STYPE_CTL_EXT */
+#define IEEE80211_CTL_EXT_POLL 0x2000
+#define IEEE80211_CTL_EXT_SPR 0x3000
+#define IEEE80211_CTL_EXT_GRANT 0x4000
+#define IEEE80211_CTL_EXT_DMG_CTS 0x5000
+#define IEEE80211_CTL_EXT_DMG_DTS 0x6000
+#define IEEE80211_CTL_EXT_SSW 0x8000
+#define IEEE80211_CTL_EXT_SSW_FBACK 0x9000
+#define IEEE80211_CTL_EXT_SSW_ACK 0xa000
/* miscellaneous IEEE 802.11 constants */
#define IEEE80211_MAX_FRAG_THRESHOLD 2352
@@ -1124,6 +1139,21 @@ struct ieee80211_ht_operation {
#define WLAN_CAPABILITY_QOS (1<<9)
#define WLAN_CAPABILITY_SHORT_SLOT_TIME (1<<10)
#define WLAN_CAPABILITY_DSSS_OFDM (1<<13)
+
+/* DMG (60gHz) 802.11ad */
+/* type - bits 0..1 */
+#define WLAN_CAPABILITY_DMG_TYPE_IBSS (1<<0) /* Tx by: STA */
+#define WLAN_CAPABILITY_DMG_TYPE_PBSS (2<<0) /* Tx by: PCP */
+#define WLAN_CAPABILITY_DMG_TYPE_AP (3<<0) /* Tx by: AP */
+
+#define WLAN_CAPABILITY_DMG_CBAP_ONLY (1<<2)
+#define WLAN_CAPABILITY_DMG_CBAP_SOURCE (1<<3)
+#define WLAN_CAPABILITY_DMG_PRIVACY (1<<4)
+#define WLAN_CAPABILITY_DMG_ECPAC (1<<5)
+
+#define WLAN_CAPABILITY_DMG_SPECTRUM_MGMT (1<<8)
+#define WLAN_CAPABILITY_DMG_RADIO_MEASURE (1<<12)
+
/* measurement */
#define IEEE80211_SPCT_MSR_RPRT_MODE_LATE (1<<0)
#define IEEE80211_SPCT_MSR_RPRT_MODE_INCAPABLE (1<<1)
@@ -1133,7 +1163,6 @@ struct ieee80211_ht_operation {
#define IEEE80211_SPCT_MSR_RPRT_TYPE_CCA 1
#define IEEE80211_SPCT_MSR_RPRT_TYPE_RPI 2
-
/* 802.11g ERP information element */
#define WLAN_ERP_NON_ERP_PRESENT (1<<0)
#define WLAN_ERP_USE_PROTECTION (1<<1)
@@ -1145,6 +1174,16 @@ enum {
WLAN_ERP_PREAMBLE_LONG = 1,
};
+/* Band ID, 802.11ad #8.4.1.45 */
+enum {
+ IEEE80211_BANDID_TV_WS = 0, /* TV white spaces */
+ IEEE80211_BANDID_SUB1 = 1, /* Sub-1 GHz (excluding TV white spaces) */
+ IEEE80211_BANDID_2G = 2, /* 2.4 GHz */
+ IEEE80211_BANDID_3G = 3, /* 3.6 GHz */
+ IEEE80211_BANDID_5G = 4, /* 4.9 and 5 GHz */
+ IEEE80211_BANDID_60G = 5, /* 60 GHz */
+};
+
/* Status codes */
enum ieee80211_statuscode {
WLAN_STATUS_SUCCESS = 0,
@@ -1196,6 +1235,17 @@ enum ieee80211_statuscode {
WLAN_STATUS_ANTI_CLOG_REQUIRED = 76,
WLAN_STATUS_FCG_NOT_SUPP = 78,
WLAN_STATUS_STA_NO_TBTT = 78,
+ /* 802.11ad */
+ WLAN_STATUS_REJECTED_WITH_SUGGESTED_CHANGES = 39,
+ WLAN_STATUS_REJECTED_FOR_DELAY_PERIOD = 47,
+ WLAN_STATUS_REJECT_WITH_SCHEDULE = 83,
+ WLAN_STATUS_PENDING_ADMITTING_FST_SESSION = 86,
+ WLAN_STATUS_PERFORMING_FST_NOW = 87,
+ WLAN_STATUS_PENDING_GAP_IN_BA_WINDOW = 88,
+ WLAN_STATUS_REJECT_U_PID_SETTING = 89,
+ WLAN_STATUS_REJECT_DSE_BAND = 96,
+ WLAN_STATUS_DENIED_WITH_SUGGESTED_BAND_AND_CHANNEL = 99,
+ WLAN_STATUS_DENIED_DUE_TO_SPECTRUM_MANAGEMENT = 103,
};
@@ -1352,6 +1402,39 @@ enum ieee80211_eid {
WLAN_EID_DSE_REGISTERED_LOCATION = 58,
WLAN_EID_SUPPORTED_REGULATORY_CLASSES = 59,
WLAN_EID_EXT_CHANSWITCH_ANN = 60,
+ /* 802.11ad */
+ WLAN_EID_NON_TX_BSSID_CAP = 83,
+ WLAN_EID_WAKEUP_SCHEDULE = 143,
+ WLAN_EID_EXT_SCHEDULE = 144,
+ WLAN_EID_STA_AVAILABILITY = 145,
+ WLAN_EID_DMG_TSPEC = 146,
+ WLAN_EID_DMG_AT = 147,
+ WLAN_EID_DMG_CAP = 148,
+ WLAN_EID_DMG_OPERATION = 151,
+ WLAN_EID_DMG_BSS_PARAM_CHANGE = 152,
+ WLAN_EID_DMG_BEAM_REFINEMENT = 153,
+ WLAN_EID_CHANNEL_MEASURE_FEEDBACK = 154,
+ WLAN_EID_AWAKE_WINDOW = 157,
+ WLAN_EID_MULTI_BAND = 158,
+ WLAN_EID_ADDBA_EXT = 159,
+ WLAN_EID_NEXT_PCP_LIST = 160,
+ WLAN_EID_PCP_HANDOVER = 161,
+ WLAN_EID_DMG_LINK_MARGIN = 162,
+ WLAN_EID_SWITCHING_STREAM = 163,
+ WLAN_EID_SESSION_TRANSITION = 164,
+ WLAN_EID_DYN_TONE_PAIRING_REPORT = 165,
+ WLAN_EID_CLUSTER_REPORT = 166,
+ WLAN_EID_RELAY_CAP = 167,
+ WLAN_EID_RELAY_XFER_PARAM_SET = 168,
+ WLAN_EID_BEAM_LINK_MAINT = 169,
+ WLAN_EID_MULTIPLE_MAC_ADDR = 170,
+ WLAN_EID_U_PID = 171,
+ WLAN_EID_DMG_LINK_ADAPT_ACK = 172,
+ WLAN_EID_QUIET_PERIOD_REQ = 175,
+ WLAN_EID_QUIET_PERIOD_RESP = 177,
+ WLAN_EID_EPAC_POLICY = 182,
+ WLAN_EID_CLISTER_TIME_OFF = 183,
+ WLAN_EID_ANTENNA_SECTOR_ID_PATTERN = 190,
};
/* Action category code */
@@ -1368,7 +1451,10 @@ enum ieee80211_category {
WLAN_CATEGORY_MESH_ACTION = 13,
WLAN_CATEGORY_MULTIHOP_ACTION = 14,
WLAN_CATEGORY_SELF_PROTECTED = 15,
+ WLAN_CATEGORY_DMG = 16,
WLAN_CATEGORY_WMM = 17,
+ WLAN_CATEGORY_FST = 18,
+ WLAN_CATEGORY_UNPROT_DMG = 20,
WLAN_CATEGORY_VENDOR_SPECIFIC_PROTECTED = 126,
WLAN_CATEGORY_VENDOR_SPECIFIC = 127,
};
@@ -1616,6 +1702,7 @@ enum ieee80211_sa_query_action {
#define WLAN_CIPHER_SUITE_CCMP 0x000FAC04
#define WLAN_CIPHER_SUITE_WEP104 0x000FAC05
#define WLAN_CIPHER_SUITE_AES_CMAC 0x000FAC06
+#define WLAN_CIPHER_SUITE_GCMP 0x000FAC08
#define WLAN_CIPHER_SUITE_SMS4 0x00147201
--
1.7.9.5
next prev parent reply other threads:[~2012-07-01 6:46 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-01 6:45 [PATCH 60g v1 0/5] Infrastructure for 60g (802.11ad) Vladimir Kondratiev
2012-07-01 6:45 ` [PATCH 60g v1 1/5] wireless: add 802.11ad (60gHz band) Vladimir Kondratiev
2012-07-01 6:45 ` [PATCH 60g v1 2/5] wireless: rate check logic for 60g Vladimir Kondratiev
2012-07-01 6:45 ` [PATCH 60g v1 3/5] wireless: regulatory " Vladimir Kondratiev
2012-07-01 6:45 ` Vladimir Kondratiev [this message]
2012-07-01 6:45 ` [PATCH 60g v1 5/5] wireless: bitrate calculation " Vladimir Kondratiev
[not found] ` <28548934.Ph3aMyPjKt@lx-vladimir>
2012-07-01 11:21 ` Johannes Berg
2012-07-01 11:23 ` [PATCH 60g v1 0/5] Infrastructure for 60g (802.11ad) Johannes Berg
2012-07-01 16:28 ` Vladimir Kondratiev
2012-07-01 16:55 ` Joe Perches
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1341125155-628-5-git-send-email-qca_vkondrat@qca.qualcomm.com \
--to=qca_vkondrat@qca.qualcomm.com \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=rodrigue@qca.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox