From: Samuel Ortiz <sameo@linux.intel.com>
To: "John W. Linville" <linville@tuxdriver.com>
Cc: Lauro Ramos Venancio <lauro.venancio@openbossa.org>,
Aloisio Almeida Jr <aloisio.almeida@openbossa.org>,
Ilan Elias <ilane@ti.com>,
linux-wireless@vger.kernel.org, linux-nfc@lists.01.org,
Samuel Ortiz <sameo@linux.intel.com>
Subject: [PATCH 30/33] NFC: Add initial Sony RC-S360 support to pn533
Date: Fri, 6 Jul 2012 22:09:50 +0200 [thread overview]
Message-ID: <1341605393-32056-31-git-send-email-sameo@linux.intel.com> (raw)
In-Reply-To: <1341605393-32056-1-git-send-email-sameo@linux.intel.com>
Sony RC-S360 is also known as the Sony PaSoRi contactless reader.
Only type 2, 3 and 4 tag reading is supported at the moment.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
---
drivers/nfc/pn533.c | 219 ++++++++++++++++++++++++++++++++++++++++++---------
1 file changed, 181 insertions(+), 38 deletions(-)
diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c
index 9ac829e..37786ff 100644
--- a/drivers/nfc/pn533.c
+++ b/drivers/nfc/pn533.c
@@ -38,9 +38,42 @@
#define SCM_VENDOR_ID 0x4E6
#define SCL3711_PRODUCT_ID 0x5591
+#define SONY_VENDOR_ID 0x054c
+#define PASORI_PRODUCT_ID 0x02e1
+
+#define PN533_QUIRKS_TYPE_A BIT(0)
+#define PN533_QUIRKS_TYPE_F BIT(1)
+#define PN533_QUIRKS_DEP BIT(2)
+#define PN533_QUIRKS_RAW_EXCHANGE BIT(3)
+
+#define PN533_DEVICE_STD 0x1
+#define PN533_DEVICE_PASORI 0x2
+
+#define PN533_ALL_PROTOCOLS (NFC_PROTO_JEWEL_MASK | NFC_PROTO_MIFARE_MASK \
+ | NFC_PROTO_FELICA_MASK | NFC_PROTO_ISO14443_MASK \
+ | NFC_PROTO_NFC_DEP_MASK)
+
+#define PN533_NO_TYPE_B_PROTOCOLS (NFC_PROTO_JEWEL_MASK | \
+ NFC_PROTO_MIFARE_MASK | \
+ NFC_PROTO_FELICA_MASK | \
+ NFC_PROTO_NFC_DEP_MASK)
+
static const struct usb_device_id pn533_table[] = {
- { USB_DEVICE(PN533_VENDOR_ID, PN533_PRODUCT_ID) },
- { USB_DEVICE(SCM_VENDOR_ID, SCL3711_PRODUCT_ID) },
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = PN533_VENDOR_ID,
+ .idProduct = PN533_PRODUCT_ID,
+ .driver_info = PN533_DEVICE_STD,
+ },
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = SCM_VENDOR_ID,
+ .idProduct = SCL3711_PRODUCT_ID,
+ .driver_info = PN533_DEVICE_STD,
+ },
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = SONY_VENDOR_ID,
+ .idProduct = PASORI_PRODUCT_ID,
+ .driver_info = PN533_DEVICE_PASORI,
+ },
{ }
};
MODULE_DEVICE_TABLE(usb, pn533_table);
@@ -72,6 +105,7 @@ MODULE_DEVICE_TABLE(usb, pn533_table);
#define PN533_CMD_GET_FIRMWARE_VERSION 0x02
#define PN533_CMD_RF_CONFIGURATION 0x32
#define PN533_CMD_IN_DATA_EXCHANGE 0x40
+#define PN533_CMD_IN_COMM_THRU 0x42
#define PN533_CMD_IN_LIST_PASSIVE_TARGET 0x4A
#define PN533_CMD_IN_ATR 0x50
#define PN533_CMD_IN_RELEASE 0x52
@@ -109,6 +143,7 @@ struct pn533_fw_version {
/* PN533_CMD_RF_CONFIGURATION */
#define PN533_CFGITEM_TIMING 0x02
#define PN533_CFGITEM_MAX_RETRIES 0x05
+#define PN533_CFGITEM_PASORI 0x82
#define PN533_CONFIG_TIMING_102 0xb
#define PN533_CONFIG_TIMING_204 0xc
@@ -344,6 +379,8 @@ struct pn533 {
u8 tgt_available_prots;
u8 tgt_active_prot;
u8 tgt_mode;
+
+ u32 device_type;
};
struct pn533_frame {
@@ -1768,13 +1805,31 @@ static int pn533_build_tx_frame(struct pn533 *dev, struct sk_buff *skb,
}
if (target == true) {
- skb_push(skb, PN533_CMD_DATAEXCH_HEAD_LEN);
- out_frame = (struct pn533_frame *) skb->data;
+ switch (dev->device_type) {
+ case PN533_DEVICE_STD:
+ skb_push(skb, PN533_CMD_DATAEXCH_HEAD_LEN);
+ out_frame = (struct pn533_frame *) skb->data;
+ pn533_tx_frame_init(out_frame,
+ PN533_CMD_IN_DATA_EXCHANGE);
+ tg = 1;
+ memcpy(PN533_FRAME_CMD_PARAMS_PTR(out_frame),
+ &tg, sizeof(u8));
+ out_frame->datalen += sizeof(u8);
+ break;
+
+ case PN533_DEVICE_PASORI:
+ skb_push(skb, PN533_CMD_DATAEXCH_HEAD_LEN - 1);
+ out_frame = (struct pn533_frame *) skb->data;
+ pn533_tx_frame_init(out_frame, PN533_CMD_IN_COMM_THRU);
+
+ break;
+
+ default:
+ nfc_dev_err(&dev->interface->dev,
+ "Unknown device type %d", dev->device_type);
+ return -EINVAL;
+ }
- pn533_tx_frame_init(out_frame, PN533_CMD_IN_DATA_EXCHANGE);
- tg = 1;
- memcpy(PN533_FRAME_CMD_PARAMS_PTR(out_frame), &tg, sizeof(u8));
- out_frame->datalen += sizeof(u8);
} else {
skb_push(skb, PN533_CMD_DATAEXCH_HEAD_LEN - 1);
out_frame = (struct pn533_frame *) skb->data;
@@ -2101,7 +2156,28 @@ static int pn533_set_configuration(struct pn533 *dev, u8 cfgitem, u8 *cfgdata,
return rc;
}
-struct nfc_ops pn533_nfc_ops = {
+static int pn533_fw_reset(struct pn533 *dev)
+{
+ int rc;
+ u8 *params;
+
+ nfc_dev_dbg(&dev->interface->dev, "%s", __func__);
+
+ pn533_tx_frame_init(dev->out_frame, 0x18);
+
+ params = PN533_FRAME_CMD_PARAMS_PTR(dev->out_frame);
+ params[0] = 0x1;
+ dev->out_frame->datalen += 1;
+
+ pn533_tx_frame_finish(dev->out_frame);
+
+ rc = pn533_send_cmd_frame_sync(dev, dev->out_frame, dev->in_frame,
+ dev->in_maxlen);
+
+ return rc;
+}
+
+static struct nfc_ops pn533_nfc_ops = {
.dev_up = NULL,
.dev_down = NULL,
.dep_link_up = pn533_dep_link_up,
@@ -2114,6 +2190,84 @@ struct nfc_ops pn533_nfc_ops = {
.tm_send = pn533_tm_send,
};
+static int pn533_setup(struct pn533 *dev)
+{
+ struct pn533_config_max_retries max_retries;
+ struct pn533_config_timing timing;
+ u8 pasori_cfg[3] = {0x08, 0x01, 0x08};
+ int rc;
+
+ switch (dev->device_type) {
+ case PN533_DEVICE_STD:
+ max_retries.mx_rty_atr = PN533_CONFIG_MAX_RETRIES_ENDLESS;
+ max_retries.mx_rty_psl = 2;
+ max_retries.mx_rty_passive_act =
+ PN533_CONFIG_MAX_RETRIES_NO_RETRY;
+
+ timing.rfu = PN533_CONFIG_TIMING_102;
+ timing.atr_res_timeout = PN533_CONFIG_TIMING_204;
+ timing.dep_timeout = PN533_CONFIG_TIMING_409;
+
+ break;
+
+ case PN533_DEVICE_PASORI:
+ max_retries.mx_rty_atr = 0x2;
+ max_retries.mx_rty_psl = 0x1;
+ max_retries.mx_rty_passive_act =
+ PN533_CONFIG_MAX_RETRIES_NO_RETRY;
+
+ timing.rfu = PN533_CONFIG_TIMING_102;
+ timing.atr_res_timeout = PN533_CONFIG_TIMING_102;
+ timing.dep_timeout = PN533_CONFIG_TIMING_204;
+
+ break;
+
+ default:
+ nfc_dev_err(&dev->interface->dev, "Unknown device type %d\n",
+ dev->device_type);
+ return -EINVAL;
+ }
+
+ rc = pn533_set_configuration(dev, PN533_CFGITEM_MAX_RETRIES,
+ (u8 *)&max_retries, sizeof(max_retries));
+ if (rc) {
+ nfc_dev_err(&dev->interface->dev,
+ "Error on setting MAX_RETRIES config");
+ return rc;
+ }
+
+
+ rc = pn533_set_configuration(dev, PN533_CFGITEM_TIMING,
+ (u8 *)&timing, sizeof(timing));
+ if (rc) {
+ nfc_dev_err(&dev->interface->dev,
+ "Error on setting RF timings");
+ return rc;
+ }
+
+ switch (dev->device_type) {
+ case PN533_DEVICE_STD:
+ break;
+
+ case PN533_DEVICE_PASORI:
+ pn533_fw_reset(dev);
+
+ rc = pn533_set_configuration(dev, PN533_CFGITEM_PASORI,
+ pasori_cfg, 3);
+ if (rc) {
+ nfc_dev_err(&dev->interface->dev,
+ "Error while settings PASORI config");
+ return rc;
+ }
+
+ pn533_fw_reset(dev);
+
+ break;
+ }
+
+ return 0;
+}
+
static int pn533_probe(struct usb_interface *interface,
const struct usb_device_id *id)
{
@@ -2121,8 +2275,6 @@ static int pn533_probe(struct usb_interface *interface,
struct pn533 *dev;
struct usb_host_interface *iface_desc;
struct usb_endpoint_descriptor *endpoint;
- struct pn533_config_max_retries max_retries;
- struct pn533_config_timing timing;
int in_endpoint = 0;
int out_endpoint = 0;
int rc = -ENOMEM;
@@ -2208,10 +2360,22 @@ static int pn533_probe(struct usb_interface *interface,
nfc_dev_info(&dev->interface->dev, "NXP PN533 firmware ver %d.%d now"
" attached", fw_ver->ver, fw_ver->rev);
- protocols = NFC_PROTO_JEWEL_MASK
- | NFC_PROTO_MIFARE_MASK | NFC_PROTO_FELICA_MASK
- | NFC_PROTO_ISO14443_MASK
- | NFC_PROTO_NFC_DEP_MASK;
+ dev->device_type = id->driver_info;
+ switch (dev->device_type) {
+ case PN533_DEVICE_STD:
+ protocols = PN533_ALL_PROTOCOLS;
+ break;
+
+ case PN533_DEVICE_PASORI:
+ protocols = PN533_NO_TYPE_B_PROTOCOLS;
+ break;
+
+ default:
+ nfc_dev_err(&dev->interface->dev, "Unknown device type %d\n",
+ dev->device_type);
+ rc = -EINVAL;
+ goto destroy_wq;
+ }
dev->nfc_dev = nfc_allocate_device(&pn533_nfc_ops, protocols,
PN533_CMD_DATAEXCH_HEAD_LEN,
@@ -2226,30 +2390,9 @@ static int pn533_probe(struct usb_interface *interface,
if (rc)
goto free_nfc_dev;
- max_retries.mx_rty_atr = PN533_CONFIG_MAX_RETRIES_ENDLESS;
- max_retries.mx_rty_psl = 2;
- max_retries.mx_rty_passive_act = PN533_CONFIG_MAX_RETRIES_NO_RETRY;
-
- rc = pn533_set_configuration(dev, PN533_CFGITEM_MAX_RETRIES,
- (u8 *) &max_retries, sizeof(max_retries));
-
- if (rc) {
- nfc_dev_err(&dev->interface->dev, "Error on setting MAX_RETRIES"
- " config");
- goto unregister_nfc_dev;
- }
-
- timing.rfu = PN533_CONFIG_TIMING_102;
- timing.atr_res_timeout = PN533_CONFIG_TIMING_204;
- timing.dep_timeout = PN533_CONFIG_TIMING_409;
-
- rc = pn533_set_configuration(dev, PN533_CFGITEM_TIMING,
- (u8 *) &timing, sizeof(timing));
- if (rc) {
- nfc_dev_err(&dev->interface->dev,
- "Error on setting RF timings");
+ rc = pn533_setup(dev);
+ if (rc)
goto unregister_nfc_dev;
- }
return 0;
--
1.7.10
next prev parent reply other threads:[~2012-07-06 20:00 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-06 20:09 [PATCH 00/33] NFC updates for 3.6 Samuel Ortiz
2012-07-06 20:09 ` [PATCH 01/33] NFC: Prepare asynchronous error management for driver and shdlc Samuel Ortiz
2012-07-06 20:09 ` [PATCH 02/33] NFC: Removed addressed shdlc TODOs Samuel Ortiz
2012-07-06 20:09 ` [PATCH 03/33] NFC: Handle SHDLC RSET frames from an SHDLC connected chip Samuel Ortiz
2012-07-06 20:09 ` [PATCH 04/33] NFC: Remove an impossible HCI error case Samuel Ortiz
2012-07-06 20:09 ` [PATCH 05/33] NFC: Implement HCP reaggregation allocation " Samuel Ortiz
2012-07-06 20:09 ` [PATCH 06/33] NFC: Changed HCI cmd execution completion result to std linux errno Samuel Ortiz
2012-07-06 20:09 ` [PATCH 07/33] NFC: Driver failure API Samuel Ortiz
2012-07-06 20:09 ` [PATCH 08/33] NFC: Factorize HCI cmd completion Samuel Ortiz
2012-07-06 20:09 ` [PATCH 09/33] NFC: Implement HCI driver or internal error management Samuel Ortiz
2012-07-06 20:09 ` [PATCH 10/33] NFC: Core must test the device polling state inside the device lock Samuel Ortiz
2012-07-06 20:09 ` [PATCH 11/33] NFC: nfc_targets_found() should accept zero target found Samuel Ortiz
2012-07-06 20:09 ` [PATCH 12/33] NFC: nfc_driver_failure() implementation Samuel Ortiz
2012-07-06 20:09 ` [PATCH 13/33] NFC: Error management documentation Samuel Ortiz
2012-07-06 20:09 ` [PATCH 14/33] NFC: update PN544 HCI driver state when opened/closed Samuel Ortiz
2012-07-06 20:09 ` [PATCH 15/33] NFC: Allow HCI driver to pre-open pipes to some gates Samuel Ortiz
2012-07-06 20:09 ` [PATCH 16/33] NFC: Add modules alias for NFC sockets Samuel Ortiz
2012-07-06 20:09 ` [PATCH 17/33] NFC: Add netlink module alias for NFC Samuel Ortiz
2012-07-06 20:09 ` [PATCH 18/33] NFC: Update LLCP socket target index when getting a connection Samuel Ortiz
2012-07-06 20:09 ` [PATCH 19/33] NFC: Fix LLCP getname socket op Samuel Ortiz
2012-07-06 20:09 ` [PATCH 20/33] NFC: Build LLCP general bytes upon request Samuel Ortiz
2012-07-06 20:09 ` [PATCH 21/33] NFC: Close listening LLCP sockets when the device is gone Samuel Ortiz
2012-07-06 20:09 ` [PATCH 22/33] NFC: Release LLCP SAP when the owner is released Samuel Ortiz
2012-07-06 20:09 ` [PATCH 23/33] NFC: Forbid LLCP service name reusing Samuel Ortiz
2012-07-06 20:09 ` [PATCH 24/33] NFC: Forbid SSAP binding to a not well known LLCP service Samuel Ortiz
2012-07-06 20:09 ` [PATCH 25/33] NFC: LLCP late binding Samuel Ortiz
2012-07-06 20:09 ` [PATCH 26/33] NFC: Handle LLCP Disconnected Mode frames Samuel Ortiz
2012-07-06 20:09 ` [PATCH 27/33] NFC: Remove warning from nfc_llcp_local_put Samuel Ortiz
2012-07-06 20:09 ` [PATCH 28/33] NFC: Do not return EBUSY when stopping a poll that's already stopped Samuel Ortiz
2012-07-06 20:09 ` [PATCH 29/33] NFC: Dereference LLCP bind socket address after checking for it to be NULL Samuel Ortiz
2012-07-06 20:09 ` Samuel Ortiz [this message]
2012-07-06 20:09 ` [PATCH 31/33] NFC: Use communicate thru only for PaSoRi when trying to read Felica tags Samuel Ortiz
2012-07-06 20:09 ` [PATCH 32/33] NFC: Add ISO 14443 type B protocol Samuel Ortiz
2012-07-06 20:09 ` [PATCH 33/33] NFC: Check for llcp_sock and its device from llcp_sock_getname Samuel Ortiz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1341605393-32056-31-git-send-email-sameo@linux.intel.com \
--to=sameo@linux.intel.com \
--cc=aloisio.almeida@openbossa.org \
--cc=ilane@ti.com \
--cc=lauro.venancio@openbossa.org \
--cc=linux-nfc@lists.01.org \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).