From: Gertjan van Wingerde <gwingerde@gmail.com>
To: <linux-wireless@vger.kernel.org>,
"John W. Linville" <linville@tuxdriver.com>
Cc: <users@rt2x00.serialmonkey.com>,
Ivo van Doorn <IvDoorn@gmail.com>,
Helmut Schaa <helmut.schaa@googlemail.com>,
Gertjan van Wingerde <gwingerde@gmail.com>
Subject: [PATCH v2 6/6] rt2x00: rt2800 - Make probe_hw function common between PCI and USB.
Date: Fri, 31 Aug 2012 19:22:14 +0200 [thread overview]
Message-ID: <1346433734-3337-7-git-send-email-gwingerde@gmail.com> (raw)
In-Reply-To: <1346433734-3337-6-git-send-email-gwingerde@gmail.com>
Refactor the probe_hw code so that more code can be shared between
rt2800pci and rt2800usb.
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index c3cae1d..2ad3b7a 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -44,6 +44,13 @@
#include "rt2800.h"
/*
+ * Allow hardware encryption to be disabled.
+ */
+static bool modparam_nohwcrypt = false;
+module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
+MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
+
+/*
* Register access.
* All access to the CSR registers will go through the methods
* rt2800_register_read and rt2800_register_write.
@@ -4391,7 +4398,7 @@ void rt2800_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev)
}
EXPORT_SYMBOL_GPL(rt2800_read_eeprom_efuse);
-int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev)
+static int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev)
{
struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
u16 word;
@@ -4399,6 +4406,11 @@ int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev)
u8 default_lna_gain;
/*
+ * Read the EEPROM.
+ */
+ rt2800_read_eeprom(rt2x00dev);
+
+ /*
* Start validation of the data that has been read.
*/
mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
@@ -4520,9 +4532,8 @@ int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev)
return 0;
}
-EXPORT_SYMBOL_GPL(rt2800_validate_eeprom);
-int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
+static int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
{
u32 reg;
u16 value;
@@ -4680,7 +4691,6 @@ int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
return 0;
}
-EXPORT_SYMBOL_GPL(rt2800_init_eeprom);
/*
* RF value list for rt28xx
@@ -4823,7 +4833,7 @@ static const struct rf_channel rf_vals_3x[] = {
{173, 0x61, 0, 9},
};
-int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
+static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
{
struct hw_mode_spec *spec = &rt2x00dev->spec;
struct channel_info *info;
@@ -4999,7 +5009,72 @@ int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
return 0;
}
-EXPORT_SYMBOL_GPL(rt2800_probe_hw_mode);
+
+int rt2800_probe_hw(struct rt2x00_dev *rt2x00dev)
+{
+ int retval;
+ u32 reg;
+
+ /*
+ * Allocate eeprom data.
+ */
+ retval = rt2800_validate_eeprom(rt2x00dev);
+ if (retval)
+ return retval;
+
+ retval = rt2800_init_eeprom(rt2x00dev);
+ if (retval)
+ return retval;
+
+ /*
+ * Enable rfkill polling by setting GPIO direction of the
+ * rfkill switch GPIO pin correctly.
+ */
+ rt2800_register_read(rt2x00dev, GPIO_CTRL, ®);
+ rt2x00_set_field32(®, GPIO_CTRL_DIR2, 1);
+ rt2800_register_write(rt2x00dev, GPIO_CTRL, reg);
+
+ /*
+ * Initialize hw specifications.
+ */
+ retval = rt2800_probe_hw_mode(rt2x00dev);
+ if (retval)
+ return retval;
+
+ /*
+ * Set device capabilities.
+ */
+ __set_bit(CAPABILITY_CONTROL_FILTERS, &rt2x00dev->cap_flags);
+ __set_bit(CAPABILITY_CONTROL_FILTER_PSPOLL, &rt2x00dev->cap_flags);
+ if (!rt2x00_is_usb(rt2x00dev))
+ __set_bit(CAPABILITY_PRE_TBTT_INTERRUPT, &rt2x00dev->cap_flags);
+
+ /*
+ * Set device requirements.
+ */
+ if (!rt2x00_is_soc(rt2x00dev))
+ __set_bit(REQUIRE_FIRMWARE, &rt2x00dev->cap_flags);
+ __set_bit(REQUIRE_L2PAD, &rt2x00dev->cap_flags);
+ __set_bit(REQUIRE_TXSTATUS_FIFO, &rt2x00dev->cap_flags);
+ if (!modparam_nohwcrypt)
+ __set_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags);
+ __set_bit(CAPABILITY_LINK_TUNING, &rt2x00dev->cap_flags);
+ __set_bit(REQUIRE_HT_TX_DESC, &rt2x00dev->cap_flags);
+ if (rt2x00_is_usb(rt2x00dev))
+ __set_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags);
+ else {
+ __set_bit(REQUIRE_DMA, &rt2x00dev->cap_flags);
+ __set_bit(REQUIRE_TASKLET_CONTEXT, &rt2x00dev->cap_flags);
+ }
+
+ /*
+ * Set the rssi offset.
+ */
+ rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rt2800_probe_hw);
/*
* IEEE80211 stack callback functions.
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.h b/drivers/net/wireless/rt2x00/rt2800lib.h
index 18a0b67..303e177 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.h
+++ b/drivers/net/wireless/rt2x00/rt2800lib.h
@@ -43,6 +43,8 @@ struct rt2800_ops {
const unsigned int offset,
const struct rt2x00_field32 field, u32 *reg);
+ void (*read_eeprom)(struct rt2x00_dev *rt2x00dev);
+
int (*drv_write_firmware)(struct rt2x00_dev *rt2x00dev,
const u8 *data, const size_t len);
int (*drv_init_registers)(struct rt2x00_dev *rt2x00dev);
@@ -114,6 +116,13 @@ static inline int rt2800_regbusy_read(struct rt2x00_dev *rt2x00dev,
return rt2800ops->regbusy_read(rt2x00dev, offset, field, reg);
}
+static inline void rt2800_read_eeprom(struct rt2x00_dev *rt2x00dev)
+{
+ const struct rt2800_ops *rt2800ops = rt2x00dev->ops->drv;
+
+ rt2800ops->read_eeprom(rt2x00dev);
+}
+
static inline int rt2800_drv_write_firmware(struct rt2x00_dev *rt2x00dev,
const u8 *data, const size_t len)
{
@@ -191,9 +200,8 @@ void rt2800_disable_radio(struct rt2x00_dev *rt2x00dev);
int rt2800_efuse_detect(struct rt2x00_dev *rt2x00dev);
void rt2800_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev);
-int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev);
-int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev);
-int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev);
+
+int rt2800_probe_hw(struct rt2x00_dev *rt2x00dev);
void rt2800_get_tkip_seq(struct ieee80211_hw *hw, u8 hw_key_idx, u32 *iv32,
u16 *iv16);
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index 0965540..abfc876 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -47,13 +47,6 @@
#include "rt2800.h"
#include "rt2800pci.h"
-/*
- * Allow hardware encryption to be disabled.
- */
-static bool modparam_nohwcrypt = false;
-module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
-MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
-
static void rt2800pci_mcu_status(struct rt2x00_dev *rt2x00dev, const u8 token)
{
unsigned int i;
@@ -965,85 +958,14 @@ static irqreturn_t rt2800pci_interrupt(int irq, void *dev_instance)
/*
* Device probe functions.
*/
-static int rt2800pci_validate_eeprom(struct rt2x00_dev *rt2x00dev)
+static void rt2800pci_read_eeprom(struct rt2x00_dev *rt2x00dev)
{
- /*
- * Read EEPROM into buffer
- */
if (rt2x00_is_soc(rt2x00dev))
rt2800pci_read_eeprom_soc(rt2x00dev);
else if (rt2800pci_efuse_detect(rt2x00dev))
rt2800pci_read_eeprom_efuse(rt2x00dev);
else
rt2800pci_read_eeprom_pci(rt2x00dev);
-
- return rt2800_validate_eeprom(rt2x00dev);
-}
-
-static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev)
-{
- int retval;
- u32 reg;
-
- /*
- * Allocate eeprom data.
- */
- retval = rt2800pci_validate_eeprom(rt2x00dev);
- if (retval)
- return retval;
-
- retval = rt2800_init_eeprom(rt2x00dev);
- if (retval)
- return retval;
-
- /*
- * Enable rfkill polling by setting GPIO direction of the
- * rfkill switch GPIO pin correctly.
- */
- rt2x00pci_register_read(rt2x00dev, GPIO_CTRL, ®);
- rt2x00_set_field32(®, GPIO_CTRL_DIR2, 1);
- rt2x00pci_register_write(rt2x00dev, GPIO_CTRL, reg);
-
- /*
- * Initialize hw specifications.
- */
- retval = rt2800_probe_hw_mode(rt2x00dev);
- if (retval)
- return retval;
-
- /*
- * This device has multiple filters for control frames
- * and has a separate filter for PS Poll frames.
- */
- __set_bit(CAPABILITY_CONTROL_FILTERS, &rt2x00dev->cap_flags);
- __set_bit(CAPABILITY_CONTROL_FILTER_PSPOLL, &rt2x00dev->cap_flags);
-
- /*
- * This device has a pre tbtt interrupt and thus fetches
- * a new beacon directly prior to transmission.
- */
- __set_bit(CAPABILITY_PRE_TBTT_INTERRUPT, &rt2x00dev->cap_flags);
-
- /*
- * This device requires firmware.
- */
- if (!rt2x00_is_soc(rt2x00dev))
- __set_bit(REQUIRE_FIRMWARE, &rt2x00dev->cap_flags);
- __set_bit(REQUIRE_DMA, &rt2x00dev->cap_flags);
- __set_bit(REQUIRE_L2PAD, &rt2x00dev->cap_flags);
- __set_bit(REQUIRE_TXSTATUS_FIFO, &rt2x00dev->cap_flags);
- __set_bit(REQUIRE_TASKLET_CONTEXT, &rt2x00dev->cap_flags);
- if (!modparam_nohwcrypt)
- __set_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags);
- __set_bit(CAPABILITY_LINK_TUNING, &rt2x00dev->cap_flags);
- __set_bit(REQUIRE_HT_TX_DESC, &rt2x00dev->cap_flags);
-
- /*
- * Set the rssi offset.
- */
- rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
-
- return 0;
}
static const struct ieee80211_ops rt2800pci_mac80211_ops = {
@@ -1081,6 +1003,7 @@ static const struct rt2800_ops rt2800pci_rt2800_ops = {
.register_multiread = rt2x00pci_register_multiread,
.register_multiwrite = rt2x00pci_register_multiwrite,
.regbusy_read = rt2x00pci_regbusy_read,
+ .read_eeprom = rt2800pci_read_eeprom,
.drv_write_firmware = rt2800pci_write_firmware,
.drv_init_registers = rt2800pci_init_registers,
.drv_get_txwi = rt2800pci_get_txwi,
@@ -1093,7 +1016,7 @@ static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = {
.tbtt_tasklet = rt2800pci_tbtt_tasklet,
.rxdone_tasklet = rt2800pci_rxdone_tasklet,
.autowake_tasklet = rt2800pci_autowake_tasklet,
- .probe_hw = rt2800pci_probe_hw,
+ .probe_hw = rt2800_probe_hw,
.get_firmware_name = rt2800pci_get_firmware_name,
.check_firmware = rt2800_check_firmware,
.load_firmware = rt2800_load_firmware,
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 5390632..dd0a41c 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -43,13 +43,6 @@
#include "rt2800usb.h"
/*
- * Allow hardware encryption to be disabled.
- */
-static bool modparam_nohwcrypt;
-module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
-MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
-
-/*
* Queue handlers.
*/
static void rt2800usb_start_queue(struct data_queue *queue)
@@ -722,73 +715,27 @@ static void rt2800usb_fill_rxdone(struct queue_entry *entry,
/*
* Device probe functions.
*/
-static int rt2800usb_validate_eeprom(struct rt2x00_dev *rt2x00dev)
+static void rt2800usb_read_eeprom(struct rt2x00_dev *rt2x00dev)
{
if (rt2800_efuse_detect(rt2x00dev))
rt2800_read_eeprom_efuse(rt2x00dev);
else
rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom,
EEPROM_SIZE);
-
- return rt2800_validate_eeprom(rt2x00dev);
}
static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev)
{
int retval;
- u32 reg;
- /*
- * Allocate eeprom data.
- */
- retval = rt2800usb_validate_eeprom(rt2x00dev);
+ retval = rt2800_probe_hw(rt2x00dev);
if (retval)
return retval;
- retval = rt2800_init_eeprom(rt2x00dev);
- if (retval)
- return retval;
-
- /*
- * Enable rfkill polling by setting GPIO direction of the
- * rfkill switch GPIO pin correctly.
- */
- rt2x00usb_register_read(rt2x00dev, GPIO_CTRL, ®);
- rt2x00_set_field32(®, GPIO_CTRL_DIR2, 1);
- rt2x00usb_register_write(rt2x00dev, GPIO_CTRL, reg);
-
- /*
- * Initialize hw specifications.
- */
- retval = rt2800_probe_hw_mode(rt2x00dev);
- if (retval)
- return retval;
-
- /*
- * This device has multiple filters for control frames
- * and has a separate filter for PS Poll frames.
- */
- __set_bit(CAPABILITY_CONTROL_FILTERS, &rt2x00dev->cap_flags);
- __set_bit(CAPABILITY_CONTROL_FILTER_PSPOLL, &rt2x00dev->cap_flags);
-
- /*
- * This device requires firmware.
- */
- __set_bit(REQUIRE_FIRMWARE, &rt2x00dev->cap_flags);
- __set_bit(REQUIRE_L2PAD, &rt2x00dev->cap_flags);
- if (!modparam_nohwcrypt)
- __set_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags);
- __set_bit(CAPABILITY_LINK_TUNING, &rt2x00dev->cap_flags);
- __set_bit(REQUIRE_HT_TX_DESC, &rt2x00dev->cap_flags);
- __set_bit(REQUIRE_TXSTATUS_FIFO, &rt2x00dev->cap_flags);
- __set_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags);
-
- rt2x00dev->txstatus_timer.function = rt2800usb_tx_sta_fifo_timeout,
-
/*
- * Set the rssi offset.
+ * Set txstatus timer function.
*/
- rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
+ rt2x00dev->txstatus_timer.function = rt2800usb_tx_sta_fifo_timeout;
/*
* Overwrite TX done handler
@@ -834,6 +781,7 @@ static const struct rt2800_ops rt2800usb_rt2800_ops = {
.register_multiread = rt2x00usb_register_multiread,
.register_multiwrite = rt2x00usb_register_multiwrite,
.regbusy_read = rt2x00usb_regbusy_read,
+ .read_eeprom = rt2800usb_read_eeprom,
.drv_write_firmware = rt2800usb_write_firmware,
.drv_init_registers = rt2800usb_init_registers,
.drv_get_txwi = rt2800usb_get_txwi,
--
1.7.11.1
next prev parent reply other threads:[~2012-08-31 17:22 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-31 17:22 [PATCH v2 0/6] GPIO related fixes and clean ups Gertjan van Wingerde
2012-08-31 17:22 ` [PATCH v2 1/6] rt2x00: Identify ASUS USB-N53 device Gertjan van Wingerde
2012-08-31 17:22 ` [PATCH v2 2/6] rt2x00: Fix word size of rt2500usb MAC_CSR19 register Gertjan van Wingerde
2012-08-31 17:22 ` [PATCH v2 3/6] rt2x00: Fix rfkill polling prior to interface start Gertjan van Wingerde
2012-08-31 17:22 ` [PATCH v2 4/6] rt2x00: Align GPIO register definitions with the datasheets Gertjan van Wingerde
2012-08-31 17:22 ` [PATCH v2 5/6] rt2x00: Unify GPIO register field namings Gertjan van Wingerde
2012-08-31 17:22 ` Gertjan van Wingerde [this message]
2012-09-02 20:44 ` [PATCH v2 6/6] rt2x00: rt2800 - Make probe_hw function common between PCI and USB Ivo Van Doorn
2012-09-03 1:23 ` Gertjan van Wingerde
2012-09-02 20:40 ` [PATCH v2 5/6] rt2x00: Unify GPIO register field namings Ivo Van Doorn
2012-09-02 20:39 ` [PATCH v2 4/6] rt2x00: Align GPIO register definitions with the datasheets Ivo Van Doorn
2012-09-02 20:39 ` [PATCH v2 3/6] rt2x00: Fix rfkill polling prior to interface start Ivo Van Doorn
2012-09-02 20:37 ` [PATCH v2 2/6] rt2x00: Fix word size of rt2500usb MAC_CSR19 register Ivo Van Doorn
2012-09-02 20:37 ` [PATCH v2 1/6] rt2x00: Identify ASUS USB-N53 device Ivo Van Doorn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1346433734-3337-7-git-send-email-gwingerde@gmail.com \
--to=gwingerde@gmail.com \
--cc=IvDoorn@gmail.com \
--cc=helmut.schaa@googlemail.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=users@rt2x00.serialmonkey.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).