From: Eliad Peller <eliad@wizery.com>
To: Luciano Coelho <coelho@ti.com>
Cc: <linux-wireless@vger.kernel.org>
Subject: [PATCH 08/15] wlcore: add chanctx implementation
Date: Mon, 19 Nov 2012 18:39:23 +0200 [thread overview]
Message-ID: <1353343170-26516-9-git-send-email-eliad@wizery.com> (raw)
In-Reply-To: <1353343170-26516-1-git-send-email-eliad@wizery.com>
Add some basic chanctx implementation.
Only add debug prints, and save the vif's channel/band/type.
Signed-off-by: Eliad Peller <eliad@wizery.com>
---
drivers/net/wireless/ti/wlcore/main.c | 66 +++++++++++++++++++++++++++++++++
1 files changed, 66 insertions(+), 0 deletions(-)
diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index 4f4a9e5..caafd8c 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -4150,6 +4150,67 @@ out:
mutex_unlock(&wl->mutex);
}
+static int wlcore_op_add_chanctx(struct ieee80211_hw *hw,
+ struct ieee80211_chanctx_conf *ctx)
+{
+ wl1271_debug(DEBUG_MAC80211, "mac80211 add chanctx %d (type %d)",
+ ieee80211_frequency_to_channel(ctx->channel->center_freq),
+ ctx->channel_type);
+ return 0;
+}
+
+static void wlcore_op_remove_chanctx(struct ieee80211_hw *hw,
+ struct ieee80211_chanctx_conf *ctx)
+{
+ wl1271_debug(DEBUG_MAC80211, "mac80211 remove chanctx %d (type %d)",
+ ieee80211_frequency_to_channel(ctx->channel->center_freq),
+ ctx->channel_type);
+}
+
+static void wlcore_op_change_chanctx(struct ieee80211_hw *hw,
+ struct ieee80211_chanctx_conf *ctx,
+ u32 changed)
+{
+ wl1271_debug(DEBUG_MAC80211,
+ "mac80211 change chanctx %d (type %d) changed 0x%x",
+ ieee80211_frequency_to_channel(ctx->channel->center_freq),
+ ctx->channel_type, changed);
+}
+
+static int wlcore_op_assign_vif_chanctx(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_chanctx_conf *ctx)
+{
+ struct wl1271 *wl = hw->priv;
+ struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif);
+ int channel = ieee80211_frequency_to_channel(
+ ctx->channel->center_freq);
+
+ wl1271_debug(DEBUG_MAC80211,
+ "mac80211 assign chanctx (role %d) %d (type %d)",
+ wlvif->role_id, channel, ctx->channel_type);
+
+ wlcore_tx_work_locked(wl);
+ wlvif->band = ctx->channel->band;
+ wlvif->channel = channel;
+ wlvif->channel_type = ctx->channel_type;
+
+ return 0;
+}
+
+static void wlcore_op_unassign_vif_chanctx(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_chanctx_conf *ctx)
+{
+ struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif);
+
+ wl1271_debug(DEBUG_MAC80211,
+ "mac80211 unassign chanctx (role %d) %d (type %d)",
+ wlvif->role_id,
+ ieee80211_frequency_to_channel(ctx->channel->center_freq),
+ ctx->channel_type);
+}
+
static int wl1271_op_conf_tx(struct ieee80211_hw *hw,
struct ieee80211_vif *vif, u16 queue,
const struct ieee80211_tx_queue_params *params)
@@ -4972,6 +5033,11 @@ static const struct ieee80211_ops wl1271_ops = {
.flush = wlcore_op_flush,
.remain_on_channel = wlcore_op_remain_on_channel,
.cancel_remain_on_channel = wlcore_op_cancel_remain_on_channel,
+ .add_chanctx = wlcore_op_add_chanctx,
+ .remove_chanctx = wlcore_op_remove_chanctx,
+ .change_chanctx = wlcore_op_change_chanctx,
+ .assign_vif_chanctx = wlcore_op_assign_vif_chanctx,
+ .unassign_vif_chanctx = wlcore_op_unassign_vif_chanctx,
CFG80211_TESTMODE_CMD(wl1271_tm_cmd)
};
--
1.7.6.401.g6a319
next prev parent reply other threads:[~2012-11-19 16:39 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-19 16:39 [PATCH 00/15] wlcore: prepare to multi-channel Eliad Peller
2012-11-19 16:39 ` [PATCH 01/15] wlcore: start sta role on CHANGED_BSSID Eliad Peller
2012-11-19 18:14 ` Luciano Coelho
2012-11-20 8:22 ` Eliad Peller
2012-11-19 16:39 ` [PATCH 02/15] wlcore: set ssid before starting station role Eliad Peller
2012-11-19 16:39 ` [PATCH 03/15] wlcore: always use sta.hlid Eliad Peller
2012-11-19 22:39 ` Julian Calaby
2012-11-20 8:46 ` Eliad Peller
2012-11-19 16:39 ` [PATCH 04/15] wlcore: workaround start_sta problem in wl12xx fw Eliad Peller
2012-11-19 16:39 ` [PATCH 05/15] wlcore: implement .remain_on_channel() callback Eliad Peller
2012-11-19 21:13 ` Arik Nemtsov
2012-11-20 8:33 ` Eliad Peller
2012-11-19 16:39 ` [PATCH 06/15] wlcore: use dev_hlid if the tx is offchannel Eliad Peller
2012-11-19 16:39 ` [PATCH 07/15] wlcore: get channel from bss_conf instead of hw->conf Eliad Peller
2012-11-19 16:39 ` Eliad Peller [this message]
2012-11-19 17:03 ` [PATCH 08/15] wlcore: add chanctx implementation Johannes Berg
2012-11-19 17:16 ` Eliad Peller
2012-11-19 17:36 ` Luciano Coelho
2012-11-19 17:48 ` Eliad Peller
2012-11-19 21:23 ` Arik Nemtsov
2012-11-20 8:38 ` Eliad Peller
2012-11-20 11:03 ` Arik Nemtsov
2012-11-20 11:42 ` Johannes Berg
2012-11-20 11:47 ` Eliad Peller
2012-11-19 16:39 ` [PATCH 09/15] wlcore: remove channel handling from op_config Eliad Peller
2012-11-19 21:26 ` Arik Nemtsov
2012-11-19 16:39 ` [PATCH 10/15] wlcore: initiate ROC/CROC on sta state updates Eliad Peller
2012-11-19 21:41 ` Arik Nemtsov
2012-11-20 8:42 ` Eliad Peller
2012-11-20 10:25 ` Arik Nemtsov
2012-11-19 16:39 ` [PATCH 11/15] wlcore: set active psm on association Eliad Peller
2012-11-20 7:39 ` Luciano Coelho
2012-11-20 9:06 ` Eliad Peller
2012-11-19 16:39 ` [PATCH 12/15] wlcore: specify correct supported_rates Eliad Peller
2012-11-20 7:55 ` Luciano Coelho
2012-11-20 9:11 ` Eliad Peller
2012-11-19 16:39 ` [PATCH 13/15] wlcore: reconfigure rate policy on association Eliad Peller
2012-11-20 8:13 ` Luciano Coelho
2012-11-20 9:14 ` Eliad Peller
2012-11-19 16:39 ` [PATCH 14/15] wlcore: refactor CHANGED_HT handling Eliad Peller
2012-11-19 16:39 ` [PATCH 15/15] wlcore: configure the remote rates with our own rates Eliad Peller
2012-11-20 8:18 ` Luciano Coelho
2012-11-20 9:21 ` Eliad Peller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1353343170-26516-9-git-send-email-eliad@wizery.com \
--to=eliad@wizery.com \
--cc=coelho@ti.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox