linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Johannes Berg <johannes@sipsolutions.net>
To: Saravana <saravanad@posedge.com>
Cc: linux-wireless@vger.kernel.org
Subject: Re: [RFC] mac80211: add debugfs file for last ack signal
Date: Wed, 28 Nov 2012 13:33:36 +0100	[thread overview]
Message-ID: <1354106016.9345.4.camel@jlt4.sipsolutions.net> (raw)
In-Reply-To: <50B5CA15.2080407@posedge.com>

On Wed, 2012-11-28 at 13:53 +0530, Saravana wrote:
> Add a debugfs file showing the signal strength
> of the ack frame that is received for the
> currently sent tx packet
> 
> Signed-off-by: Saravana <saravanad@posedge.com>
> ---
>  net/mac80211/debugfs_sta.c |    2 ++
>  net/mac80211/sta_info.h    |    2 ++
>  net/mac80211/status.c      |    2 ++
>  3 files changed, 6 insertions(+), 0 deletions(-)
> 
> diff --git a/net/mac80211/debugfs_sta.c b/net/mac80211/debugfs_sta.c
> index 89281d2..1566941 100644
> --- a/net/mac80211/debugfs_sta.c
> +++ b/net/mac80211/debugfs_sta.c
> @@ -53,6 +53,7 @@ static const struct file_operations sta_ ##name## _ops = {		\
>  STA_FILE(aid, sta.aid, D);
>  STA_FILE(dev, sdata->name, S);
>  STA_FILE(last_signal, last_signal, D);
> +STA_FILE(last_ack_signal, last_ack_signal, D);
>  
>  static ssize_t sta_flags_read(struct file *file, char __user *userbuf,
>  			      size_t count, loff_t *ppos)
> @@ -369,6 +370,7 @@ void ieee80211_sta_debugfs_add(struct sta_info *sta)
>  	DEBUGFS_ADD(dev);
>  	DEBUGFS_ADD(last_signal);
>  	DEBUGFS_ADD(ht_capa);
> +	DEBUGFS_ADD(last_ack_signal);
>  
>  	DEBUGFS_ADD_COUNTER(rx_packets, rx_packets);
>  	DEBUGFS_ADD_COUNTER(tx_packets, tx_packets);
> diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h
> index 6835cea..dce7693 100644
> --- a/net/mac80211/sta_info.h
> +++ b/net/mac80211/sta_info.h
> @@ -250,6 +250,7 @@ struct sta_ampdu_mlme {
>   * @rx_dropped: number of dropped MPDUs from this STA
>   * @last_signal: signal of last received frame from this STA
>   * @avg_signal: moving average of signal of received frames from this STA
> + * @last_ack_signal: signal of last received Ack frame from this STA
>   * @last_seq_ctrl: last received seq/frag number from this STA (per RX queue)
>   * @tx_filtered_count: number of frames the hardware filtered for this STA
>   * @tx_retry_failed: number of frames that failed retry
> @@ -329,6 +330,7 @@ struct sta_info {
>  	unsigned long rx_dropped;
>  	int last_signal;
>  	struct ewma avg_signal;
> +	int last_ack_signal;
>  	/* Plus 1 for non-QoS frames */
>  	__le16 last_seq_ctrl[IEEE80211_NUM_TIDS + 1];
>  
> diff --git a/net/mac80211/status.c b/net/mac80211/status.c
> index 2d931ad..64dda41 100644
> --- a/net/mac80211/status.c
> +++ b/net/mac80211/status.c
> @@ -539,6 +539,8 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb)
>  				sta->lost_packets = 0;
>  			}
>  		}
> +		if (acked)
> +			sta->last_ack_signal = info->status.ack_signal;

I'd prefer a blank line before the if

This patch was sent in a way that I could apply it. :-)

johannes


  reply	other threads:[~2012-11-28 12:33 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-11-28  8:23 [RFC] mac80211: add debugfs file for last ack signal Saravana
2012-11-28 12:33 ` Johannes Berg [this message]
2012-11-28 12:38   ` Saravana
  -- strict thread matches above, loose matches on Subject: below --
2012-11-28 12:48 Saravana
2012-11-28 12:54 ` Johannes Berg
2012-11-26 13:57 saravanad
2012-11-26 15:15 ` Johannes Berg
2012-11-28  7:08   ` Saravana

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1354106016.9345.4.camel@jlt4.sipsolutions.net \
    --to=johannes@sipsolutions.net \
    --cc=linux-wireless@vger.kernel.org \
    --cc=saravanad@posedge.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).