From: Sujith Manoharan <sujith@msujith.org>
To: John Linville <linville@tuxdriver.com>
Cc: linux-wireless@vger.kernel.org
Subject: [PATCH 3/3] ath9k_hw: Remove TEMP_COMP_CAL
Date: Thu, 3 Jan 2013 12:21:23 +0530 [thread overview]
Message-ID: <1357195883-8516-3-git-send-email-sujith@msujith.org> (raw)
In-Reply-To: <1357195883-8516-1-git-send-email-sujith@msujith.org>
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
This is not enabled for any chip and is unused.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
drivers/net/wireless/ath/ath9k/ar9003_calib.c | 20 +++-----------------
drivers/net/wireless/ath/ath9k/hw.h | 1 -
2 files changed, 3 insertions(+), 18 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
index 303e40d..fa67e84 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -32,7 +32,6 @@ struct coeff {
enum ar9003_cal_types {
IQ_MISMATCH_CAL = BIT(0),
- TEMP_COMP_CAL = BIT(1),
};
static void ar9003_hw_setup_calibration(struct ath_hw *ah,
@@ -49,7 +48,7 @@ static void ar9003_hw_setup_calibration(struct ath_hw *ah,
*/
REG_RMW_FIELD(ah, AR_PHY_TIMING4,
AR_PHY_TIMING4_IQCAL_LOG_COUNT_MAX,
- currCal->calData->calCountMax);
+ currCal->calData->calCountMax);
REG_WRITE(ah, AR_PHY_CALMODE, AR_PHY_CALMODE_IQ);
ath_dbg(common, CALIBRATE,
@@ -58,14 +57,8 @@ static void ar9003_hw_setup_calibration(struct ath_hw *ah,
/* Kick-off cal */
REG_SET_BIT(ah, AR_PHY_TIMING4, AR_PHY_TIMING4_DO_CAL);
break;
- case TEMP_COMP_CAL:
- REG_RMW_FIELD(ah, AR_PHY_65NM_CH0_THERM,
- AR_PHY_65NM_CH0_THERM_LOCAL, 1);
- REG_RMW_FIELD(ah, AR_PHY_65NM_CH0_THERM,
- AR_PHY_65NM_CH0_THERM_START, 1);
-
- ath_dbg(common, CALIBRATE,
- "starting Temperature Compensation Calibration\n");
+ default:
+ ath_err(common, "Invalid calibration type\n");
break;
}
}
@@ -1144,13 +1137,6 @@ skip_tx_iqcal:
INSERT_CAL(ah, &ah->iq_caldata);
ath_dbg(common, CALIBRATE, "enabling IQ Calibration\n");
- if (ah->supp_cals & TEMP_COMP_CAL) {
- INIT_CAL(&ah->tempCompCalData);
- INSERT_CAL(ah, &ah->tempCompCalData);
- ath_dbg(common, CALIBRATE,
- "enabling Temperature Compensation Calibration\n");
- }
-
/* Initialize current pointer to first element in list */
ah->cal_list_curr = ah->cal_list;
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 7f1a8e9..809599c 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -771,7 +771,6 @@ struct ath_hw {
struct ath9k_cal_list iq_caldata;
struct ath9k_cal_list adcgain_caldata;
struct ath9k_cal_list adcdc_caldata;
- struct ath9k_cal_list tempCompCalData;
struct ath9k_cal_list *cal_list;
struct ath9k_cal_list *cal_list_last;
struct ath9k_cal_list *cal_list_curr;
--
1.8.1
prev parent reply other threads:[~2013-01-03 6:52 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-03 6:51 [PATCH 1/3] ath9k_hw: Enable calibration types in init_cal_settings Sujith Manoharan
2013-01-03 6:51 ` [PATCH 2/3] ath9k_hw: Fix calibration for AR9340 Sujith Manoharan
2013-01-03 8:18 ` Schrober
2013-01-03 9:25 ` Sujith Manoharan
2013-01-03 6:51 ` Sujith Manoharan [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1357195883-8516-3-git-send-email-sujith@msujith.org \
--to=sujith@msujith.org \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox