From: Oleksij Rempel <linux@rempel-privat.de>
To: ath9k-devel@lists.ath9k.org, linux-wireless@vger.kernel.org
Cc: Oleksij Rempel <linux@rempel-privat.de>
Subject: [PATCH v2] ath9k_htc: add STBC TX support
Date: Sat, 4 May 2013 09:33:06 +0200 [thread overview]
Message-ID: <1367652786-6282-1-git-send-email-linux@rempel-privat.de> (raw)
In-Reply-To: <CAJ-Vmo=XYK=Jkc40U_vJO03n+tiA_LDpw8e1QKYRX6-+E9o4fA@mail.gmail.com>
current firmware will enable STBC_TX, only if other peer support it.
This patch provide ht_peer_caps to firmware.
FW versions 1.3, 1.4 should be able to work with it.
Tested on ar7010+ar9280 and ar7010+ar9287.
- v2. Use one bit instead of two for RX STBC flags.
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
---
drivers/net/wireless/ath/ath9k/htc.h | 3 +++
drivers/net/wireless/ath/ath9k/htc_drv_init.c | 3 +++
drivers/net/wireless/ath/ath9k/htc_drv_main.c | 4 ++++
3 files changed, 10 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/htc.h b/drivers/net/wireless/ath/ath9k/htc.h
index d3b099d..037e9b8 100644
--- a/drivers/net/wireless/ath/ath9k/htc.h
+++ b/drivers/net/wireless/ath/ath9k/htc.h
@@ -142,6 +142,9 @@ struct ath9k_htc_target_aggr {
#define WLAN_RC_40_FLAG 0x02
#define WLAN_RC_SGI_FLAG 0x04
#define WLAN_RC_HT_FLAG 0x08
+#define WLAN_RC_TX_STBC_FLAG 0x20 /* TX STBC */
+/* RX STBC. Warning! FW checks for 0xC0. But we support only 1 stream anyway */
+#define WLAN_RC_RX_STBC_FLAG 0x40
struct ath9k_htc_rateset {
u8 rs_nrates;
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
index a47f5e0..c79c5ac 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
@@ -517,6 +517,9 @@ static void setup_ht_cap(struct ath9k_htc_priv *priv,
ath_dbg(common, CONFIG, "TX streams %d, RX streams: %d\n",
tx_streams, rx_streams);
+ if (tx_streams >= 2)
+ ht_info->cap |= IEEE80211_HT_CAP_TX_STBC;
+
if (tx_streams != rx_streams) {
ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_RX_DIFF;
ht_info->mcs.tx_params |= ((tx_streams - 1) <<
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
index 0743a47..af08b4a 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
@@ -623,6 +623,10 @@ static void ath9k_htc_setup_rate(struct ath9k_htc_priv *priv,
trate->rates.ht_rates.rs_nrates = j;
caps = WLAN_RC_HT_FLAG;
+ if (sta->ht_cap.cap & IEEE80211_HT_CAP_RX_STBC)
+ caps |= WLAN_RC_RX_STBC_FLAG;
+ if (sta->ht_cap.cap & IEEE80211_HT_CAP_TX_STBC)
+ caps |= WLAN_RC_TX_STBC_FLAG;
if (sta->ht_cap.mcs.rx_mask[1])
caps |= WLAN_RC_DS_FLAG;
if ((sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) &&
--
1.8.1.2
next prev parent reply other threads:[~2013-05-04 7:33 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-02 8:11 [PATCH 0/2] work sync Oleksij Rempel
2013-05-02 8:11 ` [PATCH 1/2] ath9k_htc: add STBC TX support Oleksij Rempel
2013-05-02 16:55 ` Adrian Chadd
2013-05-02 17:32 ` Oleksij Rempel
2013-05-02 18:01 ` [ath9k-devel] " Felix Fietkau
2013-05-02 20:15 ` Adrian Chadd
2013-05-04 6:50 ` Oleksij Rempel
2013-05-04 6:55 ` Oleksij Rempel
2013-05-04 10:02 ` Felix Fietkau
2013-05-04 11:08 ` Oleksij Rempel
2013-05-04 11:16 ` Felix Fietkau
2013-05-04 11:28 ` Oleksij Rempel
2013-05-04 14:49 ` Adrian Chadd
2013-05-04 17:50 ` Adrian Chadd
2013-05-04 18:29 ` Oleksij Rempel
2013-05-04 7:33 ` Oleksij Rempel [this message]
2013-05-04 10:59 ` [PATCH] " Oleksij Rempel
2013-05-04 11:32 ` [PATCH v4] " Oleksij Rempel
2013-05-02 20:32 ` [ath9k-devel] [PATCH 1/2] " Oleksij Rempel
2013-05-02 8:11 ` [PATCH 2/2] ath9k: remove useless flag conversation Oleksij Rempel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1367652786-6282-1-git-send-email-linux@rempel-privat.de \
--to=linux@rempel-privat.de \
--cc=ath9k-devel@lists.ath9k.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).