From: Eliad Peller <eliad@wizery.com>
To: Luciano Coelho <coelho@ti.com>
Cc: <linux-wireless@vger.kernel.org>
Subject: [PATCH 1/4] wlcore: set default_wep_key when configured
Date: Sun, 12 May 2013 12:35:28 +0300 [thread overview]
Message-ID: <1368351331-6914-1-git-send-email-eliad@wizery.com> (raw)
From: Yoni Divinsky <yoni.divinsky@ti.com>
When associating to an AP with WEP set the
default key upon association by implementing
the set_deafult_key_idx op.
Fixes auto-arp sent with wrong key_idx bug.
Signed-off-by: Yoni Divinsky <yoni.divinsky@ti.com>
Signed-off-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
---
drivers/net/wireless/ti/wlcore/main.c | 49 +++++++++++++++++++++++++++++------
drivers/net/wireless/ti/wlcore/tx.c | 2 +-
2 files changed, 42 insertions(+), 9 deletions(-)
diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index a018221..c384bad 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -3196,14 +3196,6 @@ static int wl1271_set_key(struct wl1271 *wl, struct wl12xx_vif *wlvif,
if (ret < 0)
return ret;
- /* the default WEP key needs to be configured at least once */
- if (key_type == KEY_WEP) {
- ret = wl12xx_cmd_set_default_wep_key(wl,
- wlvif->default_key,
- wlvif->sta.hlid);
- if (ret < 0)
- return ret;
- }
}
return 0;
@@ -3360,6 +3352,46 @@ int wlcore_set_key(struct wl1271 *wl, enum set_key_cmd cmd,
}
EXPORT_SYMBOL_GPL(wlcore_set_key);
+static void wl1271_op_set_default_key_idx(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ int key_idx)
+{
+ struct wl1271 *wl = hw->priv;
+ struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif);
+ int ret;
+
+ wl1271_debug(DEBUG_MAC80211, "mac80211 set default key idx %d",
+ key_idx);
+
+ mutex_lock(&wl->mutex);
+
+ if (unlikely(wl->state != WLCORE_STATE_ON)) {
+ ret = -EAGAIN;
+ goto out_unlock;
+ }
+
+ ret = wl1271_ps_elp_wakeup(wl);
+ if (ret < 0)
+ goto out_unlock;
+
+ wlvif->default_key = key_idx;
+
+ /* the default WEP key needs to be configured at least once */
+ if (wlvif->encryption_type == KEY_WEP) {
+ ret = wl12xx_cmd_set_default_wep_key(wl,
+ key_idx,
+ wlvif->sta.hlid);
+ if (ret < 0)
+ goto out_sleep;
+ }
+
+out_sleep:
+ wl1271_ps_elp_sleep(wl);
+
+out_unlock:
+ mutex_unlock(&wl->mutex);
+}
+
void wlcore_regdomain_config(struct wl1271 *wl)
{
int ret;
@@ -5352,6 +5384,7 @@ static const struct ieee80211_ops wl1271_ops = {
.ampdu_action = wl1271_op_ampdu_action,
.tx_frames_pending = wl1271_tx_frames_pending,
.set_bitrate_mask = wl12xx_set_bitrate_mask,
+ .set_default_unicast_key = wl1271_op_set_default_key_idx,
.channel_switch = wl12xx_op_channel_switch,
.flush = wlcore_op_flush,
.remain_on_channel = wlcore_op_remain_on_channel,
diff --git a/drivers/net/wireless/ti/wlcore/tx.c b/drivers/net/wireless/ti/wlcore/tx.c
index 004d02e..7e93fe6 100644
--- a/drivers/net/wireless/ti/wlcore/tx.c
+++ b/drivers/net/wireless/ti/wlcore/tx.c
@@ -386,7 +386,7 @@ static int wl1271_prepare_tx_frame(struct wl1271 *wl, struct wl12xx_vif *wlvif,
is_wep = (cipher == WLAN_CIPHER_SUITE_WEP40) ||
(cipher == WLAN_CIPHER_SUITE_WEP104);
- if (unlikely(is_wep && wlvif->default_key != idx)) {
+ if (WARN_ON(is_wep && wlvif->default_key != idx)) {
ret = wl1271_set_default_wep_key(wl, wlvif, idx);
if (ret < 0)
return ret;
--
1.8.1.2
next reply other threads:[~2013-05-12 9:35 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-12 9:35 Eliad Peller [this message]
2013-05-12 9:35 ` [PATCH 2/4] wlcore: cancel channel switch work on interface removal Eliad Peller
2013-05-12 9:35 ` [PATCH 3/4] wlcore: hold jiffies in unsigned long Eliad Peller
2013-05-12 9:35 ` [PATCH 4/4] wlcore: fix occasional AP TX stop after recovery Eliad Peller
2013-06-17 9:14 ` [PATCH 1/4] wlcore: set default_wep_key when configured Luciano Coelho
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1368351331-6914-1-git-send-email-eliad@wizery.com \
--to=eliad@wizery.com \
--cc=coelho@ti.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox