From: Bing Zhao <bzhao@marvell.com>
To: <linux-wireless@vger.kernel.org>
Cc: "John W. Linville" <linville@tuxdriver.com>,
Amitkumar Karwar <akarwar@marvell.com>,
Avinash Patil <patila@marvell.com>,
Yogesh Ashok Powar <yogeshp@marvell.com>,
Nishant Sarmukadam <nishants@marvell.com>,
Frank Huang <frankh@marvell.com>, Bing Zhao <bzhao@marvell.com>
Subject: [PATCH v2 15/17] mwifiex: remove unnecessary macros in sdio.h
Date: Fri, 17 May 2013 17:54:42 -0700 [thread overview]
Message-ID: <1368838482-342-1-git-send-email-bzhao@marvell.com> (raw)
From: Amitkumar Karwar <akarwar@marvell.com>
They are not used in the code.
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
---
drivers/net/wireless/mwifiex/sdio.h | 51 -------------------------------------
1 file changed, 51 deletions(-)
diff --git a/drivers/net/wireless/mwifiex/sdio.h b/drivers/net/wireless/mwifiex/sdio.h
index e4016d2..339608b 100644
--- a/drivers/net/wireless/mwifiex/sdio.h
+++ b/drivers/net/wireless/mwifiex/sdio.h
@@ -66,14 +66,8 @@
/* Host Control Registers : Configuration */
#define CONFIGURATION_REG 0x00
-/* Host Control Registers : Host without Command 53 finish host*/
-#define HOST_TO_CARD_EVENT (0x1U << 3)
-/* Host Control Registers : Host without Command 53 finish host */
-#define HOST_WO_CMD53_FINISH_HOST (0x1U << 2)
/* Host Control Registers : Host power up */
#define HOST_POWER_UP (0x1U << 1)
-/* Host Control Registers : Host power down */
-#define HOST_POWER_DOWN (0x1U << 0)
/* Host Control Registers : Host interrupt mask */
#define HOST_INT_MASK_REG 0x02
@@ -93,60 +87,15 @@
/* Host Control Registers : Host interrupt RSR */
#define HOST_INT_RSR_REG 0x01
-/* Host Control Registers : Upload host interrupt RSR */
-#define UP_LD_HOST_INT_RSR (0x1U)
/* Host Control Registers : Host interrupt status */
#define HOST_INT_STATUS_REG 0x28
-/* Host Control Registers : Upload CRC error */
-#define UP_LD_CRC_ERR (0x1U << 2)
-/* Host Control Registers : Upload restart */
-#define UP_LD_RESTART (0x1U << 1)
-/* Host Control Registers : Download restart */
-#define DN_LD_RESTART (0x1U << 0)
/* Card Control Registers : Card I/O ready */
#define CARD_IO_READY (0x1U << 3)
-/* Card Control Registers : CIS card ready */
-#define CIS_CARD_RDY (0x1U << 2)
-/* Card Control Registers : Upload card ready */
-#define UP_LD_CARD_RDY (0x1U << 1)
/* Card Control Registers : Download card ready */
#define DN_LD_CARD_RDY (0x1U << 0)
-/* Card Control Registers : Host interrupt mask register */
-#define HOST_INTERRUPT_MASK_REG 0x34
-/* Card Control Registers : Host power interrupt mask */
-#define HOST_POWER_INT_MASK (0x1U << 3)
-/* Card Control Registers : Abort card interrupt mask */
-#define ABORT_CARD_INT_MASK (0x1U << 2)
-/* Card Control Registers : Upload card interrupt mask */
-#define UP_LD_CARD_INT_MASK (0x1U << 1)
-/* Card Control Registers : Download card interrupt mask */
-#define DN_LD_CARD_INT_MASK (0x1U << 0)
-
-/* Card Control Registers : Card interrupt status register */
-#define CARD_INTERRUPT_STATUS_REG 0x38
-/* Card Control Registers : Power up interrupt */
-#define POWER_UP_INT (0x1U << 4)
-/* Card Control Registers : Power down interrupt */
-#define POWER_DOWN_INT (0x1U << 3)
-
-/* Card Control Registers : Card interrupt RSR register */
-#define CARD_INTERRUPT_RSR_REG 0x3c
-/* Card Control Registers : Power up RSR */
-#define POWER_UP_RSR (0x1U << 4)
-/* Card Control Registers : Power down RSR */
-#define POWER_DOWN_RSR (0x1U << 3)
-
-/* Host F1 card ready */
-#define HOST_F1_CARD_RDY 0x0020
-
-/* Rx length register */
-#define CARD_RX_LEN_REG 0x62
-/* Rx unit register */
-#define CARD_RX_UNIT_REG 0x63
-
/* Max retry number of CMD53 write */
#define MAX_WRITE_IOMEM_RETRY 2
--
1.8.2.3
reply other threads:[~2013-05-18 0:55 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1368838482-342-1-git-send-email-bzhao@marvell.com \
--to=bzhao@marvell.com \
--cc=akarwar@marvell.com \
--cc=frankh@marvell.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=nishants@marvell.com \
--cc=patila@marvell.com \
--cc=yogeshp@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox