From: Felix Fietkau <nbd@openwrt.org>
To: linux-wireless@vger.kernel.org
Cc: linville@tuxdriver.com, mcgrof@qca.qualcomm.com
Subject: [PATCH 3.10 3/3] ath9k_hw: improve performance for AR934x v1.3+
Date: Thu, 23 May 2013 12:20:56 +0200 [thread overview]
Message-ID: <1369304456-74526-3-git-send-email-nbd@openwrt.org> (raw)
In-Reply-To: <1369304456-74526-1-git-send-email-nbd@openwrt.org>
AR934x v1.3 no longer needs the DCU backoff reduction workaround for
preventing rx overruns, but in turn needs the number of usable Tx
buffers to be reduced slightly.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
drivers/net/wireless/ath/ath9k/hw.c | 15 ++++++++++-----
drivers/net/wireless/ath/ath9k/mac.c | 2 +-
drivers/net/wireless/ath/ath9k/reg.h | 9 +++++++++
3 files changed, 20 insertions(+), 6 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 40331f4..2caf7de 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1172,6 +1172,7 @@ u32 ath9k_regd_get_ctl(struct ath_regulatory *reg, struct ath9k_channel *chan)
static inline void ath9k_hw_set_dma(struct ath_hw *ah)
{
struct ath_common *common = ath9k_hw_common(ah);
+ int txbuf_size;
ENABLE_REGWRITE_BUFFER(ah);
@@ -1225,13 +1226,17 @@ static inline void ath9k_hw_set_dma(struct ath_hw *ah)
* So set the usable tx buf size also to half to
* avoid data/delimiter underruns
*/
- REG_WRITE(ah, AR_PCU_TXBUF_CTRL,
- AR_9285_PCU_TXBUF_CTRL_USABLE_SIZE);
- } else if (!AR_SREV_9271(ah)) {
- REG_WRITE(ah, AR_PCU_TXBUF_CTRL,
- AR_PCU_TXBUF_CTRL_USABLE_SIZE);
+ txbuf_size = AR_9285_PCU_TXBUF_CTRL_USABLE_SIZE;
+ } else if (AR_SREV_9340_13_OR_LATER(ah)) {
+ /* Uses fewer entries for AR934x v1.3+ to prevent rx overruns */
+ txbuf_size = AR_9340_PCU_TXBUF_CTRL_USABLE_SIZE;
+ } else {
+ txbuf_size = AR_PCU_TXBUF_CTRL_USABLE_SIZE;
}
+ if (!AR_SREV_9271(ah))
+ REG_WRITE(ah, AR_PCU_TXBUF_CTRL, txbuf_size);
+
REGWRITE_BUFFER_FLUSH(ah);
if (AR_SREV_9300_20_OR_LATER(ah))
diff --git a/drivers/net/wireless/ath/ath9k/mac.c b/drivers/net/wireless/ath/ath9k/mac.c
index 498fee0..566109a 100644
--- a/drivers/net/wireless/ath/ath9k/mac.c
+++ b/drivers/net/wireless/ath/ath9k/mac.c
@@ -410,7 +410,7 @@ bool ath9k_hw_resettxqueue(struct ath_hw *ah, u32 q)
REG_WRITE(ah, AR_QMISC(q), AR_Q_MISC_DCU_EARLY_TERM_REQ);
- if (AR_SREV_9340(ah))
+ if (AR_SREV_9340(ah) && !AR_SREV_9340_13_OR_LATER(ah))
REG_WRITE(ah, AR_DMISC(q),
AR_D_MISC_CW_BKOFF_EN | AR_D_MISC_FRAG_WAIT_EN | 0x1);
else
diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h
index 9c056a8..f7c90cc 100644
--- a/drivers/net/wireless/ath/ath9k/reg.h
+++ b/drivers/net/wireless/ath/ath9k/reg.h
@@ -798,6 +798,10 @@
#define AR_SREV_REVISION_9485_10 0
#define AR_SREV_REVISION_9485_11 1
#define AR_SREV_VERSION_9340 0x300
+#define AR_SREV_REVISION_9340_10 0
+#define AR_SREV_REVISION_9340_11 1
+#define AR_SREV_REVISION_9340_12 2
+#define AR_SREV_REVISION_9340_13 3
#define AR_SREV_VERSION_9580 0x1C0
#define AR_SREV_REVISION_9580_10 4 /* AR9580 1.0 */
#define AR_SREV_VERSION_9462 0x280
@@ -897,6 +901,10 @@
#define AR_SREV_9340(_ah) \
(((_ah)->hw_version.macVersion == AR_SREV_VERSION_9340))
+#define AR_SREV_9340_13_OR_LATER(_ah) \
+ (AR_SREV_9340((_ah)) && \
+ ((_ah)->hw_version.macRev >= AR_SREV_REVISION_9340_13))
+
#define AR_SREV_9285E_20(_ah) \
(AR_SREV_9285_12_OR_LATER(_ah) && \
((REG_READ(_ah, AR_AN_SYNTH9) & 0x7) == 0x1))
@@ -1883,6 +1891,7 @@ enum {
#define AR_PCU_TXBUF_CTRL_SIZE_MASK 0x7FF
#define AR_PCU_TXBUF_CTRL_USABLE_SIZE 0x700
#define AR_9285_PCU_TXBUF_CTRL_USABLE_SIZE 0x380
+#define AR_9340_PCU_TXBUF_CTRL_USABLE_SIZE 0x500
#define AR_PCU_MISC_MODE2 0x8344
#define AR_PCU_MISC_MODE2_MGMT_CRYPTO_ENABLE 0x00000002
--
1.8.0.2
prev parent reply other threads:[~2013-05-23 10:21 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-23 10:20 [PATCH 3.10 1/3] ath9k_hw: fix spur mitigation issues on AR934x Felix Fietkau
2013-05-23 10:20 ` [PATCH 3.10 2/3] ath9k_hw: fix host interface reset " Felix Fietkau
2013-05-23 10:20 ` Felix Fietkau [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1369304456-74526-3-git-send-email-nbd@openwrt.org \
--to=nbd@openwrt.org \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=mcgrof@qca.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox