From: Solomon Peachy <pizza@shaftnet.org>
To: linux-wireless@vger.kernel.org
Cc: Solomon Peachy <pizza@shaftnet.org>
Subject: [PATCH -next 2/2] cw1200: rename the cw1200 platform definition header
Date: Sun, 2 Jun 2013 11:35:32 -0400 [thread overview]
Message-ID: <1370187332-18813-2-git-send-email-pizza@shaftnet.org> (raw)
In-Reply-To: <1370187332-18813-1-git-send-email-pizza@shaftnet.org>
My previous patch just moved the file, but it also needed to be renamed
to conform to proper conventions.
Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
---
drivers/net/wireless/cw1200/cw1200_sdio.c | 2 +-
drivers/net/wireless/cw1200/cw1200_spi.c | 2 +-
include/linux/platform_data/cw1200_platform.h | 81 ---------------------------
include/linux/platform_data/net-cw1200.h | 81 +++++++++++++++++++++++++++
4 files changed, 83 insertions(+), 83 deletions(-)
delete mode 100644 include/linux/platform_data/cw1200_platform.h
create mode 100644 include/linux/platform_data/net-cw1200.h
diff --git a/drivers/net/wireless/cw1200/cw1200_sdio.c b/drivers/net/wireless/cw1200/cw1200_sdio.c
index 913a3eb..808257e 100644
--- a/drivers/net/wireless/cw1200/cw1200_sdio.c
+++ b/drivers/net/wireless/cw1200/cw1200_sdio.c
@@ -21,7 +21,7 @@
#include "cw1200.h"
#include "hwbus.h"
-#include <linux/platform_data/cw1200_platform.h>
+#include <linux/platform_data/net-cw1200.h>
#include "hwio.h"
MODULE_AUTHOR("Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>");
diff --git a/drivers/net/wireless/cw1200/cw1200_spi.c b/drivers/net/wireless/cw1200/cw1200_spi.c
index 5eacf9e..61406e7 100644
--- a/drivers/net/wireless/cw1200/cw1200_spi.c
+++ b/drivers/net/wireless/cw1200/cw1200_spi.c
@@ -26,7 +26,7 @@
#include "cw1200.h"
#include "hwbus.h"
-#include <linux/platform_data/cw1200_platform.h>
+#include <linux/platform_data/net-cw1200.h>
#include "hwio.h"
MODULE_AUTHOR("Solomon Peachy <speachy@sagrad.com>");
diff --git a/include/linux/platform_data/cw1200_platform.h b/include/linux/platform_data/cw1200_platform.h
deleted file mode 100644
index c6fbc3c..0000000
--- a/include/linux/platform_data/cw1200_platform.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2011
- *
- * Author: Dmitry Tarnyagin <dmitry.tarnyagin@stericsson.com>
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#ifndef CW1200_PLAT_H_INCLUDED
-#define CW1200_PLAT_H_INCLUDED
-
-struct cw1200_platform_data_spi {
- u8 spi_bits_per_word; /* REQUIRED */
- u16 ref_clk; /* REQUIRED (in KHz) */
-
- /* All others are optional */
- bool have_5ghz;
- int reset; /* GPIO to RSTn signal (0 disables) */
- int powerup; /* GPIO to POWERUP signal (0 disables) */
- int (*power_ctrl)(const struct cw1200_platform_data_spi *pdata,
- bool enable); /* Control 3v3 / 1v8 supply */
- int (*clk_ctrl)(const struct cw1200_platform_data_spi *pdata,
- bool enable); /* Control CLK32K */
- const u8 *macaddr; /* if NULL, use cw1200_mac_template module parameter */
- const char *sdd_file; /* if NULL, will use default for detected hw type */
-};
-
-struct cw1200_platform_data_sdio {
- u16 ref_clk; /* REQUIRED (in KHz) */
-
- /* All others are optional */
- bool have_5ghz;
- bool no_nptb; /* SDIO hardware does not support non-power-of-2-blocksizes */
- int reset; /* GPIO to RSTn signal (0 disables) */
- int powerup; /* GPIO to POWERUP signal (0 disables) */
- int irq; /* IRQ line or 0 to use SDIO IRQ */
- int (*power_ctrl)(const struct cw1200_platform_data_sdio *pdata,
- bool enable); /* Control 3v3 / 1v8 supply */
- int (*clk_ctrl)(const struct cw1200_platform_data_sdio *pdata,
- bool enable); /* Control CLK32K */
- const u8 *macaddr; /* if NULL, use cw1200_mac_template module parameter */
- const char *sdd_file; /* if NULL, will use default for detected hw type */
-};
-
-
-/* An example of SPI support in your board setup file:
-
- static struct cw1200_platform_data_spi cw1200_platform_data = {
- .ref_clk = 38400,
- .spi_bits_per_word = 16,
- .reset = GPIO_RF_RESET,
- .powerup = GPIO_RF_POWERUP,
- .macaddr = wifi_mac_addr,
- .sdd_file = "sdd_sagrad_1091_1098.bin",
- };
- static struct spi_board_info myboard_spi_devices[] __initdata = {
- {
- .modalias = "cw1200_wlan_spi",
- .max_speed_hz = 52000000,
- .bus_num = 0,
- .irq = WIFI_IRQ,
- .platform_data = &cw1200_platform_data,
- .chip_select = 0,
- },
- };
-
- */
-
-/* An example of SDIO support in your board setup file:
-
- static struct cw1200_platform_data_sdio my_cw1200_platform_data = {
- .ref_clk = 38400,
- .have_5ghz = false,
- .sdd_file = "sdd_myplatform.bin",
- };
- cw1200_sdio_set_platform_data(&my_cw1200_platform_data);
-
- */
-
-void __init cw1200_sdio_set_platform_data(struct cw1200_platform_data_sdio *pdata);
-
-#endif /* CW1200_PLAT_H_INCLUDED */
diff --git a/include/linux/platform_data/net-cw1200.h b/include/linux/platform_data/net-cw1200.h
new file mode 100644
index 0000000..c6fbc3c
--- /dev/null
+++ b/include/linux/platform_data/net-cw1200.h
@@ -0,0 +1,81 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2011
+ *
+ * Author: Dmitry Tarnyagin <dmitry.tarnyagin@stericsson.com>
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef CW1200_PLAT_H_INCLUDED
+#define CW1200_PLAT_H_INCLUDED
+
+struct cw1200_platform_data_spi {
+ u8 spi_bits_per_word; /* REQUIRED */
+ u16 ref_clk; /* REQUIRED (in KHz) */
+
+ /* All others are optional */
+ bool have_5ghz;
+ int reset; /* GPIO to RSTn signal (0 disables) */
+ int powerup; /* GPIO to POWERUP signal (0 disables) */
+ int (*power_ctrl)(const struct cw1200_platform_data_spi *pdata,
+ bool enable); /* Control 3v3 / 1v8 supply */
+ int (*clk_ctrl)(const struct cw1200_platform_data_spi *pdata,
+ bool enable); /* Control CLK32K */
+ const u8 *macaddr; /* if NULL, use cw1200_mac_template module parameter */
+ const char *sdd_file; /* if NULL, will use default for detected hw type */
+};
+
+struct cw1200_platform_data_sdio {
+ u16 ref_clk; /* REQUIRED (in KHz) */
+
+ /* All others are optional */
+ bool have_5ghz;
+ bool no_nptb; /* SDIO hardware does not support non-power-of-2-blocksizes */
+ int reset; /* GPIO to RSTn signal (0 disables) */
+ int powerup; /* GPIO to POWERUP signal (0 disables) */
+ int irq; /* IRQ line or 0 to use SDIO IRQ */
+ int (*power_ctrl)(const struct cw1200_platform_data_sdio *pdata,
+ bool enable); /* Control 3v3 / 1v8 supply */
+ int (*clk_ctrl)(const struct cw1200_platform_data_sdio *pdata,
+ bool enable); /* Control CLK32K */
+ const u8 *macaddr; /* if NULL, use cw1200_mac_template module parameter */
+ const char *sdd_file; /* if NULL, will use default for detected hw type */
+};
+
+
+/* An example of SPI support in your board setup file:
+
+ static struct cw1200_platform_data_spi cw1200_platform_data = {
+ .ref_clk = 38400,
+ .spi_bits_per_word = 16,
+ .reset = GPIO_RF_RESET,
+ .powerup = GPIO_RF_POWERUP,
+ .macaddr = wifi_mac_addr,
+ .sdd_file = "sdd_sagrad_1091_1098.bin",
+ };
+ static struct spi_board_info myboard_spi_devices[] __initdata = {
+ {
+ .modalias = "cw1200_wlan_spi",
+ .max_speed_hz = 52000000,
+ .bus_num = 0,
+ .irq = WIFI_IRQ,
+ .platform_data = &cw1200_platform_data,
+ .chip_select = 0,
+ },
+ };
+
+ */
+
+/* An example of SDIO support in your board setup file:
+
+ static struct cw1200_platform_data_sdio my_cw1200_platform_data = {
+ .ref_clk = 38400,
+ .have_5ghz = false,
+ .sdd_file = "sdd_myplatform.bin",
+ };
+ cw1200_sdio_set_platform_data(&my_cw1200_platform_data);
+
+ */
+
+void __init cw1200_sdio_set_platform_data(struct cw1200_platform_data_sdio *pdata);
+
+#endif /* CW1200_PLAT_H_INCLUDED */
--
1.8.2.1
prev parent reply other threads:[~2013-06-02 15:35 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-02 15:35 [PATCH -next 1/2] cw1200: Rework SDIO platform support to prevent build problems Solomon Peachy
2013-06-02 15:35 ` Solomon Peachy [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1370187332-18813-2-git-send-email-pizza@shaftnet.org \
--to=pizza@shaftnet.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox